BGE788C 789 5 123 750 MHz, 34 dB gain push-pull amplifier Rev. 2 — 16 September 2011 Product data sheet 1. Product profile 1.1 General description Hybrid high dynamic range amplifier module operating at a supply voltage of 24V (DC) in a SOT115J package. The module consists of two cascaded stages both in cascode configuration. CAUTION This device is sensitive to ElectroStatic Discharge (ESD). Therefore care should be taken during transport and handling. 1.2 Features and benefits  Excellent linearity  Extremely low noise  High gain  Excellent return loss properties 1.3 Applications  Single module line extender in CATV systems operating in the 40MHz to750MHz frequency range. 1.4 Quick reference data Table 1. Quick reference data Symbol Parameter Conditions Min Typ Max Unit G power gain f=50MHz 33.2 - 35.2 dB p f=750MHz 33.5 - - dB I total current consumption V =24V [1] 285 - 325 mA tot B [1] The module normally operates at V = 24 V, but is able to withstand supply transients up to 30 V. B

BGE788C NXP Semiconductors 750 MHz, 34 dB gain push-pull amplifier 2. Pinning information Table 2. Pinning Pin Description Simplified outline Symbol 1 input 2 common 5 3 common 1 9 1 3 5 7 9 5 +V B 7 common 2 3 7 8 8 common sym095 9 output 3. Ordering information Table 3. Ordering information Type number Package Name Description Version BGE788C - rectangular single-ended package; aluminium flange; SOT115J 2vertical mounting holes; 2 6-32 UNC and 2 extra horizontal mounting holes; 7 gold-plated in-line leads 4. Limiting values Table 4. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter Conditions Min Max Unit V supply voltage - 25 V B V RF input voltage - 55 dBmV i T storage temperature 40 +100 C stg T mounting base temperature 20 +100 C mb BGE788C All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved. Product data sheet Rev. 2 — 16 September 2011 2 of 8

BGE788C NXP Semiconductors 750 MHz, 34 dB gain push-pull amplifier 5. Characteristics Table 5. Characterist ics Bandwidth 40MHzto750MHz; V =24V; T =30C; Z =Z =75. B mb S L Symbol Parameter Conditions Min Typ Max Unit G power gain f=50MHz 33.2 - 35.2 dB p f=750MHz 33.5 - - dB SL slope cable equivalent f=40MHz to750MHz 0.3 - 2.3 dB FL flatness of frequency response f=40MHz to750MHz - - 0.6 dB s 2 input return losses f=40MHz to320MHz 16 - - dB 11 f=320MHz to640MHz 15 - - dB f=640MHz to750MHz 14 - - dB s 2 output return losses f=40MHz to320MHz 16 - - dB 22 f=320MHz to640MHz 15 - - dB f=640MHz to750MHz 14 - - dB  phase response f=50MHz 135 - 225 deg s21 CTB composite triple beat 110 channels flat; - - 49 dB V =44dBmV; o measuredat745.25MHz CSO composite second order 110 channels flat; - - 52 dB distortion V =44dBmV; o measuredat746.5MHz NF noise figure f=50MHz - - 8 dB I total current consumption [1] 285 - 325 mA tot [1] The module normally operates at V = 24 V, but is able to withstand supply transients up to 30 V. B BGE788C All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved. Product data sheet Rev. 2 — 16 September 2011 3 of 8

BGE788C NXP Semiconductors 750 MHz, 34 dB gain push-pull amplifier 6. Package outline Rectangular single-ended package; aluminium flange; 2 vertical mounting holes; 2 x 6-32 UNC and 2 extra horizontal mounting holes; 7 gold-plated in-line leads SOT115J D E Z p A2 1 2 3 5 7 8 9 A L F S c W e b w M d e1 U2 Q q2 y M B B q1 x M B y M B p U1 q 0 5 10 mm scale DIMENSIONS (mm are the original dimensions) UNITmAax. mAa2x. b c mDax. d mEax. e e1 F mLin. p mQax. q q1 q2 S U1 U2 W w x y mZax. 0.51 2.04 4.15 44.75 8.2 6-32 mm 20.8 9.5 0.25 27.2 13.75 2.54 5.08 12.7 8.8 2.4 38.1 25.4 10.2 4.2 0.25 0.7 0.1 3.8 0.38 2.54 3.85 44.25 7.8 UNC OUTLINE REFERENCES EUROPEAN ISSUE DATE VERSION IEC JEDEC JEITA PROJECTION 04-02-04 SOT115J 10-06-18 Fig 1. Package outline SOT115J BGE788C All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved. Product data sheet Rev. 2 — 16 September 2011 4 of 8

BGE788C NXP Semiconductors 750 MHz, 34 dB gain push-pull amplifier 7. Revision history Table 6. Revision history Document ID Release date Data sheet status Change notice Supersedes BGE788C v.2 20110916 Product data sheet - BGE788C v.1 Modifications: • The format of this data sheet has been redesigned to comply with the new identity guidelines of NXP Semiconductors. • Legal texts have been adapted to the new company name where appropriate. • Package outline drawings have been updated to the latest version. BGE788C v.1 20050401 Product data sheet - - (9397 750 14607) BGE788C All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved. Product data sheet Rev. 2 — 16 September 2011 5 of 8

BGE788C NXP Semiconductors 750 MHz, 34 dB gain push-pull amplifier 8. Legal information 8.1 Data sheet status Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. [1] Please consult the most recently issued document before initiating or completing a design. [2] The term ‘short data sheet’ is explained in section “Definitions”. [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URLhttp://www.nxp.com. 8.2 Definitions malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors accepts no liability for inclusion and/or use of Draft — The document is a draft version only. The content is still under NXP Semiconductors products in such equipment or applications and internal review and subject to formal approval, which may result in therefore such inclusion and/or use is at the customer’s own risk. modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of Applications — Applications that are described herein for any of these information included herein and shall have no liability for the consequences of products are for illustrative purposes only. NXP Semiconductors makes no use of such information. representation or warranty that such applications will be suitable for the specified use without further testing or modification. Short data sheet — A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended Customers are responsible for the design and operation of their applications for quick reference only and should not be relied upon to contain detailed and and products using NXP Semiconductors products, and NXP Semiconductors full information. For detailed and full information see the relevant full data accepts no liability for any assistance with applications or customer product sheet, which is available on request via the local NXP Semiconductors sales design. It is customer’s sole responsibility to determine whether the NXP office. In case of any inconsistency or conflict with the short data sheet, the Semiconductors product is suitable and fit for the customer’s applications and full data sheet shall prevail. products planned, as well as for the planned application and use of customer’s third party customer(s). Customers should provide appropriate Product specification — The information and data provided in a Product design and operating safeguards to minimize the risks associated with their data sheet shall define the specification of the product as agreed between applications and products. NXP Semiconductors and its customer, unless NXP Semiconductors and NXP Semiconductors does not accept any liability related to any default, customer have explicitly agreed otherwise in writing. In no event however, damage, costs or problem which is based on any weakness or default in the shall an agreement be valid in which the NXP Semiconductors product is customer’s applications or products, or the application or use by customer’s deemed to offer functions and qualities beyond those described in the third party customer(s). Customer is responsible for doing all necessary Product data sheet. testing for the customer’s applications and products using NXP Semiconductors products in order to avoid a default of the applications and 8.3 Disclaimers the products or of the application or use by customer’s third party customer(s). NXP does not accept any liability in this respect. Limited warranty and liability — Information in this document is believed to Limiting values — Stress above one or more limiting values (as defined in be accurate and reliable. However, NXP Semiconductors does not give any the Absolute Maximum Ratings System of IEC60134) will cause permanent representations or warranties, expressed or implied, as to the accuracy or damage to the device. Limiting values are stress ratings only and (proper) completeness of such information and shall have no liability for the operation of the device at these or any other conditions above those given in consequences of use of such information. the Recommended operating conditions section (if present) or the Characteristics sections of this document is not warranted. Constant or In no event shall NXP Semiconductors be liable for any indirect, incidental, repeated exposure to limiting values will permanently and irreversibly affect punitive, special or consequential damages (including - without limitation - lost the quality and reliability of the device. profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such Terms and conditions of commercial sale — NXP Semiconductors damages are based on tort (including negligence), warranty, breach of products are sold subject to the general terms and conditions of commercial contract or any other legal theory. sale, as published at http://www.nxp.com/profile/terms, unless otherwise Notwithstanding any damages that customer might incur for any reason agreed in a valid written individual agreement. In case an individual whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards agreement is concluded only the terms and conditions of the respective customer for the products described herein shall be limited in accordance agreement shall apply. NXP Semiconductors hereby expressly objects to with the Terms and conditions of commercial sale of NXP Semiconductors. applying the customer’s general terms and conditions with regard to the purchase of NXP Semiconductors products by customer. Right to make changes — NXP Semiconductors reserves the right to make changes to information published in this document, including without No offer to sell or license — Nothing in this document may be interpreted or limitation specifications and product descriptions, at any time and without construed as an offer to sell products that is open for acceptance or the grant, notice. This document supersedes and replaces all information supplied prior conveyance or implication of any license under any copyrights, patents or to the publication hereof. other industrial or intellectual property rights. Suitability for use — NXP Semiconductors products are not designed, Export control — This document as well as the item(s) described herein authorized or warranted to be suitable for use in life support, life-critical or may be subject to export control regulations. Export might require a prior safety-critical systems or equipment, nor in applications where failure or authorization from national authorities. BGE788C All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved. Product data sheet Rev. 2 — 16 September 2011 6 of 8

BGE788C NXP Semiconductors 750 MHz, 34 dB gain push-pull amplifier Quick reference data — The Quick reference data is an extract of the product for such automotive applications, use and specifications, and (b) product data given in the Limiting values and Characteristics sections of this whenever customer uses the product for automotive applications beyond document, and as such is not complete, exhaustive or legally binding. NXP Semiconductors’ specifications such use shall be solely at customer’s own risk, and (c) customer fully indemnifies NXP Semiconductors for any Non-automotive qualified products — Unless this data sheet expressly liability, damages or failed product claims resulting from customer design and states that this specific NXP Semiconductors product is automotive qualified, use of the product for automotive applications beyond NXP Semiconductors’ the product is not suitable for automotive use. It is neither qualified nor tested standard warranty and NXP Semiconductors’ product specifications. in accordance with automotive testing or application requirements. NXP Semiconductors accepts no liability for inclusion and/or use of non-automotive qualified products in automotive equipment or applications. 8.4 Trademarks In the event that customer uses the product for design-in and use in automotive applications to automotive specifications and standards, customer Notice: All referenced brands, product names, service names and trademarks (a) shall use the product without NXP Semiconductors’ warranty of the are the property of their respective owners. 9. Contact information For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com BGE788C All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved. Product data sheet Rev. 2 — 16 September 2011 7 of 8

BGE788C NXP Semiconductors 750 MHz, 34 dB gain push-pull amplifier 10. Contents 1 Product profile. . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1 General description . . . . . . . . . . . . . . . . . . . . . 1 1.2 Features and benefits. . . . . . . . . . . . . . . . . . . . 1 1.3 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.4 Quick reference data . . . . . . . . . . . . . . . . . . . . 1 2 Pinning information. . . . . . . . . . . . . . . . . . . . . . 2 3 Ordering information. . . . . . . . . . . . . . . . . . . . . 2 4 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2 5 Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . 3 6 Package outline. . . . . . . . . . . . . . . . . . . . . . . . . 4 7 Revision history. . . . . . . . . . . . . . . . . . . . . . . . . 5 8 Legal information. . . . . . . . . . . . . . . . . . . . . . . . 6 8.1 Data sheet status . . . . . . . . . . . . . . . . . . . . . . . 6 8.2 Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 8.3 Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 8.4 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 9 Contact information. . . . . . . . . . . . . . . . . . . . . . 7 10 Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section ‘Legal information’. © NXP B.V. 2011. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com Date of release: 16 September 2011 Document identifier: BGE788C