DATA SHEET SKY13374-397LF: 300 kHz to 6.0 GHz SPDT Switch Applications RRFF11  Dual-band wireless LANs (802.11 a/b/g/n)  Diversity antenna switching RRFF33 RRFF22  WCDMA handsets and data cards Features DDeeccooddeerr  Broadband frequency range: 300 kHz to 6.0 GHz S2304  Low insertion loss: 0.35 dB @ 1 GHz, 0.8 dB @ 6 GHz  No external DC blocking capacitors required VV11 VV22 VVBBAATTTT  Positive low control voltage: 1.65 to 3.0 V (VCTRL), 2.5 to 4.8 V Figure 1. SKY13374-397LF Block Diagram (VBATT)  Small, QFN (12-pin, 2 x 2 mm) package Description (MSL1, 260 C per JEDEC J-STD-020) The SKY13374-397LF is a CMOS silicon-on-insulator (SOI) single- pole, double-throw (SPDT) WCDMA band switch. The Skyworks GreenTM products are compliant with high-linearity performance and low insertion loss achieved by the all applicable legislation and are halogen-free. device makes it an ideal choice for medium to high power For additional information, refer to Skyworks WCDMA handset and data card applications. Definition of GreenTM, document number The high 0.1 dB input compression point (IP0.1dB) and advance SQ04–0074. proprietary fabrication process enable exceptional WCDMA harmonic and adjacent channel power (ACP) performance. Excellent insertion loss and isolation is maintained over WCDMA bands 1 to 6 and 8 to 11. D 2 D N F N G R G The SKY13374-397LF SPDT switch is provided in a compact 12 11 10 Quad Flat No-Lead (QFN) 2 x 2 mm package with 0.5 mm lead pitch for ease of manufacturing. A functional block diagram is N/C 1 9 VBATT shown in Figure 1. The pin configuration and package are shown in Figure 2. Signal pin assignments and functional pin RF1 2 8 V2 descriptions are provided in Table 1. GND 3 7 V1 4 5 6 D 3 D N F N G R G S2303 Figure 2. SKY13374-397LF Pinout (Top View) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 201447L • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • September 18, 2015 1

DATA SHEET • SKY13374-397LF: SPDT SWITCH Table 1. SKY13374-397LF Signal Descriptions (Note 1) Pin Name Description Pin Name Description 1 N/C No connection 7 V1 DC control voltage. See Table 4. 2 RF1 RF port 1 8 V2 DC control voltage. See Table 4. 3 GND Ground 9 VBATT DC power supply. 4 GND Ground 10 GND Ground 5 RF3 RF port 3 11 RF2 RF port 2 6 GND Ground 12 GND Ground Note 1: Exposed pad must be properly grounded using a low impedance path. Functional Description Electrical and Mechanical Specifications Switching is controlled by two control voltage inputs (V1 and V2). The absolute maximum ratings of the SKY13374-397LF are Depending on the logic voltage level applied to these pins, the provided in Table 2. Electrical specifications are provided in RF1 pin is connected to one of two switched RF outputs (RF2 or Table 3. RF3) using a low insertion loss path, while the path between the The state of the SKY13374-397LF is determined by the logic RF1 pin and the other RF path is in a high isolation state. provided in Table 4. An internal negative voltage generator and decoder eliminate the Typical performance characteristics of the SKY13374-397LF are need for external DC blocking capacitors on the RF ports. No illustrated in Figures 3 through 5. external components are required for proper operation. DC decoupling capacitors may be added on the VBATT and control lines if necessary. Shutdown mode is enabled by connecting both control pins (V1 and V2) to logic low. This mode reduces the overall current consumption of the device to 5 μA typical. Table 2. SKY13374-397LF Absolute Maximum Ratings (Note 1) Parameter Symbol Minimum Maximum Units Supply voltage VBATT 2.5 4.8 V Control voltage VCTL 1.65 3.00 V Input power PIN +39 dBm Storage temperature TSTG –40 +125 C Operating temperature TOP –40 +85 C Note 1: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. CAUTION: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 2 September 18, 2015 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201447L

DATA SHEET • SKY13374-397LF: SPDT SWITCH Table 3. SKY13374-397LF Electrical Specifications (Note 1) (VBATT = 2.5 to 4.8 V, V1/V2 = 0/1.65 to 3.0 V, TOP = +25 C, PIN = 0 dBm, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted) Parameter Symbol Test Condition Min Typical Max Units RF Specifications Insertion loss IL RF1 to RF2/RF3: 300 kHz to 1.0 GHz 0.35 0.40 dB 1.0 to 2.2 GHz 0.45 0.55 dB 2.2 to 3.0 GHz 0.50 0.60 dB 4.9 to 6.0 GHz 0.8 1.00 dB Isolation Iso RF1 to RF2/RF3: 300 kHz to 2.2 GHz 30 34 dB 2.2 to 3.0 GHz 25 28 dB 4.9 to 6.0 GHz 18 22 dB Shutdown isolation Iso_SHUTDOWN 16 dB Return loss |S11| RF1 to RF2/RF3, 300 kHz to 6.0 GHz 17 dB 0.1 dB input compression point IP0.1dB RF1 to RF2/RF3, 0.5 to 6.0 GHz +39 dBm Third order input intercept point IIP3 0.8 to 3.0 GHz, Δf = 1 MHz, PIN = +26 dBm/tone +68 dBm Switching Speed Specifications Switching speed @ 2.45 GHz 50% VCTL to 90% RF 1200 ns 50% VCTL to 10% RF 1200 ns 10% RF to 90% RF rise 200 ns 90% RF to 10% RF fall 150 ns Startup time Shutdown to any RF switch state 20 μs DC Specifications Control voltage: V1, V2 High 1.65 3.00 V Low 0 0.30 V Supply voltage VBATT 2.5 4.8 V Supply current IBATT VBATT = 3 V 40 μA Control current ICTL V1/V2 = 1.8 V 2 μA Shutdown mode supply current IOFF V1/V2 = 0 V, VBATT = 1.8 V 5 μA Note 1: Performance is guaranteed only under the conditions listed in this table. Table 4. SKY13374-397LF Truth Table V1 V2 State 0 0 Shutdown mode 1 0 RF1 to RF2 0 1 RF1 to RF3 Note: 1 = 1.65 to 3.0 V 0 = –0.1 to 0 V Any state other than described in this table places the switch into an undefined state. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 201447L • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 18, 2015 3

DATA SHEET • SKY13374-397LF: SPDT SWITCH Typical Performance Characteristics (VCTL = 0 V and +3.0 V, TOP = +25 C, PIN = 0 dBm, Characteristic Impedance [Zo] = 50 Ω, Unless Otherwise Noted) 0 0 RF1 to RF2 –0.1 RF1 to RF3 –10 –0.2 B) –0.3 –20 oss (d –0.4 n (dB) –30 sertion L ––00..65 Isolatio –40 In –0.7 –50 –0.8 –60 –0.9 –70 –1.0 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 Frequency (GHz) Frequency (GHz) Figure 3. Typical Insertion Loss vs Frequency Figure 4. Typical Isolation vs Frequency (RF1 to RF2 Insertion Loss State) 0 –10 –20 B) n (d –30 o olati –40 s I –50 –60 –70 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 Frequency (GHz) Figure 5. Typical Isolation vs Frequency (RF1 to RF3 Insertion Loss State) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 4 September 18, 2015 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201447L

DATA SHEET • SKY13374-397LF: SPDT SWITCH Evaluation Board Description Package and Handling Information The SKY13374-397LF Evaluation Board is used to test the Instructions on the shipping container label regarding exposure to performance of the SKY13374-397LF SPDT Switch. moisture after the container seal is broken must be followed. Otherwise, problems related to moisture absorption may occur An Evaluation Board schematic diagram is provided in Figure 6. when the part is subjected to high temperature during solder An assembly drawing for the Evaluation Board is shown in assembly. Figure 7. The SKY13374-397LF is rated to Moisture Sensitivity Level 1 (MSL1) at 260 C. It can be used for lead or lead-free soldering. Package Dimensions For additional information, refer to the Skyworks Application Note, Solder Reflow Information, document number 200164. The PCB layout footprint for the SKY13374-397LF is provided in Figure 8. Typical part markings are shown in Figure 9. Package Care must be taken when attaching this product, whether it is dimensions for the 12-pin QFN are shown in Figure 10, and tape done manually or in a production solder reflow environment. and reel dimensions are provided in Figure 11. Production quantities of this product are shipped in a standard tape and reel format. RF Port 2 12 11 10 D 2 D N F N G R G × 1 N/C VBATT 9 DC Power Supply 2 8 RF Port 1 RF1 V2 DC Control 2 3 7 GND V1 DC Control 1 D 3 D N F N G R G 4 5 6 RF Port 3 S2568 Figure 6. SKY13374-397LF Evaluation Board Schematic Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 201447L • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 18, 2015 5

DATA SHEET • SKY13374-397LF: SPDT SWITCH S3357 Figure 7. SKY13374-397LF Evaluation Board Assembly Diagram 12X 0.710 Part Outline Pin 12 12X 0.440 R0.20 Pin 1 Indicator 12X 0.200 Pin 1 0.500 Pitch 2X 0.380 Exposed Solder Area 2X 0.380 All measurements in millimeters S3580 Figure 8. SKY13374-397LF PCB Layout Footprint (Top View) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 6 September 18, 2015 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201447L

DATA SHEET • SKY13374-397LF: SPDT SWITCH Pin 1 Indicator Skyworks Part Number Y0328 Figure 9. Typical Part Markings (Top View) –C– SeatingPlane 0.92 +0.10/–0.15 2.00 –A– 0.02 +0.03/–0.02 (0.460) R0.20 –B– Pin 1 Indicator Pin 1 Indicator Detail A Pin 1 2.00 0.92 +0.10/–0.15 (0.460) 2X 0.05 C 0.55 + 0.05/–0.04 12X 3 Exposed Pad 0.50 2X 0.05 C 0.05 C 0.05 C 12X 0.15 Min. Top View Side View Bottom View 0.29 ± 0.075 Notes: 1. All measurements are in millimeters. 2. Dimensions and tolerances according to ASME Y14.5M-1994. 0.2 ± 0.05 3. Coplanarity applies to the terminals and all other bottom surface metallization. 4. Dimension applies to metallized terminal. If the terminal has a radius on its end, the width dimension should not be measured in that radius area. 4 0.10 M C A B Detail A Y2356 Figure 10. SKY13374-397LF Package Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 201447L • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 18, 2015 7

DATA SHEET • SKY13374-397LF: SPDT SWITCH 2.00 ± 0.05 4.00 ± 0.10 Ø1.50 + 0.10/–0.00 1.75 ± 0.10 0.23 ± 0.05 Pin 1 A 7º 2.25 ± 0.05 3.50 ± 0.05 8.00 ± 0.20 B B A 4.00 ± 0.10 0.70 ± 0.05 (Ko) Section A 7º 2.25 ± 0.05 Section B Notes: 1. Carrier tape must meet all requirements of Skyworks GP01-D232 procurement spec for tape and reel shipping. 2. Carrier tape shall be black conductive polycarbonate bakeable material at 125 ˚C temperature. 3. Cover tape shall be transparent conductive with 5.40 mm width. 4. ESD-surface resistivity must meet all ESD requirements of Skyworks specified on GP01-D232. ts737 5. All measurements are in millimeters. Figure 11. SKY13374-397LF Tape and Reel Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 8 September 18, 2015 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201447L

DATA SHEET • SKY13374-397LF: SPDT SWITCH Ordering Information Model Name Manufacturing Part Number Evaluation Board Part Number SKY13374-397LF SPDT Switch SKY13374-397LF SKY13374-397LF-EVB Copyright © 2010-2013, 2015 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 201447L • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 18, 2015 9