DATA SHEET AS214-92, AS214-92LF: PHEMT GaAs IC SPDT Switch 0.1–3 GHz Applications Pin Out ●T/R switch in WLANs,BluetoothTMand medium-power telecommunication applications J3 1 6 V2 CBL Features ●Low insertion loss (0.4 dB @ 2.4 GHz) GND 2 5 CBL J1 ●Isolation 26 dB @ 2.4 GHz J2 3 4 V1 CBL ●Low DC power consumption ●PHEMT process DC blocking capacitors (CBL) must be supplied externally for positive voltage operation. CBL= 100 pF for operation >500 MHz. ●Operates at 1.8 V control voltage ● Available lead (Pb)-free and RoHS-compliant MSL-1 @ 260 °C per JEDEC J-STD-020 Description The AS214-92 is a medium-power IC FET SPDT switch in a low- cost miniature SC-70 6-lead plastic package.The AS214-92 features low insertion loss and positive voltage operation with very low DC power consumption.This general purpose switch can be used in a variety of telecommunications applications. NEW Skyworks offers lead (Pb)-free,RoHS (Restriction of Hazardous Substances)-compliant packaging. Electrical Specifications at 25 °C (0,3 V) Parameter(1) Frequency Min. Typ. Max. Unit Insertion loss(2) 0.5–1.0 GHz 0.3 0.5 dB 1.0–2.0 GHz 0.4 0.6 dB 2.0–3.0 GHz 0.4 0.6 dB Isolation 0.5–1.0 GHz 27 30 dB 1.0–2.0 GHz 24 27 dB 2.0–3.0 GHz 22 25 dB VSWR(3) 0.5–1.0 GHz 1.1:1 1.0–2.0 GHz 1.1:1 2.0–3.0 GHz 1.4:1 1.All measurements made in a 50 Ωsystem,unless otherwise specified. 2.Insertion loss changes by 0.003 dB/°C. 3.Insertion loss state. Skyworks Solutions,Inc. • Phone [781] 376-3000 (cid:129) Fax [781] 376-3100 (cid:129) sales@skyworksinc.com (cid:129) www.skyworksinc.com 200195 Rev.B (cid:129) Skyworks Proprietary Information (cid:129) Products and Product Information are Subject to Change Without Notice. (cid:129) September 5,2006 1

DATA SHEET • AS214-92,AS214-92LF Operating Characteristics at 25 °C (0,3 V) Parameter Condition Frequency Min. Typ. Max. Unit Switching characteristics Rise,fall 10/90% or 90/10% RF 10 ns On,off 50% CTL to 90/10% RF 20 ns Video feedthru TRISE= 1 ns,BW = 500 MHz 25 mV Input power for 1 dB compression VCTL= 0/1.8 V 0.5–3.0 GHz 20 dBm VCTL= 0/3V 0.5–3.0 GHz 27 dBm Intermodulation intercept point (IP3) For two-tone input power 5 dBm VCTL= 0/3 V 0.5–3 GHz 40 dBm Thermal resistance 25 °C/W Control voltages VLOW= 0 to 0.2 V @ 20 µA max. VHIGH= 2.7 V @ 100 µA max.to 5 V @ 200 µA max. Typical Performance Data (0,3 V) 0 -10 -0.25 -15 B) -0.50 -20 d s ( -0.75 B) -25 s d n Lo -1.00 on ( -30 nsertio -1.25 Isolati -35 I -1.50 -40 -1.75 -45 -2.00 -50 0 0.5 1.0 1.5 2.0 2.5 3.0 0 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) Frequency (GHz) Insertion Loss vs. Frequency Isolation vs. Frequency 1.5 1.4 1.3 R W S V 1.2 1.1 1.0 0 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) VSWR vs. Frequency Skyworks Solutions,Inc. (cid:129) Phone [781] 376-3000 (cid:129) Fax [781] 376-3100 (cid:129) sales@skyworksinc.com (cid:129) www.skyworksinc.com 2 September 5,2006 (cid:129) Skyworks Proprietary Information (cid:129) Products and Product Information are Subject to Change Without Notice. (cid:129) 200195 Rev.B

DATA SHEET (cid:129) AS214-92,AS214-92LF Absolute Maximum Ratings Truth Table Characteristic Value V1 V2 J1–J2 J1–J3 RF input power 2 W max.for f > 500 MHz VHIGH 0 Isolation Insertion loss 500 mW for f < 500 MHz 0 VHIGH Insertion loss Isolation VCTL= 0/8 V All other conditions not recommended. Supply voltage 8 V VHIGH= 2.7 to 5 V. Control voltage -0.2 V,+8 V Operating temperature -40 °C to +85 °C SC-70 6-Lead Storage temperature -65 °C to +150 °C 0.079 (2.00 mm) Performance is guaranteed only under the conditions listed in the specifications table and is ± 0.008 (0.20 mm) 0.0256 (0.65 mm) not guaranteed under the full range(s) described by the Absolute Maximum specifications. BSC Exceeding any of the absolute maximum/minimum specifications may result in permanent damage to the device and will void the warranty. 0.087 (2.20 mm) 0.049 (1.25 mm) CAUTION: Although this device is designed to be as robust as ± 0.008 (0.20 mm) ± 0.004 (0.10 mm) possible,ESD (Electrostatic Discharge) can damage this device.This device must be protected at all times from ESD.Static charges may easily produce poten- Pin 1 Indicator 0.009 (0.23 mm) Ref tials of several kilovolts on the human body or 0.035 (0.90 mm) 0.010 (0.25 mm) equipment,which can discharge without detection. ± 0.004 (0.10 mm) ± 0.006 (0.15 mm) Industry-standard ESD precautions must be employed 0.0055 at all times. (0.14 mm) ± 0.0015 (0.04 mm) 0.002 (0.005 mm) Recommended Solder Reflow Profiles ± 0.002 (0.005 mm) ±0 0.0.03076 ( 0(0.9.155 m mmm)) 0.008 (0.20 mm) ± 0.004 (0.10 mm) Refer to the “Recommended Solder Reflow Profile” Application Note. Tape and Reel Information Refer to the “Discrete Devices and IC Switch/Attenuators Tape and Reel Package Orientation” Application Note. Skyworks Solutions,Inc. (cid:129) Phone [781] 376-3000 (cid:129) Fax [781] 376-3100 (cid:129) sales@skyworksinc.com (cid:129) www.skyworksinc.com 200195 Rev.B (cid:129) Skyworks Proprietary Information (cid:129) Products and Product Information are Subject to Change Without Notice. (cid:129) September 5,2006 3

DATA SHEET (cid:129) AS214-92,AS214-92LF Copyright © 2002,2003,2004,2005,Skyworks Solutions,Inc.All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions,Inc.(“Skyworks”) products or services.These materials,including the information contained herein,are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer.Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein.Skyworks may change its documentation,products,services,specifications or product descriptions at any time,without notice.Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts,incompatibilities,or other difficulties arising from any future changes. No license,whether express,implied,by estoppel or otherwise,is granted to any intellectual property rights by this document.Skyworks assumes no liability for any materials,products or information provided hereunder,including the sale,distribution,reproduction or use of Skyworks products,information or materials,except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS,PRODUCTS AND INFORMATION ARE PROVIDED “AS IS”WITHOUT WARRANTY OF ANY KIND,WHETHER EXPRESS,IMPLIED,STATUTORY,OR OTHERWISE,INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE,MERCHANTABILITY,PERFORMANCE,QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED.SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION,TEXT,GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS.SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES,INCLUDING BUT NOT LIMITED TO ANY SPECIAL,INDIRECT,INCIDENTAL,STATUTORY,OR CONSEQUENTIAL DAMAGES,INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION,WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical,lifesaving or life-sustaining applications,or other equipment in which the failure of the Skyworks products could lead to personal injury, death,physical or environmental damage.Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products,which may deviate from published specifications as a result of design defects,errors,or operation of products outside of published parameters or design specifications.Customers should include design and operating safeguards to minimize these and other risks.Skyworks assumes no liability for applications assistance,customer product design,or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks,the Skyworks symbol,and “Breakthrough Simplicity”are trademarks or registered trademarks of Skyworks Solutions,Inc.,in the United States and other countries.Third-party brands and names are for identification purposes only,and are the property of their respective owners.Additional information,including relevant terms and conditions,posted at www.skyworksinc.com,are incorporated by reference. Skyworks Solutions,Inc. (cid:129) Phone [781] 376-3000 (cid:129) Fax [781] 376-3100 (cid:129) sales@skyworksinc.com (cid:129) www.skyworksinc.com 4 September 5,2006 (cid:129) Skyworks Proprietary Information (cid:129) Products and Product Information are Subject to Change Without Notice. (cid:129) 200195 Rev.B