DATASHEET Common-mode Chokes RN series Current-compensated Chokes Rated currents from 0.3 to 10 A Approvals & Compliances DC to 400 Hz frequency 100 kHz to 3 MHz common-mode resonance frequency Dual-choke configurations Multiple PCB-mounting options RN chokes are attenuating common-mode or asymmetric (P/N –> E) interference signals, by being connected in series with the phase and neutral lines Performance indicators of an AC powerline input. Symmetrical components of the noise are also attenuated by the leakage inductance (stray inductance) of the windings. These chokes are typically used in conjunction with suppression capacitors. Features and benefits High saturation resistance and excellent thermal behavior Through hole pin connections Dual-choke configuration Technical specifications Small compact design Multiple housing options Operating voltage 300 VAC Custom-specific versions are available on request Operating frequency DC to 400 Hz Higher temperature versions Rated currents 0.3 to 10 A @ rated ambient temperature Fully potted design usable for ruggedized Rated inductance 0.4 to 100 mH applications Stray inductance Typically 1% of LN Inductance reduction (DC bias with IN) Less than 10% (25°C) Typical applications High potential test voltage winding-to- 1500 VAC, 60 sec, guaranteed winding @ 25°C 1500 VAC, 2 sec, factory test Switch-mode power applications winding-to-housing @ 25°C 4000 VAC, 60 sec, guaranteed Suppressing common-mode interference levels MTBF @ 40°C/230 V (Mil-HB-217F) >5,000,000 hours EMI input filters Surge current @ 10 msec 20 x IN@ 25°C For suppression-equipment with no earth Temperature range (operation and storage) -40°C to 100°C (40/100/56) connection acc. IEC 60068-1 Phase-angle control circuits in combination with Flammability corresponding to Potting compound UL 94V-0 Housing UL 94V-0 saturating chokes Ringcore coating UL 94V-0 Design corresponding to UL 1283, IEC/EN 60938-1 Typical electrical schematic

2 EMC/EMI Products Schaffner Group Datasheets 21 Oct 2020 Choke selection table Choke Buy Current @ ambient Inductance Resistance A B H Weight (lN) temperature (LN) (RDC) [A] [°C] [mH] [mOhm] [mm] [mm] [mm] (g) RN102-0.3-02-22M 0.3 40 22.0 1300 10.0 10.0 9.0 4 RN102-0.3-02-12M 0.3 40 12.0 1100 10.0 10.0 9.0 3 RN102-0.6-02-4M4 0.6 40 4.4 380 10.0 10.0 9.0 3 RN102-1-02-3M0 1.0 40 3.0 210 10.0 10.0 9.0 3 RN102-1.5-02-1M6 1.5 40 1.6 94 10.0 10.0 9.0 3 RN102-2-02-1M1 2.0 40 1.1 70 10.0 10.0 9.0 3 RN112-0.4-02-39M 0.4 40 39.0 1500 15.0 10.0 12.6 6 RN112-0.4-02-27M 0.4 40 27.0 1400 15.0 10.0 12.6 6 RN112-0.5-02-27M 0.5 40 27.0 1200 15.0 10.0 12.6 6 RN112-0.5-02-18M 0.5 40 18.0 1100 15.0 10.0 12.6 6 RN112-0.5-02-15M 0.5 40 15.0 700 15.0 10.0 12.6 6 RN112-0.6-02-15M 0.6 40 15.0 490 15.0 10.0 12.6 6 RN112-0.8-02-10M 0.8 40 10.0 380 15.0 10.0 12.6 6 RN112-1.2-02-6M8 1.2 40 6.8 250 15.0 10.0 12.6 6 RN112-1.5-02-3M3 1.5 40 3.3 102 15.0 10.0 12.6 6 RN112-2-02-1M8 2.0 40 1.8 74 15.0 10.0 12.6 6 RN112-2-02-1M0 2.0 40 1.0 70 15.0 10.0 12.6 6 RN112-2.6-02-0M4 2.6 40 0.4 40 15.0 10.0 12.6 6 RN112-3.6-02-0M4 3.6 40 0.4 27 15.0 10.0 12.6 6 RN112-4-02-0M7 4.0 40 0.7 24 15.0 10.0 12.6 6 RN114-0.3-02-47M 0.3 40 47.0 1700 20.1 12.5 13.2 10 RN114-0.5-02-39M 0.5 40 39.0 830 20.1 12.5 13.2 11 RN114-0.8-02-27M 0.8 40 27.0 500 20.1 12.5 13.2 11 RN114-1-02-15M 1.0 40 15.0 370 20.1 12.5 13.2 10 RN114-1.2-02-10M 1.2 40 10.0 195 20.1 12.5 13.2 10 RN114-1.5-02-6M8 1.5 40 6.8 123 20.1 12.5 13.2 11 RN114-2-02-4M2 2.0 40 4.2 100 20.1 12.5 13.2 11 RN114-2.5-02-3M3 2.5 40 3.3 72 20.1 12.5 13.2 11 RN114-3-02-2M0 3.0 40 2.0 52 20.1 12.5 13.2 10 RN114-4-02-1M5 4.0 40 1.5 34 20.1 12.5 13.2 11 RN116-0.5-02-47M 0.5 60 47.0 960 20.1 12.5 13.2 11 RN116-0.5-02-39M 0.5 60 39.0 920 20.1 12.5 13.2 11 RN116-0.5-02-27M 0.5 60 27.0 790 20.1 12.5 13.2 11 RN116-0.8-02-27M 0.8 60 27.0 370 20.1 12.5 13.2 13 RN116-1-02-15M 1.0 60 15.0 260 20.1 12.5 13.2 12 RN116-1-02-10M 1.0 60 10.0 210 20.1 12.5 13.2 11 RN116-1.3-02-6M8 1.3 60 6.8 140 20.1 12.5 13.2 12 RN116-1.5-02-10M 1.5 60 10.0 148 20.1 12.5 13.2 12 RN116-1.7-02-4M0 1.7 60 4.0 87 20.1 12.5 13.2 12 RN116-2-02-3M3 2.0 60 3.3 70 20.1 12.5 13.2 12 RN116-2-02-2M2 2.0 60 2.2 66 20.1 12.5 13.2 11 RN122-0.5-02-56M 0.5 40 56.0 1800 25.0 15.0 16.5 20 RN122-0.6-02-47M 0.6 40 47.0 1300 25.0 15.0 16.5 20 RN122-0.8-02-39M 0.8 40 39.0 1000 25.0 15.0 16.5 20 RN122-1-02-18M 1.0 40 18.0 630 25.0 15.0 16.5 19 RN122-1-02-10M 1.0 40 10.0 560 25.0 15.0 16.5 19 RN122-1.5-02-10M 1.5 40 10.0 250 25.0 15.0 16.5 20 RN122-2-02-6M8 2.0 40 6.8 156 25.0 15.0 16.5 20 RN122-2-02-5M0 2.0 40 5.0 140 25.0 15.0 16.5 21 RN122-2.5-02-5M6 2.5 40 5.6 110 25.0 15.0 16.5 20 RN122-3-02-4M5 3.0 40 4.5 80 25.0 15.0 16.5 21 RN122-4-02-3M3 4.0 40 3.3 46 25.0 15.0 16.5 22 RN122-4-02-1M8 4.0 40 1.8 42 25.0 15.0 16.5 22

3 EMC/EMI Products Schaffner Group Datasheets 21 Oct 2020 Choke Buy Current @ ambient Inductance Resistance A B H Weight (lN) temperature (LN) (RDC) [A] [°C] [mH] [mOhm] [mm] [mm] [mm] (g) RN142-0.5-02-82M 0.5 40 82.0 2700 30.0 20.0 19.7 36 RN142-1-02-33M 1.0 40 33.0 810 30.0 20.0 19.7 37 RN142-1.4-02-27M 1.4 40 27.0 500 30.0 20.0 19.7 40 RN142-2-02-6M8 2.0 40 6.8 192 30.0 20.0 19.7 36 RN142-4-02-3M3 4.0 40 3.3 67 30.0 20.0 19.7 38 RN142-6-02-1M8 6.0 40 1.8 20 30.0 20.0 19.7 40 RN143-0.5-02-100M 0.5 40 100.0 2900 30.0 20.0 19.7 36 RN143-1-02-47M 1.0 40 47.0 890 30.0 20.0 19.7 38 RN143-2-02-10M 2.0 40 10.0 240 30.0 20.0 19.7 42 RN143-4-02-3M9 4.0 40 3.9 59 30.0 20.0 19.7 39 RN143-6-02-1M8 6.0 40 1.8 20 30.0 20.0 19.7 42 RN152-1-02-68M 1.0 40 68.0 1300 40.0 15.0 25.0 75 RN152-2-02-18M 2.0 40 18.0 350 40.0 15.0 25.0 64 RN152-4-02-6M8 4.0 40 6.8 87 40.0 15.0 25.0 74 RN152-6-02-3M9 6.0 40 3.9 42 40.0 15.0 25.0 68 RN152-8-02-2M7 8.0 40 2.7 22 40.0 15.0 25.0 73 RN152-10-02-1M8 10.0 40 1.8 14 40.0 15.0 25.0 73 RN202-0.3-02-22M 0.3 40 22.0 1300 5.1 15.2 13.5 4 RN202-0.3-02-12M 0.3 40 12.0 1100 5.1 15.2 13.5 4 RN202-0.6-02-4M4 0.6 40 4.4 380 5.1 15.2 13.5 4 RN202-1-02-3M0 1.0 40 3.0 210 5.1 15.2 13.5 4 RN202-1.5-02-1M6 1.5 40 1.6 94 5.1 15.2 13.5 4 RN202-2-02-1M1 2.0 40 1.1 70 5.1 15.2 13.5 4 RN204-0.3-02-22M 0.3 40 22.0 1300 7.6 10.0 14.3 3 RN204-0.3-02-12M 0.3 40 12.0 960 7.6 10.0 14.3 3 RN204-0.6-02-4M4 0.6 40 4.4 350 7.6 10.0 14.3 3 RN204-1-02-3M0 1.0 40 3.0 192 7.6 10.0 14.3 3 RN204-1.5-02-1M6 1.5 40 1.6 96 7.6 10.0 14.3 3 RN204-2-02-1M1 2.0 40 1.1 57 7.6 10.0 14.3 3 RN212-0.4-02-39M 0.4 40 39.0 1500 10.0 15.0 20.0 8 RN212-0.4-02-27M 0.4 40 27.0 1400 10.0 15.0 20.0 8 RN212-0.5-02-27M 0.5 40 27.0 1200 10.0 15.0 20.0 8 RN212-0.5-02-18M 0.5 40 18.0 1100 10.0 15.0 20.0 8 RN212-0.5-02-15M 0.5 40 15.0 700 10.0 15.0 20.0 8 RN212-0.6-02-15M 0.6 40 15.0 490 10.0 15.0 20.0 8 RN212-0.8-02-10M 0.8 40 10.0 380 10.0 15.0 20.0 8 RN212-1.2-02-6M8 1.2 40 6.8 250 10.0 15.0 20.0 8 RN212-1.5-02-3M3 1.5 40 3.3 102 10.0 15.0 20.0 8 RN212-2-02-1M8 2.0 40 1.8 74 10.0 15.0 20.0 8 RN212-2-02-1M0 2.0 40 1.0 70 10.0 15.0 20.0 8 RN212-2.6-02-0M4 2.6 40 0.4 40 10.0 15.0 20.0 8 RN212-3.6-02-0M4 3.6 40 0.4 27 10.0 15.0 20.0 8 RN212-4-02-0M7 4.0 40 0.7 24 10.0 15.0 20.0 8 RN214-0.3-02-47M 0.3 40 47.0 1700 12.5 10.0 25.0 14 RN214-0.5-02-56M 0.5 40 56.0 1700 12.5 10.0 25.0 15 RN214-0.5-02-39M 0.5 40 39.0 830 12.5 10.0 25.0 14 RN214-0.8-02-27M 0.8 40 27.0 500 12.5 10.0 25.0 15 RN214-1-02-15M 1.0 40 15.0 370 12.5 10.0 25.0 14 RN214-1.2-02-10M 1.2 40 10.0 195 12.5 10.0 25.0 15 RN214-1.5-02-6M8 1.5 40 6.8 123 12.5 10.0 25.0 15 RN214-2-02-4M2 2.0 40 4.2 100 12.5 10.0 25.0 14

4 EMC/EMI Products Schaffner Group Datasheets 21 Oct 2020 Choke Buy Current @ ambient Inductance Resistance A B H Weight (lN) temperature (LN) (RDC) [A] [°C] [mH] [mOhm] [mm] [mm] [mm] (g) RN214-2-02-2M2 2.0 40 2.2 67 12.5 10.0 25.0 14 RN214-2.5-02-3M3 2.5 40 3.3 72 12.5 10.0 25.0 15 RN214-3-02-2M0 3.0 40 2.0 52 12.5 10.0 25.0 14 RN214-4-02-1M5 4.0 40 1.5 34 12.5 10.0 25.0 15 RN216-0.5-02-47M 0.5 60 47.0 960 12.5 10.0 25.0 15 RN216-0.5-02-39M 0.5 60 39.0 920 12.5 10.0 25.0 15 RN216-0.5-02-27M 0.5 60 27.0 790 12.5 10.0 25.0 15 RN216-0.8-02-27M 0.8 60 27.0 370 12.5 10.0 25.0 16 RN216-1-02-15M 1.0 60 15.0 260 12.5 10.0 25.0 16 RN216-1-02-10M 1.0 60 10.0 210 12.5 10.0 25.0 15 RN216-1.3-02-6M8 1.3 60 6.8 140 12.5 10.0 25.0 16 RN216-1.5-02-10M 1.5 60 10.0 148 12.5 10.0 25.0 16 RN216-1.7-02-4M0 1.7 60 4.0 87 12.5 10.0 25.0 16 RN216-2-02-3M3 2.0 60 3.3 70 12.5 10.0 25.0 16 RN216-2-02-2M2 2.0 60 2.2 66 12.5 10.0 25.0 15 RN218-0.4-02-100M 0.4 40 100 2800 10.0 12.5 20.0 8 RN218-0.6-02-47M 0.6 40 47.0 1200 10.0 12.5 20.0 8 RN218-0.7-02-39M 0.7 40 39.0 1150 10.0 12.5 20.0 8 RN218-0.9-02-27M 0.9 40 27.0 620 10.0 12.5 20.0 8 RN218-1-02-22M 1.0 40 22.0 520 10.0 12.5 20.0 8 RN218-1.1-02-15M 1.1 40 15.0 420 10.0 12.5 20.0 8 RN218-1.4-02-10M 1.4 40 10.0 330 10.0 12.5 20.0 8 RN218-1.7-02-6M8 1.7 40 6.8 180 10.0 12.5 20.0 8 RN218-2.2-02-3M3 2.2 40 3.3 100 10.0 12.5 20.0 8 RN222-0.5-02-56M 0.5 40 56.0 1800 15.0 12.5 29.3 27 RN222-0.6-02-47M 0.6 40 47.0 1300 15.0 12.5 29.3 26 RN222-0.8-02-39M 0.8 40 39.0 1000 15.0 12.5 29.3 27 RN222-1-02-33M 1.0 40 33.0 1300 15.0 12.5 29.3 29 RN222-1-02-18M 1.0 40 18.0 630 15.0 12.5 29.3 26 RN222-1.5-02-10M 1.5 40 10.0 250 15.0 12.5 29.3 26 RN222-2-02-6M8 2.0 40 6.8 156 15.0 12.5 29.3 28 RN222-2.5-02-5M6 2.5 40 5.6 110 15.0 12.5 29.3 27 RN222-3-02-4M5 3.0 40 4.5 80 15.0 12.5 29.3 28 RN222-4-02-3M3 4.0 40 3.3 46 15.0 12.5 29.3 28 RN232-0.6-02-47M 0.6 40 47.0 1300 15.0 12.5 34.3 37 RN232-1-02-18M 1.0 40 18.0 390 15.0 12.5 34.3 38 RN232-1.6-02-10M 1.6 40 10.0 170 15.0 12.5 34.3 38 RN232-2.5-02-5M6 2.5 40 5.6 86 15.0 12.5 34.3 38 RN232-4-02-3M3 4.0 40 3.3 54 15.0 12.5 34.3 38 RN242-0.5-02-82M 0.5 40 82.0 2700 15.0 12.5 34.3 37 RN242-1-02-33M 1.0 40 33.0 810 15.0 12.5 34.3 38 RN242-1.4-02-27M 1.4 40 27.0 500 15.0 12.5 34.3 38 RN242-2-02-6M8 2.0 40 6.8 192 15.0 12.5 34.3 37 RN242-4-02-3M3 4.0 40 3.3 67 15.0 12.5 34.3 38 RN242-6-02-1M8 6.0 40 1.8 20 15.0 12.5 34.3 41 Test conditions: Measuring frequency: 10 kHz; 50 mV; Inductance tolerance: +50%, -30%; Resistance tolerance: ±15% @ 25°C; Electrical characteristics @ 25°C: ±2°C; Stray Inductance measurement between pin 1 and 2 (pin 3 and 4 shorted) For mechanical tolerances refer to mechanical data section.

5 EMC/EMI Products Schaffner Group Datasheets 21 Oct 2020 Product selector Distribution inventory Up-to-date inventory levels for global distributors is available at https://products.schaffner.com/stock Thermal Derating If higher ambient temperatures than the specified apply, the nominal current needs to be reduced according to the graph below. Graph on the left side applies to RN with rated ambient temperature of 40 °C, right side for rated ambient temperature of 60 °C.

6 EMC/EMI Products Schaffner Group Datasheets 21 Oct 2020 Typical attenuation/resonance frequency characteristics Per CISPR 17; 50 Ω/50 Ω asym X can be exchanged with either 1 or 2 for different housing configuration, attenuation is similar RN 102, RN 202 RN 204 RN 112, RN 212 (<1 A) RN 112, RN 212 (>1 A) RN 114, RN 214 RN 116, RN 216

7 EMC/EMI Products Schaffner Group Datasheets 21 Oct 2020 RN 218 RN 122, RN 222 RN 232 RN 142, RN 242 RN 143 RN 152

8 EMC/EMI Products Schaffner Group Datasheets 21 Oct 2020 Mechanical data RN 102 RN 112, RN 114, RN 116, RN 122, RN 142/3 RN 152 A H A H A H B W P 24 31 B 13 42 W P 42 13 B 13 24 W P 24 13 L P L P L P RN 202 RN 204 RN 212, RN 218 A H A H A H 3 4 4 3 3 4 4 3 3 4 4 3 B 1 2 W P 2 1 B 1 2 W P 2 1 B 1 2 W P 2 1 L P L P L P RN 214, RN 216, RN 222, RN 232, RN 242 A H 3 4 4 3 B W 1 2 P 2 1 L P Pin material: Steel (base), Cu (under plating), Sn (final plating 6µm) Dimensions A B H L W P ØP (±0.6 mm) (±0.6 mm) (±0.3 mm) (±0.3 mm) (±0.3 mm) (±0.5 mm) (±0.1 mm) RN 102 10.0 mm 10.0 mm 9.0 mm 14.0 mm 14.0 mm 4.0 mm 0.6 mm RN 112 15.0 mm 10.0 mm 12.6 mm 17.7 mm 17.1 mm 4.0 mm 0.8 mm RN 114 20.1 mm 12.5 mm 13.2 mm 22.5 mm 21.5 mm 4.0 mm 0.8 mm RN 116 20.1 mm 12.5 mm 13.2 mm 22.5 mm 21.5 mm 4.0 mm 0.8 mm RN 122 25.0 mm 15.0 mm 16.5 mm 28.0 mm 27.0 mm 4.0 mm 0.8 mm RN 142 30.0 mm 20.0 mm 19.7 mm 33.1 mm 32.5 mm 4.3 mm 0.8 mm RN 143 30.0 mm 20.0 mm 19.7 mm 33.1 mm 32.5 mm 4.3 mm 0.8 mm RN 152 40.0 mm 15.0 mm 25.0 mm 43.0 mm 41.8 mm 4.5 mm 1.2 mm RN 202 5.1 mm 15.2 mm 13.5 mm 8.8 mm 18.2 mm 4.5 mm 0.8 mm RN 204 7.6 mm 10.0 mm 14.3 mm 9.0 mm 14.0 mm 4.0 mm 0.5 mm RN 212 10.0 mm 15.0 mm 20.0 mm 12.5 mm 18.0 mm 4.0 mm 0.8 mm RN 214 12.5 mm 10.0 mm 25.0 mm 15.5 mm 23.0 mm 4.0 mm 0.8 mm RN 216 12.5 mm 10.0 mm 25.0 mm 15.5 mm 23.0 mm 4.0 mm 0.8 mm RN 218 10.0 mm 12.5 mm 20.0 mm 12.5 mm 18.0 mm 4.0 mm 0.8 mm RN 222 15.0 mm 12.5 mm 29.3 mm 18.0 mm 31.0 mm 4.0 mm 0.8 mm RN 232 15.0 mm 12.5 mm 34.3 mm 18.0 mm 31.0 mm 4.2 mm 0.8 mm RN 242 15.0 mm 12.5 mm 34.3 mm 18.0 mm 31.0 mm 4.2 mm 0.8 mm Please visitwww.schaffner.comto find more details on filter connections.

9 EMC/EMI Products Schaffner Group Datasheets 21 Oct 2020 Headquarters, global Sales and application centers innovation and development Switzerland China Spain Schaffner Group Schaffner EMC Ltd. Shanghai Schaffner EMC España Industrie Nord T20-3 C, No 565 Chuangye Road, Calle Caléndula 93, Miniparc III, Edificio E Nordstrasse 11e Pudong district El Soto de Moraleja, Alcobendas 4542 Luterbach 201201 Shanghai 28109 Madrid T +41 32 681 66 26 T +86 21 3813 9500 T +34 917 912 900 info@schaffner.com cschina@schaffner.com F +34 917 912 901 www.schaffner.com.cn spainsales@schaffner.com Finland Sweden Schaffner Oy Schaffner EMC AB Sauvonrinne 19 H Östermalmstorg 1 08500 Lohja 114 42 Stockholm T +358 10 567 2855 T +46 8 5050 2425 finlandsales@schaffner.com swedensales@schaffner.com www.schaffner.com France Schaffner EMC S.A.S. Switzerland 16-20 Rue Louis Rameau Schaffner EMV AG 95875 Bezons Industrie Nord T +33 1 34 34 30 60 Nordstrasse 11e F +33 1 39 47 02 28 4542 Luterbach francesales@schaffner.com T +41 32 681 66 88 T +41 32 681 66 26 Germany switzerlandsales@schaffner.com Schaffner Deutschland GmbH Schoemperlenstrasse 12B Taiwan R.O.C. 76185 Karlsruhe Schaffner EMV Ltd. T +49 721 56910 20 Floor-2, No 97, Section 1, XinTai 5th Road F +49 721 569110 22175 XiZhi District New Taipei City 22175 germanysales@schaffner.com T +886 2 2697 5500 F +886 2 2697 5533 India taiwansales@schaffner.com Schaffner India Pvt. Ltd www.schaffner.com.tw REGUS WORLD TRADE CENTRE WTC, 22nd Floor Unit No 2238, Brigade Thailand Gateway Campus, 26/1, Dr. Rajkumar Road Schaffner EMC Co. Ltd. Malleshwaram (W) Northern Region Industrial Estate 560055 Bangalore 67 Moo 4 Tambon Ban Klang T +91 80 67935355 Amphur Muangg P.O. Box 14 indiasales@schaffner.com 51000 Lamphun T +66 53 58 11 04 Italy F +66 53 58 10 19 Schaffner EMC S.r.l. thailandsales@schaffner.com Via Ticino, 30 20900 Monza (MB) United Kingdom To find your local partner within Schaffner‘s T +39 039 21 41 070 Schaffner Ltd. global network:www.schaffner.com italysales@schaffner.com 1, Oakmede Place © 2020 Schaffner Group Japan Binfield RG42 4JF Berkshire Schaffner EMC K.K. The content of this document has been Taiju-Seimei Sangenjaya Bldg. T +44 118 9770070 carefullycheckedandunderstood.However, 1-32-12, Kamiuma, Setagaya-ku F +44 118 9792969 neitherSchaffnernoritssubsidiariesassume 154-0011 Tokyo uksales@schaffner.com any liability whatsoever for any errors or T +81 3 5712 3650 USA inaccuracies of this document and the F +81 3 5712 3651 Schaffner EMC Inc. consequences thereof. Published specifica- japansales@schaffner.com 52 Mayfield Avenue tions are subject to change without notice. www.schaffner.jp Edison, New Jersey Productsuitabilityforanyareaofapplication T +1 732 225 9533 must ultimately be determined by the Singapore F +1 732 225 4789 customer. In all cases, products must never Schaffner EMC Pte Ltd. usasales@schaffner.com be operated outside their published #05-09, Kg Ubi Ind. Estate www.schaffnerusa.com specifications. Schaffner does not guarantee 408705 Singapore theavailabilityofallpublishedproducts.This T +65 6377 3283 disclaimer shall be governed by substantive F +65 6377 3281 Swiss law and resulting disputes shall be singaporesales@schaffner.com settledbythecourtsattheplaceofbusiness of Schaffner Holding AG. Latest publications andacompletedisclaimercanbedownloa- ded from the Schaffner website. All trademarks recognized.