MSP www.vishay.com Vishay Dale Thick Film Resistor Networks, Single-In-Line, Molded SIP FEATURES • Isolated, bussed, and dual terminator schematics available • 0.195" (4.95 mm) “A” or 0.350" (8.89 mm) “C” Available maximum seated height • Thick film resisitive elements • Low temperature coefficient (-55 °C to +125 °C) ± 100 ppm/°C • Rugged, molded case construction • Reduces total assembly costs Available • Compatible with automatic insertion equipment and reduces PC board space • Wide resistance range (10  to 2.2 M) • Available in tube pack • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 Note * This datasheet provides information about parts that are RoHS-compliant and/or parts that are non-RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information/tables in this datasheet for details. STANDARD ELECTRICAL SPECIFICATIONS POWER RATING TEMPERATURE TCR MAXIMUM GLOBAL ELEMENT RESISTANCE TOLERANCE (2) COEFFICIENT TRACKING (1) WORKING MODEL/ PROFILE P RANGE ± % (-55 °C to +125 °C) (-55 °C to +125 °C) VOLTAGE (3) SCHEMATIC 70 °C  W ± ppm/°C ± ppm/°C V DC MSPxxx01 A 0.20 10 to 2.2M 1, 2, 5 100 50 100 MSPxxx01 C 0.25 10 to 2.2M 1, 2, 5 100 50 100 MSPxxx03 A 0.30 10 to 2.2M 1, 2, 5 100 50 100 MSPxxx03 C 0.40 10 to 2.2M 1, 2, 5 100 50 100 MSPxxx05 A 0.20 10 to 2.2M 1, 2, 5 100 150 100 MSPxxx05 C 0.25 10 to 2.2M 1, 2, 5 100 150 100 Notes (1) Tighter tracking available (2) ± 2 % standard, ± 1 % and ± 5 % available (3) Continuous working voltage shall be P x R or maximum working voltage, whichever is less GLOBAL PART NUMBER INFORMATION New Global Part Numbering: MSP06A031K00GDA (preferred part numbering format) M S P 0 6 A 0 3 1 K 0 0 G D A GLOBAL PIN PACKAGE RESISTANCE TOLERANCE SCHEMATIC PACKAGING SPECIAL MODEL COUNT HEIGHT VALUE CODE MSP 06 = 6 pin A = “A” profile 01 = Bussed R =  F = ± 1 % EJ = Lead (Pb)-free, Blank = Standard 08 = 8 pin C = “C” profile 03 = Isolated K = k G = ± 2 % tube (Dash Number) 09 = 9 pin 00 = Special M = M J = ± 5 % (Up to 3 digits) 10 = 10 pin 10R0 = 10  S = Special DA = Tin/lead, tube From 1 to 999 33K0 = 33 k Z = 0  as applicable 1M00 = 1 M Jumper 0000 = 0  Jumper Historical Part Number Example: MSP06A03102G (will continue to be accepted) MSP 06 A 03 102 G D03 HISTORICAL MODEL PIN COUNT PACKAGE HEIGHT SCHEMATIC RESISTANCE VALUE TOLERANCE CODE PACKAGING New Global Part Numbering: MSP08C05131AGDA (preferred part numbering format) M S P 0 8 C 0 5 1 3 1 A G D A GLOBAL PIN PACKAGE RESISTANCE TOLERANCE SCHEMATIC PACKAGING SPECIAL MODEL COUNT HEIGHT VALUE CODE MSP 06 = 6 pin A = “A” profile 05 = Dual 3 digit impedance F = ± 1 % EJ = Lead (Pb)-free, Blank = Standard 08 = 8 pin C = “C” profile terminator code, followed by G = ± 2 % tube (Dash Number) 09 = 9 pin alpha modifier J = ± 5 % (Up to 3 digits) 10 = 10 pin (see Impedance DA = Tin/lead, tube From 1 to 999 Codes table) as applicable Historical Part Number Example: MSP08C05221331G (will continue to be accepted) MSP 08 C 05 221 331 G D03 HISTORICAL PIN PACKAGE RESISTANCE RESISTANCE TOLERANCE SCHEMATIC PACKAGING MODEL COUNT HEIGHT VALUE 1 VALUE 2 CODE Note • For additional information on packaging, refer to the Through-Hole Network Packaging document (www.vishay.com/doc?31542). Revision: 13-Feb-15 1 Document Number: 31510 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

MSP www.vishay.com Vishay Dale DIMENSIONS in inches (millimeters) A Max. 0.090 (2.29) Max. 0.015 Pin #1 D Max. (0.381) Min. 0.040 ± 0.010 0.135 + 0.015 (1.02 ± 0.254) 0.016 ± 0.003 - 0.010 (0.406 ± 0.076) (3.43 + 0.381 0.100 ± 0.010 - 0.254) 0.012 ± 0.003 (2.54 ± 0.254) B (0.305 ± 0.076) Non-Accumulative C Equal Space GLOBAL MODEL A (Max.) B C D (Max.) MSP06 0.590 (14.99) 0.500 (12.70) 5 MSPxxA = 0.195 (4.95) MSP08 0.790 (20.07) 0.700 (17.78) 7 MSPxxC = 0.350 (8.89) MSP10 0.990 (25.15) 0.900 (22.86) 9 MSP09 0.890 (22.61) 0.800 (20.32) 8 0.195 (4.95) only TECHNICAL SPECIFICATIONS PARAMETER UNIT MSP SERIES Package Power Rating See Derating Curves Maximum at +25 °C and +70 °C Voltage Coefficient of Resistance V < 50 ppm typical eff Dielectric Strength V 200 AC Isolation Resistance (03 Schematic)  > 100 M Operating Temperature Range °C -55 to +125 Storage Temperature Range °C -55 to +150 MECHANICAL SPECIFICATIONS Marking Resistance to Solvents Permanency testing per MIL-STD-202, Method 215 Solderability Per MIL-STD-202, Method 208E, RMA flux Body Molded epoxy Terminals Copper alloy, solder plated MSP06A = 0.4 g MSP06C = 0.7 g MSP08A = 0.5 g MSP08C = 0.9 g Weight MSP09A = 0.55 g MSP10C = 1.1 g MSP10A = 0.6 g IMPEDANCE CODES CODE R1 () R2 () CODE R1 () R2 () 500B 82 130 141A 270 270 750B 120 200 181A 330 390 800C 130 210 191A 330 470 990A 160 260 221B 330 680 101C 180 240 281B 560 560 111C 180 270 381B 560 1.2K 121B 180 390 501C 620 2.7K 121C 220 270 102A 1.5K 3.3K 131A 220 330 202B 3K 6.2K Note • For additional impedance codes, refer to the Dual Terminator Impedance Code Table document (www.vishay.com/doc?31530). Revision: 13-Feb-15 2 Document Number: 31510 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

MSP www.vishay.com Vishay Dale CIRCUIT APPLICATIONS 01 Schematic  5, 7, 8 (1), or 9 resistors with one pin common The MSPxxx01 circuit contains 5, 7, 8 (1), or 9 nominally equal resistors, each connected between a common pin (pin no. 1) and a discrete PC board pin. Commonly used in the following applications: • “Wired OR” Pull-up • MOS/ROM Pull-up/Pull-down  • Power Gate Pull-up • Open Collector Pull-up  • TTL Input Pull-down • TTL Unused Gate Pull-up Note 1 2 3 n-1 n (1) Available in “A” Profile only Standard E-24 resistance values stocked. Consult factory. 03 Schematic   3, 4 or 5 isolated resistors The MSPxxx03 circuit contains 3, 4, or 5 resistors of nominally equal value in a compact package. Each resistor is connected to two discrete PC pins. Standard E-24 resistance values stocked. Consult factory.  1 2 3 4 n-1 n 05 Schematic   Pulse squaring and TTL dual-line terminators The MSPxxx05 circuits contain 4, 6, 7 (2), or 8 series pair of resistors. R2 Each series pair is connected between two common lines. The junction of these resistor pairs is connected to the input terminals. R1 The 05 circuits are designed for TTL dual-line termination and pulse squaring. Note (2) Available in “A” Profile only Many dual terminator resistance values stocked. Consult factory.  1 2 3 n-1 n DERATING “A” Profile “C” Profile s) 1.90 MSP10A Package Watt atts) 3.00 Power Rating ( 11..1550 MMSSPP0086AA PPaacckkaaggee ower Rating (W 22..0500 MMSSPP1008CC PPaacckkaaggee P MSP06C Package 1.50 Single Resistor 03 0.45 Single Resistor 0.30 01 and 05 0.60 03 0.38 01 and 05 - 50 + 25 + 70 + 125 + 150 Derating Ambient Temperature °C - 50 + 25 + 70 + 125 + 150 Derating Ambient Temperature C Revision: 13-Feb-15 3 Document Number: 31510 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

MSP www.vishay.com Vishay Dale “A” PROFILE +70 °C PACKAGE RATINGS “C” PROFILE +70 °C PACKAGE RATINGS MSP10A 1.25 W MSP10C 1.60 W MSP09A 1.12 W MSP08C 1.30 W MSP08A 1.00 W MSP06C 1.00 W MSP06A 0.75 W Note • Higher power ratings available. Contact factory. PERFORMANCE MAX. R TEST CONDITIONS (TYPICAL TEST LOTS) 1.5 x rated power, applied 1.5 h “ON” and 0.5 h “OFF” Power Conditioning ± 0.50 % R for 100 h ± 4 h at +25 °C ambient temperature Thermal Shock 5 cycles between -65 °C and +125 °C ± 0.50 % R Short Time Overload 2.5 x rated working voltage 5 s ± 0.25 % R Low Temperature Operation 45 min at full rated working voltage at -65 °C ± 0.25 % R Moisture Resistance 240 h with humidity ranging from 80 % RH to 98 % RH ± 0.50 % R Resistance to Soldering Heat Leads immersed in +260 °C solder to within 1/16" of device body for 10 s ± 0.25 % R Shock Total of 18 shocks at 100 g’s ± 0.25 % R Vibration 12 h at maximum of 20 g’s between 10 Hz and 2000 Hz ± 0.25 % R 1000 h at +70 °C, rated power applied 1.5 h “ON”, 0.5 h “OFF” Load Life ± 1.00 % R for full 1000 h period. Derated according to the curve. Terminal Strength 4.5 pound pull for 30 s ± 0.25 % R Insulation Resistance 10 000 M (minimum) - Dielectric Withstanding Voltage - - Revision: 13-Feb-15 4 Document Number: 31510 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROV E RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose o r the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustainin g applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk . Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this documen t or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2019 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2019 1 Document Number: 91000

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: V ishay: MSP08A012002F MSP08A034701F MSP08A05331/471G MSP10A013301F MSP10A032701F MSP08A0368R0GDA MSP10C013K00GDA MSP08A05181/391G MSP08C0322K0FDA MSP08C03510RFDA MSP08C035K60FDA