TSV91x, TSV91xA Single, dual, and quad rail-to-rail input/output 8 MHz operational amplifiers Datasheet - production data Applications Battery-powered applications Portable devices Signal conditioning Active filtering Medical instrumentation Automotive applications Related products See TSV99x, TSV99xA for higher gain bandwidth (not unity gain stable) Description The TSV91x operational amplifiers (op amps) offer low voltage operation and rail-to-rail input and output, as well as an excellent speed/power consumption ratio, providing an 8 MHz gain- bandwidth product while consuming only 1.1 mA maximum at 5 V. The op amps are unity gain stable and feature an ultra-low input bias current. The devices are ideal for sensor interfaces, battery-supplied and portable applications, as well as active filtering. Table 1: Device summary Reference Single Dual Quad TSV91x TSV911 TSV912 TSV914 Features TSV91xA (1) TSV911A TSV912A TSV914A Rail-to-rail input and output Wide bandwidth Notes: Low power consumption: 820 µA typ (1)Suffix "A" refers to enhanced Vio performance Unity gain stability High output current: 35 mA Operating from 2.5 V to 5.5 V Low input bias current, 1 pA typ Low input offset voltage: 1.5 mV max (A grade) ESD internal protection ≥ 5 kV Latch-up immunity August 2016 DocID12584 Rev 10 1/27 This is information on a product in full production. www.st.com

Contents TSV91x, TSV91xA Contents 1 Package pin connections ................................................................ 3 2 Absolute maximum ratings and operating conditions ................. 4 3 Electrical characteristics ................................................................ 6 4 Electrical characteristic curves .................................................... 12 5 Application information ................................................................ 15 5.1 Driving resistive and capacitive loads ............................................. 15 5.2 PCB layouts .................................................................................... 15 5.3 Macromodel .................................................................................... 15 6 Package information ..................................................................... 16 6.1 SOT23-5 package information ........................................................ 17 6.2 DFN8 2 x 2 package information ..................................................... 18 6.3 MiniSO8 package information ......................................................... 20 6.4 SO8 package information ................................................................ 21 6.5 TSSOP14 package information ....................................................... 22 6.6 SO14 package information .............................................................. 23 7 Ordering information ..................................................................... 24 8 Revision history ............................................................................ 25 2/27 DocID12584 Rev 10

TSV91x, TSV91xA Package pin connections 1 Package pin connections Figure 1: Pin connections for each package (top view) 1. The exposed pad of the DFN8 2x2 package is not internally connected and can be set to ground or left floating. DocID12584 Rev 10 3/27

Absolute maximum ratings and operating TSV91x, TSV91xA conditions 2 Absolute maximum ratings and operating conditions Table 2: Absolute maximum ratings (AMR) Symbol Parameter Value Unit VCC Supply voltage (1) 6 Vid Differential input voltage (2) ±VCC V Vin Input voltage (3) (VCC-) - 0.2 to (VCC+) + 0.2 Iin Input current (4) 10 mA Tstg Storage temperature -65 to 150 °C Tj Maximum junction temperature 150 SOT23-5 250 DFN8 2x2 57 SO8 125 Thermal resistance junction to Rthja ambient (5) (6) MiniSO8 190 SO14 103 TSSOP14 100 °C/W SOT23-5 81 SO8 40 Thermal resistance junction to Rthjc case (5) (6) MiniSO8 39 SO14 31 TSSOP14 32 HBM: human body model (7) 5 kV MM: machine model (8) 400 SOT23-5, SO8, ESD 1500 MiniSO8 V CDM: charged device model (9) TSSOP14 750 SO14 500 Latch-up immunity 200 mA Notes: (1)All voltage values, except the differential voltage, are with respect to network ground terminal. (2)Differential voltages are the non-inverting input terminal with respect to the inverting input terminal (3)VCC - VIN must not exceed 6 V (4)Input current must be limited by a resistor in series with the inputs (5)Short-circuits can cause excessive heating and destructive dissipation. (6)Rth are typical values (7)Human body model: 100 pF discharged through a 1.5 kΩ resistor between two pins of the device, done for all couples of pin combinations with other pins floating. (8)Machine model: 200 pF charged to the specified voltage, then discharged directly between two pins of the device with no external series resistor (internal resistor < 5 Ω), done for all couples of pin combinations with other pins floating 4/27 DocID12584 Rev 10

TSV91x, TSV91xA Absolute maximum ratings and operating conditions (9)Charged device model: all pins plus packages are charged together to the specified voltage and then discharged directly to the ground. Table 3: Operating conditions Symbol Parameter Value Unit -40 °C < Top < 125 °C 2.5 to 5.5 VCC Supply voltage 0 °C < Top < 125 °C 2.3 to 5.5 V Vicm Common mode input voltage range (VCC-) - 0.1 to (VCC+) + 0.1 Top Operating free air temperature range -40 to 125 °C DocID12584 Rev 10 5/27

Electrical characteristics TSV91x, TSV91xA 3 Electrical characteristics In the electrical characteristic tables below, all parameter limits at temperatures other than 25 °C are guaranteed by correlation. Table 4: Electrical characteristics at VCC+ = 2.5 V, VCC- = 0 V, Vicm = VCC/2, with RL connected to VCC/2, full temperature range (unless otherwise specified) Symbol Parameter Conditions Min. Typ. Max. Unit DC performance Top = 25 °C 0.1 4.5 Offset voltage, TSV91x Tmin < Top < Tmax 7.5 Vio mV Top = 25 °C 1.5 Offset voltage, TSV91xA Tmin < Top < Tmax 3 ∆Vio/∆T Input offset voltage drift 5 μV/°C Top = 25 °C 1 10 Iio Input offset current (1) Tmin < Top < Tmax 100 pA Top = 25 °C 1 10 Iib Input bias current (1) Tmin < Top < Tmax 100 Common mode rejection 0 V to 2.5 V, Vout = 1.25 V, 58 75 CMR Top = 25 °C ratio, 20 log (ΔVic/ΔVio) Tmin < Top < Tmax 53 dB RL = 10 kΩ, Vout = 0.5 V to 2 V, 80 89 Avd Large signal voltage gain Top = 25 °C Tmin < Top < Tmax 75 RL = 10 kΩ 15 40 VCC - High-level output voltage Tmin < Top < Tmax 40 VOH RL = 600 Ω 45 150 Tmin < Top < Tmax 150 mV RL = 10 kΩ 15 40 Tmin < Top < Tmax 40 VOL Low-level output voltage RL = 600 Ω 45 150 Tmin < Top < Tmax 150 Vo = 2.5 V, Top = 25 °C 18 32 Isink Tmin < Top < Tmax 16 Iout Vo = 0 V, Top = 25 °C 18 35 Isource mA Tmin < Top < Tmax 16 Supply current No load, Vout = VCC/2 0.78 1.1 ICC (per channel) Tmin < Top < Tmax 1.1 6/27 DocID12584 Rev 10

TSV91x, TSV91xA Electrical characteristics Symbol Parameter Conditions Min. Typ. Max. Unit AC performance GBP Gain bandwidth product RL = 2 kΩ, CL = 100 pF, 8 f = 100 kHz, Top = 25 °C MHz Fu Unity gain frequency RToLp == 22 5kΩ °C, C L = 100 pF, 7.2 ϕm Phase margin RL = 2 kΩ, CL = 100 pF, 45 Degrees Top = 25 °C Gm Gain margin RToLp == 22 5kΩ °C, C L = 100 pF, 8 dB SR Slew rate RL = 2 kΩ, CL = 100 pF, Av = 1, 4.5 V/μs Top = 25 °C Equivalent input noise en voltage f = 10 kHz, Top = 25 °C 21 nV/√Hz G = 1, f = 1 kHz, RL = 2 kΩ, THD+en Total harmonic distortion BW = 22 kHz, Top = 25 °C, 0.001 % Vicm = (VCC + 1)/2, Vout = 1.1 Vpp Notes: (1)Guaranteed by design DocID12584 Rev 10 7/27

Electrical characteristics TSV91x, TSV91xA Table 5: Electrical characteristics at VCC+ = 3.3 V, VCC- = 0 V, Vicm = VCC/2, with RL connected to VCC/2, full temperature range (unless otherwise specified) Symbol Parameter Conditions Min. Typ. Max. Unit DC performance Top = 25 °C 0.1 4.5 Offset voltage, TSV91x Tmin < Top < Tmax 7.5 Vio mV Top = 25 °C 1.5 Offset voltage, TSV91xA Tmin < Top < Tmax 3 ∆Vio/∆T Input offset voltage drift 5 μV/°C Top = 25 °C 1 10 Iio Input offset current (1) Tmin < Top < Tmax 100 pA Top = 25 °C 1 10 Iib Input bias current (1) Tmin < Top < Tmax 100 Common mode rejection 0 V to 3.3 V, Vout = 1.65 V, 60 78 CMR Top = 25 °C ratio, 20 log (ΔVic/ΔVio) Tmin < Top < Tmax 55 dB RL = 10 kΩ, Vout = 0.5 V to 2.8 V, 80 89 Avd Large signal voltage gain Top = 25 °C Tmin < Top < Tmax 75 RL = 10 kΩ 15 40 VCC - High-level output voltage Tmin < Top < Tmax 40 VOH RL = 600 Ω 45 150 Tmin < Top < Tmax 150 mV RL = 10 kΩ 15 40 Tmin < Top < Tmax 40 VOL Low-level output voltage RL = 600 Ω 45 150 Tmin < Top < Tmax 150 Vo = 3.3 V, Top = 25 °C 18 32 Isink Tmin < Top < Tmax 16 Iout Vo = 0 V, Top = 25 °C 18 35 Isource mA Tmin < Top < Tmax 16 Supply current No load, Vout = VCC/2 0.8 1.1 ICC (per channel) Tmin < Top < Tmax 1.1 AC performance GBP Gain bandwidth product RL = 2 kΩ, CL = 100 pF, 8 f = 100 kHz, Top = 25 °C MHz Fu Unity gain frequency RToLp == 22 5kΩ °C, C L = 100 pF, 7.2 ϕm Phase margin RL = 2 kΩ, CL = 100 pF, 45 Degrees Top = 25 °C Gm Gain margin RToLp == 22 5kΩ °C, C L = 100 pF, 8 dB 8/27 DocID12584 Rev 10

TSV91x, TSV91xA Electrical characteristics Symbol Parameter Conditions Min. Typ. Max. Unit SR Slew rate RL = 2 kΩ, CL = 100 pF, Av = 1, 4.5 V/μs Top = 25 °C Equivalent input noise en voltage f = 10 kHz, Top = 25 °C 21 nV/√Hz G = 1, f = 1 kHz, RL = 2 kΩ, THD+en Total harmonic distortion BW = 22 kHz, Top = 25 °C, 0.0007 % Vicm = (VCC + 1)/2, Vout = 1.9 Vpp Notes: (1)Guaranteed by design DocID12584 Rev 10 9/27

Electrical characteristics TSV91x, TSV91xA Table 6: Electrical characteristics at VCC+ = 5 V, VCC- = 0 V, Vicm = VCC/2, with RL connected to VCC/2, full temperature range (unless otherwise specified) Symbol Parameter Conditions Min. Typ. Max. Unit DC performance Top = 25 °C 0.1 4.5 Offset voltage, TSV91x Tmin < Top < Tmax 7.5 Vio mV Top = 25 °C 1.5 Offset voltage, TSV91xA Tmin < Top < Tmax 3 ∆Vio/∆T Input offset voltage drift 5 μV/°C Top = 25 °C 1 10 Iio Input offset current (1) Tmin < Top < Tmax 100 pA Top = 25 °C 1 10 Iib Input bias current (1) Tmin < Top < Tmax 100 Common mode rejection 0 V to 5 V, Vout = 2.5 V, 62 82 CMR Top = 25 °C ratio, 20 log (ΔVic/ΔVio) Tmin < Top < Tmax 58 Supply voltage rejection SVR ratio, 20 log (ΔVCC/ΔVio) VCC = 2.5 to 5 V 70 86 dB RL = 10 kΩ, Vout = 0.5 V to 4.5 V, 80 91 Avd Large signal voltage gain Top = 25 °C Tmin < Top < Tmax 75 RL = 10 kΩ 15 40 VCC - High-level output voltage Tmin < Top < Tmax 40 VOH RL = 600 Ω 45 150 Tmin < Top < Tmax 150 mV RL = 10 kΩ 15 40 Tmin < Top < Tmax 40 VOL Low-level output voltage RL = 600 Ω 45 150 Tmin < Top < Tmax 150 Vo = 5 V, Top = 25 °C 18 32 Isink Tmin < Top < Tmax 16 Iout Vo = 0 V, Top = 25 °C 18 35 Isource mA Tmin < Top < Tmax 16 Supply current (per No load, Vout = 2.5 V 0.78 1.1 ICC channel) Tmin < Top < Tmax 1.1 AC performance GBP Gain bandwidth product RL = 2 kΩ, CL = 100 pF, 8 f = 100 kHz, Top = 25 °C MHz Fu Unity gain frequency RToLp == 22 5kΩ °C, C L = 100 pF, 7.5 ϕm Phase margin RL = 2 kΩ, CL = 100 pF, 45 Degrees Top = 25 °C 10/27 DocID12584 Rev 10

TSV91x, TSV91xA Electrical characteristics Symbol Parameter Conditions Min. Typ. Max. Unit Gm Gain margin RToLp == 22 5kΩ °C, C L = 100 pF, 8 dB SR Slew rate RL = 2 kΩ, CL = 100 pF, Av = 1, 4.5 V/μs Top = 25 °C Equivalent input noise f = 1 kHz, Top = 25 °C 27 en voltage f = 10 kHz, Top = 25 °C 21 nV/√Hz G = 1, f = 1 kHz, RL = 2 kΩ, THD+en Total harmonic distortion BW = 22 kHz, Top = 25 °C, 0.0004 % Vicm = (VCC + 1)/2, Vout = 3.6 Vpp Notes: (1)Guaranteed by design DocID12584 Rev 10 11/27

Electrical characteristic curves TSV91x, TSV91xA 4 Electrical characteristic curves Figure 2: Input offset voltage distribution at T = 25 °C Figure 3: Input offset voltage distribution at T = 125 °C ° ° Figure 4: Supply current vs. input common-mode Figure 5: Supply current vs. input common-mode voltage at VCC = 2.5 V voltage at VCC = 5 V Figure 6: Output current vs. output voltage at Figure 7: Output current vs. output voltage at VCC = 2.5 V VCC = 5 V 12/27 DocID12584 Rev 10

TSV91x, TSV91xA Electrical characteristic curves Figure 8: Voltage gain and phase vs. frequency at VCC Figure 9: Voltage gain and phase vs. frequency at VCC = 2.5 V and Vicm = 0.5 V = 5.5 V and Vicm = 0.5 V Figure 10: Phase margin vs. capacitive load Figure 11: Phase margin vs. output current Figure 12: Positive slew rate Figure 13: Negative slew rate DocID12584 Rev 10 13/27

Electrical characteristic curves TSV91x, TSV91xA Figure 14: Distortion + noise vs. frequency Figure 15: Distortion + noise vs. output voltage Figure 16: Noise vs. frequency Figure 17: Phase margin vs. capacitive load and serial resistor Figure 18: Supply current vs. supply voltage 14/27 DocID12584 Rev 10

TSV91x, TSV91xA Application information 5 Application information 5.1 Driving resistive and capacitive loads These products are low-voltage, low-power operational amplifiers optimized to drive rather large resistive loads above 2 kΩ. In a follower configuration, these operational amplifiers can drive capacitive loads up to 100 pF with no oscillations. When driving larger capacitive loads, adding a small in-series resistor at the output can improve the stability of the device (Figure 19 shows the recommended in-series resistor values). Once the in-series resistor value has been selected, the stability of the circuit should be tested on bench and simulated with the simulation model. Figure 19: In-series resistor vs. capacitive load 5.2 PCB layouts For correct operation, it is advised to add 10 nF decoupling capacitors as close as possible to the power supply pins. 5.3 Macromodel An accurate macromodel of the TSV91x is available on STMicroelectronics’ web site at: www.st.com. This model is a trade-off between accuracy and complexity (that is, time simulation) of the TSV91x operational amplifiers. It emulates the nominal performances of a typical device within the specified operating conditions mentioned in the datasheet. It helps to validate a design approach and to select the right operational amplifier, but it does not replace on-board measurements. DocID12584 Rev 10 15/27

Package information TSV91x, TSV91xA 6 Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. 16/27 DocID12584 Rev 10

TSV91x, TSV91xA Package information 6.1 SOT23-5 package information Figure 20: SOT23-5 package outline Table 7: SOT23-5 mechanical data Dimensions Ref. Millimeters Inches Min. Typ. Max. Min. Typ. Max. A 0.90 1.20 1.45 0.035 0.047 0.057 A1 0.15 0.006 A2 0.90 1.05 1.30 0.035 0.041 0.051 B 0.35 0.40 0.50 0.014 0.016 0.020 C 0.09 0.15 0.20 0.004 0.006 0.008 D 2.80 2.90 3.00 0.110 0.114 0.118 D1 1.90 0.075 e 0.95 0.037 E 2.60 2.80 3.00 0.102 0.110 0.118 F 1.50 1.60 1.75 0.059 0.063 0.069 L 0.10 0.35 0.60 0.004 0.014 0.024 K 0 degrees 10 degrees 0 degrees 10 degrees DocID12584 Rev 10 17/27

Package information TSV91x, TSV91xA 6.2 DFN8 2 x 2 package information Figure 21: DFN8 2 x 2 package outline Table 8: DFN8 2 x 2 mechanical data Dimensions Ref. Millimeters Inches Min. Typ. Max. Min. Typ. Max. A 0.51 0.55 0.60 0.020 0.022 0.024 A1 0.05 0.002 A3 0.15 0.006 b 0.18 0.25 0.30 0.007 0.010 0.012 D 1.85 2.00 2.15 0.073 0.079 0.085 D2 1.45 1.60 1.70 0.057 0.063 0.067 E 1.85 2.00 2.15 0.073 0.079 0.085 E2 0.75 0.90 1.00 0.030 0.035 0.039 e 0.50 0.020 L 0.425 0.017 ddd 0.08 0.003 18/27 DocID12584 Rev 10

TSV91x, TSV91xA Package information Figure 22: DFN8 2 x 2 recommended footprint The exposed pad of the DFN8 2x2 package is not internally connected. It can be set to ground or left floating. DocID12584 Rev 10 19/27

Package information TSV91x, TSV91xA 6.3 MiniSO8 package information Figure 23: MiniSO8 package outline Table 9: MiniSO8 mechanical data Dimensions Ref. Millimeters Inches Min. Typ. Max. Min. Typ. Max. A 1.1 0.043 A1 0 0.15 0 0.006 A2 0.75 0.85 0.95 0.030 0.033 0.037 b 0.22 0.40 0.009 0.016 c 0.08 0.23 0.003 0.009 D 2.80 3.00 3.20 0.11 0.118 0.126 E 4.65 4.90 5.15 0.183 0.193 0.203 E1 2.80 3.00 3.10 0.11 0.118 0.122 e 0.65 0.026 L 0.40 0.60 0.80 0.016 0.024 0.031 L1 0.95 0.037 L2 0.25 0.010 k 0° 8° 0° 8° ccc 0.10 0.004 20/27 DocID12584 Rev 10

TSV91x, TSV91xA Package information 6.4 SO8 package information Figure 24: SO8 package outline Table 10: SO8 mechanical data Dimensions Ref. Millimeters Inches Min. Typ. Max. Min. Typ. Max A 1.75 0.069 A1 0.10 0.25 0.004 0.010 A2 1.25 0.049 b 0.28 0.48 0.011 0.019 c 0.17 0.23 0.007 0.010 D 4.80 4.90 5.00 0.189 0.193 0.197 E 5.80 6.00 6.20 0.228 0.236 0.244 E1 3.80 3.90 4.00 0.150 0.154 0.157 e 1.27 0.050 h 0.25 0.50 0.010 0.020 L 0.40 1.27 0.016 0.050 L1 1.04 0.040 k 1° 8° 1° 8° ccc 0.10 0.004 DocID12584 Rev 10 21/27

Package information TSV91x, TSV91xA 6.5 TSSOP14 package information Figure 25: TSSOP14 package outline aaa Table 11: TSSOP14 mechanical data Dimensions Ref. Millimeters Inches Min. Typ. Max. Min. Typ. Max. A 1.20 0.047 A1 0.05 0.15 0.002 0.004 0.006 A2 0.80 1.00 1.05 0.031 0.039 0.041 b 0.19 0.30 0.007 0.012 c 0.09 0.20 0.004 0.0089 D 4.90 5.00 5.10 0.193 0.197 0.201 E 6.20 6.40 6.60 0.244 0.252 0.260 E1 4.30 4.40 4.50 0.169 0.173 0.176 e 0.65 0.0256 L 0.45 0.60 0.75 0.018 0.024 0.030 L1 1.00 0.039 k 0° 8° 0° 8° aaa 0.10 0.004 22/27 DocID12584 Rev 10

TSV91x, TSV91xA Package information 6.6 SO14 package information Figure 26: SO14 package outline Table 12: SO14 mechanical data Dimensions Ref. Millimeters Inches Min. Typ. Max. Min. Typ. Max. A 1.35 1.75 0.05 0.068 A1 0.10 0.25 0.004 0.009 A2 1.10 1.65 0.04 0.06 B 0.33 0.51 0.01 0.02 C 0.19 0.25 0.007 0.009 D 8.55 8.75 0.33 0.34 E 3.80 4.0 0.15 0.15 e 1.27 0.05 H 5.80 6.20 0.22 0.24 h 0.25 0.50 0.009 0.02 L 0.40 1.27 0.015 0.05 k 8° (max) ddd 0.10 0.004 DocID12584 Rev 10 23/27

Ordering information TSV91x, TSV91xA 7 Ordering information Table 13: Order codes Order code Temperature range Package Packing Marking TSV911IDT Tube or tape and V911I SΟ8 TSV911AIDT reel V911AI TSV911ILT K127 TSV911AILT SOT23-5 K128 TSV911RILT Tape and reel K125 TSV912IST K125 MiniSO8 TSV912AIST K126 TSV912IDT Tube or tape and V912I SO8 TSV912AIDT reel V912AI TSV912IQ2T DFN8 2x2 K1Q TSV914IPT Tape and reel V914I TSSOP14 TSV914AIPT V914AI TSV914IDT Tube or tape and V914I -40 °C to 125 °C SO14 TSV914AIDT reel V914AI TSV911IYLT (1) SOT23-5, K147 TSV911AIYLT (1) automotive grade K148 TSV911IYDT (1) V911IY TSV911AIYDT (1) SO-8, V911AIY TSV912IYDT (1) automotive grade V912IY TSV912AIYDT (1) V912AY Tape and reel TSV912IYST (1) MiniSO8, K147 TSV912AIYST (1) automotive grade K148 TSV914IYDT (1) SO14, V914IY TSV914AIYDT (1) automotive grade V914AY TSV914IYPT (1) TSSOP14, V914IY TSV914AIYPT (1) automotive grade V914AY Notes: (1)Qualification and characterization according to AEC Q100 and Q003 or equivalent, advanced screening according to AEC Q001 & Q 002 or equivalent. 24/27 DocID12584 Rev 10

TSV91x, TSV91xA Revision history 8 Revision history Table 14: Document revision history Date Revision Changes 28-Aug-2006 1 First release. Modified ESD CDM parameter for SO-14 package in Table 2: Absolute maximum ratings. Noise parameters updated in Section 2: Electrical characteristics. 07-Jun-2007 2 Added limits in temperature in Section 2: Electrical characteristics. Added automotive grade level description in Table 13: Order codes. Added footnote about SO-14 package in Table 13: Order codes. Added Figure 16: Phase margin vs. capacitive load and serial resistor. Updated footnotes for ESD parameters in Table 2: Absolute maximum ratings. Corrected MiniSO-8 package information in Table 9: MiniSO-8 package 11-Feb-2008 3 mechanical data. Added missing markings for order codes TSV911AILT and TSV912AILT in Table 13: Order codes. Added input current information in Table 2: Absolute maximum ratings. Changed Figure 7 and Figure 8. Added Chapter 3: Application information. 22-Jun-2009 4 Updated package information in Chapter 4. Added automotive order codes: TSV911IYLT, TSV911AIYLT, TSV912IYST, TSV912AIYST, TSV914IYPT and TSV914AIYPT in Table 13: Order codes. Added A versions of devices in title on cover page. Modified ESD value for machine model in Table 2: Absolute maximum 17-Sep-2009 5 ratings. Added Figure 17: Supply current vs. supply voltage on page 10. Added TSV911RILT in Table 13: Order codes, housed in a SOT23-5 18-Mar-2010 6 package with a new pinout. Added pin connections for TSV911ILT and TSV91RILT on cover page. Added Table 1: Device summary on cover page. Modified supply voltage value in Table 3. 24-Jun-2010 7 Corrected typical value of DVio in Table 4, Table 5 and Table 6. Added TSV911RILT, TSV911IYDT and TSV911AIYDT order codes in Table 13. Modified Note 2 under Table 13. Added DFN8 2x2 package and ordering information for TSV912 device 06-Mar-2012 8 to Chapter 4 and Chapter 5. Updated layout Section 2: replaced DVio/DT by ∆Vio/∆T. Section 5.2: updated name of package and title of drawings and table; 27-Nov-2015 9 added note about exposed pad. Table 13: "Order codes": removed obsolete order codes (TSV911ID, TSV911AID, TSV912ID, TSV912AID, TSV914ID, TSV914AID). DocID12584 Rev 10 25/27

Revision history TSV91x, TSV91xA Date Revision Changes Added silhouettes of packages to cover page Placed pinout diagrams in Section 2: "Package pin connections" Added Related products Description: added footnote 1 29-Aug-2016 10 Section 7.2: "DFN8 2 x 2 package information": modified note about the exposed pad. Section 8: "Ordering information": removed note regarding "moisture sensitivity level 1". 26/27 DocID12584 Rev 10

TSV91x, TSV91xA IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2016 STMicroelectronics – All rights reserved DocID12584 Rev 10 27/27

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: S TMicroelectronics: TSV912IDT TSV912IST TSV912ID TSV914AIPT TSV911AILT TSV911AIDT TSV912AIDT TSV912AID TSV914AID TSV911ID TSV911AID TSV911AIYDT TSV911AIYLT TSV911IYDT TSV911IYLT TSV912AIYDT TSV912AIYST TSV912IYDT TSV914IYDT TSV912IQ2T TSV912AIST TSV914IPT TSV911IDT TSV911ILT TSV914AIDT TSV914ID TSV914IDT TSV911RILT TSV914IYPT TSV912IYST TSV914AIYDT TSV914AIYPT