E M C C o m p o n e n t s Common mode filters Cl Pb Br Ultra high-speed differential signal line (HDMI, DVI, DisplayPort, USB3.0, etc.) TCM-S series RoHS SRVEHCA-CFrHee HaFlroegeen LFereaed TCM0403S type FEATURES This product is a thin-film common mode filter with a wide frequency range that can be used for high-speed differential signal interfaces such as USB3.0 and DisplayPort. Has EMC suppression by achieving wide frequency range (6GHz and higher) differential mode transmission while ensuring common mode impedance with virtually no affect on the high-speed differential transmission line signal. Lineup includes 0403 (L0.45×W0.30×T0.23mm), the industry's smallest thin-film common mode filter. Operating temperature range: –25 to +85°C APPLICATION Noise countermeasure for ultra-high-speed differential interfaces (HDMI, DVI, DisplayPort, USB3.0, etc.) for mobile devices and general consumer products such as smart phones, tablets, digital cameras, and portable music players. Application guides: Smart phones/tablets PART NUMBER CONSTRUCTION TCM 0403 S - 350 - 2P - T 210 L×W×T dimensions Product Impedance Number of Internal Series name Packaging style 0.45×0.3×0.23 mm internal code () at 100MHz lines code CHARACTERISTICS SPECIFICATION TABLE Common mode DC resistance Cutoff Rated current Rated voltage Insulation Part No. impedance frequency resistance [at 100MHz] [1 line] () Tolerance ()max. (GHz)typ. (A)max. (V)max. (M)min. 35 ±12 3.0±30% 7.0 0.05 5 10 TCM0403S-350-2P-T210 Measurement equipment Measurement item Product No. Manufacturer Common mode impedance 4291A Keysight Technologies DC resistance 4338A Keysight Technologies Insulation resistance 4339A Keysight Technologies ＊Equivalent measurement equipment may be used. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. (1/4) Please note that the contents may change without any prior notice due to reasons such as upgrading. 20181101 cmf_commercial_signal_tcm0403s_en.fm

E M C C o m p o n e n t s TCM0403S type IMPEDANCE VS. FREQUENCY CHARACTERISTICS 10000 1000 Ω) (ce 350 Common mode n100 a d e p m I 350 Differential mode 10 1 1 10 100 1000 10000 Frequency (MHz) Measurement equipment Product No. Manufacturer 4991A Keysight Technologies ＊Equivalent measurement equipment may be used. INSERTION LOSS VS. FREQUENCY CHARACTERISTICS 0 350 Differential mode 5 10 350 Common mode )B 15 d (s s o n l 20 o serti 25 n I 30 35 40 1 10 100 1000 10000 Frequency (MHz) Measurement equipment Product No. Manufacturer E5071B Keysight Technologies ＊Equivalent measurement equipment may be used. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. (2/4) Please note that the contents may change without any prior notice due to reasons such as upgrading. 20181101 cmf_commercial_signal_tcm0403s_en.fm

E M C C o m p o n e n t s TCM0403S type SHAPE & DIMENSIONS PACKAGING STYLE REEL DIMENSIONS 0.30±0.02 1 4 2.0±0.5 E 0.45±0.02 2 3 0.23±0.02 0.08typ. +10–0 6 ø 0.325 0.125±0.03 1.0 ø13±0.2 9+0.3 0.075±0.03 Dimensions in mm ø21±0.8 13+1.4 ø180+–30 Dimensions in mm RECOMMENDED LAND PATTERN TAPE DIMENSIONS 0.45 1 5 1 4 0.20 Shoplreocket 1.5+–00..01 2.0±0.5 4.0±0.1 75±0. 5±0.0 1. 3. 0.60 0.20 3 2 3 0. ± 0.15 0.15 B 8.0 Dimensions in mm K A Cavity 2.0±0.5 Dimensions in mm CIRCUIT DIAGRAM Type A B K TCM0403S 0.40 0.55 0.27 1 4 160min. Taping 200min. 2 3 (cid:129)No polarity Drawing direction 300min. RECOMMENDED REFLOW PROFILE Dimensions in mm Preheating Soldering Natural PACKAGE QUANTITY cooling Peak Package quantity 10,000 pcs/reel 245°C TEMPERATURE RANGE, INDIVIDUAL WEIGHT e 230°C 230°C ur Operating Storage Individual at er temperature range temperature range weight p m –25 to +85 °C –25 to +85 °C 0.2 mg e 180°C T  The storage temperature range is for after the assembly. 5s max. 150°C 60 to 120s 10 to 30s Time Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. (3/4) Please note that the contents may change without any prior notice due to reasons such as upgrading. 20181101 cmf_commercial_signal_tcm0403s_en.fm

E M C C o m p o n e n t s REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using this products. REMINDERS The storage period is less than 6 months. Be sure to follow the storage conditions (temperature: 5 to 40°C, humidity: 20 to 70% RH or less). If the storage period elapses, the soldering of the terminal electrodes may deteriorate. Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature does not exceed 150°C. Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur. When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal design. Carefully lay out the coil for the circuit board design of the non-magnetic shield type. A malfunction may occur due to magnetic interference. Use a wrist band to discharge static electricity in your body through the grounding wire. Do not expose the products to magnets or magnetic fields. Do not use for a purpose outside of the contents regulated in the delivery specifications. The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equip- ment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equip- ment, industrial robots) under a normal operation and use condition. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or qual- ity require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in the each catalog, please contact us. (1) Aerospace/aviation equipment (8) Public information-processing equipment (2) Transportation equipment (cars, electric trains, ships, etc.) (9) Military equipment (3) Medical equipment (10) Electric heating apparatus, burning equipment (4) Power-generation control equipment (11) Disaster prevention/crime prevention equipment (5) Atomic energy-related equipment　　 (12) Safety equipment (6) Seabed equipment (13) Other applications that are not considered general-purpose (7) Transportation control equipment applications When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing pro- tection circuit/device or providing backup circuits in your equipment. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. (4/4) Please note that the contents may change without any prior notice due to reasons such as upgrading. 20181101 cmf_commercial_signal_tcm0403s_en.fm

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: T DK: TCM0403S-350-2P