RClamp0504FA RailClamp®®®®® Low Capacitance TVS Array ®®®®® PROTECTION PRODUCTS - RailClamp Description Features RailClamp® low capacitance TVS array designed to (cid:139) Transient protection for high-speed data lines to protect high speed data interfaces. This series has IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact) been specifically designed to protect sensitive compo- IEC 61000-4-4 (EFT) 40A (5/50ns) nents which are connected to data and transmission (cid:139) Array of surge rated diodes with internal TVS Diode lines from overvoltage caused by ESD (electrostatic (cid:139) Small package (2.4 x 2.2mm) saves board space discharge), CDE (Cable Discharge Events), and EFT (cid:139) Protects up to four I/O lines & power line (electrical fast transients). (cid:139) Low capacitance (<3pF) for high-speed interfaces The unique design incorporates surge rated, low (cid:139) No insertion loss to 22222.....00000GGGGGHHHHHzzzzz capacitance steering diodes and a TVS diode in a (cid:139) Low leakage current and clamping voltage single package. This allows the device to absorb large (cid:139) Low operating voltage: 5.0V amounts of energy while protecting downstream (cid:139) Solid-state silicon-avalanche technology components from harmful transient events. The RClamp®0504FA is in a 6-pin, SC-70 package. The Mechanical Characteristics leads are finished with lead-free matte tin. They may (cid:139) EIAJ SC-70 6L package be used to meet the ESD immunity requirements of (cid:139) Lead Finish: Matte Tin IEC 61000-4-2, Level 4 (15kV air, 8kV contact dis- (cid:139) Pb-Free, Halogen Free, RoHS/WEEE Compliant charge). The combination of small size, low capaci- (cid:139) Molding compound flammability rating: UL 94V-0 tance, and high ESD surge capability makes them ideal (cid:139) Packaging : Tape and Reel for use in applications such as USB 2.0, multimedia card, and video interfaces. Applications (cid:139) USB 2.0 (cid:139) USB OTG (cid:139) Monitors and Flat Panel Displays (cid:139) Digital Visual Interface (DVI) (cid:139) SIM Ports (cid:139) IEEE 1394 Firewire Ports Circuit Diagram Schematic & PIN Configuration 1 6 5 1 3 4 6 2 5 3 4 2 SC-70 6L (Top View) Revision 4/15/2010 1 www.semtech.com

RClamp0504FA PROTECTION PRODUCTS Absolute Maximum Rating Rating Symbol Value Units PeakPulsePower(tp =8/20μs) P 150 Watts pk PeakPulseCurrent (tp =8/20μs) I 6 A PP ESDperIEC61000-4-2(Air) V 15 kV ESD ESDperIEC61000-4-2(Contact) 8 Operating Temperature T -55to+125 °C J StorageTemperature T -55to+150 °C STG Electrical Characteristics (T=25oC) Parameter Symbol Conditions Minimum Typical Maximum Units ReverseStand-Off Voltage V Pin 5to2 5 V RWM ReverseBreakdown Voltage V I =1mA 6 V BR t Pin 5to2 ReverseLeakageCurrent I V =5V, T=25°C 3 μA R RWM Pin 5to2 Clamping Voltage V I =1A, tp =8/20μs 15 V C PP Any pin topin 2 Clamping Voltage V I =6A, tp =8/20μs 25 V C PP Any pin topin 2 Junction Capacitance C V =0V, f =1MHz 3 pF j R Any I/Opin topin 2 V =0V, f =1MHz 1.5 pF R Between I/Opins Note 1: I/O pins are pin 1, 3, 4, and 6 © 2010 Semtech Corp. 2 www.semtech.com

RClamp0504FA PROTECTION PRODUCTS Typical Characteristics Non-Repetitive Peak Pulse Power vs. Pulse Time Power Derating Curve 10 110 100 W) 90 er - P (kPP 1 ower or IPP 678000 w P Po ed 50 k Pulse 0.1 % of Rat 3400 a e 20 P 10 0 0.01 0.1 1 10 100 1000 0 25 50 75 100 125 150 Pulse Duration - tp (μs) Ambient Temperature - TA (oC) Pulse Waveform Clamping Voltage vs. Peak Pulse Current 110 25 Waveform 100 Parameters: Waveform 90 tr = 8µs Parameters: of IPP 678000 e-t td = 20µs ge - V (V)C 20 tdtr == 280µµss oPr i6n t1o, p3,i n4 ,2 ent 50 olta 15 Perc 3400 td = IPP/2 mping V Pin 5 to pin 2 20 Cla 10 10 0 5 0 5 10 15 20 25 30 0 1 2 3 4 5 6 Peak Pulse Current - I (A) Time (µs) PP Forward Voltage vs. peak Pulse Current Capacitance vs. Reverse Voltage (Normalized to 0V) 2 8 f = 1MHz 7 e - V (V)F 56 acitance1.5 Any I/O Pin g p a a to Pin 2 ward Volt 34 Waveform malized C 1 For 2 Patrr a=m 8eµtesrs: Nor0.5 1 td = 20µs 0 0 1 2 3 4 5 6 0 0 1 2 3 4 5 Peak Pulse Current - I (A) PP Reverse Voltage - V (V) R © 2010 Semtech Corp. 3 www.semtech.com

RClamp0504FA PROTECTION PRODUCTS Typical Characteristics Insertion Loss S21 (I/O to Pin 2) Insertion Loss S21 (I/O to I/O) CH1 S21 LOG 6 dB / REF 0 dB CH1 S21 LOG 6 dB / REF 0 dB START . 030 MHz STOP 3 000. 0000 00 MHz START . 030 MHz STOP 3 000. 0000 00 MHz Analog Crosstalk ESD Response (8kV Contact per IEC 61000-4-2) CH1 S21 LOG 20 dB/ REF 0 dB START . 030 MHz STOP 3 000. 0000 00 MHz Note: Data is taken with a 10x attenuator © 2010 Semtech Corp. 4 www.semtech.com

RClamp0504FA PROTECTION PRODUCTS Applications Information Protection of Four Data Lines and Power Supply Line Device Connection Options for Protection of Four High-Speed Data Lines This device is designed to protect data lines by clamping them to a fixed reference. When the voltage on the protected line exceeds the reference voltage the steering diodes are forward biased, conducting the transient current away from the sensitive circuitry. Data lines are connected at pins 1, 3, 4 and 6. Pin 2 should be connected directly to a ground plane. The path length is kept as short as possible to minimize parasitic inductance. The positive reference is connected at pin 5. The options for connecting the positive reference are as follows: Protection of Four Data Lines Using Internal TVS 1. To protect data lines and the power line, connect Diode as Reference pin 5 directly to the positive supply rail (V ). In this CC configuration the data lines are referenced to the supply voltage. The internal TVS diode prevents over-voltage on the supply rail. 2. In applications where the supply rail does not exit the system, the internal TVS may be used as the reference. In this case, pin 5 is not connected. The steering diodes will begin to conduct when the voltage on the protected line exceeds the working voltage of the TVS (plus one diode drop). 3. In applications where complete supply isolation is desired, the internal TVS is again used as the reference and V is connected to one of the I/O CC inputs. An example of this configuration is the protection of a SIM port. The Clock, Reset, I/O, and VCC lines are connected at pins 1, 3, 4, and 6. Pin 2 is connected to ground and pin 5 is not connected. Matte Tin Lead Finish Matte tin has become the industry standard lead-free replacement for SnPb lead finishes. A matte tin finish is composed of 100% tin solder with large grains. Since the solder volume on the leads is small com- pared to the solder paste volume that is placed on the land pattern of the PCB, the reflow profile will be determined by the requirements of the solder paste. Therefore, these devices are compatible with both lead-free and SnPb assembly techniques. In addition, unlike other lead-free compositions, matte tin does not have any added alloys that can cause degradation of the solder joint. © 2010 Semtech Corp. 5 www.semtech.com

RClamp0504FA PROTECTION PRODUCTS Typical Applications SIM Port - Protection of Three Data Lines and VCC UUSSBB OOTTGG RReecceeppttaabbllee CCaarrkkiitt VVBBuuss DD -- TToo DD ++ PPhhoonnee IIDD MMiinnii BB RReecceeppttaabbllee GGNNDD SShhiieelldd GGnndd 11 66 22 55 33 44 MMiinnii AA RReecceeppttaabbllee USB OTG Carkit Protection © 2010 Semtech Corp. 6 www.semtech.com

RClamp0504FA PROTECTION PRODUCTS Typical Applications SD12 RClamp0504FA IEEE 1394 Firewire Protection © 2010 Semtech Corp. 7 www.semtech.com

RClamp0504FA PROTECTION PRODUCTS Outline Drawing - SC70-6L DIMENSIONS A INCHES MILLIMETERS DIM e1 D MINNOMMAX MINNOMMAX N A - - .043 - - 1.10 A1 .000 - .004 0.00 - 0.10 A2 .028 .035 .039 0.70 0.90 1.00 E/2 b .006 - .012 0.15 - 0.30 E c .003 - .009 0.08 - 0.22 E1 D .071 .079 .087 1.80 2.00 2.20 E1 .045 .049 .053 1.15 1.25 1.35 E .083 BSC 2.10 BSC e .026 BSC 0.65 BSC ccc C 1 2 e1 .051 1.30 BSC L .010 .014 .018 0.26 0.36 0.46 2X N/2 TIPS e L1 (.017) (0.42) N 6 6 B 01 0° - 8° 0° - 8° aaa .004 0.10 D bbb .004 0.10 ccc .012 0.30 aaa C A2 A SEATING PLANE C A1 H bxN bbb C A-B D GAGE c PLANE 0.15 L 01 (L1) DETAILA SEE DETAILA SIDE VIEW NOTES: 1. CONTROLLING DIMENSIONS ARE IN MILLIMETERS (ANGLES IN DEGREES). 2. DATUMS - A - AND - B - TO BE DETERMINED AT DATUM PLANE -H- 3. DIMENSIONS "E1" AND "D" DO NOT INCLUDE MOLD FLASH, PROTRUSIONS OR GATE BURRS. 4. REFERENCE JEDEC STD MO-203, VARIATION AB. Land Pattern - SC70-6L X DDIIMMEENNSSIIOONNSS DDIIMM IINNCCHHEESS MMIILLLLIIMMEETTEERRSS CC (.073) (1.85) GG .039 1.00 C G Z PP .026 0.65 XX .016 0.40 Y YY .033 0.85 ZZ .106 2.70 P NOTES: 1. THIS LAND PATTERN IS FOR REFERENCE PURPOSES ONLY. CONSULT YOUR MANUFACTURING GROUP TO ENSURE YOUR COMPANY'S MANUFACTURING GUIDELINES ARE MET. © 2010 Semtech Corp. 8 www.semtech.com

RClamp0504FA PROTECTION PRODUCTS Marking Ordering Information Qtyper Reel Part Number Reel Size 0504F RClamp0504FATCT 3,000 7Inch YYWW RailClamp and RClamp are trademarks of Semtech Corporation Note: YYWW = Date Code Tape and Reel Specification 0504F 0504F 0504F 0504F 0504F 0504F 0504F 0504F YYWW YYWW YYWW YYWW YYWW YYWW YYWW YYWW Device Orientation in Tape A0 B0 K0 2.40+/-0.15mm 2.40+/-0.15mm 1.20+/-0.15mm Tape K B,(Max) D D1 E F P P0 P2 T(MAX) W Width (MAX) 8.0mm 0.5mm 1.750±.10 1.5+0.1mm 3.5±0.05 4.0±0.1 4.0±0.1 2.0±0.05 +0.3mm 8mm 4.2mm ±0.05 mm 2.4mm 0.4mm -0.0mm) mm mm mm mm -0.1mm Contact Information Semtech Corporation Protection Products Division 200 Flynn Rd., Camarillo, CA 93012 Phone: (805)498-2111 FAX (805)498-3804 © 2010 Semtech Corp. 9 www.semtech.com