AC Line Filters Common Mode SC Coils, Standard Series Overview Applications The KEMET SC coils are common mode chokes with a wide • Audio-visual equipment variety of characteristics. These toroidal coils are designed • Home appliances with our proprietary ferrite cores and are useful in various • Power supplies noise countermeasure fields. Benefits • Proprietary 5H ferrite material and equivalents • Suitable for ≥ 150kHz range • Wide variety of sizes and specifications • Operating temperature range from −25°C to +105°C • UL94 V–2 flame retardant rated cap Part Number System SC- 10- 200 Rated Current AC Inductance (mH) Series (A) Minimum SC- 0x- = x A x00 = x mH x0- = x0 A xx- = xx A Example: 200 = 2 mH Examples: 02 = 2 A Note: 10 = 10 A 1 mH can equal code 100 as well as code 101 15 = 15 A Note: Code 05 can equal 5 A as well as 4 A One world. One KEMET © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard LF0005_SC • 11/26/2018 1 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

AC Line Filters – Common Mode SC Coils, Standard Series Magnetic Permeability of Ferrite Material In order to achieve most efficient noise reduction, it is important to select the material according to the target frequency band. Depending on its magnetic permeability, a particular ferrite material will be effective in a certain frequency band. A schematic representation of the relationship between the magnetic permeability of each material and the corresponding effective band range is shown in Figure 1. Materials with higher magnetic permeability are effective in the lower frequency range, while those with lower magnetic permeability are effective in the higher frequency range. Thus, Mn-Zn products are mainly used for reducing conduction noise, while Ni-Zn products are commonly used for radiation noise countermeasures. The effective frequency range varies depending on core shape, size and number of windings. This frequency dependence of the magnetic permeability as shown in the figure serves for reference purposes only and it should be tested on the actual device to determine its effectiveness. S18H, S15H, 10H, 7H, 5H, 1400L and 700L are KEMET’s proprietary ferrite material names. Other materials can also be available on request. Figure 1 - Relationship between the magnetic permeability of each material and its effective frequency range 20,000 Higher magnetic permeability: Mn-Zn Series Higher noise suppression effect in the lower frequency range S18H y S15H t i l i b a e m er 10,000 10H P c Lower magnetic permeability: ti Higher noise suppression effect e n 7H in the higher frequency range g a M 5H Ni-Zn Series 1400L 700L 0 10 kHz 100 kHz 1 MHz 10 MHz 100 MHz 1 GHz Effective Frequency Range © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard LF0005_SC • 11/26/2018 2 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

AC Line Filters – Common Mode SC Coils, Standard Series Dimensions – Millimeters Vertical Type (≤ 5 A) Horizontal Type (≥ 10 A) Mounting Pitch OD T a OD 15 ± 2.0 T 1 2 a b 1 2 3 4 b 0 2. ± 5 1 3 4 1 3 4 2 Dimensions Pin Pitch1 (mm) (Reference) Part Number OD T a b (Maximum) (Maximum) SC-02-101 23 13.0 6 11 SC-02-100 23 18.5 6 17 SC-02-200 23 18.5 6 17 SC-02-300 27 20.0 6 17 SC-02-500 27 20.0 6 17 SC-02-800 34 23.0 7 20 SC-05-100 25 18.5 6 17 SC-05-200 32 22.0 7 21 SC-05-500 34 23.0 7 21 SC-05-800 34 23.0 7 21 SC-10-100 34 24.0 22 21 SC-10-200 47 27.0 30 30 SC-15-100 49 27.0 35 35 SC-15-200 50 28.0 35 35 SC-20-100 60 30.0 40 40 SC-30-100 62 35.0 55 20 1 Pin pitch listed above for reference only. Values not guaranteed. Environmental Compliance All KEMET AC line filters are RoHS Compliant. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard LF0005_SC • 11/26/2018 3 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

AC Line Filters – Common Mode SC Coils, Standard Series Performance Characteristics Item Performance Characteristics Rated Voltage 250 VAC/VDC Withstanding Voltage 2,400 V (2 seconds, between lines) Insulation Resistance > 100 MΩ at 500 VDC (between lines) Rated Current AC Range 2 – 30 A Rated Inductance Range 1 – 8 mH minimum Common mode Inductance Measurement Condition 100 kHz Thermal Class A (105°C) Operating Temperature Range −25°C to +105°C (include self temperature rise) Attenuation (Static Characteristics) and Circuit Diagram A. Switching power supply B. Motor B100 B100 d d 0 Table 1 – Ratings & Part Number Reference 0 = 90 = 90 V V (cid:31) Without SC Coil (cid:31) 1 1 Without SC Coil B) 80 DC RB) esi8s0tance/ d Rated Current Inductance d Temperature Rise Wire Diameter Weight (g) e ( 70Part Number AC (A) (mH) Minimum Lie (ne 7(0mΩ) (K) Maximum (mm) Approximate g Mgaximum a a olt 60 SC-02-101 With SC Coil 2 1 olt11600 40 0.6 15 V V al SC-02-100 2 1 al 100 With SC C40oil 0.6 15 n 50 SC-02-200 2 2 n11500 40 0.6 15 mi SC-02-300 2 3 mi100 40 0.6 16 Ter 40 SC-02-500 2 5 Ter10400 45 0.6 20 SC-02-800 0.5 2 1.0 8 2.0 150 0.5 40 1.0 0.6 2.0 25 SC-05-100 Frequency5 (MHz) 1 50 Freq4u0ency (MHz) 0.8 20 SC-05-200 5 2 70 40 0.8 25 (cid:31)CircuSitC-05-500 4 5 80(cid:31)Circuit 50 0.8 30 SC-05-800 4 8 85 60 0.8 40 SC-10-100 L10 1 20 40 L 1.3 40 SC-10-200 10 2 28 40 1.3 80 Cy Cx L : SC-02-100 Cy Cx L : SC-05-100 LOASDC-15-100 15 Cx : 0.1(cid:31)1F 12 LOAD 40 1C.8x : 0.1(cid:31)F 100 SC-15-200 15 Cy : 47002 pF 12 45 1C.8y : 4700 pF 110 SC-20-10C0y 20 1 8 Cy 45 2.3 135 SC-30-100 30 1 6 40 2.6 190 Frequency Fcrheaqraucetnercisyt iCcharacteristics 1M 1M 1 1 6 6 3 3 100K 1 100K 1 6 6 0022--880000 e () (cid:30)10K 613 0022--220000 e () (cid:30)10K 613 c 3 c 3 an 1K 1 an 1K 1 d 6 d 6 0022--330000 e 3 0022--110000 e 3 p100 p100 m 1 m 1 I 36 I 36 0022--550000 10 1 0022--110011 10 1 6 6 3 3 1 3 6 1 3 6 1 3 6 1 3 6 1 3 1 3 6 1 3 6 1 3 6 1 3 6 1 3 1K 10K 100K 1M 10M 30M 1K 10K 100K 1M 10M 30M Frequency (Hz) Frequency (Hz) 1M 1M 1 1 6 6 3 3 © 1K0E0MKE1T Electronics Co00rp55--o8800ra00tion • KEMET Tower • One East Broward Bou1l0e0vKar1d LF0005_SC • 11/26/2018 4 Fce () (cid:30)ort1 0LKau36136derd00a55--l55e00, 00FL 33301 USA • 954-766-2800 • www.kemet.com ce () (cid:30)10K 36136 1100--110000 1100--220000 an 1K 1 an 1K 1 d 6 0055--220000 d 6 e 3 e 3 p100 p100 m 1 m 1 2200--110000 I 36 I 36 10 1 0055--110000 10 1 6 6 3 3 1 3 6 1 3 6 1 3 6 1 3 6 1 3 1 3 6 1 3 6 1 3 6 1 3 6 1 3 1K 10K 100K 1M 10M 30M 1K 10K 100K 1M 10M 30M Frequency (Hz) Frequency (Hz) 1M 1 6 3 1155--220000 100K 1 6 e () (cid:30)10K 613 1155--110000 c 3 an 1K 1 d 6 e 3 mp100 1 3300--110000 I 36 10 1 6 3 1 3 6 1 3 6 1 3 6 1 3 6 1 3 1K 10K 100K 1M 10M 30M Frequency (Hz) AC Line Filters 13

Common mode Common mode Attenuation (Static Characteristics) and Circuit Diagram A. Switching power supply B. Motor Attenuation (Static Characteristics) and Circuit Diagram B100 B100 d d 0 A. Switching power supply 0 B. Motor = 90 = 90 V=0 dBB) 1V(cid:31)1908000 Without SC Coil V=0 dBB) 1V(cid:31)1908000 Without SC Coil B) 1age (d(cid:31) 8700 Without SC Coil B) 1age (d(cid:31) 8700 Without SC Coil e (dVolt 7600 With SC Coil e (dVolt 7600 agal agal With SC Coil Voltmin 6500 With SC Coil Voltmin 6500 nal Ter 5400 nal Ter 5400 With SC Coil mi 0.5 1.0 2.0 mi 0.5 1.0 2.0 Frequency (MHz) Frequency (MHz) Ter 40 Ter 40 0.5 1.0 2.0 0.5 1.0 2.0 (cid:31)Circuit Frequency (MHz) (cid:31)Circuit Frequency (MHz) L L (cid:31)Circuit (cid:31)Circuit Cy Cx L : SC-02-100 Cy Cx L : SC-05-100 LOAD Cx : 0.1(cid:31)F LOAD Cx : 0.1(cid:31)F L L Cy : 4700 pF Cy : 4700 pF CCyy Cx L : SC-02-100 CyCy Cx L : SC-05-100 LOAD Cx : 0.1(cid:31)F LOAD Cx : 0.1(cid:31)F Cy : 4700 pF Cy : 4700 pF Cy Cy Frequency characteristic Frequency cha1Mracteristic 1M 1 1 6 6 3 3 1010MK 1 1010MK 1 16 16 0022--880000 e () edance () (cid:30)(cid:30)10110001KKKK 61361363613613 00002222----222200000000 0022--110000 e () edance () (cid:30)(cid:30)10110001KKKK 61361363613613 0022--880000 0022--330000 cp100 3 cp100 3 pedanIm1101K00 3611361 0022--110011 0022--110000 pedanIm1101K00 3611361 0022--550000 0022--330000 m 16 m 16 I 1 363 3 6 1 3 6 1 3 6 1 3 6 1 3 I 1 363 3 6 1 0022--5530000 6 1 3 6 1 3 6 1 3 101K1 10K 0022--110011 100K 1M 10M 30M 101K1 10K 100K 1M 10M 30M 6 Frequency (Hz) 6 Frequency (Hz) 3 3 AC Lin1e Filte3rs –6 C1omm3on 6Mo1de SC3 Co6ils1, Stan3da6rd 1Serie3s 1 3 6 1 3 6 1 3 6 1 3 6 1 3 1K 10K 100K 1M 10M 30M 1K 10K 100K 1M 10M 30M Frequency (Hz) Frequency (Hz) Frequency Characteristics cont. 1M 1M 1 1 6 6 3 3 1010MK 1 0055--880000 1010MK 1 ce () pedance () (cid:30)(cid:30)1011100010KKKK0 36113613636136136 00005555----555500000000 0055--880000 0055--220000 ce () pedance () (cid:30)(cid:30)1011100010KKKK0 36113613636136136 11110000----111100000000 11110000----222200000000 danIm 1K 61361 0055--220000 danIm 1K 61361 2200--110000 pe10100 31 0055--110000 pe10100 31 m 16 m 16 2200--110000 I 1 363 3 6 1 3 6 1 3 6 1 3 6 1 3 I 1 363 3 6 1 3 6 1 3 6 1 3 6 1 3 101K1 10K0055--110000 100K 1M 10M 30M 101K1 10K 100K 1M 10M 30M 6 Frequency (Hz) 6 Frequency (Hz) 3 3 1 3 6 1 3 6 1 3 6 1 3 6 1 3 1 3 6 1 3 6 1 3 6 1 3 6 1 3 1K 10K 100K 1M 10M 30M 1K 10K 100K 1M 10M 30M Frequency (Hz) Frequency (Hz) 1M 1 6 3 1155--220000 1010MK 1 16 e () edance () (cid:30)(cid:30)10110001KKKK 61361363613613 11115555----111100000000 1155--220000 dancImp110K0 613361 3300--110000 mpe10100 1361 3300--110000 I 1 363 3 6 1 3 6 1 3 6 1 3 6 1 3 10 1K1 10K 100K 1M 10M 30M 6 Frequency (Hz) 3 1 3 6 1 3 6 1 3 6 1 3 6 1 3 1K 10K 100K 1M 10M 30M Frequency (Hz) AC Line Filters Packaging 13 AC Line Filters Type Packaging Type Pieces Per Box 13 SC-02-101 300 SC-02-100 360 SC-02-200 SC-02-300 300 SC-02-500 SC-02-800 200 SC-05-100 300 SC-05-200 Tray SC-05-500 200 SC-05-800 SC-10-100 SC-10-200 SC-15-100 90 SC-15-200 SC-20-100 60 SC-30-100 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard LF0005_SC • 11/26/2018 5 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

AC Line Filters – Common Mode SC Coils, Standard Series Handling Precautions Precautions for product storage AC Line Filters should be stored in normal working environments. While the chokes themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. KEMET recommends that maximum storage temperature not exceed 40°C and maximum storage humidity not exceed 70% relative humidity. Atmospheres should be free of chlorine and sulfur bearing compounds. Temperature fluctuations should be minimized to avoid condensation on the parts. Avoid storage near strong magnetic fields, as this might magnetize the product. For optimized solderability, AC line filters stock should be used promptly and preferably within 6 months of receipt. Product temperature rise values The values listed for temperature rise are the result of self-heating in wires when the rated current (commercial frequency) is applied. When using the product, check and evaluate the value of the core temperature rise under actual operating conditions. Export Control For customers in Japan For products that are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export license specified by the law is required for export. For customers outside Japan AC line filters should not be used or sold for the use in the development, production, stockpiling, or utilization of any conventional weapons, mass-destruction weapons (nuclear, chemical, biological weapons, or missiles), or any other weapons. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard LF0005_SC • 11/26/2018 6 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

AC Line Filters – Common Mode SC Coils, Standard Series KEMET Electronics Corporation Sales Offi ces For a complete list of our global sales offi ces, please visit www.kemet.com/sales. Disclaimer All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard LF0005_SC • 11/26/2018 7 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: K EMET: SC-30-100 SC-02-500 SC-15-100 SC-10-200 SC-05-500 SC-05-200 SC-02-300 SC-05-100 SC-20-100 SC-05- 800 SC-02-100 SC-02-800 SC-15-200 SC-10-100 SC-02-101 SC-02-200