STP03D200 2 kV NPN Darlington transistor Features ■ Extra high voltage capability ■ High gain characteristic TAB Application ■ Active start-up network in 3 phase S.M.P.S. (see application note AN2454) 3 2 1 Description TO-220 The STP03D200 is made by two extra high voltage NPN transistors in Darlington configuration housed in a single package. The resulting device shows high gain performance. Figure 1. Internal schematic diagram C (2, TAB) B (1) E (3) SC09020 Table 1. Device summary Order code Marking Package Packaging STP03D200 P03D200 TO-220 Tube February 2010 Doc ID 14059 Rev 2 1/7 www.st.com 7

Electrical ratings STP03D200 1 Electrical ratings Table 2. Absolute maximum ratings Symbol Parameter Value Unit V Collector-base voltage (I = 0) 2000 V CBO E V Collector-emitter voltage (I = 0) 1200 V CEO B V Emitter-base voltage (I = 0) 20 V EBO C I Collector current 100 mA C I Collector peak current (t < 5 ms) 200 mA CM P P Total dissipation at T = 25 °C 40 W TOT c T Storage temperature -65 to 150 °C STG T Max. operating junction temperature 150 °C J Table 3. Thermal data Symbol Parameter Value Unit R Thermal resistance junction-case max 3.13 °C/W thJC 2/7 Doc ID 14059 Rev 2

STP03D200 Electrical characteristics 2 Electrical characteristics T = 25 °C unless otherwise specified. CASE Table 4. Electrical characteristics Symbol Parameter Test conditions Min. Typ. Max. Unit Collector cut-off current I V = 2000 V 100 µA CBO (I = 0) CB E Collector cut-off current I V = 1200 V 100 µA CEO (I = 0) CE B Collector-emitter V I = 1 mA 1200 V (BR)CEO breakdown voltage (I = 0) C B Emitter-base voltage V I = 10 µA 20 V EBO (I = 0) E C Collector-emitter saturation V (1) I = 50 mA; I = 500 µA 2 V CE(sat) voltage C B Base-emitter saturation V (1) I = 50 mA; I = 500 µA 2 V BE(sat) voltage C B I = 20 mA; V = 10 V 230 h DC current gain C CE FE I = 30 mA; V = 10 V 200 C CE 1. Pulse test: pulse duration ≤ 300 µs, duty cycle ≤ 2 % Doc ID 14059 Rev 2 3/7

Package mechanical data STP03D200 3 Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. 4/7 Doc ID 14059 Rev 2

STP03D200 Package mechanical data TO-220 type A mechanical data mm Dim Min Typ Max A 4.40 4.60 b 0.61 0.88 b1 1.14 1.70 c 0.48 0.70 D 15.25 15.75 D1 1.27 E 10 10.40 e 2.40 2.70 e1 4.95 5.15 F 1.23 1.32 H1 6.20 6.60 J1 2.40 2.72 L 13 14 L1 3.50 3.93 L20 16.40 L30 28.90 ∅P 3.75 3.85 Q 2.65 2.95 0015988_Rev_S Doc ID 14059 Rev 2 5/7

Revision history STP03D200 4 Revision history T able 5. Document revision history Date Revision Changes 22-Oct-2007 1 Initial release. Document status promoted from preliminary data to datasheet, 19-Feb-2010 2 modified h minimum values Table4 on page3. FE 6/7 Doc ID 14059 Rev 2

STP03D200 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2010 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com Doc ID 14059 Rev 2 7/7

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: S TMicroelectronics: STP03D200