ETC1-1-13 E-Series Transformer, RF 1:1 Transmission Line 4.5 - 3000 MHz Rev. V12 Features Functional Schematic  Surface Mount  1:1 impedance ratio  Available on Tape and Reel  RoHS Compliant and Pb Free  260°C Reflow Compatible  Available on Tape and Reel Description The ETC1-1-13 is a 1:1 transmission line transformer in a low cost surface mount package. Ideally suited for high volume cellular and wireless Pin Configuration applications. Pin No. Function 1 Primary Dot 2 Primary 3 Secondary 4 Not Connected (ground) 5 Secondary Dot Electrical Specifications: Freq. = 4.5 - 3000 MHz, T = 25°C, Z = 50 Ω, P = 0 dBm A 0 IN Parameter Conditions Units Min. Typ. Max. 4.5 - 1000 MHz 0.32 1.0 Insertion Loss 1000 - 2000 MHz dB - - 2.0 (Ref. level -3 dB) 2000 - 3000 MHz - 3.5 Amplitude Balance - dB - - ±1.0 Phase Balance - degree - - ±20 (Ref. value 0°) Ordering Information Recommended Maximum Ratings Part Number Description Parameter Units ETC1-1-13TR 2000 piece reel Input RF Power 250 mW DC Current 30 mA Operating Temperature -55ºC to +85ºC 111 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DS-ETC1-1-13

ETC1-1-13 E-Series Transformer, RF 1:1 Transmission Line 4.5 - 3000 MHz Rev. V12 Typical Performance Curves: T = 25°C, Z = 50 Ω, P = 0 dBm A 0 IN Insertion Loss Input Impedance Phase Unbalance Amplitude Unbalance Full temperature plots available on request 222 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DS-ETC1-1-13

ETC1-1-13 E-Series Transformer, RF 1:1 Transmission Line 4.5 - 3000 MHz Rev. V12 Recommended Board Layout / Footprint2 Outline Drawing3,4,5,6 2. Recommended PCB layout shown uses 0.8 mm FR4, grounded coplanar wave guide, transmission line width 0.90 mm and gap 0.25 mm. 3. Dimensions in mm. 4. Tolerance: ±0.2 mm unless otherwise noted. Application Circuit 5. Model number and lot code are printed on the reel. 6. Lead finish: Sn. Carrier Tape Orientation Tape & Reel Information Parameter Units Value Qty per reel - 2000 Reel Size mm 330 Width mm 12.0 Pitch mm 8.0 Orientation - F5 Reference Application Note ANI-019 for orientation 333 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DS-ETC1-1-13

ETC1-1-13 E-Series Transformer, RF 1:1 Transmission Line 4.5 - 3000 MHz Rev. V12 MACOM Technology Solutions Inc. All rights reserved. Information in this document is provided in connection with MACOM Technology Solutions Inc ("MACOM") products. These materials are provided by MACOM as a service to its customers and may be used for informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM assumes no responsibility for errors or omissions in these materials. MACOM may make changes to specifications and product descriptions at any time, without notice. MACOM makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS, WHICH MAY RESULT FROM THE USE OF THESE MATERIALS. MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale. 444 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DS-ETC1-1-13