P6SMB Series www.vishay.com Vishay General Semiconductor Surface Mount TRANSZORB® Transient Voltage Suppressors FEATURES • Low profile package • Ideal for automated placement • Glass passivated chip junction • Available in uni-directional and bi-directional • 600 W peak pulse power capability with a Available 10/1000 μs waveform, repetitive rate (duty cycle): 0.01 % • Excellent clamping capability • Very fast response time • Low incremental surge resistance SMB (DO-214AA) • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C • AEC-Q101 qualified available - Automotive ordering code: base P/NHE3 or P/NHM3 • Material categorization: for definitions of complianc e PRIMARY CHARACTERISTICS please see www.vishay.com/doc?99912 V (uni-directional) 5.8 V to 459 V WM TYPICAL APPLICATIONS V (bi-directional) 5.8 V to 185 V WM Use in sensitive electronics protection against voltage V (uni-directional) 6.8 V to 540 V BR transients induced by inductive load switching and lightin g VBR (bi-directional) 6.8 V to 220 V on ICs, MOSFET, signal lines of sensor units for consumer, P 600 W computer, industrial, and telecommunication. PPM P 5.0 W D MECHANICAL DATA I (uni-directional only) 100 A FSM Case: SMB (DO-214AA) TJ max. 150 °C Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS-compliant, commercial grade Polarity Uni-directional, bi-directional Base P/N-M3 - halogen-free, RoHS-compliant, commercial Package SMB (DO-214AA) grade Base P/NHE3_X - RoHS-compliant and AEC-Q101 qualified Base P/NHM3_X - halogen-free, RoHS-compliant, and AEC-Q101 qualified (“_X” denotes revision code e.g. A, B, ...) DEVICES FOR BI-DIRECTION APPLICATIONS Terminals: matte tin plated leads, solderable per For bi-directional devices use CA suffix (e.g. P6SMB10CA). J-STD-002 and JESD 22-B102 Electrical characteristics apply in both directions. E3, M3, HE3, and HM3 suffix meets JESD 201 class 2 whisker test Polarity: for uni-directional types the band denotes cathod e end, no marking on bi-directional types MAXIMUM RATINGS (T = 25 °C unless otherwise noted) A PARAMETER SYMBOL VALUE UNIT Peak power dissipation with a 10/1000 μs waveform (1)(2) (fig. 1) P 600 W PPM Peak pulse current with a 10/1000 μs waveform (1) I See next table A PPM Power dissipation on infinite heatsink at T = 50 °C P 5.0 W A D Peak forward surge current 8.3 ms single half sine-wave uni-directional only (2) I 100 A FSM Operating junction and storage temperature range T , T -65 to +150 °C J STG Notes (1) Non-repetitive current pulse, per fig. 3 and derated above T = 25 °C per fig. 2 A (2) Mounted on 0.2" x 0.2" (5.0 mm x 5.0 mm) copper pads to each terminal Revision: 03-May-2019 1 Document Number: 88370 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

P6SMB Series www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (T = 25 °C unless otherwise noted) A BREAKDOWN MAXIMUM MAXIMUM DEVICE MAXIMUM MAXIMUM VOLTAGE TEST STAND-OFF REVERSE PEAK MARKING CLAMPING TEMPERATURE PART CODE VBR AT IT (1) CURRENT VOLTAGE LEAKAGE PULSE VOLTAGE COEFFICIENT NUMBER (V) I V AT V CURRENT T WM WM AT I OF V (mA) (V) I (3) I (2) PPM BR UNI BI MIN. MAX. (DμA) PP(MA ) VC (V) (%/°C) P6SMB6.8A 6V8A 6V8C 6.45 7.14 10 5.80 1000 57.1 10.5 0.057 P6SMB7.5A 7V5A 7V5C 7.13 7.88 10 6.40 500 53.1 11.3 0.061 P6SMB8.2A 8V2A 8V2C 7.79 8.61 10 7.02 200 49.6 12.1 0.065 P6SMB9.1A 9V1A 9V1C 8.65 9.55 1.0 7.78 50 44.8 13.4 0.068 P6SMB10A 10A 10C 9.50 10.5 1.0 8.55 10 41.4 14.5 0.073 P6SMB11A 11A 11C 10.5 11.6 1.0 9.40 5.0 38.5 15.6 0.075 P6SMB12A 12A 12C 11.4 12.6 1.0 10.2 5.0 35.9 16.7 0.078 P6SMB13A 13A 13C 12.4 13.7 1.0 11.1 5.0 33.0 18.2 0.081 P6SMB15A 15A 15C 14.3 15.8 1.0 12.8 1.0 28.3 21.2 0.084 P6SMB16A 16A 16C 15.2 16.8 1.0 13.6 1.0 26.7 22.5 0.086 P6SMB18A 18A 18C 17.1 18.9 1.0 15.3 1.0 23.8 25.2 0.088 P6SMB20A 20A 20C 19.0 21.0 1.0 17.1 1.0 21.7 27.7 0.090 P6SMB22A 22A 22C 20.9 23.1 1.0 18.8 1.0 19.6 30.6 0.092 P6SMB24A 24A 24C 22.8 25.2 1.0 20.5 1.0 18.1 33.2 0.094 P6SMB27A 27A 27C 25.7 28.4 1.0 23.1 1.0 16.0 37.5 0.096 P6SMB30A 30A 30C 28.5 31.5 1.0 25.6 1.0 14.5 41.4 0.097 P6SMB33A 33A 33C 31.4 34.7 1.0 28.2 1.0 13.1 45.7 0.098 P6SMB36A 36A 36C 34.2 37.8 1.0 30.8 1.0 12.0 49.9 0.099 P6SMB39A 39A 39C 37.1 41.0 1.0 33.3 1.0 11.1 53.9 0.100 P6SMB43A 43A 43C 40.9 45.2 1.0 36.8 1.0 10.1 59.3 0.101 P6SMB47A 47A 47C 44.7 49.4 1.0 40.2 1.0 9.3 64.8 0.101 P6SMB51A 51A 51C 48.5 53.6 1.0 43.6 1.0 8.6 70.1 0.102 P6SMB56A 56A 56C 53.2 58.8 1.0 47.8 1.0 7.8 77.0 0.103 P6SMB62A 62A 62C 58.9 65.1 1.0 53.0 1.0 7.1 85.0 0.104 P6SMB68A 68A 68C 64.6 71.4 1.0 58.1 1.0 6.5 92.0 0.104 P6SMB75A 75A 75C 71.3 78.8 1.0 64.1 1.0 5.8 103 0.105 P6SMB82A 82A 82C 77.9 86.1 1.0 70.1 1.0 5.3 113 0.105 P6SMB91A 91A 91C 86.5 95.5 1.0 77.8 1.0 4.8 125 0.106 P6SMB100A 100A 100C 95.0 105 1.0 85.5 1.0 4.4 137 0.106 P6SMB110A 110A 110C 105 116 1.0 94.0 1.0 3.9 152 0.107 P6SMB120A 120A 120C 114 126 1.0 102 1.0 3.6 165 0.107 P6SMB130A 130A 130C 124 137 1.0 111 1.0 3.4 179 0.107 P6SMB150A 150A 150C 143 158 1.0 128 1.0 2.9 207 0.108 P6SMB160A 160A 160C 152 168 1.0 136 1.0 2.7 219 0.108 P6SMB170A 170A 170C 162 179 1.0 145 1.0 2.6 234 0.108 P6SMB180A 180A 180C 171 189 1.0 154 1.0 2.4 246 0.108 P6SMB200A 200A 200C 190 210 1.0 171 1.0 2.2 274 0.108 P6SMB220A 220A 220C 209 231 1.0 185 1.0 1.8 328 0.108 P6SMB250A 250A - 237 263 1.0 214 1.0 1.74 344 0.110 P6SMB300A 300A - 285 315 1.0 256 1.0 1.45 414 0.110 P6SMB350A 350A - 333 368 1.0 300 1.0 1.24 482 0.110 P6SMB400A 400A - 380 420 1.0 342 1.0 1.10 548 0.110 P6SMB440A 440A - 418 462 1.0 376 1.0 1.00 602 0.110 P6SMB480A 480A - 456 504 1.0 408 1.0 0.91 658 0.110 P6SMB510A 510A - 485 535 1.0 434 1.0 0.86 698 0.110 P6SMB540A 540A - 513 567 1.0 459 1.0 0.81 740 0.110 Notes (1) Pulse test: tp  50 ms (2) Surge current waveform per fig. 3 and derate per fig. 2 (3) For bi-directional types with V of 10 V and less, the I limit is doubled WM D (4) All terms and symbols are consistent with ANSI/IEEE CA62.35 (5) V = 3.5 V at I = 50 A (uni-directional only) F F Revision: 03-May-2019 2 Document Number: 88370 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

P6SMB Series www.vishay.com Vishay General Semiconductor THERMAL CHARACTERISTICS (T = 25 °C unless otherwise noted) A PARAMETER SYMBOL VALUE UNIT Typical thermal resistance, junction to ambient air (1) R 100 JA °C/ W Typical thermal resistance, junction to lead R 20 JL Note (1) Mounted on minimum recommended pad layout ORDERING INFORMATION (Example) UNIT VOLTAGE RANGE PREFERRED P/N WEIGHT (V) PACKAGE BASE DELIVERY MODE CODE QUANTITY (g) UNI - BI - P6SMB6.8A-E3/52 0.096 6.8 to 220 6.8 to 220 52 750 7" diameter plastic tape and reel P6SMB6.8A-M3/52 0.096 6.8 to 540 6.8 to 220 52 750 7" diameter plastic tape and reel P6SMB6.8A-E3/5B 0.096 6.8 to 220 6.8 to 220 5B 3200 13" diameter plastic tape and reel P6SMB6.8A-M3/5B 0.096 6.8 to 540 6.8 to 220 5B 3200 13" diameter plastic tape and reel P6SMB6.8AHE3_A/H (1) 0.096 6.8 to 220 6.8 to 220 H 750 7" diameter plastic tape and reel P6SMB6.8AHM3_A/H (1) P6SMB6.8AHE3_A/I (1) 0.096 6.8 to 220 6.8 to 220 I 3200 13" diameter plastic tape and reel P6SMB6.8AHM3_A/I (1) P6SMB250AHM3_C/H (2) 0.096 250 to 540 - H 750 7" diameter plastic tape and reel P6SMB250AHM3_C/I (2) 0.096 250 to 540 - I 3200 13" diameter plastic tape and reel Notes (1) _A is available for P6SMB6.8(C)A to P6SMB220(C)A, AEC-Q101 qualified (2) _C is available for P6SMB250A to P6SMB540A, AEC-Q101 qualified RATINGS AND CHARACTERISTICS CURVES (T = 25 °C unless otherwise noted) A 100 100 )P P )W I( tn k e% ( rewoP esluP kaeP - PMPP 101 0C.o2p xp e0r. 2P"a (d5 .A0 rxe a5s.0 mm) rruC ro )P( rewoP esluP kPP ,egatnecreP ni gnitareD 752505 a e 0.1 P 0 0.1 µs 1.0 µs 10 µs 100 µs 1.0 ms 10 ms 0 25 50 75 100 125 150 175 200 td - Pulse Width (s) TJ - Initial Temperature (°C) Fig. 1 - Peak Pulse Power Rating Curve Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature Revision: 03-May-2019 3 Document Number: 88370 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

P6SMB Series www.vishay.com Vishay General Semiconductor 150 100 I %MSR tr =P e1a0k µ Vsalue iwTPsJu h dl=ese re2fei n5 Wte h°ideCd taPhse ( atthdk)e C Puorirnetnt )W/C°( e ,tnerru 100 IPPM decays to 50 % of IPPM cnadep 10 C m eslu HIPaPMlf Value - I2PP I lam P kaeP - M 50 1a0s /d1e0f0in0e µds b Wy aRv.eEf.oAr.m rehT tneis 1.0 P n P a I td rT 0 0.1 0 1.0 2.0 3.0 4.0 0.001 0.01 0.1 1 10 100 1000 t - Time (ms) tp - Pulse Duration (s) Fig. 3 - Pulse Waveform Fig. 5 - Typical Transient Thermal Impedance 6000 200 Measured at 8.3 ms Single Half Sine-Wave apacitance (pF)1000 Zero Bias urge Current (A) 100 Uni-Directional Only C S ction 100 SVRta, nMde-Oasffu Vreodlta agte VWM ward C - JunJ UBin-Di-Direircetciotinoanlal Tf =J =1 .205 M °CHz Peak For V = 50 mVp-p sig 10 10 1 10 100 200 1 10 100 VWM - Reverse Stand-Off Voltage (V) Number of Cycles at 60 Hz Fig. 4 - Typical Junction Capacitance Fig. 6 - Maximum Non-Repetitive Peak Forward Surge Current PACKAGE OUTLINE DIMENSIONS in inches (millimeters) SMB (DO-214AA) Cathode Band Mounting Pad Layout 0.085 (2.159) 0.086 (2.20) 0.155 (3.94) MAX. 0.077 (1.95) 0.130 (3.30) 0.086 (2.18) 0.180 (4.57) MIN. 0.160 (4.06) 0.012 (0.305) 0.006 (0.152) 0.096 (2.44) 0.084 (2.13) 0.060 (1.52) MIN. 0.060 (1.52) 0.008 0.030 (0.76) (0.203) 0.220 REF. Max. 0.220 (5.59) 0.205 (5.21) Revision: 03-May-2019 4 Document Number: 88370 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROV E RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose o r the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustainin g applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk . Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this documen t or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2019 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2019 1 Document Number: 91000

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: V ishay: P6SMB180A/52 P6SMB180A/55 P6SMB180A/5B P6SMB180A-E3/51 P6SMB180A-E3/55 P6SMB180AHE3/55 P6SMB18A/52 P6SMB18A/55 P6SMB18A/5B P6SMB18A-E3/5 P6SMB18A-E3/55 P6SMB200A/2B P6SMB200A/52 P6SMB200A/55 P6SMB200A/5B P6SMB200A-E3/2C P6SMB200A-E3/55 P6SMB200AHE3/2C P6SMB200AHE3/55 P6SMB200CA/52 P6SMB200CA/55 P6SMB200CA-E3/51 P6SMB200CA-E3/55 P6SMB20A/52 P6SMB20CA/52 P6SMB20CA/5B P6SMB20CA-E3/51 P6SMB20CA-E3/55 P6SMB20CAHE3/55 P6SMB220A/55 P6SMB220A/5B P6SMB220A-E3/55 P6SMB220AHE3/55 P6SMB220CA/5B P6SMB220CA-E3/55 P6SMB220CAHE3/55 P6SMB22A/52 P6SMB22CA/5 P6SMB22CA-E3/55 P6SMB22CAHE3/55 P6SMB24CA/5B P6SMB24CA-E3/55 P6SMB24CAHE3/2C P6SMB27A/52 P6SMB27A/55 P6SMB27A-E3/55 P6SMB27CA/5B P6SMB27CA-E3/55 P6SMB27CAHE3/2C P6SMB27CAHE3/55 P6SMB300AHE3/55 P6SMB30CA/2 P6SMB30CA- E3/55 P6SMB33A/52 P6SMB33A/5B P6SMB33CA-E3/55 P6SMB350A/51 P6SMB350A/5B P6SMB350A-E3/51 P6SMB350A-E3/55 P6SMB36A/5B P6SMB36AHE3/55 P6SMB36CA/5 P6SMB36CAHE3/55 P6SMB39A/55 P6SMB39A/5B P6SMB43A/52 P6SMB43A/5B P6SMB43AHE3/55 P6SMB43CA/55 P6SMB43CA-E3/55 P6SMB43CAHE3/55 P6SMB47A-E3/55 P6SMB47CA/5 P6SMB47CA/55 P6SMB480A/52 P6SMB480A/55 P6SMB480A/5B P6SMB480A-E3/55 P6SMB480AHE3/55 P6SMB510A/55 P6SMB510A/5B P6SMB510A-E3/55 P6SMB51CA/2 P6SMB51CA/52 P6SMB51CA/55 P6SMB51CA/5B P6SMB51CA-E3/55 P6SMB540A/52 P6SMB56A/5B P6SMB56A-E3/55 P6SMB56AHE3/55 P6SMB56CA/2 P6SMB56CA/5 P6SMB56CA/55 P6SMB56CA/5B P6SMB56CA-E3/55 P6SMB6.8A/5 P6SMB6.8A/55 P6SMB6.8A/5B