DATA SHEET SKY13317-373LF: 20 MHz to 6.0 GHz pHEMT GaAs SP3T Switch Applications RF3 V3  802.11 a/b/g/n WLAN networks  Bluetooth® systems Features  Positive low voltage control: 0/1.8 to 5.0 V RFC RF2  Low insertion loss: 0.5 dB @ 2.5 GHz, 0.9 dB @ 6 GHz V2  High isolation: 25 dB up to 6 GHz  Excellent linearity performance: P1dB = +29 dBm  Miniature, ultra-thin MLP (8-pin, 1.5 x 1.5 mm) package (MSL1, 260 C per JEDEC J-STD-020) Y1481 V1 RF1 Figure 1. SKY13317-373LF Block Diagram Skyworks Green™ products are compliant with all applicable legislation and are halogen-free. Description For additional information, refer to Skyworks Definition of Green™, document number The SKY13317-373LF is a GaAs pHEMT single-pole, triple-throw SQ04-0074. (SP3T) antenna switch that operates in the 20 MHz to 6.0 GHz frequency range. Switching between the antenna (RFC signal) and the RF1, RF2, and RF3 ports is accomplished with three control voltages. RFC 1 8 RF3 The low loss, high isolation, high linearity, small size, and low cost make this switch ideal for all WLAN and Bluetooth systems operating in the 2.4 to 2.5 GHz and 4.9 to 5.9 GHz bands. N/C 2 7 V3 The SKY13317-373LF is manufactured in a compact, 1.5 x 1.5 mm, 8-pin Micro Leadframe (MLP) package. A functional V1 3 6 V2 block diagram is shown in Figure 1. The pin configuration and package are shown in Figure 2. Signal pin assignments and functional pin descriptions are provided in Table 1. RF1 4 5 RF2 S1868a Figure 2. SKY13317-373LF Pinout – 8-Pin MLP (Top View) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 200914K • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 13, 2014 1

DATA SHEET • SKY13317-373LF: SP3T SWITCH Table 1. SKY13317-373LF Signal Descriptions Pin Name Description Pin Name Description 1 RFC Antenna. DC blocking capacitor required. 5 RF2 RF port 2. DC blocking capacitor required. 2 N/C No connect 6 V2 Switch logic control (see Table 4) 3 V1 Switch logic control (see Table 4) 7 V3 Switch logic control (see Table 4) 4 RF1 RF port 1. DC blocking capacitor required. 8 RF3 RF port 3. DC blocking capacitor required. Table 2. SKY13317-373LF Absolute Maximum Ratings (Note 1) Parameter Symbol Minimum Maximum Units Input power @ 0/3 V PIN +30 dBm Input power @ 0/5 V PIN +30 dBm Operating voltage VDD 8 V Operating temperature TOP –40 +100 C Storage temperature TSTG –65 +150 C Note 1: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. CAUTION: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times. Electrical and Mechanical Specifications The state of the SKY13317-373LF is determined by the logic provided in Table 4. The absolute maximum ratings of the SKY13317-373LF are provided in Table 2. Electrical specifications are provided in Table 3. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 2 October 13, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200914K

DATA SHEET • SKY13317-373LF: SP3T SWITCH Table 3. SKY13317-373LF Electrical Specifications (Note 1) (VHIGH = 1.8 to 5.0 V, TOP = +25 C, Unless Otherwise Noted) Parameter Symbol Test Condition Min Typical Max Units Insertion loss IL RFC to RF1, RF2, RF3: 0.02 to 1.0 GHz 0.40 0.45 dB 1.0 to 3.0 GHz 0.60 0.70 dB 3.0 to 6.0 GHz 0.80 1.20 dB 2.4 to 2.5 GHz 0.55 0.65 dB 4.9 to 5.9 GHz 0.80 dB Isolation ISO RFC to RF1, RF2, RF3: 0.02 to 1.0 GHz 24 27 dB 1.0 to 3.0 GHz 22 25 dB 3.0 to 6.0 GHz 22 25 dB 2.4 to 2.5 GHz 22 25 dB 4.9 to 5.9 GHz 25 dB Return loss (insertion loss state) |S11| RFC to RF1, RF2, RF3: 0.02 to 1.0 GHz 20 dB 1.0 to 3.0 GHz 20 dB 3.0 to 6.0 GHz 15 dB 2.4 to 2.5 GHz 25 dB 4.9 to 5.9 GHz 15 dB Switching speed: Rise time 10/90% RF 50 ns Fall time 90/10% RF 18 ns On time 50% control to 90/10% RF 55 ns Off time 50% control to 90/10% RF 20 ns Video feedthrough 50 mV 1 dB input compression point IP1dB 900 to 2450 MHz: VLOW = 0 V, VHIGH = 3.3 V +29.0 dBm VLOW = 0 V, VHIGH = 1.9 V +18.5 dBm VLOW = 0 V, VHIGH = 1.8 V +17.5 dBm 48 MHz, VLOW = 0 V, VHIGH = 3.3 V +26.0 dBm 3rd Order Input Intercept Point IIP3 900 to 2450 MHz, ΔF = 1 MHz, PIN = +17 dBm/tone VLOW = 0 V, VHIGH = 2.1 V +33 dBm VLOW = 0 V, VHIGH = 3.3 V +50 dBm Control voltage VLOW = 0 to 0.25 V @ 5 μA typical 0 V VHIGH = 1.8 to 5.0 V @ 10 μA typical 3.3 V Note 1: Performance is guaranteed only under the conditions listed in this table. Table 4. SKY13317-373LF Truth Table Low Insertion Loss Path V1 (Pin 3) V2 (Pin 6) V3 (Pin 7) RFC to RF1 High Low Low RFC to RF2 Low High Low RFC to RF3 Low Low High Note: “High” = 1.8 to 5.0 V. “Low” = 0 to 0.25 V. Any state other than described in this Table places the switch into an undefined state. An undefined state will not damage the device. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 200914K • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 13, 2014 3

DATA SHEET • SKY13317-373LF: SP3T SWITCH Typical Performance Characteristics (RFC to RF1, RF2, RF3 (0, 3.3 V), TOP = +25 C, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted) 0 0 RFC to RF1 RFC to RF1 -5 RFC to RF2 -0.2 RFC to RF2 RFC to RF3 RFC to RF3 B) -10 n Loss (d --2105 Loss (dB) --00..64 ur n nput Ret --3205 Insertio -0.8 I -1.0 -35 -40 -1.2 0 1000 2000 3000 4000 5000 6000 0 1000 2000 3000 4000 5000 6000 Frequency (MHz) Frequency (MHz) Figure 3. Input Return Loss (Insertion Loss State) vs Frequency Figure 4. Insertion Loss vs Frequency 0 0 RFC to RF2 RFC to RF1 -5 RFC to RF3 RFC to RF3 RF1 to RF2 -10 RF2 to RF1 -10 RF1 to RF3 RF2 to RF3 B) -15 B) -20 Isolation (d ---322050 Isolation (d --3400 -35 -50 -40 -45 -60 0 1000 2000 3000 4000 5000 6000 0 1000 2000 3000 4000 5000 6000 Frequency (MHz) Frequency (MHz) Figure 5. Isolation vs Frequency Figure 6. Isolation vs Frequency (RFC to RF1 Insertion Loss State) (RFC to RF2 Insertion Loss State) 0 RFC to RF1 -5 RFC to RF2 -10 RF3 to RF1 RF3 to RF2 -15 B) -20 d n ( -25 o ati -30 ol s I -35 -40 -45 -50 0 1000 2000 3000 4000 5000 6000 Frequency (MHz) Figure 7. Isolation vs Frequency (RFC to RF3 Insertion Loss State) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 4 October 13, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200914K

DATA SHEET • SKY13317-373LF: SP3T SWITCH Evaluation Board Description Package and Handling Information The SKY13317-373LF Evaluation Board is used to test the Instructions on the shipping container label regarding exposure to performance of the SKY13317-373LF SP3T Switch. An Evaluation moisture after the container seal is broken must be followed. Board schematic diagram is provided in Figure 8. An assembly Otherwise, problems related to moisture absorption may occur drawing for the Evaluation Board is shown in Figure 9. when the part is subjected to high temperature during solder assembly. The SKY13317-373LF is rated to Moisture Sensitivity Level 1 Package Dimensions (MSL1) at 260 C. It can be used for lead or lead-free soldering. The PCB layout footprint for the SKY13317-373LF is provided in Care must be taken when attaching this product, whether it is Figure 10. Typical case markings are shown in Figure 11. done manually or in a production solder reflow environment. Package dimensions for the 8-pin MLP are shown in Figure 12, Production quantities of this product are shipped in a standard and tape and reel dimensions are provided in Figure 13. tape and reel format. CBL 1 8 CBL Antenna RFC RF3 RF Port 3 2 7 × N/C V3 Switch Control (See Table 4) Switch Control 3 6 Switch Control V1 V2 (See Table 4) (See Table 4) CBL 4 5 CBL RF Port 1 RF1 RF2 RF Port 2 Note: CBL = 47 pF for >500 MHz operation; 220 pF for 50 to 500 MHz operation. Higher values recommended for lower frequency operation. Exposed paddle must be grounded. Use 10 nF blocking capacitors (CBL) for <50 MHz operation. S1925 Figure 8. SKY13317-373LF Evaluation Board Schematic Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 200914K • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 13, 2014 5

DATA SHEET • SKY13317-373LF: SP3T SWITCH RFC RF3 V1 V2 V3 GND RF1 RF2 S1926 Figure 9. SKY13317-373LF Evaluation Board Assembly Diagram 8X 0.55 8X 0.35 0.15 X 45° 8X 0.20 0.40 Pitch 0.60 1.20 0.20 0.05 0.20 9X Exposed Solder Area 0.35 0.70 S1924 Figure 10. SKY13317-373LF PCB Layout Footprint (Top View) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 6 October 13, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200914K

DATA SHEET • SKY13317-373LF: SP3T SWITCH Pin 1 Indicator S Skyworks Part Number 17 Figure 11. Typical Case Markings (Top View) Exposed Pad C 1.5 A Seating Plane Detail B 0P.in1 51 XIn 4d5ic°ator B Pin 1 0.02 +0.03/–0.02 Indicator Detail D 1.20 ± 0.05 Detail C 1.5 Detail A 2X 0.05 2X 0.05 C 0.127 Ref. 2X 0.20 0.40/0.50 2X 0.05 C 8X 3 0.70 ± 0.05 0.05 C 0.05 C Top View Side View Bottom View 0.175 ± 0.075 0.175 ± 0.075 0.175 ± 0.075 0.175 ± 0.05 0.175 ± 0.05 0.20 ± 0.05 0.07 M C A B 0.07 M C A B 0.05 M C 0.05 M C 0.07 M C A B 0.05 M C 0.15 0.15 0.15 Detail A Detail B Detail C Scale: 2X Scale: 2X Scale: 2X 1X This Rotation 1X This Rotation 2X This Rotation 1X Rotated 180° 1X Rotated 180° 2X Rotated 180° 8X 0.2 Min. 0.4 C L 0.2 Detail D Scale: 1X All measurements are in millimeters. Dimensioning and tolerancing according to ASME Y14.5M-1994. Coplanarity applies to the exposed heat sink slug as well as the terminals.. Plating requirement per source control drawing (SCD) 2504. Dimension applies to metalized terminal, not measured in radius area. S3450 Figure 12. SKY13317-373LF 8-Pin MLP Package Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 200914K • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 13, 2014 7

DATA SHEET • SKY13317-373LF: SP3T SWITCH 4.00 ± 0.10 ϕ1.50± 0.10 2.00 ± 0.05 0.20 ± 0.02 (T) 1.75 ± 0.10 Pin 1 5o Max ± 0.05 (Bo) A B A 3.50 ± 0.05 8.00 +0.30/–0.10 8 7 1. B 0.69 ± 0.05 (Ko) ϕ0.50± 0.05 B 5o Max 1.78 ± 0.05 (Ao) A Notes: 1. Carrier tape: black conductive polycarbonate or polystyrene. 2. Cover tape material: transparent conductive PSA. 3. Cover tape size: 5.4 mm width. 4. All measurements are in millimeters. 5. Pin 1 orientation is in lower left corner for SOT-666 packages. Pin 1 orientation is in upper left corner for 1.5 x 1.5 mm MLPD, QFN, and DFN packages. S1382a Figure 13. SKY13317-373LF Tape and Reel Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 8 October 13, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200914K

DATA SHEET • SKY13317-373LF: SP3T SWITCH Ordering Information Model Name Manufacturing Part Number Evaluation Board Part Number SKY13317-373LF: SP3T Switch SKY13317-373LF SKY13317-373LF-EVB Copyright © 2008-2011, 2013-2014 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 200914K • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 13, 2014 9