ZZHH EEmmbboossss TTaappee CCOONNNNEECCTTOORR ZZHH CCOONNNNEECCTTOORR 11..55 mmmm ppiittcchh//DDiissccoonnnneeccttaabbllee CCrriimmpp ssttyyllee ccoonnnneeccttoorrss ZZHH CCOONNNNEECCTTOORR ZZHH CCOONNNNEECCTTOORR Specifications • Current rating: 1.0 A AC/DC (AWG #26) • Voltage rating: 50 V AC/DC • Temperature range: -25℃ to +85℃ ( including temperature rise in applying electrical current) • Contact resistance: Initial value/ 20 mΩ max. After environmental tests/ 30 mΩ max. • Insulation resistance: 500 MΩ min. • Withstanding voltage: 500 VAC/minute The ZH connector is very small with a • Applicable wire: AWG #32 to #26 mounting height of 5.6 mm and a thickness of • Applicable PC board thickness: 0.6 to 1.2 mm, 1.6 mm only 3.5 mm. Contact retention lances on the * I n using the products, refer to "Handling Precautions for Terminals housing make insertion easier, while the and Connectors" described on our website (Technical documents dimple at the center of the contact ensures of Product information page). reliable contact with the post. * RoHS2 compliance * Dimensional unit: mm ● Compact, low profile design * Contact JST for details. ● Housing lances ● Reliable contact construction Standards ● Distortion resistant construction ® ® ® Recognized E60389 ● Compatible with the ZR insulation Certified LR20812 displacement connectors ® PC board layout and Assembly layout ® 〈Through-hole type (viewed from soldering side) 〉 Top entry type Side entry type 3.5 1.5±0.05 1.5 min. 1.5±0.05 1.5 min. (7.1) n. mi 2.2 (5.6) φ0.7±0.03 4.6 min. 3.7） φ0.7±0.03 ） 2.73.4 74 （ 2.3. （ 4.6 Note: 1. Tolerances are non-cumulative: ±0.05 mm for all centers. 2. Hole dimension differ according to the type of PC board and piercing method. If PC boards made of hard material are used, the hole dimensions should be larger. The dimensions above should serve as a guideline. Contact JST for details. 〈SMT type (viewed from connector mounting side) 〉 SM2 type SM4 type 1.3±0.1 1.5±0.1 3.7 Side entry type Top entry type 1.5±0.05 6 0. 1.5×(N-1)+0.9 ） 1.5±0.05 0.9±0.05 ±0.1 2 （6.4 0.7 min. 2 min. （7.4） 0.7 min. 2.3 φ1.1+00.1 7 Side entry type 1.4±0.1 1.1±0.1 ax. 3. 1.5±0.05 （7.4） 2.5 m ±0.19 3 1. 4. 7 3. Note: 1. N...Number of circuits ±0.1 2. Tolerances are non-cumulative: ±0.05 mm for all centers. 1.4 3. The dimensions above should serve as a guideline. Contact JST for details. 0.7 min. 1

ZH Emboss Tape CONNECTOR ZH CONNECTOR ZHコネクタ表1 1.5 mm pitch/Disconnectable Crimp style connectors Contact 4 Model No. Applicable wire Q’ty/ 2.2 mm2 AWG# Insulation O.D. (mm) reel 0.5 1 1.4 1.1 SZH-002T-P0.5 0.08～0.13 28～26 0.8～1.1 13,000 SZH-003T-P0.5 0.032～0.08 32～28 0.5～0.9 16,000 ZH CONNECTOR ZH CONNECTOR Material and Finish 5 1. Phosphor bronze, tin-plated (reflow treatment) RoHS2 compliance 3 0. Crimping Applicator Contact machine Crimp applicator Dies Crimp applicator with dies SZH-002T-P0.5 MK/SZH-002-05 APLMK SZH002-05 AP-K2N MKS-L SZH-003T-P0.5 MK/SZH-003-05 APLMK SZH003-05 Note: Contact JST for fully automatic crimping applicator. Housing No. of Dimensions (mm) Q’ty/ Model No. circuits A B bag B 3.4 2 ZHR-2 1.5 4.5 1,000 1.5 A 3 ZHR-3 3.0 6.0 1,000 Circuit No.1 1.5 4 ZHR-4 4.5 7.5 1,000 3 0. 5 ZHR-5 6.0 9.0 1,000 6 ZHR-6 7.5 10.5 1,000 1 2 3 5 6 6 ZHR-6(3.0) 15.0 18.0 1,000 2 4. 7 ZHR-7 9.0 12.0 1,000 8 ZHR-8 10.5 13.5 1,000 9 ZHR-9 12.0 15.0 1,000 0.3 10 ZHR-10 13.5 16.5 1,000 11 ZHR-11 15.0 18.0 1,000 <For reference> As the color identification, 12 ZHR-12 16.5 19.5 1,000 the following alphabet shall be put in the underlined part. 13 ZHR-13 18.0 21.0 1,000 For availability, delivery and minimum order quantity, contact JST. Material and Finish ex. ZHR-2-oo- PA 66, UL94V-0, natural (white) (blank)...natural (white) K...black R...red E...blue M...green L...lemon yellow RoHS2 compliance LE...light blue DO...dark orange H...gray Note: 1. ZHR-6(3.0) is 6 circuits 3.0mm pitch plugged up. As for this housing, only circuit No.1 is marked. 2. ZHR-6(3.0) is not UL/CSA approved. Through-hole type shrouded header Model No. Dimensions (mm) Q'ty/box Top entry type No. of circuits Topty epnetry Sidtey peentry Top eNnottrey) type Side eNnottery) type A B To pty epnetrySidtey peentry Stidypee e-3n.t4ry <2 circuits> <3 circuits or more> 2 B2B-ZR S2B-ZR B2B-ZR-3.4 S2B-ZR-3.4 1.5 4.5 2,000 2,000 2,000 3 B3B-ZR S3B-ZR B3B-ZR-3.4 S3B-ZR-3.4 3.0 6.0 2,000 2,000 1,000 B 3.5 B 3.5 4 B4B-ZR S4B-ZR B4B-ZR-3.4 S4B-ZR-3.4 4.5 7.5 2,000 2,000 2,000 5 B5B-ZR S5B-ZR B5B-ZR-3.4 S5B-ZR-3.4 6.0 9.0 2,000 1,000 1,000 6 B6B-ZR S6B-ZR B6B-ZR-3.4 S6B-ZR-3.4 7.5 10.5 2,000 1,000 1,000 5 5 4. 4. 7 B7B-ZR S7B-ZR B7B-ZR-3.4 S7B-ZR-3.4 9.0 12.0 1,000 1,000 1,000 8 B8B-ZR S8B-ZR B8B-ZR-3.4 S8B-ZR-3.4 10.5 13.5 1,000 1,000 1,000 C Nircou.1it 2.73.4ote) Circuit 2.7ote) 3.4 1 09 BB91B0B-Z-ZRR SS91B0B-Z-ZRR BB91B0B-Z-ZRR-3-.34.4 SS91B0B-Z-ZRR-3-.34.4 1123..05 1156..05 11,,000000 11,,000000 11,,000000 A 1.5 2.2 N φ0.5 1.5 No.1 N 11 B11B-ZR S11B-ZR B11B-ZR-3.4 S11B-ZR-3.4 15.0 18.0 1,000 500 500 A 1.5 2.2 12 B12B-ZR S12B-ZR B12B-ZR-3.4 S12B-ZR-3.4 16.5 19.5 1,000 500 500 13 B13B-ZR S13B-ZR B13B-ZR-3.4 S13B-ZR-3.4 18.0 21.0 500 500 500 Material and Finish Side entry type Pin: Brass, copper-undercoated, tin-plated (reflow treatment) B Wafer: Glass-filled PA 66, UL94V-0, natural (ivory) RoHS2 compliance This product displays (LF)(SN) on a label. 7 Note: Headers with 3.4mm long solder tails, suited for the 1.6mm thick PC TSJ 2.4 3. board. 2.7e) 3.4 <For reference> As the color identification, ot the following alphabet shall be put in the underlined part. Circuit No.1 φ0.5 4.6 1.4 N For availability, delivery and minimum order quantity, contact JST. 1.5 ex. B2B-ZR-3.4-oo- A 1.5 (blank)...natural (ivory) K...black R...red E...blue M...green Y...Yellow 2

ZH Emboss Tape CONNECTOR ZH CONNECTOR 1.5 mm pitch/Disconnectable Crimp style connectors ZH CONNECTOR ZH CONNECTOR SMT type shrouded header SM2 type SM2 type No. of Model No. Dimensions (mm) Q’ty/ Side entry type circuits Side entry type A B reel 2 S2B-ZR-SM2-TF 1.5 4.5 1,000 3 S3B-ZR-SM2-TF 3.0 6.0 1,000 4 S4B-ZR-SM2-TF 4.5 7.5 1,000 5 S5B-ZR-SM2-TF 6.0 9.0 1,000 B 6 S6B-ZR-SM2-TF 7.5 10.5 1,000 A 1.5 5 1.5 Circuit No.1 1.5 1 7 S7B-ZR-SM2-TF 9.0 12.0 1,000 8 S8B-ZR-SM2-TF 10.5 13.5 1,000 9 S9B-ZR-SM2-TF 12.0 15.0 1,000 TSJH 3.7 10 S10B-ZR-SM2-TF 13.5 16.5 1,000 11 S11B-ZR-SM2-TF 15.0 18.0 1,000 5 1. 12 S12B-ZR-SM2-TF 16.5 19.5 1,000 φ1 13 S13B-ZR-SM2-TF 18.0 21.0 1,000 0.9 Material and Finish Pin: Brass, copper-undercoated, tin-plated (reflow treatment) Wafer: Glass-filled PA 46, UL94V-0, natural (ivory) RoHS2 compliance This product displays (LF)(SN) on a label. SM4 type SM4 type (with solder tabs) Top entry type No. of Model No. Dimensions (mm) Q’ty/reel circuits Top entry Side entry Top entry type Side entry type A B type type B 2 B2B-ZR-SM4-TF S2B-ZR-SM4A-TF 1.5 6.0 1,000 1,000 A 2.25 3 B3B-ZR-SM4-TF S3B-ZR-SM4A-TF 3.0 7.5 1,000 1,000 4 B4B-ZR-SM4-TF S4B-ZR-SM4A-TF 4.5 9.0 1,000 1,000 1.5 5 5 B5B-ZR-SM4-TF S5B-ZR-SM4A-TF 6.0 10.5 1,000 1,000 6 B6B-ZR-SM4-TF S6B-ZR-SM4A-TF 7.5 12.0 1,000 1,000 TSJH 3.7 7 B7B-ZR-SM4-TF S7B-ZR-SM4A-TF 9.0 13.5 1,000 1,000 8 B8B-ZR-SM4-TF S8B-ZR-SM4A-TF 10.5 15.0 1,000 1,000 5 1. 9 B9B-ZR-SM4-TF S9B-ZR-SM4A-TF 12.0 16.5 1,000 1,000 Circuit No.1 10 B10B-ZR-SM4-TF S10B-ZR-SM4A-TF 13.5 18.0 1,000 1,000 11 B11B-ZR-SM4-TF S11B-ZR-SM4A-TF 15.0 19.5 1,000 1,000 12 B12B-ZR-SM4-TF S12B-ZR-SM4A-TF 16.5 21.0 1,000 1,000 13 B13B-ZR-SM4-TF S13B-ZR-SM4A-TF 18.0 22.5 1,000 1,000 Material and Finish Side entry type Pin: Brass, copper-undercoated, tin-plated (reflow treatment) Wafer: PA 6T, UL94V-0, natural (ivory) Solder tab: Brass, copper-undercoated, tin-plated (reflow treatment) B RoHS2 compliance This product displays (LF)(SN) on a label. Note: 1. PA 9T is used for some colored products. A 2.25 5 1.5 2. The products listed above are supplied on embossed-tape. Circuit No.1 1.5 1 3. Contact JST for the top entry type headers with suction cap. <For reference> As the color identification, 7 the following alphabet shall be put in the underlined part. TSJH 3. For availability, delivery and minimum order quantity, contact JST. ex. S2B-ZR-SM4A-oo-TF- (blank)...natural (ivory) K...black R...red E...blue M...green L...lemon yellow LE...light blue DO...dark orange DH...dark gray 3