P6KE6.8 THRU P6KE440CA Breakdown Voltage:6.8-440 Volts Peak Pulse P ower:600 Watts GLASS PASSIVAED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR Features DO-15  600w peak pulse power capability  Excellent clamping capability  Low incremental surge resistance 1.0(25.4)  Fast response time:typically less than 1.0ps from 0v to MIN. VBR for unidirectional and 5.0ns ror bidirectional types. 0.140 (3.6)  High temperature soldering guaranteed: 0.104(2.6) DIA. 265°C/10S/9.5mm lead length at 5 lbs tension 0.300(7.6) 0.230(5.8) Mechanical Data 1.0 (25.4) MIN. 0.034 (0.86) Case : JEDEC DO-15 Molded plastic body 0.028 (0.70) DIA. Terminals : Solder plated, solderable per MIL-STD-750,Method 2026 Polarity : Polarity symbol marking on body Mounting Position : Any Weight : 0.014 ounce, 0.40 grams Dimensions in inches and (millimeters) Maximum Ratings And Electrical Characteristics Ratings at 25°C ambient temperature unlss otherwise specified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%. SYMBOLS VALUE UNITS Peak power disssiippaattiioonn Pppm Minimum 600 W peak power dissipation (Note 1) Ippm See Table 1 A Steady state power dissapation (Note 2) PM(AV) 5.0 W Peak forward surPeak forward surge current(Note 3) IFSM 100 A Maximum instantaneous forward voltage at 50A VF 3.5/5.0 V for unidirectional only (Note 4) Operating junction and storage temperature range TSTG,TJ -55 to + 175 C Notes: 1.10/1000m s waveform non-repetitive current pulse,per Fig.3 and derated above Ta=25 C per Fig.2 2.TL=75 C,lead lengths 9.5mm,Mounted on copper pad atea of (40x40mm)Fig.5 3.Measured on 8.3ms single half sine-wave or equivalent square wave,duty cycle=4 pulses per minute maximum. 4.VF=3.5V max.for devices of V(BR)<200V,and VF=5.0V max.for devices of V(BR)>200V DN:T20525A0 http://www.microdiode.com Rev:2020A0 Page :1

P6KE6.8 THRU P6KE440CA Breakdown Voltage:6.8-440 Volts Peak Pulse P ower:600 Watts ELECTRICAL CHARACTERISTICS (at TA=25°C unless otherwise noted) Breakdown Voltage Maximum Maximum Maximum Maximum V(BR) Test Stand-off Reverse Peak Pulse Clamping Temperature Device Type (Volts)(NOTES 1) Current Voltage Leakage Reverse Current Voltage at Coefficient IT(mA) VWM atVWM IPPM(NOTE2) IPPM of V(BR) MIN MAX (Volts) ID(NOTE3)(mA) (Amps) Vc(Volts) (%/ C) P6KE6.8 6.12 7.48 10.0 5.50 1000.0 55.6 10.8 0.057 P6KE6.8A 6.45 7.14 10.0 5.80 1000.0 57.1 10.5 0.057 P6KE7.5 6.75 8.25 1.0 6.05 500.0 51.3 11.7 0.061 P6KE7.5A 7.13 7.88 1.0 6.40 500.0 53.1 11.3 0.061 P6KE8.2 7.38 9.02 1.0 6.63 200.0 48.0 12.5 0.065 P6KE8.2A 7.79 8.61 1.0 7.02 200.0 49.6 12.1 0.065 P6KE9.1 8.19 10.0 1.0 7.37 50.0 43.5 13.8 0.068 P6KE9.1A 8.65 9.55 1.0 7.78 50.0 44.8 13.4 0.068 P6KE10 9.00 11.0 1.0 8.10 10.0 40.0 15.0 0.073 P6KE10A 9.50 10.5 1.0 8.55 10.0 41.4 14.5 0.073 P6KE11 9.90 12.1 1.0 8.92 5.0 37.0 16.2 0.075 P6KE11A 10.5 11.6 1.0 9.40 5.0 38.5 15.6 0.075 P6KE12 10.8 13.2 1.0 9.72 5.0 34.7 17.3 0.078 P6KE12A 11.4 12.6 1.0 10.2 5.0 35.9 16.7 0.078 P6KE13 11.7 14.3 1.0 10.5 5.0 31.6 19.0 0.081 P6KE13A 12.4 13.7 1.0 11.1 5.0 33.0 18.2 0.081 P6KE15 13.5 16.5 1.0 12.1 5.0 27.3 22.0 0.084 P6KE15A 14.3 15.8 1.0 12.8 5.0 28.3 21.2 0.084 P6KE16 14.4 17.6 1.0 12.9 5.0 25.5 23.5 0.086 P6KE16A 15.2 16.8 1.0 13.6 5.0 26.7 22.5 0.086 P6KE18 16.2 19.8 1.0 14.5 5.0 22.6 26.5 0.088 P6KE18A 17.1 18.9 1.0 15.3 5.0 23.8 25.2 0.088 P6KE20 18.0 22.0 1.0 16.2 5.0 20.6 29.1 0.090 P6KE20A 19.0 21.0 1.0 17.1 5.0 21.7 27.7 0.090 P6KE22 19.8 24.2 1.0 17.8 5.0 18.8 31.9 0.092 P6KE22A 20.9 23.1 1.0 18.8 5.0 19.6 30.6 0.092 P6KE24 21.6 26.4 1.0 19.4 5.0 17.3 34.7 0.094 P6KE24A 22.8 25.2 1.0 20.5 5.0 18.1 33.2 0.094 P6KE27 24.3 29.7 1.0 21.8 5.0 15.3 39.1 0.096 P6KE27A 25.7 28.4 1.0 23.1 5.0 16.0 37.5 0.096 P6KE30 27.0 33.0 1.0 24.3 5.0 13.8 43.5 0.097 P6KE30A 28.5 31.5 1.0 25.6 50. 14.5 41.4 0.097 P6KE33 29.7 36.3 1.0 26.8 5.0 12.6 47.7 0.098 P6KE33A 31.4 34.7 1.0 28.2 5.0 13.1 45.7 0.098 P6KE36 32.4 39.6 1.0 29.1 5.0 11.5 52.0 0.099 P6KE36A 34.2 37.8 1.0 30.8 5.0 12.0 49.9 0.099 P6KE39 35.1 42.9 1.0 31.6 5.0 10.6 56.4 0.100 P6KE39A 37.1 41.0 1.0 33.3 5.0 11.1 53.9 0.100 P6KE43 38.7 47.3 1.0 34.8 5.0 9.7 61.9 0.101 P6KE43A 40.9 45.2 1.0 36.8 5.0 10.1 59.3 0.101 P6KE47 42.3 51.7 1.0 38.1 5.0 8.8 67.8 0.101 P6KE47A 44.7 49.4 1.0 40.2 5.0 9.3 64.8 0.101 P6KE51 45.9 56.1 1.0 41.3 5.0 8.2 73.5 0.102 P6KE51A 48.5 53.6 1.0 43.6 5.0 8.6 70.1 0.102 P6KE56 50.4 61.6 1.0 45.4 5.0 7.5 80.5 0.103 P6KE56A 53.2 58.8 1.0 47.8 5.0 7.8 77.0 0.103 The electrical characteristics above is for reference only. http://www.microdiode.com Rev:2020A0 Page :2

P6KE6.8 THRU P6KE440CA Breakdown Voltage:6.8-440 Volts Peak Pulse P ower:600 Watts ELECTRICAL CHARACTERISTICS (at TA=25°C unless otherwise noted) Breakdown Voltage Maximum Maximum Maximum Maximum V(BR) Test Stand-off Reverse Peak Pulse Clamping Temperature Device Type (Volts)(NOTES 1) Current Voltage Leakage Reverse Current Voltage at Coefficient IT(mA) VWM atVWM IPPM(NOTE2) IPPM of V(BR) MIN MAX (Volts) ID(NOTE3)(mA) (Amps) Vc(Volts) (%/ C) P6KE62 55.8 68.2 1.0 50.2 5.0 6.7 89.0 0.104 P6KE62A 58.9 65.1 1.0 53.0 5.0 7.1 85.0 0.104 P6KE68 61.2 74.8 1.0 55.1 5.0 6.1 98.0 0.104 P6KE68A 64.6 71.4 1.0 58.1 5.0 6.5 92.0 0.104 P6KE75 67.5 82.5 1.0 60.7 5.0 5.6 108 0.105 P6KE75A 71.3 78.8 1.0 64.1 5.0 5.8 103 0.105 P6KE82 73.8 90.2 1.0 66.4 5.0 5.1 118 0.105 P6KE82A 77.9 86.1 1.0 70.1 5.0 5.3 113 0.105 P6KE91 81.9 100 1.0 73.7 5.0 4.6 131 0.106 P6KE91A 86.5 95.5 1.0 77.8 5.0 4.8 125 0.106 P6KE100 90.0 110 1.0 81.0 5.0 4.2 144 0.106 P6KE100A 95.0 105 1.0 85.5 5.0 4.4 137 0.106 P6KE110 99.0 121 1.0 89.2 5.0 3.8 158 0.107 P6KE110A 105 116 1.0 94.0 5.0 3.9 152 0.107 P6KE120 108 132 1.0 97.2 5.0 3.5 173 0.107 P6KE120A 114 126 1.0 102 5.0 3.6 165 0.107 P6KE130 117 143 1.0 105 5.0 3.2 187 0.107 P6KE130A 124 137 1.0 111 5.0 3.4 179 0.107 P6KE150 135 165 1.0 121 5.0 2.8 215 0.108 P6KE150A 143 158 1.0 128 5.0 2.9 207 0.108 P6KE160 144 176 1.0 130 5.0 2.6 230 0.108 P6KE160A 152 168 1.0 136 5.0 2.7 219 0.108 P6KE170 153 187 1.0 138 5.0 2.5 244 0.108 P6KE170A 162 179 1.0 145 5.0 2.6 234 0.108 P6KE180 162 198 1.0 146 5.0 2.3 258 0.108 P6KE180A 171 189 1.0 154 5.0 2.4 246 0.108 P6KE200 180 220 1.0 162 5.0 2.1 287 0.108 P6KE200A 190 210 1.0 171 5.0 2.2 274 0.108 P6KE220 198 242 1.0 175 5.0 1.7 344 0.108 P6KE220A 209 231 1.0 185 5.0 1.8 328 0.108 P6KE250 225 275 1.0 202 5.0 1.7 360 0.110 P6KE250A 237 263 1.0 214 5.0 1.7 344 0.110 P6KE300 270 330 1.0 243 5.0 1.4 430 0.110 P6KE300A 285 315 1.0 256 5.0 1.4 414 0.110 P6KE350 315 385 1.0 284 5.0 1.2 504 0.110 P6KE350A 332 368 1.0 300 5.0 1.2 482 0.110 P6KE400 360 440 1.0 324 5.0 1.0 574 0.110 P6KE400A 380 420 1.0 342 5.0 1.1 548 0.110 P6KE440 396 484 1.0 356 5.0 0.95 631 0.110 P6KE440A 418 462 1.0 376 5.0 1.0 602 0.110 NOTES: 1.V(BR)measured after IT applied for 300ms,IT=square wave pulse or equivalent 2.Surge current waveform per Fig.3 and derated per Fig.2 3.For bidirectional types having VWM of 10 volts and less,the ID limit is doubled 4.All items and symbols are consistent with ANSI/IEEE C62.35 The electrical characteristics above is for reference only. http://www.microdiode.com Rev:2020A0 Page :2

P6KE6.8 THRU P6KE440CA Breakdown Voltage:6.8-440 Volts Peak Pulse P ower:600 Watts FIG. 1-PEAK PULSE POWER RATING CURVE FIG. 2-PULSE DERATING CURVE 100 )M p 100 p POWER,kw 10 NPSTAUHO=LON2SW-5RE NE CW PinAE VFTEIIGTFI.OV3ERM CURRENT(ITAGE,% 75 LSE )or MCEN U pR PEAK P 1.0 WER(PpG IN PE 50 p,M POTIN Pp SE RA 25 0.10.1ms 1.0ms 10ms 100ms 1.0ms 10ms PULDE td,PULSE WIDTH,sec. AK E 0 FIG.3-PULSE WAVEFORM P 0 25 50 75 100 125 150 175 200 150 PULSE WIDTH (td) is DEFINED TA AMBIENT TEMPERATURE,( C) tr=10msec as the POINT WHERE the PEAK % CURRENT DECAYS to 50% of IppM T, FIG. 4-TYPICAL JUNCTIONAL CAPACITANCE EN PEAK VALUE IppM UNIDIRECTIONAL R R 100 10,000 U E C HALF VALUEIP2PM MZEERAOS UBRIAESD at S L U AK P 50 1a0s /D10F0IN0msEeDc bWyA RV.EEF.AORM pF ,PEM NCE, 1,000 Tf=A1=.205M HCz p A Vsig=50mVp-p Ip CIT A td P 0 A 0 1.0 2.0 3.0 4.0 N C t,TIME,ms O FIG.5-STEADY STATE POWER DERATING CURVE CTI 100 MSTEAANSDU-ROEFDF at 5.00 JIN VOLTAGE,VwM L=0.375” (9.5mm) 60Hz RESISTIVE C,J R lLEAD LENGTHS OR INDUCTIVE LOAD E W POTS 3.75 E AT ATW 10 ADY STPATION, 2.50 1(4.60 14.06 10m.0m40)” 1.0 V(BR),BREAKDO10WN VOLTAGE,VO1L0T0S 200 STESSI COPPER HEAT SINKS ,AV)DI 1.25 M( P FIG.6-MAXIMUM NON-REPETITIVE FORWARD SURGE 0 ENT CURRENT UNIDIRECTIONAL ONLY 0 25 50 75 100 125 150 175 200 R 200 R TL,LEAD TEMPERATURE, C U C FIG.7-TYPICAL REVERSE LEAKAGE CHARCTERISTICS E 100 G E 1000 A G RS A UE RSE LEAKMPERES 10100 MSVTOEALANTSADUG-ROEEF,VDFw AmT DEVICES RWARD SAMPER VEOA FO TJ=TJmax. NEOUS RERENT,MICR 0.11 TA=25 C I,PEAK FSM 101.0 8(J.E3mDEs CS IMNGetLhEod H)AL1F0 SINE-WAVE 100 ANTACUR 0.01 NUMBER OF CYCLES AT 60Hz T S N 0.001 I 0 100 200 300 400 500 V(BR),BREAKDOWN VOLTAGE,VOLTS The curve characteristics above is for reference only. https://www.microdiode.com Rev:2020A0 Page :2