图片仅供参考

详细数据请看参考数据手册

Datasheet下载
  • 型号: DTDG14GPT100
  • 制造商: ROHM Semiconductor
  • 库位|库存: xxxx|xxxx
  • 要求:
数量阶梯 香港交货 国内含税
+xxxx $xxxx ¥xxxx

查看当月历史价格

查看今年历史价格

DTDG14GPT100产品简介:

ICGOO电子元器件商城为您提供DTDG14GPT100由ROHM Semiconductor设计生产,在icgoo商城现货销售,并且可以通过原厂、代理商等渠道进行代购。 DTDG14GPT100价格参考¥6.11-¥6.11。ROHM SemiconductorDTDG14GPT100封装/规格:晶体管 - 双极 (BJT) - 单,预偏置, Pre-Biased Bipolar Transistor (BJT) NPN - Pre-Biased 60V 1A 80MHz 2W Surface Mount MPT3。您可以下载DTDG14GPT100参考资料、Datasheet数据手册功能说明书,资料中有DTDG14GPT100 详细功能的应用电路图电压和使用方法及教程。

产品参数 图文手册 常见问题
参数 数值
产品目录

分立半导体产品

描述

TRANS PREBIAS NPN 2W MPT3开关晶体管 - 偏压电阻器 DIGITAL NPN 60V 1A

产品分类

晶体管(BJT) - 单路﹐预偏压式分离式半导体

品牌

Rohm Semiconductor

产品手册

点击此处下载产品Datasheet

产品图片

rohs

符合RoHS无铅 / 符合限制有害物质指令(RoHS)规范要求

产品系列

晶体管,开关晶体管 - 偏压电阻器,ROHM Semiconductor DTDG14GPT100-

数据手册

点击此处下载产品Datasheet

产品型号

DTDG14GPT100

不同 Ib、Ic时的 Vce饱和值(最大值)

400mV @ 5mA,500mA

不同 Ic、Vce 时的DC电流增益(hFE)(最小值)

300 @ 500mA,2V

产品目录绘图

产品目录页面

点击此处下载产品Datasheet

产品种类

开关晶体管 - 偏压电阻器

供应商器件封装

MPT3

其它名称

DTDG14GPT100TR

功率-最大值

2W

功率耗散

0.5 W

包装

带卷 (TR)

发射极-基极电压VEBO

5 V

商标

ROHM Semiconductor

安装类型

表面贴装

安装风格

SMD/SMT

封装

Reel

封装/外壳

TO-243AA

封装/箱体

SC-62

峰值直流集电极电流

1000 mA

工厂包装数量

1000

晶体管极性

NPN

晶体管类型

NPN - 预偏压

最大工作温度

+ 150 C

最小工作温度

- 55 C

标准包装

1,000

电压-集射极击穿(最大值)

60V

电流-集电极(Ic)(最大值)

1A

电流-集电极截止(最大值)

500nA(ICBO)

电阻器-发射极基底(R2)(Ω)

10k

电阻器-基底(R1)(Ω)

-

直流集电极/BaseGainhfeMin

300

配置

Single

集电极—发射极最大电压VCEO

60 V

集电极连续电流

1 A

频率-跃迁

80MHz

推荐商品

型号:DDTC122TU-7-F

品牌:Diodes Incorporated

产品名称:分立半导体产品

获取报价

型号:MMUN2114LT1G

品牌:ON Semiconductor

产品名称:分立半导体产品

获取报价

型号:DTC143XUBTL

品牌:Rohm Semiconductor

产品名称:分立半导体产品

获取报价

型号:PBRN123ET,215

品牌:Nexperia USA Inc.

产品名称:分立半导体产品

获取报价

型号:BCR 183F E6327

品牌:Infineon Technologies

产品名称:分立半导体产品

获取报价

型号:DTC015TEBTL

品牌:Rohm Semiconductor

产品名称:分立半导体产品

获取报价

型号:DTA144TET1G

品牌:ON Semiconductor

产品名称:分立半导体产品

获取报价

型号:UNR222300L

品牌:Panasonic Electronic Components

产品名称:分立半导体产品

获取报价

样品试用

万种样品免费试用

去申请
DTDG14GPT100 相关产品

FJV3101RMTF

品牌:ON Semiconductor

价格:¥0.12-¥0.14

DTA143ZETL

品牌:Rohm Semiconductor

价格:¥0.11-¥0.11

DTC043EMT2L

品牌:Rohm Semiconductor

价格:¥0.38-¥2.11

DDTC143TCA-7

品牌:Diodes Incorporated

价格:

DTC114TKA-TP

品牌:Micro Commercial Co

价格:

DDTC124XKA-7-F

品牌:Diodes Incorporated

价格:

FJN3314RTA

品牌:ON Semiconductor

价格:¥询价-¥询价

NSBC144WF3T5G

品牌:ON Semiconductor

价格:

PDF Datasheet 数据手册内容提取

DTDG14GP 1A/60V Digital Transistor (with built-in resistor and zener diode) Datasheet llOutline Parameter Value SOT-89   V 60±10V CEO SC-62    I 1A C       R 10kΩ         (MPT3)                         llFeatures llInner circuit 1)High h . FE   300(Min.) (V /I =2V/0.5A) CE C 2)Low saturation voltage.   (V =400mV at I /I =500mA/5mA) CE(sat) C B 3)Built-in zener diode gives strong  protection against reverse surge  by L-load (an inductive load). llApplication DRIVER llPackaging specifications                                             Basic Package Taping Reel size Tape width Part No. Package ordering Marking size code (mm) (mm) unit.(pcs) SOT-89 DTDG14GP 4540 T100 180 12 1000 E01 (MPT3)                                                                                           www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. 1/5 20150925 - Rev.001

DTDG14GP                                 Datasheet llAbsolute maximum ratings (T = 25°C) a Parameter Symbol Values Unit Collector-base voltage V 60±10 V CBO Collector-emitter voltage V 60±10 V CEO Emitter-base voltage V 5 V EBO I 1 A C Collector current I *1 2 A CP P *2 0.5 W D Power dissipation P *3 2.0 W D Junction temperature T 150 ℃ j Range of storage temperature T -55 to +150 ℃ stg llElectrical characteristics (T = 25°C) a Values Parameter Symbol Conditions Unit Min. Typ. Max. Collector-base breakdown BV I = 50μA 50 - 70 V voltage CBO C Collector-emitter breakdown BV I = 1mA 50 - 70 V voltage CEO C Emitter-base breakdown voltage BV I = 720μA 5 - - V EBO E Collector cut-off current I V = 40V - - 500 nA CBO CB Emitter cut-off current I V = 4V 300 - 580 μA EBO EB Collector-emitter saturation voltage V I = 500mA, I = 5mA - - 400 mV CE(sat) C B DC current gain h V = 2V, I =500mA 300 - - - FE CE C Emitter-base resistance R - 7 10 13 kΩ V = 5V, I = -100mA, Transition frequency f *4 CE E - 80 - MHz T f = 30MHz *1 Pw≦10ms, duty=1/2 *2 Each terminal mounted on a reference land. *3 Mounted on a 40×40×0.7mm ceramic board. *4 Characteristics of built-in transistor.                                                                                      www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. 2/5 20150925 - Rev.001

DTDG14GP                     Datasheet llElectrical characteristic curves (T =25°C) a Fig.1 Ground Emitter Propagation Fig.2 Typical Output Characteristics     Characteristics Fig.3 DC Current Gain vs. Collector Current Fig.4 Collector-Emitter Saturation Voltage     vs. Collector Current(I)                                                                                             www.rohm.com 3/5 20150925 - Rev.001 © 2015 ROHM Co., Ltd. All rights reserved.

DTDG14GP                     Datasheet llElectrical characteristic curves (T =25°C) a Fig.5 Collector-Emitter Saturation Voltage Fig.6 Safe Operating Area     vs. Collector Current(II)                                                                                             www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. 4/5 20150925 - Rev.001

DTDG14GP                   Datasheet llDimensions                                                                                             www.rohm.com 5/5 20150925 - Rev.001 © 2015 ROHM Co., Ltd. All rights reserved.

DDaattaasshheeeett Notice Precaution on using ROHM Products 1. Our Products are designed and manufactured for application in ordinary electronic equipments (such as AV equipment, OA equipment, telecommunication equipment, home electronic appliances, amusement equipment, etc.). If you intend to use our Products in devices requiring extremely high reliability (such as medical equipment (Note 1), transport equipment, traffic equipment, aircraft/spacecraft, nuclear power controllers, fuel controllers, car equipment including car accessories, safety devices, etc.) and whose malfunction or failure may cause loss of human life, bodily injury or serious damage to property (“Specific Applications”), please consult with the ROHM sales representative in advance. Unless otherwise agreed in writing by ROHM in advance, ROHM shall not be in any way responsible or liable for any damages, expenses or losses incurred by you or third parties arising from the use of any ROHM’s Products for Specific Applications. (Note1) Medical Equipment Classification of the Specific Applications JAPAN USA EU CHINA CLASSⅢ CLASSⅡb CLASSⅢ CLASSⅢ CLASSⅣ CLASSⅢ 2. ROHM designs and manufactures its Products subject to strict quality control system. However, semiconductor products can fail or malfunction at a certain rate. Please be sure to implement, at your own responsibilities, adequate safety measures including but not limited to fail-safe design against the physical injury, damage to any property, which a failure or malfunction of our Products may cause. The following are examples of safety measures: [a] Installation of protection circuits or other protective devices to improve system safety [b] Installation of redundant circuits to reduce the impact of single or multiple circuit failure 3. Our Products are designed and manufactured for use under standard conditions and not under any special or extraordinary environments or conditions, as exemplified below. Accordingly, ROHM shall not be in any way responsible or liable for any damages, expenses or losses arising from the use of any ROHM’s Products under any special or extraordinary environments or conditions. If you intend to use our Products under any special or extraordinary environments or conditions (as exemplified below), your independent verification and confirmation of product performance, reliability, etc, prior to use, must be necessary: [a] Use of our Products in any types of liquid, including water, oils, chemicals, and organic solvents [b] Use of our Products outdoors or in places where the Products are exposed to direct sunlight or dust [c] Use of our Products in places where the Products are exposed to sea wind or corrosive gases, including Cl2, H2S, NH3, SO2, and NO2 [d] Use of our Products in places where the Products are exposed to static electricity or electromagnetic waves [e] Use of our Products in proximity to heat-producing components, plastic cords, or other flammable items [f] Sealing or coating our Products with resin or other coating materials [g] Use of our Products without cleaning residue of flux (even if you use no-clean type fluxes, cleaning residue of flux is recommended); or Washing our Products by using water or water-soluble cleaning agents for cleaning residue after soldering [h] Use of the Products in places subject to dew condensation 4. The Products are not subject to radiation-proof design. 5. Please verify and confirm characteristics of the final or mounted products in using the Products. 6. In particular, if a transient load (a large amount of load applied in a short period of time, such as pulse. is applied, confirmation of performance characteristics after on-board mounting is strongly recommended. Avoid applying power exceeding normal rated power; exceeding the power rating under steady-state loading condition may negatively affect product performance and reliability. 7. De-rate Power Dissipation (Pd) depending on Ambient temperature (Ta). When used in sealed area, confirm the actual ambient temperature. 8. Confirm that operation temperature is within the specified range described in the product specification. 9. ROHM shall not be in any way responsible or liable for failure induced under deviant condition from what is defined in this document. Precaution for Mounting / Circuit board design 1. When a highly active halogenous (chlorine, bromine, etc.) flux is used, the residue of flux may negatively affect product performance and reliability. 2. In principle, the reflow soldering method must be used on a surface-mount products, the flow soldering method must be used on a through hole mount products. If the flow soldering method is preferred on a surface-mount products, please consult with the ROHM representative in advance. For details, please refer to ROHM Mounting specification Notice-PGA-E Rev.001 © 2015 ROHM Co., Ltd. All rights reserved.

DDaattaasshheeeett Precautions Regarding Application Examples and External Circuits 1. If change is made to the constant of an external circuit, please allow a sufficient margin considering variations of the characteristics of the Products and external components, including transient characteristics, as well as static characteristics. 2. You agree that application notes, reference designs, and associated data and information contained in this document are presented only as guidance for Products use. Therefore, in case you use such information, you are solely responsible for it and you must exercise your own independent verification and judgment in the use of such information contained in this document. ROHM shall not be in any way responsible or liable for any damages, expenses or losses incurred by you or third parties arising from the use of such information. Precaution for Electrostatic This Product is electrostatic sensitive product, which may be damaged due to electrostatic discharge. Please take proper caution in your manufacturing process and storage so that voltage exceeding the Products maximum rating will not be applied to Products. Please take special care under dry condition (e.g. Grounding of human body / equipment / solder iron, isolation from charged objects, setting of Ionizer, friction prevention and temperature / humidity control). Precaution for Storage / Transportation 1. Product performance and soldered connections may deteriorate if the Products are stored in the places where: [a] the Products are exposed to sea winds or corrosive gases, including Cl2, H2S, NH3, SO2, and NO2 [b] the temperature or humidity exceeds those recommended by ROHM [c] the Products are exposed to direct sunshine or condensation [d] the Products are exposed to high Electrostatic 2. Even under ROHM recommended storage condition, solderability of products out of recommended storage time period may be degraded. It is strongly recommended to confirm solderability before using Products of which storage time is exceeding the recommended storage time period. 3. Store / transport cartons in the correct direction, which is indicated on a carton with a symbol. Otherwise bent leads may occur due to excessive stress applied when dropping of a carton. 4. Use Products within the specified time after opening a humidity barrier bag. Baking is required before using Products of which storage time is exceeding the recommended storage time period. Precaution for Product Label QR code printed on ROHM Products label is for ROHM’s internal use only. Precaution for Disposition When disposing Products please dispose them properly using an authorized industry waste company. Precaution for Foreign Exchange and Foreign Trade act Since concerned goods might be fallen under listed items of export control prescribed by Foreign exchange and Foreign trade act, please consult with ROHM in case of export. Precaution Regarding Intellectual Property Rights 1. All information and data including but not limited to application example contained in this document is for reference only. ROHM does not warrant that foregoing information or data will not infringe any intellectual property rights or any other rights of any third party regarding such information or data. 2. ROHM shall not have any obligations where the claims, actions or demands arising from the combination of the Products with other articles such as components, circuits, systems or external equipment (including software). 3. No license, expressly or implied, is granted hereby under any intellectual property rights or other rights of ROHM or any third parties with respect to the Products or the information contained in this document. Provided, however, that ROHM will not assert its intellectual property rights or other rights against you or your customers to the extent necessary to manufacture or sell products containing the Products, subject to the terms and conditions herein. Other Precaution 1. This document may not be reprinted or reproduced, in whole or in part, without prior written consent of ROHM. 2. The Products may not be disassembled, converted, modified, reproduced or otherwise changed without prior written consent of ROHM. 3. In no event shall you use in any way whatsoever the Products and the related technical information contained in the Products or this document for any military purposes, including but not limited to, the development of mass-destruction weapons. 4. The proper names of companies or products described in this document are trademarks or registered trademarks of ROHM, its affiliated companies or third parties. Notice-PGA-E Rev.001 © 2015 ROHM Co., Ltd. All rights reserved.

DDaattaasshheeeett General Precaution 1. Before you use our Products, you are requested to carefully read this document and fully understand its contents. ROHM shall not be in any way responsible or liable for failure, malfunction or accident arising from the use of a ny ROHM’s Products against warning, caution or note contained in this document. 2. All information contained in this document is current as of the issuing date and subj ect to change without any prior notice. Before purchasing or using ROHM’s Products, please confirm the latest information with a ROHM sale s representative. 3. The information contained in this document is provided on an “as is” basis and ROHM does not warrant that all information contained in this document is accurate an d/or error-free. ROHM shall not be in any way responsible or liable for any damages, expenses or losses incurred by you or third parties resulting from inaccuracy or errors of or concerning such information. Notice – WE Rev.001 © 2015 ROHM Co., Ltd. All rights reserved.

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: R OHM Semiconductor: DTDG14GPT100