图片仅供参考

详细数据请看参考数据手册

Datasheet下载
  • 型号: OPB840W55Z
  • 制造商: OPTEK
  • 库位|库存: xxxx|xxxx
  • 要求:
数量阶梯 香港交货 国内含税
+xxxx $xxxx ¥xxxx

查看当月历史价格

查看今年历史价格

OPB840W55Z产品简介:

ICGOO电子元器件商城为您提供OPB840W55Z由OPTEK设计生产,在icgoo商城现货销售,并且可以通过原厂、代理商等渠道进行代购。 OPB840W55Z价格参考。OPTEKOPB840W55Z封装/规格:光学传感器 - 光断续器 - 槽型 - 晶体管输出, Optical Sensor Transmissive 0.125" (3.18mm) Phototransistor Module, Pre-Wired。您可以下载OPB840W55Z参考资料、Datasheet数据手册功能说明书,资料中有OPB840W55Z 详细功能的应用电路图电压和使用方法及教程。

产品参数 图文手册 常见问题
参数 数值
产品目录

传感器,变送器

描述

SENS OPTO SLOT 3.18MM TRANS C-MT光学开关(透射型,光电晶体管输出) Slotted Opt Switch

产品分类

光学传感器 - 光断续器 - 槽型 - 晶体管输出

品牌

TT Electronics/Optek Technology

产品手册

点击此处下载产品Datasheet

产品图片

rohs

符合RoHS无铅 / 符合限制有害物质指令(RoHS)规范要求

产品系列

光学开关(透射型,光电晶体管输出),Optek / TT electronics OPB840W55Z-

数据手册

点击此处下载产品Datasheet

产品型号

OPB840W55Z

产品培训模块

http://www.digikey.cn/PTM/IndividualPTM.page?site=cn&lang=zhs&ptm=6246

产品种类

光学开关(透射型,光电晶体管输出)

光圈宽度

1.27 mm

其它名称

365-1733
OPB840W55Z-ND

功率耗散

100 mW

包装

散装

响应时间

-

商标

Optek / TT electronics

安装类型

底座安装

封装

Bulk

封装/外壳

模块,预接线

工作温度

-40°C ~ 80°C

工厂包装数量

25

感应方式

Transmissive, Slotted

感应方法

可传导的

感应距离

0.125" (3.18mm)

最大工作温度

+ 80 C

最大集电极电流

30 mA

最小工作温度

- 40 C

标准包装

25

槽宽

3.18 mm

正向电流

50 mA

波长

880 nm

电压-集射极击穿(最大值)

30V

电流-DC正向(If)

50mA

电流-集电极(Ic)(最大值)

30mA

类型

无放大

输出设备

Phototransistor

输出配置

光电晶体管

集电极—发射极最大电压VCEO

30 V

推荐商品

型号:GP1S58VJ000F

品牌:Sharp Microelectronics

产品名称:传感器,变送器

获取报价

型号:OPB890P11Z

品牌:TT Electronics/Optek Technology

产品名称:传感器,变送器

获取报价

型号:LTH-301-05

品牌:Lite-On Inc.

产品名称:传感器,变送器

获取报价

型号:OPB365T11

品牌:TT Electronics/Optek Technology

产品名称:传感器,变送器

获取报价

型号:HOA2862-002

品牌:Honeywell Sensing and Productivity Solutions

产品名称:传感器,变送器

获取报价

型号:OPB880L51Z

品牌:TT Electronics/Optek Technology

产品名称:传感器,变送器

获取报价

型号:PM-L24-C3

品牌:Panasonic Industrial Automation Sales

产品名称:传感器,变送器

获取报价

型号:EE-SX1109

品牌:Omron Electronics Inc-EMC Div

产品名称:传感器,变送器

获取报价

样品试用

万种样品免费试用

去申请
OPB840W55Z 相关产品

OPB800W51Z

品牌:TT Electronics/Optek Technology

价格:

HOA0875-N51

品牌:Honeywell Sensing and Productivity Solutions

价格:

EE-SX1031

品牌:Omron Electronics Inc-EMC Div

价格:¥33.45-¥37.40

OPB870P55

品牌:TT Electronics/Optek Technology

价格:

EE-SX1081

品牌:Omron Electronics Inc-EMC Div

价格:

OPB610

品牌:TT Electronics/Optek Technology

价格:

OPB831W55Z

品牌:TT Electronics/Optek Technology

价格:¥28.64-¥35.69

OPB856Z

品牌:TT Electronics/Optek Technology

价格:¥152.12-¥182.67

PDF Datasheet 数据手册内容提取

Slotted Optical Switch OPB830 and OPB840 (L and W) Features:  0.125” (3.18 mm) wide slot L Package  Choice of electrical output parameters  Choice of aperture  Choice of opaque or IR transmissive shell material  Side mount configuration  Choice of lead spacing (L Series) W Package  24” [610 mm] 26 AWG wire leads (W Series) Description: OPB830 and OPB840 series provide the design engineer with the flexibility of a custom device from a standard product line. The L Series offers a choice of PCBoard mount lead spacing, while the W Series offers 24” (610mm) 26AWG wire leads. Building from a standard housing that utilizes a .375” (9.5 mm) wide slot, a user can specify the electrical output parameters, choice of aperture, discrete shell material, side mount configuration, and a choice of lead spacing (for the L Series) or 24” [610 mm] UL approved 26 AWG wire leads (W Series). Housings are made from an opaque grade of injection-molded plastic that minimizes the assembly’s sensitivity to visible and near-infrared ambient radiation. Discrete shells (exposed on the parallel faces inside the device throat) are made of either IR transmissive plastic (for applications where aperture contamination may occur) or of opaque plastic with aperture openings (for maximum protection against ambient light). Switching of the phototransistor occurs whenever an opaque object passes through the slot and interrupts the beam. Applications:  Non-contact interruptive object sensing  Assembly line automation  Machine automation  Equipment security  Machine safety General Note TT Electronics | Optek Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.ttelectronics.com | sensors@ttelectronics.com considered accurate at time of going to print. © TT electronics plc Issue A 11/2016 Page 1

Slotted Optical Switch OPB830 and OPB840 (L and W) Electrical Specifications Absolute Maximum Ratings (T =25°C unless otherwise noted) A Storage and Operating Temperature L Series(1) -40° C to +85°C W Series(1) -40° C to +80°C Lead Soldering Temperature [1/16 inch (1.6mm) from the case for 5 sec. with soldering iron](2) 260°C Input Diode Forward DC Current 50 mA Peak Forward Current (1 µs pulse width, 300 pps) 1 A Reverse DC Voltage 2 V Power Dissipation(1) 100 mW Output Phototransistor Collector-Emitter Voltage 30 V Emitter-Collector Voltage 5 V Collector DC Current 30 mA Power Dissipation(1) 100 mW Electrical Characteristics (T = 25°C unless otherwise noted) A SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS Input Diode LED (See OP240 for additional information—for reference only) V Forward Voltage - - 1.7 V I = 20 mA F F I Reverse Current - - 100 µA V = 2 V R R Output Transistor (See OP550 for additional information—for reference only) V Collector-Emitter Breakdown Voltage 30 - - V I = 1 mA (BR)CEO C V Emitter-Collector Breakdown Voltage 5 - - V I = 100 µA (BR)ECO E I Collector-Emitter Dark Current - - 100 nA V = 10 V CEO CE Notes: (1) Derate linearly 1.67 mW/° C above 25° C for L Series. (2) RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering. (3) Methanol or isopropanol are recommended as cleaning agents. Plastic housing is soluble in chlorinated hydrocarbons and ketones. (4) The W Series includes wire terminations of 24” (610 mm) 7-strand, 26 AWG UL insulated wire on each terminal. Each device incorporates a wire strain relief at the housing surface. The insulation functions and colors are: anode (red), cathode (black), phototransistor collector (white) and phototransistor emitter (green). (5) All parameters tested using pulse technique. General Note TT Electronics | Optek Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.ttelectronics.com | sensors@ttelectronics.com considered accurate at time of going to print. © TT electronics plc Issue A 11/2016 Page 2

Slotted Optical Switch OPB830 and OPB840 (L and W) Electrical Characteristics (T = 25°C unless otherwise noted) A SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS Combined Collector-Emitter Saturation Voltage Parameter A (OPB830L,OPB840L) (OPB835L, OPB845L) - - 0.4 V I = 400 µA, I = 20 mA (OPB830W,OPB840W) C F (OPB835W, OPB845W) Parameter B (OPB831L,OPB841L) V (OPB836L,OPB846L) CE(SAT) - - 0.4 V I = 800 µA, I = 10 mA (OPB831W,OPB841W) C F (OPB836W,OPB846W) Parameter C (OPB832L,OPB842L) (OPB837L,OPB847L) - - 0.6 V I = 1800 µA, I = 20 mA (OPB832W,OPB842W) C F (OPB837W,OPB847W) On-State Collector Current Parameter A (OPB830L,OPB840L) (OPB835L, OPB845L) - - 0.625 mA V = 10 V, I = 20 mA (OPB830W,OPB840W) CE F (OPB835W, OPB845W) Parameter B (OPB831L,OPB841L) I (OPB836L,OPB846L) C(ON) 1.250 - - mA V = 5 V, I = 10 mA (OPB831W,OPB841W) CE F (OPB836W,OPB846W) Parameter C (OPB832L,OPB842L) (OPB837L,OPB847L) mA 2.250 - - V = .6 V, I = 20 mA (OPB832W,OPB842W) CE F (OPB837W,OPB847W) General Note TT Electronics | Optek Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.ttelectronics.com | sensors@ttelectronics.com considered accurate at time of going to print. © TT electronics plc Issue A 11/2016 Page 3

Slotted Optical Switch OPB830 and OPB840 (L and W) OPOBP8B_3 _70 LT1111 -- FFllaagg NNeexxt tt oto E Emmittiettrer OPOBP8B_3 _7 0LT1111 -- FFllaagg NNeexxtt t too S Seennsosror 1.20 1.20 Top to Bottom Top to Bottom 1.00 1.00 A) A) m0.80 m0.80 se ( Left to Right Right to Left se ( Left to Right Right to Left n n o o p p s s Re0.60 Re0.60 N) N) O O C( C( al I al I c c pi0.40 pi0.40 y y T T 0.20 0.20 0.00 0.00 0.00 0.05 0.10 0.15 0.20 0.25 0.00 0.05 0.10 0.15 0.20 0.25 Displacement Distance (inches) Displacement Distance (inches) OPOBPB83_7 _0 TL1111 - -F Flalga gin i nM iMddidled olef Solfo Stlot 1.20 Top to Bottom 1.00 Top to Bottom 0 A) m 0.80 se ( Left to Right Right to Left n o p s Re 0.60 N) Emitter O C( al I Left to Right Right to Left c pi 0.40 y T Sensor 0.20 0 Width 0.00 0.00 0.05 0.10 0.15 0.20 0.25 Diisplacement Distance (inches) General Note TT Electronics | Optek Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.ttelectronics.com | sensors@ttelectronics.com considered accurate at time of going to print. © TT electronics plc Issue A 11/2016 Page 4

Slotted Optical Switch OPB830 and OPB840 (L and W) OPOBP8B_3 7_0 LN5511 -- FFllaagg i nN eMxidt dtole E omf Sitltoetr OPOBP8B_3 _7 0LN5511 - - FFllaagg NNeexxtt ttoo SSeennssoorr 1.20 1.20 Top to Bottom Top to Bottom 1.00 1.00 A) A) m 0.80 m 0.80 se ( se ( Left to Right Right to Left n Left to Right Right to Left n o o p p s s Re 0.60 Re 0.60 N) N) O O C( C( al I al I c c pi 0.40 pi 0.40 y y T T 0.20 0.20 0.00 0.00 0.00 0.05 0.10 0.15 0.20 0.25 0.00 0.05 0.10 0.15 0.20 0.25 Displacement Distance (inches) Displacement Distance (inches) OOPPBB83_7 _0 NL5511 - - F Flalagg i nin M Mididdlde loef oSfl oStlot 1.20 Top to Bottom 1.00 Top to Bottom 0 A) m 0.80 e ( s n Left to Right Right to Left o p s e 0.60 R Emitter N) O C( Left to Right Right to Left al I c pi 0.40 y T Sensor 0 Width 0.20 0.00 0.00 0.05 0.10 0.15 0.20 0.25 Displacement Distance (inches) General Note TT Electronics | Optek Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.ttelectronics.com | sensors@ttelectronics.com considered accurate at time of going to print. © TT electronics plc Issue A 11/2016 Page 5

Slotted Optical Switch OPB830 and OPB840 (L and W) OPBO8P_B 3_8 L0T5555 - - FFllaagg NNeexxtt t oto E Emmittiettrer OPBO8P_B 3_8 L0T5555 - -F Fllaagg NNeexxtt ttoo S Seennsosror 1.20 1.20 Top to Bottom Top to Bottom 1.00 1.00 A) A) m 0.80 m 0.80 e ( e ( s s pon Left to Right Right to Left pon Left to Right Right to Left s s Re 0.60 Re 0.60 al I C(ON) al I C(ON) c c pi 0.40 pi 0.40 y y T T 0.20 0.20 0.00 0.00 0.00 0.05 0.10 0.15 0.20 0.25 0.00 0.05 0.10 0.15 0.20 0.25 Displacement Distance (inches) Displacement Distance (inches) OPOBP8B_3 8_0 TL5555 -- F Flalagg in i nM Mididdled loef oSflo Stlot 1.20 Top to Bottom 1.00 Top to Bottom 0 A) m e ( 0.80 s n po Left to Right Right to Left s Re 0.60 N) Emitter O al IC( Left to Right Right to Left pic 0.40 y T Sensor 0 Width 0.20 0.00 0.00 0.05 0.10 0.15 0.20 0.25 Displacement Distance (inches) General Note TT Electronics | Optek Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.ttelectronics.com | sensors@ttelectronics.com considered accurate at time of going to print. © TT electronics plc Issue A 11/2016 Page 6

Slotted Optical Switch OPB830 and OPB840 (L and W) Packaging OPB830/840L Series 1 3 2 4 Pin # / Color Description 1 / Black Cathode 2 / Red Anode OPB830/840W Series 3 / White Collector 4 / Green Emitter DIMENSIONS ARE IN: [ MILLIMETERS] INCHES General Note TT Electronics | Optek Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.ttelectronics.com | sensors@ttelectronics.com considered accurate at time of going to print. © TT electronics plc Issue A 11/2016 Page 7

Slotted Optical Switch OPB830 and OPB840 (L and W) Part Number Guide — OPB8XX OPB 8 X X L X X Optek Assembly Sensor Aperture: 1 — 0.010” (0.25 mm) 5 — 0.050” (1.27 mm) Phototransistor Output Family Emitter Aperture: 1 — 0.010” (0.25 mm) 5 — 0.050” (1.27 mm) Discrete Shell Material: Mounting configurations: 3 — Side mount IR transmissive L — Solder lead termination Plastic discrete shell 4 — Side mount opaque Electrical Specification Variations: Plastic discrete shell 0 = Electrical Parameter A - (0.320” lead spacing) 1 = Electrical Parameter B - (0.320” lead spacing) 2 = Electrical Parameter C - (0.320” lead spacing) 5 = Electrical Parameter A - (0.220” lead spacing) 6 = Electrical Parameter B - (0.220” lead spacing) 7 = Electrical Parameter C - (0.220” lead spacing) Notes:  Assemblies with dual 0.010” apertures are currently available with electrical parameter “A” only. Part Number Guide — OPB8XX OPB 8 X X W X X Z Optek Assembly Sensor Aperture: 1 — 0.010” (0.25 mm) 5 — 0.050” (1.27 mm) Phototransistor Output Family Emitter Aperture: 1 — 0.010” (0.25 mm) 5 — 0.050” (1.27 mm) Discrete Shell Material: Mounting configurations: 3 — Side mount IR transmissive W — Wire termination Plastic discrete shell • Parts ending with “Z” meet 4 — Side mount opaque Electrical Specification Variations: RoHS requirements Plastic discrete shell 0 = Electrical Parameter A • Wires = 26 AWG—24” Long 1 = Electrical Parameter B 2 = Electrical Parameter C Notes:  Assemblies with dual 0.010” apertures are currently available with electrical parameter “A” only. General Note TT Electronics | Optek Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.ttelectronics.com | sensors@ttelectronics.com considered accurate at time of going to print. © TT electronics plc Issue A 11/2016 Page 8

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: T T Electronics: OPB830W11 OPB840L11 OPB830W11Z OPB830W51Z OPB830W55Z OPB831W51Z OPB831W55Z OPB832W51Z OPB832W55Z OPB840W11Z OPB840W51Z OPB840W55Z OPB841W51Z OPB841W55Z OPB842W51Z OPB842W55Z OPB830L11 OPB830L55 OPB831L51 OPB831L55 OPB832L51 OPB832L55 OPB835L11 OPB835L51 OPB835L55 OPB836L51 OPB836L55 OPB837L51 OPB837L55 OPB840L51 OPB840L55 OPB841L51 OPB841L55 OPB842L51 OPB842L55 OPB844A OPB844B OPB845A OPB845B OPB845L11 OPB845L51 OPB845L55 OPB846L51 OPB846L55 OPB847L51 OPB847L55 OPB830L51