CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Surface Mount PXA NPCAPTM- Series ・Super low ESR, impedance and high heat resistance have been obtained by using PXE conductive polymer as electrolyte ・Rated voltage range : 2.5 to 25Vdc, case size range : φ5×5.7L toφ10×12.2L Lower ESR ・Suitable for DC-DC converters, voltage regulators and decoupling applications used on computer motherboards etc. PXA ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) ・RoHS2 Compliant ・Halogen Free ◆SPECIFICATIONS Items Characteristics Category -55 to +105℃ Temperature Range Rated Voltage Range 2.5 to 25Vdc Capacitance Tolerance ±20% (M) (at 20℃, 120Hz) Leakage Current Shall not exceed values shown in STANDARD RATINGS. *Note (at 20℃ after 2 minutes) Dissipation Factor 0.12 max. (tanδ) (at 20℃, 120Hz) Low Temperature Z(-25℃)/Z(+20℃)≦1.15 Characteristics (Max. Impedance Ratio) Z(-55℃)/Z(+20℃)≦1.25 (at 100kHz) Endurance The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 15,000 hours (F45 : 3,000 hours) at 105℃. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value Bias Humidity The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjecting them to the DC rated voltage at 60℃, 90 to 95% RH for 1,000 hours(F45 : 500 hours). Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value Surge Voltage The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105℃ for 30 seconds through a protective resistor(R=1kΩ) and discharge for 5 minutes 30 seconds. Rated voltage (Vdc) 2.5 4.0 6.3 10 16 20 23 25 Surge voltage (Vdc) 2.9 4.6 7.2 12 18 23 23 29 Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value Soldering Heat The following specifications shall be satisfied when the solder temperature is reduced back to 20°C to measure dip resistance after soldering has been performed under the recommended soldering conditions. Appearance No significant damage Capacitance value Within the specified tolerance range D.F. (tanδ) ≦The initial specified value ESR ≦The initial specified value Leakage current ≦The initial specified value (Voltage treatment) Failure Rate 0.5% per 1,000 hours maximum (Confidence level 60% at 105℃) *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105℃. ◆DIMENSIONS [mm] ◆MARKING ●Terminal Code : A Size code φD L A B C W P EX) 16V39µF W E60 5 5.7 5.3 5.3 5.9 0.5 to 0.8 1.4 A15L F45 6.3 4.4 6.6 6.6 7.2 0.5 to 0.8 1.9 39 D0.5φ± 0.2B± P0.2C± HF6700 68.3 56..77 68..63 68..63 79..20 00..57 ttoo 01..81 13..91 16V HC0 8 12.0 8.3 8.3 9.0 0.7 to 1.1 3.1 J80 10 7.7 10.3 10.3 11.0 0.7 to 1.1 4.5 0.3max. A±0.2 JC0 10 12.2 10.3 10.3 11.0 0.7 to 1.1 4.5 L±0.3 (Note) Note : L+0.1/-0.2 for F45 L±0.5 for HC0 and JC0 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U

CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Surface Mount PXA NPCAPTM- Series ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 A PXA A RA M G Supplement code Size code Capacitance tolerance code Capacitance code (ex. 10µF:100,100µF:101) Taping code Terminal code Voltage code (ex. 6.3V:6R3,10V:100) Series code Category Please refer to "Product code guide (conductive polymer type)" ◆STANDARD RATINGS Leakage Leakage Rated ripple Rated ripple current ESR current ESR WV Cap Size current WV Cap Size current (µA max./ (mΩ max./ 20℃, Part No. (µA max./ (mΩ max./ 20℃, Part No. (Vdc) (µF) code after 100k to 300kHz) (mArms/105℃, (Vdc) (µF) code after 100k to 300kHz) (mArms/105℃, 100kHz) 100kHz) 2 min.) 2 min.) 220 F60 110 25 2,500 APXA2R5ARA221MF60G 33 E60 66.0 40 1,270 APXA100ARA330ME60G 560 H70 280 23 3,100 APXA2R5ARA561MH70G 47 E60 94.0 40 1,270 APXA100ARA470ME60G 2.5 680 HC0 340 12 4,770 APXA2R5ARA681MHC0G 47 F45 235 41 1,560 APXA100ARA470MF45G 1,000 J80 500 19 4,240 APXA2R5ARA102MJ80G 47 F60 94.0 31 2,250 APXA100ARA470MF60G 1,500 JC0 750 10 5,500 APXA2R5ARA152MJC0G 56 F60 112 31 2,250 APXA100ARA560MF60G 100 F60 80.0 26 2,450 APXA4R0ARA101MF60G 120 H70 240 27 2,800 APXA100ARA121MH70G 120 F45 240 38 1,710 APXA4R0ARA121MF45G 10 150 H70 300 27 2,800 APXA100ARA151MH70G 150 E60 120 30 1,490 APXA4R0ARA151ME60G 270 HC0 540 14 4,420 APXA100ARA271MHC0G 150 F60 120 26 2,450 APXA4R0ARA151MF60G 270 J80 540 24 3,770 APXA100ARA271MJ80G 220 H70 176 25 3,020 APXA4R0ARA221MH70G 330 HC0 660 14 4,420 APXA100ARA331MHC0G 4 330 H70 264 25 3,020 APXA4R0ARA331MH70G 330 J80 660 24 3,770 APXA100ARA331MJ80G 470 J80 376 20 4,130 APXA4R0ARA471MJ80G 470 JC0 940 12 5,300 APXA100ARA471MJC0G 560 HC0 448 12 4,770 APXA4R0ARA561MHC0G 560 JC0 1,120 12 5,300 APXA100ARA561MJC0G 680 J80 544 20 4,130 APXA4R0ARA681MJ80G 22 E60 70.4 45 1,210 APXA160ARA220ME60G 820 JC0 656 10 5,500 APXA4R0ARA821MJC0G 22 F45 176 45 1,490 APXA160ARA220MF45G 1,200 JC0 960 10 5,500 APXA4R0ARA122MJC0G 33 F60 105 37 2,050 APXA160ARA330MF60G 47 E60 59.2 35 1,380 APXA6R3ARA470ME60G 39 F60 124 37 2,050 APXA160ARA390MF60G 68 F60 85.6 27 2,400 APXA6R3ARA680MF60G 82 H70 262 30 2,700 APXA160ARA820MH70G 16 82 F45 258 40 1,670 APXA6R3ARA820MF45G 150 J80 480 26 3,430 APXA160ARA151MJ80G 82 F60 103 27 2,400 APXA6R3ARA820MF60G 180 HC0 576 16 4,360 APXA160ARA181MHC0G 100 E60 126 35 1,380 APXA6R3ARA101ME60G 180 J80 576 26 3,430 APXA160ARA181MJ80G 100 F45 315 40 1,670 APXA6R3ARA101MF45G 220 JC0 704 14 5,050 APXA160ARA221MJC0G 100 F60 126 27 2,400 APXA6R3ARA101MF60G 330 JC0 1,050 14 5,050 APXA160ARA331MJC0G 120 F60 151 27 2,400 APXA6R3ARA121MF60G 15 F45 150 57 1,300 APXA200ARA150MF45G 6.3 150 H70 189 25 3,020 APXA6R3ARA151MH70G 22 F60 88.0 50 1,650 APXA200ARA220MF60G 220 H70 277 25 3,020 APXA6R3ARA221MH70G 39 H70 156 45 2,000 APXA200ARA390MH70G 20 330 J80 415 20 4,130 APXA6R3ARA331MJ80G 47 H70 188 45 2,000 APXA200ARA470MH70G 390 HC0 491 12 4,770 APXA6R3ARA391MHC0G 82 J80 328 40 2,500 APXA200ARA820MJ80G 470 HC0 592 12 4,770 APXA6R3ARA471MHC0G 150 JC0 600 20 4,320 APXA200ARA151MJC0G 470 J80 592 20 4,130 APXA6R3ARA471MJ80G 23 15 F45 172 57 1,300 APXA230ARA150MF45G 680 JC0 856 10 5,500 APXA6R3ARA681MJC0G 10 F60 125 65 1,500 APXA250ARA100MF60G 820 JC0 1,030 10 5,500 APXA6R3ARA821MJC0G 25 22 H70 275 50 1,800 APXA250ARA220MH70G 39 J80 487 45 2,100 APXA250ARA390MJ80G ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Frequency（Hz） 120 1k 10k 50k 100k to 500k SMD type 0.05 0.30 0.55 0.70 1.00 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U