Rev 8-28-2017 LED-60W Series Fixed Output and Dimmable Switch Mode LED Drivers TYPE Electrical Specifications TL Input Voltage Range: 100-277 Vac Nom. (90-305 V Min/Max) E332160 Can endure 320Vac for 48 Hrs, 350Vac for Input Over-Voltage: 2 Hrs Frequency: 50/60 Hz Nom. (47-63 Hz Min/Max) Power Factor: >0.90 @ full load, 100V through 277V Inrush Current: <30.0 Amps max @ 230 Vac, cold start 25ºC Input Current (Max): 0.90 Amps max Maximum Power: 60W Current Accuracy: ± 1% Over input line variation Load Regulation: ± 3% THD: ≤ 20% @ full load Leakage Current: 400 µA Typical Hold Up Time: Half Cycle Protections Over-voltage Output Over-current Output Constant Current Models Short Circuit Auto Recovery Output Current Output Voltage Max. Output Typical Environmental Specifications Model (mA ±3%) Range (Vdc) Power (W) Efficiency Max Case Life Temp: LED60W-170-C0350-XX 350 56-170 59.5 92% 73˚C (5 year warranty) LED60W-134-C0450-XX 450 44-134 60 92% Maximum Case Temp (UL): 90ºC LED60W-086-C0700-XX 700 28-86 60 92% Minimum Starting Temp: -30ºC LED60W-058-C1050-XX 1050 19-58 60 91% LED60W-048-C1250-XX 1250 16-48 60 91% UL Type TL Rating: Class 2: 90/54°C; Non-Class 2: 90/51°C LED60W-043-C1400-XX 1400 14-43 60 91% Storage Temperature: -40ºC to +85ºC LED60W-036-C1670-XX 1670 12-36 60 91% Humidity: 5% to 95% LED60W-027-C2300-XX 2300 9-27 60 90% Cooling: Convection LED60W-024-C2500-XX 2500 8-24 60 90% Vibration Frequency: 5 to 55 Hz/2g, 30 minutes LED60W-022-C2720-XX 2720 7-22 59.8 89% LED60W-020-C3000-XX 3000 7-20 60 89% Sound Rating: Class A LED60W-018-C3330-XX 3330 6-18 59.9 88% 418,000 Hours at full load and 40ºC ambi- MTBF: LED60W-015-C4000-XX 4000 5-15 60 87% ent conditions per MIL-217F Notice 2 LED60W-012-C5000-XX 5000 4-12 60 87% EMC: FCC 47CFR Part 15 Class B compliant -XX indicates dimming options are available. See options at left. Blank = fixed current output • Total Power: 60 Watts • Input Voltage: 100-277 Vac Nom. Constant Voltage Models • UL Dry & Damp Location Rated Output Voltage Output Current Max. Output Typical Model (Vdc ±5%) Range (mA) Power (W) Efficiency • IP66 LED60W-012 • 12 1250-5000 60 87% • High Power Factor LED60W-015 15 1000-4000 60 87% • UL Type HL Rated for Hazardous Locations LED60W-018 18 833-3300 59.9 88% • Constant Current & Constant Voltage with Isolation LED60W-020 20 750-3000 60 89% LED60W-022 22 680-2720 59.8 89% • Black Magic Thermal Advantage™ Plastic Housing LED60W-024 • 24 625-2500 60 90% • UL Sign Components Manual (S.A.M. Models) LED60W-027 27 575-2300 60 90% LED60W-036 36 418-1670 60 91% Dimming Option: LED60W-043 43 350-1400 60 91% 0-10V & Resistance dimmable models include an extra two wires +Purple/-Gray on the output side. “-D” Compatible with most quality LED60W-048 48 313-1250 60 91% 0-10V wall dimmers. See page 3 for additional specifications. LED60W-058 58 263-1050 60 91% LED60W-086 86 175-700 60 92% LED60W-134 134 113-450 60 92% LED60W-170 170 88-350 59.5 92% NLEoDt ed:r ivers are designed and intended to operate LED loads only. Non-LED • Indicates S.A.M. Class 2: US/Canada loading may be outside the specified design limits of our LED drivers, and therefore cannot be covered by any warranty. If you desire to use our LED drivers to operate non-LED loads please contact us to discuss compatibility. © 2017 Thomas Research Products. Specifications subject to change without notice. Pg 1 of 3 Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com

LED-60W Series Fixed Output and Dimmable Switch Mode LED Drivers Dimensions 6.81 [173.0] IN [mm] 0.24 [6] []1 71.3 []0.16 4 8 2. ]7 2 [6 0 1. WIRE SPECS: Input Leads: 18 AWG, rated 600 V, 105C, min. ]8 Output Leads: 18 AWG, rated 300 V, 105C, min. 6.42 [163.0] [31 7. DAlilm wmireinsg a Lree astdrasn: d2e2d A wWitGh ,s roaldteedr 3d0ip0p eVd, 1e0n5dCs.. 0. 7.25 [184.0] 5.91 Min [150 Min] 0.90 [22.8] 5.91 Min [150 Min] Dimming 0.39±0.04 [10±1] Purple (+) INPUT Gray (-) Black (L) White (N) Green/Yellow (GND)0.39±0.04 [10±1] ]5 6. 4 [3 2.24±0.12 [57.0±3] 1.8 2.24±0.12 [57.0±3] OUTPUT Red (+) Blue (-) 3.21 [81.5] Tc = 90°C max Power Characteristics Power Factor / Load THD / Load 1.00 50% 0.90 45% 0.80 40% 0.70 35% 0.60 PF0.50 HD30% T25% 0.40 120Vac 120Vac 0.30 277Vac 20% 277Vac 0.20 15% 0.10 10% 0.00 0% 50% 60% 70% 80% 90% 100% 50% 60% 70% 80% 90% 100% Load Load Lifetime / Case Temperature Safety Cert. Standard (Full Load @ 120Vac) UL/CUL UL8750 & CAN/CSA-22.2 350 325 CE EN 61347 300 EMC Standard Notes s)275 Hr250 FCC, 47CFR Part 15 Class B me(k222050 EN 61000-3-2 Lifeti111527055 EENN 6611000000--34--35 C2 lkaVss/ 4C kV 8/20µsec 100 75 50 25 0 45 50 55 60 65 70 75 80 85 90 Case Hotspot Temperature (°C) UL Conditions of Acceptability See website for additional information Note: The area under the life-temperature curve represents where the driver has highly reliable operation within specification. Driver performance may drift out of published specifications as the hours of operation exceed the curve at a given temperature. Higher operating temperatures increase the chances of a failure to function. Other electrical, mechanical and environmental factors affect driver lifetime but are not represented in this calculation. © 2017 Thomas Research Products. Specifications subject to change without notice. Pg 2 of 3 Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com

LED-60W Series Fixed Output and Dimmable Switch Mode LED Drivers “-D” Option: 0-10VDC and Resistance Dimming Parameters Minimum Typical Maximum Source Current out of 0-10V Purple Wire 0 mA —- 2 mA Absolute Voltage Range on 0-10V (+) Purple Wire -2.0 V —- +15 V Output Current / 0-10VDC Dimming Input 100 90 Typical Dimming Circuit % 80 70 Dim (+) Purple ent 60 r r50 LED60W-XX-CXXXX-D IP710 Wall Dimmer u C40 Dim (-) Gray ut 30 p ut20 (Dimmer must be current-sink type control) O 10 0 0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V Dimming Input (Vdc) Notes: 1. 0-10V dimmable version comes with an extra two wires +Purple/-Gray on the output side. 2. Compatible with most 0-10V Wall Slide dimmers and direct 0-10V analog signal. Recommended dimmer is Leviton IP710 or equivalent 3. 0-10V dimmable version is not intended to dim below about 5% @ 0V or 10% @ 1.0V 4. 0-10V dimmable version output will be 100% with Purple/Gray open and minimum with Purple/Gray Shorted. © 2017 Thomas Research Products. Specifications subject to change without notice. Pg 3 of 3 Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com