2SA1952 PNP -5A -60V Middle Power Transistor Datasheet lOutline Parameter Value CPT3 Collector V -60V CEO I -5A C Base Emitter 2SA1952 lFeatures (SC-63) 1) Suitable for Middle Power Driver <SOT-428> 2) Complementary NPN Types : 2SC5103 3) Low V CE(sat) V = -0.3V(Max.) (I /I = -3A/ -0.15A) CE(sat) C B V = -0.5V(Max.) (I /I = -4A / -0.2A) CE(sat) C B 4) Lead Free/RoHS Compliant. lInner circuit Collector lApplications Motor driver , LED driver Base Power supply Emitter lPackaging specifications Package Basic Taping Reel size Tape width Part No. Package size ordering Marking code (mm) (mm) (mm) unit (pcs) 2SA1952 CPT3 6595 TL 330 16 2,500 A1952 lAbsolute maximum ratings (Ta = 25°C) Parameter Symbol Values Unit Collector-base voltage V -100 V CBO Collector-emitter voltage V -60 V CEO Emitter-base voltage V -5 V EBO DC I -5 A C Collector current Pulsed I -10 A CP P *1 1 W D Power dissipation P *2 10 W D Junction temperature T 150 °C j Range of storage temperature T -55 to +150 °C stg *1 Mounted on a substrate *2 Tc=25°C www.rohm.com © 2013 ROHM Co., Ltd. All rights reserved. 1/6 2013.07 - Rev.B

2SA1952 Data Sheet lElectrical characteristics (Ta = 25°C) Parameter Symbol Conditions Min. Typ. Max. Unit Collector-emitter BV I = -1mA -60 - - V breakdown voltage CEO C Collector-base BV I = -50mA -100 - - V breakdown voltage CBO C Emitter-base BV I = -50mA -5 - - V breakdown voltage EBO E Collector cut-off current I V = -100V - - -10 mA CBO CB Emitter cut-off current I V = -5V - - -10 mA EBO EB I = -3A, I = -0.15A - - -0.3 V Collector-emitter C B saturation voltage VCE(sat)*1 I = -4A, I = -0.2A - - -0.5 V C B I = -3A, I = -0.15A - - -1.2 V Base-emitter C B V *1 saturation voltage BE(sat) I = -4A, I = -0.2A - - -1.5 V C B h 1*1 V = -2V, I = -1A 120 - 270 - FE CE C DC current gain h 2*1 V = -2V, I = -3A 40 - - - FE CE C V = -10V, I = 0.5A Transition frequency f *1 CE E - 80 - MHz T f=30MH Z V = -10V, I = 0A Output capacitance C CB E - 130 - pF ob f = 1MHz Turn-on time t *2 - - 0.3 ms on I = -3A C I = -0.15A Storage time t *2 B1 - - 1.5 ms stg I =0.15A B2 Fall time t *2 VCC⋍ -30V - - 0.3 ms f *1 Plused *2 See switching time test circuit lh rank categories FE Rank Q h 120 to 270 FE www.rohm.com © 2013 ROHM Co., Ltd. All rights reserved. 2/6 2013.07 - Rev.B

2SA1952 Data Sheet lElectrical characteristic curves(Ta = 25°C) Fig.1 Ground Emitter Propagation Characteristics Fig.2 Typical Output Characteristics A] A] [C T : I[C NT : I N E E R R R R U U C C R R O O T T C C E E L L L O L O C C BASE TO EMITTER VOLTAGE : V [V] COLECTOR TO EMITTE VOLTAGE : V [V] BE CE Fig.3 DC Current Gain vs. Collector Current (I) Fig.4 DC Current Gain vs. Collector Current (II) 1000 Ta=25ºC Pulsed E E F F h h N : N : AI AI G G NT NT 100 V = -5V E E CE R R -2V R R U U -1V C C C C D D 10 -0.01 -0.1 -1 -10 COLLECTOR CURRENT : I [A] COLLECTOR CURRENT : I [A] C C www.rohm.com © 2013 ROHM Co., Ltd. All rights reserved. 3/6 2013.07 - Rev.B

2SA1952 Data Sheet lElectrical characteristic curves(Ta = 25°C) Fig.5 Collector-Emitter Saturation Voltage Fig.6 Collector-Emitter Saturation Voltage vs. Collector Current (I) vs. Collector Current (II) -1 V] V] Ta=25ºC [at) [at) s s E( E( C C V V R GE : R GE : EA EA TT TT -0.1 MITOL MITOL IC / IB =20/1 EV EV 10/1 -N -N R R O O O O TTI TTI CA CA ER ER LU LU LT LT OA OA CS CS -0.01 -0.01 -0.1 -1 -10 COLLECTOR CURRENT : I [A] COLLECTOR CURRENT : I [A] C C Fig.7 Base-Emitter Saturation Voltage Fig.8 Gain Bandwidth Product vs. Collector Current vs. Emitter Current V] Hz] V [BE(sat) Y : f[MT E : NC G E A U T Q L E O R R V F EN N TO O T MITI TI -ERA NSI EU A ST R AA T BS COLLECTOR CURRENT : I [A] EMITTER CURRENT :I [A] C E www.rohm.com © 2013 ROHM Co., Ltd. All rights reserved. 4/6 2013.07 - Rev.B

2SA1952 Data Sheet lElectrical characteristic curves(Ta = 25°C) Fig.9 Collector output capacitance vs. Fig.10 Safe Operating Area Collector-Base Voltage F] p -100 b [ Co A] NCE : T : I [C -10 1ms A N 10ms T E CI R A R P U -1 UT CA OR C DC (Tc=25ºC) T P C UT E -0.1 L O L R CO Ta=25ºC O Single non repetitive pulse T C -0.01 E -0.1 -1 -10 -100 L L O C COLLECTOR - BASE VOLTAGE : V [V] COLLECTOR TO EMITTER VOLTAGE : V [V] CB CE www.rohm.com © 2013 ROHM Co., Ltd. All rights reserved. 5/6 2013.07 - Rev.B

2SA1952 Data Sheet lDimensions (Unit : mm) A2 D B A b1 c1 CPT3 2 L 3 L E H A1 4 b2 L b3 L L1 Lp c e b x B A A3 l3 l2 l1 5 b 6 b e Pattern of terminal position areas [Not a recommended pattern of soldering pads] MILIMETERS INCHES DIM MIN MAX MIN MAX A1 0.00 0.15 0.000 0.006 A2 2.20 2.50 0.087 0.098 A3 0.25 0.010 b 0.55 0.75 0.022 0.030 b1 5.00 5.30 0.197 0.209 b2 5.00 0.197 b3 0.75 0.030 c 0.40 0.60 0.016 0.024 c1 0.40 0.60 0.016 0.024 D 6.30 6.70 0.248 0.264 E 5.40 5.80 0.213 0.228 e 2.30 0.091 HE 9.00 10.00 0.354 0.394 L 2.20 2.80 0.087 0.110 L1 0.80 1.40 0.031 0.055 L2 1.20 1.80 0.047 0.071 L3 5.30 0.209 L4 0.90 0.035 Lp 1.00 1.60 0.039 0.063 x - 0.25 - 0.010 MILIMETERS INCHES DIM MIN MAX MIN MAX b5 - 1.00 - 0.04 b6 - 5.20 - 0.205 ｌ1 - 2.50 - 0.098 ｌ2 - 5.50 - 0.217 ｌ3 - 10.00 - 0.394 Dimension in mm / inches www.rohm.com © 2013 ROHM Co., Ltd. All rights reserved. 6/6 2013.07 - Rev.B

Notice Notes 1) The information contained herein is subject to change without notice. 2) Before you use our Products, please contact our sales representativeand verify the latest specifica- tions : 3) Although ROHM is continuously working to improve product reliability and quality, semicon- ductors can break down and malfunction due to various factors. Therefore, in order to prevent personal injury or fire arising from failure, please take safety measures such as complying with the derating characteristics, implementing redundant and fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no responsibility for any damages arising out of the use of our Poducts beyond the rating specified by ROHM. 4) Examples of application circuits, circuit constants and any other information contained herein are provided only to illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. 5) The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM or any other parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of such technical information. 6) The Products are intended for use in general electronic equipment (i.e. AV/OA devices, communi- cation, consumer systems, gaming/entertainment sets) as well as the applications indicated in this document. 7) The Products specified in this document are not designed to be radiation tolerant. 8) For use of our Products in applications requiring a high degree of reliability (as exemplified below), please contact and consult with a ROHM representative : transportation equipment (i.e. cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety equipment, medical systems, servers, solar cells, and power transmission systems. 9) Do not use our Products in applications requiring extremely high reliability, such as aerospace equipment, nuclear power control systems, and submarine repeaters. 10) ROHM shall have no responsibility for any damages or injury arising from non-compliance with the recommended usage conditions and specifications contained herein. 11) ROHM has used reasonable care to ensur the accuracy of the information contained in this document. However, ROHM does not warrants that such information is error-free, and ROHM shall have no responsibility for any damages arising from any inaccuracy or misprint of such information. 12) Please use the Products in accordance with any applicable environmental laws and regulations, such as the RoHS Directive. For more details, including RoHS compatibility, please contact a ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting non-compliance with any applicable laws or regulations. 13) When providing our Products and technologies contained in this document to other countries, you must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the US Export Administration Regulations and the Foreign Exchange and Foreign Trade Act. 14) This document, in part or in whole, may not be reprinted or reproduced without prior consent of ROHM. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com R1102A © 2013 ROHM Co., Ltd. All rights reserved.

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: R OHM Semiconductor: 2SA1952TLQ