图片仅供参考

详细数据请看参考数据手册

Datasheet下载
  • 型号: SMBJ60CA
  • 制造商: Bourns
  • 库位|库存: xxxx|xxxx
  • 要求:
数量阶梯 香港交货 国内含税
+xxxx $xxxx ¥xxxx

查看当月历史价格

查看今年历史价格

SMBJ60CA产品简介:

ICGOO电子元器件商城为您提供SMBJ60CA由Bourns设计生产,在icgoo商城现货销售,并且可以通过原厂、代理商等渠道进行代购。 SMBJ60CA价格参考。BournsSMBJ60CA封装/规格:TVS - 二极管, 。您可以下载SMBJ60CA参考资料、Datasheet数据手册功能说明书,资料中有SMBJ60CA 详细功能的应用电路图电压和使用方法及教程。

产品参数 图文手册 常见问题
参数 数值
产品目录

电路保护

描述

TVS DIODE 60VWM SMDTVS 二极管 - 瞬态电压抑制器 60volts 5uA 6.2 Amps Bi-Dir

产品分类

TVS - 二极管

品牌

Bourns Inc.

产品手册

点击此处下载产品Datasheet

产品图片

rohs

RoHS 合规性豁免无铅 / 符合限制有害物质指令(RoHS)规范要求

产品系列

二极管与整流器,TVS二极管,TVS 二极管 - 瞬态电压抑制器,Bourns SMBJ60CASMBJ

数据手册

点击此处下载产品Datasheet

产品型号

SMBJ60CA

RoHS指令信息

点击此处下载产品Datasheet

不同频率时的电容

-

产品目录绘图

产品目录页面

点击此处下载产品Datasheet

产品种类

TVS 二极管 - 瞬态电压抑制器

供应商器件封装

SMB (DO-214AA)

其它名称

SMBJ60CABCT

击穿电压

66.7 V to 76.7 V

功率-峰值脉冲

600W

包装

剪切带 (CT)

单向通道

-

双向通道

1

商标

Bourns

安装类型

表面贴装

安装风格

SMD/SMT

封装

Reel

封装/外壳

DO-214AA,SMB

封装/箱体

DO-214AA

尺寸

3.94 mm W x 4.57 mm L x 2.62 mm H

峰值浪涌电流

100 A

峰值脉冲功率耗散

600 W

工作温度

-55°C ~ 150°C (TJ)

工作电压

3.5 V

工厂包装数量

3000

应用

通用

最大工作温度

+ 150 C

最小工作温度

- 55 C

极性

Bidirectional

标准包装

1

特色产品

http://www.digikey.com/product-highlights/cn/zh/bourns-smx-tvs-diodes/1448

电压-击穿(最小值)

66.7V

电压-反向关态(典型值)

60V

电压-箝位(最大值)@Ipp

-

电流-峰值脉冲(10/1000µs)

-

电源线路保护

端接类型

SMD/SMT

类型

齐纳

系列

SMBJ

SMBJ60CA 相关产品

MSMBG13CA

品牌:Microsemi Corporation

价格:

MSMBJ6.5CAE3

品牌:Microsemi Corporation

价格:

30KPA30A-B

品牌:Littelfuse Inc.

价格:

SMCJ70CA-13-F

品牌:Diodes Incorporated

价格:

SMA6J15CA-TP

品牌:Micro Commercial Co

价格:

P4SMA150A-E3/61

品牌:Vishay Semiconductor Diodes Division

价格:

1.5SMC15A-M3/57T

品牌:Vishay Semiconductor Diodes Division

价格:

5.0SMDJ12CA

品牌:Littelfuse Inc.

价格:

PDF Datasheet 数据手册内容提取

SMBJ5.0 THRU SMBJ440CA Stand-off Voltage - 5.0 to 440 Volts Peak Pulse Power: 600 Watts SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Features  For surface mounted applications in order to optimize board DO-214AA/SMB  space Low profile package  Built-in strain relief  Glass passivated junction 0.086 (2.20) 0.155(3.94) 0.071 (1.80) 0.130(3.30)  Low inductance  Excellent clamping capability  600W peak pulse power capability at 10/1000μs waveform, 00..118650((44..7006))  repetition rate (duty cycle): 0.01%  Fast response time 0.012(0.305) 0.006(0.152)  Typical IR less than 1μA above 10V 0.096(2.44)  High Temperature soldering: 260℃/10 seconds at terminals 0.084(2.13)  Plastic package has underwriters laboratory flammability 94V-0 0.060(1.52) 0.030(0.76) 0.008(0.203)MAX. 0.220(5.59) Mechanical Data 0.200(5.08) Case : JEDEC DO-214AA/SMB molded plastic body Terminals : Solderable per MIL-STD-750,Method 2026 Polarity : Polarity symbol marking on body Dimensionsininchesand(millimeters) Mounting Position : Any Weight : 0.003 ounce, 0.095 grams Standard Packaging: 12mm tape (EIA STD RS-481) Applications I/Ointerface AC/DCpo w ersupply Lowfrequencysignaltransmissionline(RS232,RS485,etc.) MAXIMUM RATINGS AND CHARACTERISTICS Ratingsat25℃ ambienttemperatureunlessotherwisespecified. Peak pulse power dissipation at 10/1000μswaveform P Minimum 600 W (Note1, Note2, Fig.1) PPM Peak pulse current of at 10/1000μs waveform (Note 1, Fig.3) I See Table A PPM Steady state power dissipation atTA=50℃(Fig.5) PM(AV) 5.0 W Peak forward surge current, 8.3ms single halfsine-wave I 100 A superimposed on rated load, (JEDEC Method) (Note3, Fig.6) FSM Operating junction and Storage Temperature Range. T ,T -65 to +150 ℃ J STG Typicalthermal resistance junction to lead R 20 ℃/W θJL Typicalthermal resistance junction to ambient R 100 ℃/W θJA Notes:1. Non-repetitive current pulse, per Fig.3 and derated above TA=25℃ per Fig.2. 2. Mounted on 5.0mm×5.0mm (0.03mm thick)copper pads to eachterminal. 3. 8.3mssinglehalfsine-wave,orequivalentsquarewave,dutycycle=4pulsesperminutesmaximum. DN:T20518A0 http://www.microdiode.com Rev:2020A0 Page :1

SMBJ5.0 THRU SMBJ440CA Stand-off Voltage - 5.0 to 440 Volts Peak Pulse Power: 600 Watts Electrical Characteristics (TA=25℃℃) Maximum Device Reverse Breakdown Peak Reverse Test Clamping Part Number Marking Stand-Off Voltage Pulse Leakage Current Voltage Code Voltage @IT @IPP Current @VRWM Unidirectional Bidirectional UNI BI VRWM(V) VBR(V) IT(mA) VC(V) IPP(A) IR(μA) SMBJ5.0A SMBJ5.0CA KE AE 5.0 6.40~7.00 10 9.2 65.3 800 SMBJ6.0A SMBJ6.0CA KG AG 6.0 6.67~7.37 10 10.3 58.3 800 SMBJ6.5A SMBJ6.5CA KK AK 6.5 7.22~7.98 10 11.2 53.6 500 SMBJ7.0A SMBJ7.0CA KM AM 7.0 7.78~8.60 10 12.0 50.0 200 SMBJ7.5A SMBJ7.5CA KP AP 7.5 8.33~9.21 1 12.9 46.6 100 SMBJ8.0A SMBJ8.0CA KR AR 8.0 8.89~9.83 1 13.6 44.2 50 SMBJ8.5A SMBJ8.5CA KT AT 8.5 9.44~10.40 1 14.4 41.7 20 SMBJ9.0A SMBJ9.0CA KV AV 9.0 10.00~11.10 1 15.4 39.0 10 SMBJ10A SMBJ10CA KX AX 10.0 11.10~12.30 1 17.0 35.3 5 SMBJ11A SMBJ11CA KZ AZ 11.0 12.20~13.50 1 18.2 33.0 1 SMBJ12A SMBJ12CA LE BE 12.0 13.30~14.70 1 19.9 30.2 1 SMBJ13A SMBJ13CA LG BG 13.0 14.40~15.90 1 21.5 28.0 1 SMBJ14A SMBJ14CA LK BK 14.0 15.60~17.20 1 23.2 25.9 1 SMBJ15A SMBJ15CA LM BM 15.0 16.70~18.50 1 24.4 24.6 1 SMBJ16A SMBJ16CA LP BP 16.0 17.80~19.70 1 26.0 23.1 1 SMBJ17A SMBJ17CA LR BR 17.0 18.90~20.90 1 27.6 21.8 1 SMBJ18A SMBJ18CA LT BT 18.0 20.00~22.10 1 29.2 20.6 1 SMBJ20A SMBJ20CA LV BV 20.0 22.20~24.50 1 32.4 18.6 1 SMBJ22A SMBJ22CA LX BX 22.0 24.40~26.90 1 35.5 16.9 1 SMBJ24A SMBJ24CA LZ BZ 24.0 26.70~29.50 1 38.9 15.5 1 SMBJ26A SMBJ26CA ME CE 26.0 28.90~31.90 1 42.1 14.3 1 SMBJ28A SMBJ28CA MG CG 28.0 31.10~34.40 1 45.4 13.3 1 SMBJ30A SMBJ30CA MK CK 30.0 33.30~36.80 1 48.4 12.4 1 SMBJ33A SMBJ33CA MM CM 33.0 36.70~40.60 1 53.3 11.3 1 SMBJ36A SMBJ36CA MP CP 36.0 40.00~44.20 1 58.1 10.4 1 SMBJ40A SMBJ40CA MR CR 40.0 44.40~49.10 1 64.5 9.3 1 SMBJ43A SMBJ43CA MT CT 43.0 47.80~52.80 1 69.4 8.7 1 SMBJ45A SMBJ45CA MV CV 45.0 50.00~55.30 1 72.7 8.3 1 SMBJ48A SMBJ48CA MX CX 48.0 53.30~58.90 1 77.4 7.8 1 SMBJ51A SMBJ51CA MZ CZ 51.0 56.70~62.70 1 82.4 7.3 1 SMBJ54A SMBJ54CA NE DE 54.0 60.00~66.30 1 87.1 6.9 1 SMBJ58A SMBJ58CA NG DG 58.0 64.40~71.20 1 93.6 6.5 1 SMBJ60A SMBJ60CA NK DK 60.0 66.70~73.70 1 96.8 6.2 1 SMBJ64A SMBJ64CA NM DM 64.0 71.10~78.60 1 103.0 5.9 1 SMBJ70A SMBJ70CA NP DP 70.0 77.80~86.00 1 113.0 5.3 1 SMBJ75A SMBJ75CA NR DR 75.0 83.30~92.10 1 121.0 5.0 1 SMBJ78A SMBJ78CA NT DT 78.0 86.70~95.80 1 126.0 4.8 1 SMBJ85A SMBJ85CA NV DV 85.0 94.40~104.00 1 137.0 4.4 1 SMBJ90A SMBJ90CA NX DX 90.0 100.00~111.00 1 146.0 4.1 1 SMBJ100A SMBJ100CA NZ DZ 100.0 111.00~123.00 1 162.0 3.7 1 SMBJ110A SMBJ110CA PE EE 110.0 122.00~135.00 1 177.0 3.4 1 SMBJ120A SMBJ120CA PG EG 120.0 133.00~147.00 1 193.0 3.1 1 http://www.microdiode.com Rev:2020A0 Page :2

SMBJ5.0 THRU SMBJ440CA Stand-off Voltage - 5.0 to 440 Volts Peak Pulse Power: 600 Watts Electrical Characteristics (TA=25℃℃) Maximum Device Reverse Breakdown Peak Reverse Test Clamping PartNumber Marking Stand-Off Voltage Pulse Leakage Current Voltage Code Voltage @IT @IPP Current @VRWM Unidirectional Bidirectional UNI BI VRWM(V) VBR(V) IT(mA) VC(V) IPP(A) IR(μA) SMBJ130A SMBJ130CA PK EK 130.0 144.00~159.00 1 209.0 2.9 1 SMBJ150A SMBJ150CA PM EM 150.0 167.00~185.00 1 243.0 2.5 1 SMBJ160A SMBJ160CA PP EP 160.0 178.00~197.00 1 259.0 2.3 1 SMBJ170A SMBJ170CA PR ER 170.0 189.00~209.00 1 275.0 2.2 1 SMBJ180A SMBJ180CA PT ET 180.0 201.00~222.00 1 292.0 2.1 1 SMBJ190A SMBJ190CA PA EC 190.0 211.00~233.00 1 308.0 2.0 1 SMBJ200A SMBJ200CA PV EV 200.0 224.00~247.00 1 324.0 1.9 1 SMBJ210A SMBJ210CA PB ED 210.0 237.00~263.00 1 340.0 1.8 1 SMBJ220A SMBJ220CA PX EX 220.0 246.00~272.00 1 356.0 1.7 1 SMBJ250A SMBJ250CA PZ EZ 250.0 279.00~309.00 1 405.0 1.5 1 SMBJ300A SMBJ300CA QE FE 300.0 335.00~371.00 1 486.0 1.3 1 SMBJ350A SMBJ350CA QG FG 350.0 391.00~432.00 1 567.0 1.1 1 SMBJ400A SMBJ400CA QK FK 400.0 447.00~494.00 1 648.0 0.9 1 SMBJ440A SMBJ440CA QM FM 440.0 492.00~543.00 1 713.0 0.9 1 Notes:ForbidirectionaltypehavingV of10Vandless,theI limitisdouble. RWM R Figure1.PeakPulsePowerRatingCurve Figure2.PulseDeratingCurve 100 W) k ( 80 er w o P e 60 s ul P ak 40 e P - M PPP 20 0 0 25 50 75 100 125 150 175 TA-Ambient Temperature(℃) Figure3.PulseWaveform Figure4.TypicalJunctionCapacitance M RS %I nt, e urr C e s ul P k a e P - M IPP http://www.microdiode.com Rev:2020A0 Page :3

SMBJ5.0 THRU SMBJ440CA Stand-off Voltage - 5.0 to 440 Volts Peak Pulse Power: 600 Watts Figure5.SteadyStatePowerDissipationDerating Figure6.MaximumNon-RepetitiveForward Curve SurgeCurrentUni-DirectionalOnly W) ( n o ati p si s Di er w o P e at St y d a e St ,M(AV) P ReflowSoldering RecommendedConditions ProfileFeature Pb-FreeAssembly Averageramp-uprate(T toT ) 3℃/secondmax. L P Preheat -TemperatureMin(T ) 150℃ Smin -TemperatureMax(T ) 200℃ Smax -Time(mintomax)(t ) 60-180seconds S T toT Smax L -Ramp-upRate 3℃/secondmax. Timemaintainedabove: -Temperature(T ) 217℃ L -Time(t ) 60-150seconds L PeakTemperature(T ) 260℃ P Timewithin5℃ofactualPeakTemperature(t ) 20-40seconds P Ramp-downRate 6℃/secondmax. Time25℃toPeakTemperature 8minutesmax. The curve above is for reference only. http://www.microdiode.com Rev:2020A0 Page :4

SMBJ5.0 THRU SMBJ440CA Stand-off Voltage - 5.0 to 440 Volts Peak Pulse Power: 600 Watts Packing information P0 unit:mm P1 d E Item Symbol Tolerance SMB F B W Carrierwidth A 0.1 3.81 Carrierlength B 0.1 5.41 Carrierdepth C 0.1 2.42 Sprockethole d 0.05 15.0 A P 13"Reeloutsidediameter D 2.0 330.00 13"Reelinnerdiameter D1 min 50.00 Feedholediameter D2 0.5 13.00 Sprocketholeposition E 0.1 1.75 D2 D1 Punchholeposition F 0.1 5.55 T Punchholepitch P 0.1 8.00 C Sprocketholepitch P0 0.1 4.00 Embossmentcenter P1 0.1 2.00 D W1 OTavpeerawllitdatphethickness WT 00..31 102..3000 Reelwidth W1 1.0 12.30 Note:Devices are packed in accor dance with EIA standar RS-481-A and specifications listed above. Reel packing COMPONENT INNER REEL CARTON APPROX. PACKAGE REELSIZE REEL SPACING BOX BOX DIA, SIZE CARTON GROSSWEIGHT (pcs) (mm) (pcs) (mm) (mm) (mm) (pcs) (kg) SMB 13" 3,000 4.0 6,000 190*190*41 330 365*365*360 48,000 14.0 Suggested Pad Layout Symbol Unit(mm) Unit(inch) A 2.8 0.110 B 2.4 0.094 C 4.6 0.181 D 2.2 0.086 E 7.0 0.276 Important Notice and Disclaimer Microdiode Electronics (Jiangsu) reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design,purchase or use. Microdiode Electronics (Jiangsu) makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, not does Microdiode Electronics (Jiangsu) assume any liability for application assistance or customer product design. Microdiode Electronics (Jiangsu) does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of Microdiode Electronics (Jiangsu). Microdiode Electronics (Jiangsu) products are not authorized for use as critical components in life support devices or systems without express written approval of Microdiode Electronics (Jiangsu). http://www.microdiode.com Rev:2020A0 Page :5