4-6 Watts C xppower.com D JCD Series - C D • 2:1 Input Range • Industry Standard Package • 1600 VDC Isolation • Continuous Short Circuit Protection • -40 °C to +100 °C Operating Temperature • Single & Dual Outputs • 3 Year Warranty Specification Input General Input Voltage Range • 5 V (4.5-9 VDC) Efficiency • See table 12 V (9-18 VDC) Isolation Voltage • 1600 VDC Input to Output 24 V (18-36 VDC) For optional high isolation versions 48 V (36-72 VDC) 3500 VDC Input to Output add suffix -H to Input Current • See table model number Input Reflected • 35 mA rms through 12 µH inductor 1600 VDC Input to Case Ripple Current 1600 VDC Output to Case Input Filter • Pi network Isolation Capacitance • 500 pF typical input to output Input Surge • 5 V models 15 VDC for 100 ms Isolation Resistance • 109 12 V models 24 VDC for 100 ms Switching Frequency • 266Ω kHz typical 24 V models 40 VDC for 100 ms Power Density • 4 W: 10 W/in3 , 5 W: 12.5 W/in3, 48 V models 80 VDC for 100 ms 6 W: 15 W/in3 MTBF • >1.1 MHrs to MIL-STD-217F at 25 °C, GB Output Output Voltage • See table Environmental Setpoint Accuracy • ±1% (±2% for JCD0412/24/48S3V3 Operating Temperature • -40 °C to +100 °C (see derating curve) & D03 models) Case Temperature • +100 °C max Voltage Balance • ±1% (±2% D03 models) Storage Temperature • -55 °C to +125 °C Minimum Load • No minimum load required Cooling • Convection-cooled Line Regulation • ±0.5% Operating Humidity • Up to 95% RH, non-condensing Load Regulation • ±0.5% single outputs, ±1.5% for S3V3 & D03 models EMC Cross Regulation • ±5% (see note 1) Emissions • EN55022 Class A conducted with external Ripple & Noise • 60 mV pk-pk, 20 MHz bandwidth. components, see application note See note 2 ESD Immunity • EN61000-4-2, level 3, Perf Criteria B Start Up Delay • 20 ms typical for 5 V input models, 500 ms typical for 12/24/48 V input Radiated Immunity • EN61000-4-3, 10 V/m, Perf Criteria A models EFT/Burst • EN61000-4-4, level 3 Perf Criteria B* Transient Response • 3% max deviation, recovery to within 1% Surge • EN61000-4-5, level 2, Perf Criteria A* in 250 µs (5% & 300 µS for Conducted Immunity • EN61000-4-6, 10 Vrms, Perf Criteria B* JCD0412/24/48S3V3 & D03 models) for a Magnetic Field • EN61000-4-8, 1 A/m, Perf Criteria B* 25% load change Temperature • 0.02%/°C Coefficient Safety Overload Protection • 150% of full load on 5 V input models only Safety Approvals • UL60950-1, CAN/CSA C22.2 No.60950-1, Short Circuit Protection • Indefinite with auto recovery UL62368-1 Maximum Capacitive • See table Load *External input capacitor required, 220 µF/100 V

JCD04 D Models and Ratings C Output Output Input Current(1) Maximum Input Voltage Voltage Current No Load Full Load Capacitive Load Efficiency Model Number - D 3.3 V 1200 mA 25 mA 1084 mA 3300 µF 73% JCD0405S3V3 5.0 V 800 mA 25 mA 1026 mA 1000 µF 78% JCD0405S05 C 12.0 V 333 mA 30 mA 974 mA 220 µF 82% JCD0405S12 15.0 V 266 mA 30 mA 973 mA 100 µF 82% JCD0405S15 4.5-9 VDC ±3.3 V ±600 mA 25 mA 1042 mA ±680 µF 76% JCD0405D03 ±5.0 V ±400 mA 30 mA 1012 mA ±470 µF 79% JCD0405D05 ±12.0 V ±166 mA 35 mA 963 mA ±100 µF 83% JCD0405D12 ±15.0 V ±133 mA 40 mA 985 mA ±47 µF 81% JCD0405D15 3.3 V 1200 mA 30 mA 445 mA 680 µF 74% JCD0412S3V3 5.0 V 800 mA 30 mA 427 mA 1000 µF 78% JCD0412S05 9.0 V 444 mA 30 mA 416 mA 470 µF 80% JCD0412S09 12.0 V 333 mA 30 mA 406 mA 100 µF 82% JCD0412S12 15.0 V 266 mA 30 mA 401 mA 100 µF 83% JCD0412S15 24.0 V 166 mA 30 mA 406 mA 22 µF 82% JCD0412S24 9-18 VDC ±3.3 V ±600 mA 30 mA 438 mA ±680 µF 76% JCD0412D03 ±5.0 V ±400 mA 30 mA 427 mA ±470 µF 78% JCD0412D05 ±9.0 V ±220 mA 30 mA 416 mA ±220 µF 80% JCD0412D09 ±12.0 V ±166 mA 30 mA 427 mA ±47 µF 78% JCD0412D12 ±15.0 V ±133 mA 30 mA 416 mA ±150 µF 80% JCD0412D15 ±24.0 V ±83 mA 30 mA 416 mA ±10 µF 80% JCD0412D24 3.3 V 1200 mA 20 mA 216 mA 1000 µF 77% JCD0424S3V3 5.0 V 800 mA 20 mA 208 mA 1000 µF 80% JCD0424S05 9.0 V 444 mA 20 mA 203 mA 470 µF 82% JCD0424S09 12.0 V 333 mA 20 mA 198 mA 330 µF 84% JCD0424S12 15.0 V 266 mA 20 mA 203 mA 330 µF 82% JCD0424S15 24.0 V 166 mA 20 mA 200 mA 1000 µF 83% JCD0424S24 18-36 VDC ±3.3 V ±600 mA 20 mA 216 mA ±1000 µF 77% JCD0424D03 ±5.0 V ±400 mA 20 mA 208 mA ±330 µF 80% JCD0424D05 ±9.0 V ±220 mA 20 mA 200 mA ±220 µF 83% JCD0424D09 ±12.0 V ±166 mA 20 mA 200 mA ±68 µF 83% JCD0424D12 ±15.0 V ±133 mA 20 mA 203 mA ±220 µF 82% JCD0424D15 ±24.0 V ±83 mA 20 mA 210 mA ±47 µF 79% JCD0424D24 3.3 V 1200 mA 15 mA 108 mA 1000 µF 76% JCD0448S3V3 5.0 V 800 mA 15 mA 104 mA 1000 µF 80% JCD0448S05 9.0 V 444 mA 15 mA 100 mA 470 µF 83% JCD0448S09 12.0 V 333 mA 15 mA 99 mA 330 µF 84% JCD0448S12 15.0 V 266 mA 15 mA 102 mA 68 µF 81% JCD0448S15 24.0 V 166 mA 15 mA 98 mA 68 µF 85% JCD0448S24 36-72 VDC ±3.3 V ±600 mA 15 mA 109 mA ±1000 µF 76% JCD0448D03 ±5.0 V ±400 mA 15 mA 104 mA ±470 µF 80% JCD0448D05 ±9.0 V ±220 mA 15 mA 100 mA ±220 µF 83% JCD0448D09 ±12.0 V ±166 mA 15 mA 100 mA ±220 µF 83% JCD0448D12 ±15.0 V ±133 mA 15 mA 100 mA ±47 µF 83% JCD0448D15 ±24.0 V ±83 mA 15 mA 105 mA ±100 µF 79% JCD0448D24 Notes 1. When one output is set at 100% load and the other varies between 25% & 100% load. 3. Input current specified at nominal 5 V, 12 V, 24 V or 48 V input. 2.Measured with 20 MHz bandwidth and 1 µF ceramic capacitor across output rails. 4. For optional 3500 VDC isolation add suffix -H to part number e.g. JCD0424S12-H Mechanical Details DIA 1.25 0.02 0.90 (31.75) (0.50) (22.86) Pin Single Dual 2 3 9 11 2 -Vin -Vin Notes (200..8302) Bottom View (105..6204) 39 N-oV Pinin Co-mVminon 12.. WAlel idgihmt:en0s.0io4n lsb sa r(e1 8in g i)n acphperso (xm.m) 23 22 16 14 0 11 N.C. -Vout 3. Pin diameter: 0.02 ±0.002 (0.5 ±0.005) 14 +Vout +Vout 4. Pin pitch and length tolerance: ±0.014 (±0.35) (02..1504) (05..2008) 16 -Vout Common 5. Case tolerance: ±0.02 (±0.5) 0.40 (10.40) 22 +Vin +Vin 6. Package: 24 pin DIL nickel-coated copper 23 +Vin +Vin 00.12 (3.00) Min. Application N ot es Derating Curve Input Filter 100 80 + 12 µH +Vin +Vout %) 5 V input 12, 24 & 48 V inpu t Load (6400 220 µF CDonCv/eDrCter LOAD 20 - -Vin -Vout 0 -40 -20 0 10 20 30 40 50 60 70 80 90 100 Ambient Temperature (ºC)

C JCD05 Models and Ratings D Output Output Input Current(1) Maximum - Input Voltage Efficiency Model Number(4) Voltage Current No Load Full Load Capacitive Load C 3.3 V 1300 mA 25 mA 1159 mA 1000 µF 74% JCD0505S3V3 D 5.0 V 1000 mA 25 mA 1298 mA 1000 µF 77% JCD0505S05 12.0 V 417 mA 30 mA 1220 mA 330 µF 82% JCD0505S12 15.0 V 333 mA 30 mA 1218 mA 220 µF 82% JCD0505S15 4.5-9 VDC ±3.3 V ±750 mA 25 mA 1302 mA ±680 µF 76% JCD0505D03 ±5.0 V ±500 mA 30 mA 1265 mA ±330 µF 79% JCD0505D05 ±12.0 V ±208 mA 35 mA 1217 mA ±100 µF 82% JCD0505D12 ±15.0 V ±167 mA 40 mA 1221 mA ±47 µF 82% JCD0505D15 3.3 V 1300 mA 30 mA 483 mA 1000 µF 74% JCD0512S3V3 5.0 V 1000 mA 30 mA 541 mA 1000 µF 77% JCD0512S05 9.0 V 555 mA 30 mA 520 mA 470 µF 80% JCD0512S09 12.0 V 417 mA 30 mA 508 mA 330 µF 82% JCD0512S12 15.0 V 333 mA 30 mA 508 mA 100 µF 82% JCD0512S15 24.0 V 208 mA 30 mA 508 mA 68 µF 82% JCD0512S24 9-18 VDC ±3.3 V ±750 mA 30 mA 595 mA ±1000 µF 70% JCD0512D03 ±5.0 V ±500 mA 30 mA 541 mA ±1000 µF 77% JCD0512D05 ±9.0 V ±278 mA 30 mA 527 mA ±330 µF 79% JCD0512D09 ±12.0 V ±208 mA 30 mA 520 mA ±47 µF 80% JCD0512D12 ±15.0 V ±167 mA 30 mA 527 mA ±47 µF 79% JCD0512D15 ±24.0 V ±104 mA 30 mA 514 mA ±10 µF 81% JCD0512D24 3.3 V 1300 mA 20 mA 239 mA 1000 µF 75% JCD0524S3V3 5.0 V 1000 mA 20 mA 261 mA 1000 µF 80% JCD0524S05 9.0 V 555 mA 20 mA 254 mA 470 µF 82% JCD0524S09 12.0 V 417 mA 20 mA 251 mA 1000 µF 83% JCD0524S12 15.0 V 333 mA 20 mA 248 mA 220 µF 84% JCD0524S15 24.0 V 208 mA 20 mA 248 mA 1000 µF 84% JCD0524S24 18-36 VDC ±3.3 V ±750 mA 20 mA 274 mA ±470 µF 76% JCD0524D03 ±5.0 V ±500 mA 20 mA 263 mA ±680 µF 79% JCD0524D05 ±9.0 V ±278 mA 20 mA 251 mA ±220 µF 83% JCD0524D09 ±12.0 V ±208 mA 20 mA 251 mA ±220 µF 83% JCD0524D12 ±15.0 V ±167 mA 20 mA 251 mA ±22 µF 83% JCD0524D15 ±24.0 V ±104 mA 20 mA 254 mA ±22 µF 82% JCD0524D24 3.3 V 1300 mA 12 mA 117 mA 1000 µF 76% JCD0548S3V3 5.0 V 1000 mA 12 mA 130 mA 1000 µF 80% JCD0548S05 9.0 V 555 mA 12 mA 124 mA 100 µF 84% JCD0548S09 12.0 V 417 mA 12 mA 132 mA 470 µF 80% JCD0548S12 15.0 V 333 mA 12 mA 127 mA 330 µF 82% JCD0548S15 24.0 V 208 mA 12 mA 122 mA 220 µF 85% JCD0548S24 36-72 VDC ±3.3 V ±750 mA 12 mA 140 mA ±1000 µF 74% JCD0548D03 ±5.0 V ±500 mA 12 mA 130 mA ±470 µF 80% JCD0548D05 ±9.0 V ±278 mA 12 mA 127 mA ±220 µF 82% JCD0548D09 ±12.0 V ±208 mA 12 mA 124 mA ±100 µF 84% JCD0548D12 ±15.0 V ±167 mA 12 mA 128 mA ±220 µF 81% JCD0548D15 ±24.0 V ±104 mA 12 mA 128 mA ±22 µF 81% JCD0548D24 Notes 1. When one output is set at 100% load and the other varies between 25% & 100% load. 3. Input current specified at nominal 5 V, 12 V, 24 V or 48 V input. 2.Measured with 20 MHz bandwidth and 1 µF ceramic capacitor across output rails. 4. For optional 3500 VDC isolation add suffix -H to part number e.g. JCD0524S12-H Mechanical Details DIA 1.25 0.02 0.90 (31.75) (0.50) (22.86) Pin Single Dual Notes 2 -Vin -Vin 2 3 9 11 3 -Vin -Vin 1. All dimensions are in inches (mm) (200..8302) Bottom View (105..6204) 9 No Pin Common 2. Weight:0.04 lbs (18 g) approx. 11 N.C. -Vout 3. Pin diameter: 0.02 ±0.002 (0.5 ±0.005) 23 22 16 14 0 14 +Vout +Vout 4. Pin pitch and length tolerance: ±0.014 (±0.35) 0.10 0.20 16 -Vout Common 5. Case tolerance: ±0.02 (±0.5) (2.54) (5.08) 22 +Vin +Vin 6. Package: 24 pin DIL nickel-coated copper 0.40 (10.40) 23 +Vin +Vin 00.12 (3.00) Min. Application N ot es Derating Curve Input Filter 100 80 + 12 µH +Vin +Vout %) 5 V input 12, 24 & 48 V inpu t Load (4600 220 µF CDonCv/eDrCter LOAD 20 - -Vin -Vout 0 -40 -20 0 10 20 30 40 50 60 70 80 90 100 Ambient Temperature (ºC)

JCD06 D Models and Ratings C Output Output Input Current(1) Maximum Input Voltage Voltage Current No Load Full Load Capacitive Load Efficiency Model Number(4) - D 3.3 V 1400 mA 25 mA 1232 mA 1000 µF 75% JCD0605S3V3 5.0 V 1200 mA 25 mA 1558 mA 1000 µF 77% JCD0605S05 C 12.0 V 500 mA 25 mA 1445 mA 330 µF 83% JCD0605S12 15.0 V 400 mA 30 mA 1445 mA 220 µF 83% JCD0605S15 4.5-9 VDC ±3.3 V ±909 mA 25 mA 1578 mA ±680 µF 76% JCD0605D03 ±5.0 V ±600 mA 25 mA 1500 mA ±330 µF 80% JCD0605D05 ±12.0 V ±250 mA 35 mA 1428 mA ±100 µF 84% JCD0605D12 ±15.0 V ±200 mA 40 mA 1428 mA ±47 µF 84% JCD0605D15 3.3 V 1400 mA 30 mA 520 mA 220 µF 74% JCD0612S3V3 5.0 V 1200 mA 30 mA 649 mA 1000 µF 77% JCD0612S05 9.0 V 666 mA 30 mA 632 mA 680 µF 79% JCD0612S09 12.0 V 500 mA 30 mA 617 mA 1000 µF 81% JCD0612S12 15.0 V 400 mA 30 mA 604 mA 100 µF 82% JCD0612S15 24.0 V 250 mA 30 mA 617 mA 100 µF 81% JCD0612S24 9-18 VDC ±3.3 V ±909 mA 30 mA 675 mA ±1000 µF 74% JCD0612D03 ±5.0 V ±600 mA 30 mA 657 mA ±680 µF 76% JCD0612D05 ±9.0 V ±333 mA 30 mA 617 mA ±22 µF 81% JCD0612D09 ±12.0 V ±250 mA 30 mA 632 mA ±330 µF 79% JCD0612D12 ±15.0 V ±200 mA 30 mA 625 mA ±100 µF 80% JCD0612D15 ±24.0 V ±125 mA 30 mA 625 mA ±10 µF 80% JCD0612D24 3.3 V 1400 mA 20 mA 256 mA 1000 µF 75% JCD0624S3V3 5.0 V 1200 mA 20 mA 313 mA 1000 µF 80% JCD0624S05 9.0 V 666 mA 20 mA 301 mA 680 µF 83% JCD0624S09 12.0 V 500 mA 20 mA 301 mA 1000 µF 83% JCD0624S12 15.0 V 400 mA 20 mA 301 mA 100 µF 83% JCD0624S15 24.0 V 250 mA 20 mA 294 mA 470 µF 85% JCD0624S24 18-36 VDC ±3.3 V ±909 mA 20 mA 328 mA ±1000 µF 76% JCD0624D03 ±5.0 V ±600 mA 20 mA 308 mA ±680 µF 81% JCD0624D05 ±9.0 V ±333 mA 20 mA 301 mA ±220 µF 83% JCD0624D09 ±12.0 V ±250 mA 20 mA 301 mA ±470 µF 83% JCD0624D12 ±15.0 V ±200 mA 20 mA 301 mA ±100 µF 83% JCD0624D15 ±24.0 V ±125 mA 20 mA 304 mA ±100 µF 82% JCD0624D24 3.3 V 1400 mA 12 mA 128 mA 2200 µF 75% JCD0648S3V3 5.0 V 1200 mA 12 mA 156 mA 1000 µF 80% JCD0648S05 9.0 V 666 mA 12 mA 148 mA 1000 µF 84% JCD0648S09 12.0 V 500 mA 12 mA 148 mA 470 µF 84% JCD0648S12 15.0 V 400 mA 12 mA 154 mA 1000 µF 81% JCD0648S15 24.0 V 250 mA 12 mA 147 mA 220 µF 85% JCD0648S24 36-72 VDC ±3.3 V ±909 mA 12 mA 164 mA ±1000 µF 76% JCD0648D03 ±5.0 V ±600 mA 12 mA 156 mA ±680 µF 80% JCD0648D05 ±9.0 V ±333 mA 12 mA 150 mA ±680 µF 83% JCD0648D09 ±12.0 V ±250 mA 12 mA 148 mA ±330 µF 84% JCD0648D12 ±15.0 V ±200 mA 12 mA 152 mA ±330 µF 82% JCD0648D15 ±24.0 V ±125 mA 12 mA 150 mA ±150 µF 83% JCD0648D24 Notes 1. When one output is set at 100% load and the other varies between 25% & 100% load. 3. Input current specified at nominal 5 V, 12 V, 24 V or 48 V input. 2.Measured with 20 MHz bandwidth and 1 µF ceramic capacitor across output rails. 4. For optional 3500 VDC isolation add suffix -H to part number e.g. JCD0624S12-H Mechanical Details DIA 1.25 0.02 0.90 (31.75) (0.50) (22.86) Pin Single Dual 2 3 9 11 2 -Vin -Vin Notes (200..8302) Bottom View (105..6204) 3 -Vin -Vin 1. All dimensions are in inches (mm) 9 No Pin Common 2. Weight:0.04 lbs (18 g) approx. 23 22 16 14 0 11 N.C. -Vout 3. Pin diameter: 0.02 ±0.002 (0.5 ±0.005) 14 +Vout +Vout 4. Pin pitch and length tolerance: ±0.014 (±0.35) 0.10 0.20 (2.54) (5.08) 16 -Vout Common 5. Case tolerance: ±0.02 (±0.5) 0.40 (10.40) 22 +Vin +Vin 6. Package: 24 pin DIL nickel-coated copper 23 +Vin +Vin 00.12 (3.00) Min. Application Notes Derating Curve Input Filter 100 80 + 12 µH +Vin +Vout %) 5 V input 12, 24 & 48 V inpu t Load (6400 220 µF CDonCv/eDrCter LOAD 20 - -Vin -Vout 0 -40 -20 0 10 20 30 40 50 60 70 80 90 100 Ambient Temperature (ºC) 13 Sept 19