Notice for TAIYO YUDEN products Please read this notice before using the TAIYO YUDEN products. REMINDERS ■ Product Information in this Catalog (4) Power generation control equipment (nuclear power, Product information in this catalog is as of October 2019. All of the hydroelectric power, thermal power plant control system, etc.) contents specified herein and production status of the products listed (5) Undersea equipment (submarine repeating equipment, in this catalog are subject to change without notice due to technical underwater work equipment, etc.) improvement of our products, etc. Therefore, please check for the (6) Military equipment latest information carefully before practical application or use of our (7) Any other equipment requiring extremely high levels of safety products. and/or reliability equal to the equipment listed above Please note that TAIYO YUDEN shall not be in any way responsible *Notes: for any damages and defects in products or equipment incorporating 1. There is a possibility that our products can be used only our products, which are caused under the conditions other than those for aviation equipment that does not directly affect the safe specified in this catalog or individual product specification sheets. operation of aircraft (e.g., in-flight entertainment, cabin light, electric seat, cooking equipment) if such use meets ■ Approval of Product Specifications requirements specified separately by TAIYO YUDEN. Please Please contact TAIYO YUDEN for further details of product be sure to contact TAIYO YUDEN for further information specifications as the individual product specification sheets are before using our products for such aviation equipment. available. When using our products, please be sure to approve our 2. Implantable medical devices contain not only internal unit product specifications or make a written agreement on the product which is implanted in a body, but also external unit which is specification with TAIYO YUDEN in advance. connected to the internal unit. ■ Pre-Evaluation in the Actual Equipment and Conditions 4. Limitation of Liability Please conduct validation and verification of our products in actual Please note that unless you obtain prior written consent of TAIYO conditions of mounting and operating environment before using our YUDEN, TAIYO YUDEN shall not be in any way responsible for products. any damages incurred by you or third parties arising from use of the products listed in this catalog for any equipment that is not ■ Limited Application intended for use by TAIYO YUDEN, or any equipment requiring 1. Equipment Intended for Use inquiry to TAIYO YUDEN or prohibited for use by TAIYO YUDEN The products listed in this catalog are intended for general- as described above. purpose and standard use in general electronic equipment (e.g., AV equipment, OA equipment, home electric appliances, office ■ Safety Design equipment, information and communication equipment including, When using our products for high safety and/or reliability-required without limitation, mobile phone, and PC) and other equipment equipment or circuits, please fully perform safety and/or reliability specified in this catalog or the individual product specification sheets. evaluation. In addition, please install (i) systems equipped with a protection circuit and a protection device and/or (ii) systems TAIYO YUDEN has the line-up of the products intended for equipped with a redundant circuit or other system to prevent an use in automotive electronic equipment, telecommunications unsafe status in the event of a single fault for a failsafe design to infrastructure and industrial equipment, or medical devices ensure safety. classified as GHTF Classes A to C (Japan Classes I to III). Therefore, when using our products for these equipment, ■ Intellectual Property Rights please check available applications specified in this catalog Information contained in this catalog is intended to convey examples or the individual product specification sheets and use the of typical performances and/or applications of our products and is corresponding products. not intended to make any warranty with respect to the intellectual property rights or any other related rights of TAIYO YUDEN or any 2. Equipment Requiring Inquiry third parties nor grant any license under such rights. Please be sure to contact TAIYO YUDEN for further information before using the products listed in this catalog for the following ■ Limited Warranty equipment (excluding intended equipment as specified in this Please note that the scope of warranty for our products is limited to catalog or the individual product specification sheets) which may the delivered our products themselves and TAIYO YUDEN shall not cause loss of human life, bodily injury, serious property damage be in any way responsible for any damages resulting from a failure and/or serious public impact due to a failure or defect of the or defect in our products. Notwithstanding the foregoing, if there is products and/or malfunction attributed thereto. a written agreement (e.g., supply and purchase agreement, quality (1) Transportation equipment (automotive powertrain control assurance agreement) signed by TAIYO YUDEN and your company, system, train control system, and ship control system, etc.) TAIYO YUDEN will warrant our products in accordance with such (2) Traffic signal equipment agreement. (3) Disaster prevention equipment, crime prevention equipment (4) Medical devices classified as GHTF Class C (Japan Class III) ■ TAIYO YUDEN’s Official Sales Channel (5) Highly public information network equipment, data- The contents of this catalog are applicable to our products which are processing equipment (telephone exchange, and base purchased from our sales offices or authorized distributors (hereinafter station, etc.) “TAIYO YUDEN’s official sales channel”). Please note that the contents (6) Any other equipment requiring high levels of quality and/or of this catalog are not applicable to our products purchased from any reliability equal to the equipment listed above seller other than TAIYO YUDEN’s official sales channel. 3. Equipment Prohibited for Use ■ Caution for Export Please do not incorporate our products into the following Some of our products listed in this catalog may require specific equipment requiring extremely high levels of safety and/or procedures for export according to“ U.S. Export Administration reliability. Regulations”,“ Foreign Exchange and Foreign Trade Control Law” (1) Aerospace equipment (artificial satellite, rocket, etc.) of Japan, and other applicable regulations. Should you have any (2) Aviation equipment *1 questions on this matter, please contact our sales staff. (3) Medical devices classified as GHTF Class D (Japan Class IV), implantable medical devices *2 20

for General Electronic Equipment for General Electronic Equipment FBAR/SAW DEVICES for MOBILE COMMUNICATIONS FBAR/SAW DEVICES for MOBILE COMMUNICATIONS REFLOW REFLOW ■PARTS NUMBER (A) Previous Rule (applied products registered on March 31, 2010 or before.) F A R - F 5 Q A - 9 1 5 M 0 0 - M 2 A K - X ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪ ⑫ ①Family ④Package code ②Common sign ⑤Product code ③Series name ⑥Common sign Code Product Frequency Range［MHｚ］ ⑦Frequency D5 Duplexer 700 - 1000 D6 Duplexer 1000 - 5000 ⑧Common sign J5 Triplexer 700 - 1000 ⑨Internal code F5 Device 700 - 1000 ⑩Internal code F6 Device 1000 - 5000 G5 Dual Devices 700 - 1000 ⑪Custom code G6 Dual Devices 1000 - 5000 ⑫Packaging (B) New Rule (applied to products registered on April 1, 2010 or later.) D 6 D A 1 G 8 4 2 K 2 C 7 - Y H ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ IG PH RO F ①Series name ②Package code DRE UQ Code Product Frequency Range［MHｚ］ CU ③Product code TE D5 Duplexer 700 - 1000 SN D6 Duplexer 1000 - 5000 ④Frequency CY J5 Triplexer 700 - 1000 ⑤Internal code F5 Device 700 - 1000 ⑥Internal code F6 Device 1000 - 5000 G5 Dual Devices 700 - 1000 ⑦Custom code G6 Dual Devices 1000 - 5000 ⑧Packaging H6 Triple Devices 1000 - 5000 K6 Quadplexer 1000 - 5000 *For further details, please contact to TAIYO YUDEN CO., LTD. ■EXTERNAL DIMENSIONS 2.0×1.6×0.5 1.8×1.4×0.5（Duplexer） 1.4×1.0×0.5 1.8+0.0/-0.2 0.5max 1.4+0.0/-0.2 index 4-0.6254-0.325 4-0.23 4-0.46 0.575 7-0.23 8-0.30 Unit：mm 1.1×0.9×0.5 1.8×1.4×0.5（Dual Filter） 1.5×1.1×0.5 1.50±0.1 0.5max 1.10±0.1 index 1.17 0.39 0.39 0.49 0.78 0.18 0.18 0.21 0.18 0.18 0.21 Unit：mm sawfilter_e-E08R01 ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) . 20 145

for General Electronic Equipment ■PARTS NUMBER ●Duplexers 　System 　Part number Package Size［mm］ Insertion Loss［dB］ Attenuation［dB］ 　Remarks Band 1 D6DA2G140K2A4 1.8×1.4×0.5 max. 1.8/1.8 56/51 D6DA2G140K2A7 1.8×1.4×0.5 max. 1.6/1.7 58/59 D6PE2G140P3AW 2.0×1.6×0.5 max. 1.5/1.6 59/47 Rx : Bal.100ohm D6RB2G140E1AJ 1.8×1.4×0.5 max. 1.7/1.8 57/48 Rx : Bal.100ohm D6RB2G140E1AL 1.8×1.4×0.47 max. 1.7/1.8 57/51 Rx : Bal.100ohm Band 2 D6PF1G960M3B6 2.0×1.6×0.57 max. 2.2/2.7 55/52 D6PF1G960M3B9 2.0×1.6×0.57 max. 2.2/2.7 57/52 D6DA1G960K2B1 1.8×1.4×0.57 max. 1.9/2.5 54/54 D6DA1G960K2B2 1.8×1.4×0.57 max. 1.8/2.3 55/55 D6PE1G960P3BY 2.0×1.6×0.57 max. 2.0/3.1 57/53 Rx : Bal.100ohm D6PE1G960P3BP 2.0×1.6×0.57 max. 2.3/3.0 56/52 Rx : Bal.100ohm D6RB1G960E1HB 1.8×1.4×0.6 max. 2.1/2.9 56/55 Rx : Bal.100ohm Band 3 D6DA1G842K2C4 1.8×1.4×0.6 max. 2.3/2.1 56/56 D6DA1G842K2C7 1.8×1.4×0.38 max. 1.8/1.9 60/56 Band 4 D6DA2G132K2D4 1.8×1.4×0.5 max. 1.5/1.7 57/55 D6DA2G132K2D9 1.8×1.4×0.5 max. 1.6/1.8 60/56 D6PE2G132P3DWB 2.0×1.6×0.5 max. 1.8/1.8 55/50 Rx : Bal.100ohm D6RB2G132E1DF 1.8×1.4×0.5 max. 1.6/1.8 62/54 Rx : Bal.100ohm Band 5 D5DA881M5K2E4 1.8×1.4×0.5 max. 1.4/1.7 58/59 D5RB881M5E1BH 1.8×1.4×0.47 max. 1.4/1.7 58/52 Rx : Bal.100ohm Band 7 D6HL2G655DL06 2.0×1.6×0.54 max. 2.1/2.3 53/57 FBAR D6HQ2G655DP01 1.8×1.4×0.54 max. 2.3/2.2 58/57 FBAR D6HQ2G655DP02 1.8×1.4×0.54 max. 2.0/2.0 58/55 FBAR 2HD Improved D6HQ2G655DP03 1.8×1.4×0.54 max. 2.0/2.0 61/56 D6DA2G655K2F1 1.8×1.4×0.44 max. 2.1/2.2 50/50 D6HN2G655BN54 2.0×1.6×0.54 max. 1.8/2.6 55/56 Rx : Bal.100ohm, FBAR WLAN coexistence Ver. D6HP2G655BP11 1.8×1.4×0.54 max. 1.8/2.4 56/56 Rx : Bal.100ohm, FBAR Band 8 D5PF942M5M3G6 2.0×1.6×0.5 max. 2.1/2.1 57/55 for LTE D5PF942M5M3G9 2.0×1.6×0.5 max. 1.9/2.2 60/52 D5DA942M5K2G6 1.8×1.4×0.5 max. 1.7/1.8 58/59 H D5DA942M5K2S2 1.8×1.4×0.6 max. 1.3/1.5 58/56 for LTE IG D5PE942M5P3GT 2.0×1.6×0.5 max. 1.8/2.2 60/55 Rx : Bal.100ohm PRODUH FREQ BBaanndd 1112 DDD565RDDBAA9174G3274MM8555KEK212WCHF21 111.8..88×××111.4..44×××000.4..554 mmmaaaxxx... 1.116..552///111...6935 556683///565108 Rx : Bal.100ohm CU Band 13 D5PE782M0M3P9 2.0×1.6×0.5 max. 1.6/2.0 64/55 TSEN D5DA782M0K2J6 1.8×1.4×0.5 max. 1.9/1.7 58/61 C Band 14 D5DA793M0K2K2 1.8×1.4×0.44 max. 1.2/2.2 50/50 Y Band 17 D5PF740M0M3R9 2.0×1.6×0.5 max. 1.6/1.8 61/66 D5DA740M0K2L4 1.8×1.4×0.5 max. 1.25/1.65 65/60 Band 20 D5FC847M0K3NE 1.8×1.4×0.44 max. 1.8/1.8 55/56 Band 21 D6DA1G503K2Y1 1.8×1.4×0.44 max. 1.3/1.3 60/60 D6PE1G503P3KW 2.0×1.6×0.5 max. 1.6/2.0 55/56 Rx : Bal.100ohm Band 25 D6HQ1G962DP35 1.8×1.4×0.57 max. 2.5/2.6 57/57 FBAR Band 26 D5PF876M5M3U9 2.0×1.6×0.5 max. 2.0/1.9 56/49 D5DA876M5K2P6 1.8×1.4×0.6 max. 1.3/2.0 60/57 D5PE876M5P3UZ 2.0×1.6×0.5 max. 2.2/2.6 60/49 Rx : Bal.100ohm Band 28 D5PF773M0M3Y6 2.0×1.6×0.5 max. 1.8/2.3 60/53 Block A D5FC773M0K3NC 1.8×1.4×0.44 max. 2.5/2.6 57/57 D5PF788M0M3Y9 2.0×1.6×0.5 max. 1.8/2.4 60/54 Block B D5FC788M0K3ND 1.8×1.4×0.44 max. 1.8/1.9 63/60 Band 66 D6DA2G155K2T2 1.8×1.4×0.44 max. 2.0/2.0 57/54 ●Multiplexers 　System 　Part number Package Size［mm］ Insertion Loss［dB］ Attenuation［dB］ 　Remarks 1.6/1.9 60/49 Band 13+17 Triplexer J5NA782M0P1H6 2.5×2.0×0.6 max. 1.9/1.9 53/55 1.9/2.0 56/55 Band 1+3 Quadplexer K6QZ2G140Q3ZA 2.5×2.0×0.8 max. 1.7/2.3 56/54 2.0/1.9 55/57 K6QZ2G140Q3ZC 2.5×2.0×0.8 max. 2.4/2.3 57/58 sawfilter_e-E08R01 ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) . 146 20

for General Electronic Equipment ■PARTS NUMBER ●W-CDMA / LTE / CDMA 2000 Filters 　System 　Part number Package Size［mm］ Insertion Loss［dB］ Attenuation［dB］ 　Remarks Band 1 Tx F6QA1G950M2AA 1.1×0.9×0.5 max. 1.8 38 Band 1, Band 4 Rx F6QA2G140M2AM 1.1×0.9×0.5 max. 1.9 46 F6QG2G140P2KA 1.1×0.9×0.5 max. 1.7 55 100ohm output Band 2 Tx　BC1 (PCS) Tx F6QA1G880M2AQ 1.1×0.9×0.5 max. 1.7 20 Band 2 Rx　BC1 (PCS) Rx F6QA1G960M2AP 1.1×0.9×0.5 max. 2.8 39 High Att. F6QG1G960P2KT 1.1×0.9×0.5 max. 2.8 44 100ohm output Band 3 Tx F6QA1G747M2QS 1.1×0.9×0.5 max. 2.1 22 Band 3 Rx F6QA1G842M2AN 1.1×0.9×0.5 max. 2.0 38 F6QG1G842P2KD 1.1×0.9×0.5 max. 3.2 45 100ohm output Band 5 Tx　BC0 Tx F5QA836M5M2AR 1.1×0.9×0.5 max. 1.9 45 High Att. Band 5 Rx　BC0 Rx F5QA881M5M2AU 1.1×0.9×0.5 max. 1.3 51 Low Loss/high Att. F5QG881M5P2KG 1.1×0.9×0.5 max. 1.5 56 100ohm output Band 7 Rx F6QA2G655M2QH 1.1×0.9×0.5 max. 2.5 38 F6QG2G655P2KE 1.1×0.9×0.5 max. 2.5 52 100ohm. High Att. Band 8 Tx F5QA897M5M2AC 1.1×0.9×0.5 max. 2.3 18 Band 8 Rx F5QA942M5M2AW 1.1×0.9×0.5 max. 2.0 48 for LTE F5QG942M5P2KB 1.1×0.9×0.5 max. 2.2 56 100ohm output F5QG942M5P2KF 1.1×0.9×0.5 max. 2.2 60 100ohm output for LTE Band 12 Rx F5QA737M5M2QN 1.1×0.9×0.5 max. 1.6 53 F5QG737M5P2KK 1.1×0.9×0.5 max. 1.6 55 100ohm output Band 13 Tx F5QA782M0M2AZ 1.1×0.9×0.5 max. 1.5 56 Band 13 Rx F5QA751M0M2QM 1.1×0.9×0.5 max. 1.9 50 Band 14 F5QA763M0M2QL 1.1×0.9×0.5 max. 2.2 49 Band 17 Tx F5QA710M0M2AY 1.1×0.9×0.5 max. 1.3 33 Band 17 Rx F5QG740M0P2KH 1.1×0.9×0.5 max. 1.4 65 100ohm output Band 20 Rx F5QA806M0M2QE 1.1×0.9×0.5 max. 2.7 41 Band 21 Rx F6QA1G503M2QF 1.1×0.9×0.5 max. 2.0 52 Band 25 Tx F6QA1G882M2AS 1.1×0.9×0.5 max. 1.8 23 Band 26 Rx F5QA876M5M2QP 1.1×0.9×0.5 max. 2.2 49 F5QG876M5P2KQ 1.1×0.9×0.5 max. 2.2 59 100ohm output Band 28 Rx F5QA773M0M2QC 1.1×0.9×0.5 max. 2.1 52 Block A H F5QA788M0M2QB 1.1×0.9×0.5 max. 2.0 52 Block B IG BBBaaannnddd 332029 RRRxxx FFF665QQBAPA7212GG234M57554RMH226SJUSEW 111.1..11×××000.9..99×××000.4..554 mmmaaaxxx... 121...618 5--0 PRODUH FREQ Band 66 Rx F6BA2G155M6UU 1.1×0.9×0.44 max. 1.7 45 CU Band 67 Rx F5QA748M0M2WF 1.1×0.9×0.5 max. 1.5 - TSEN C ●W-CDMA / LTE Dual Filters Y 　System 　Part number Package Size［mm］ Insertion Loss［dB］ Attenuation［dB］ 　Remarks Band 3+1 Rx G6QN2G140M2RN 1.5×1.1×0.5 max. 2.0/1.7 40/52 For B1+B3 CA （Common Input） ●TDD Filters （TD-SCDMA / TD-LTE） 　System 　Part number Package Size［mm］ Insertion Loss［dB］ Attenuation［dB］ 　Remarks Band 34 TRx F6FC2G017H4PC 1.1×0.9×0.44 max. 1.1 - Input Power +29dBm (TDD:50% Duty) Band 34 Rx F6QP2G017R2SF 1.1×0.9×0.5 max. 1.3 - Bnad 38 Tx F6KA2G595A4VL 1.4×1.0×0.5 max. 1.5 - Input Power　+29dBm Bnad 38 Rx F6QA2G595M2QK 1.1×0.9×0.5 max. 1.9 - F6QB2G595P2BS 1.1×0.9×0.5 max. 2.0 - Balanced 100ohm Band 39 TRx F6FC1G900H4PB 1.1×0.9×0.44 max. 1.1 - Input power +29dBm (Duty 50%) Band 39 Rx F6QA1G900M2WD 1.1×0.9×0.5 max. 1.5 - Band 40 Tx F6HH2G350EH75 1.1×0.9×0.44 max. 1.4 - Input power +30.0dBm TD-LTE 40%duty 5MHz 1RB FBAR Band 40 Rx F6QA2G350M2QA 1.1×0.9×0.5 max. 2.2 - F6QB2G350P2BH 1.1×0.9×0.5 max. 2.8 - Balanced 100ohm Band 41 TRx F6KA2G605A4LA 1.4×1.0×0.5 max. 2.4 - Unbal High power design 2555-2655MHz BW100MHz Unbal High power design & HPUE F6FC2G600H4PA 1.1×0.9×0.44 max. 2.1 - for CMCC 2535-2655MHz BW120MHz Unbal Improved IL F6FC2G595H4PD 1.1×0.9×0.44 max. 1.7 - High power design & HPUE for CMCC 2535-2655MHz BW120MHz F6HP2G593AP20 2.0×1.6×0.6 max. 2.9 - Unbal High power design 2496-2690MHz BW194MHz FBAR Unbal High power design & HPUE F6HQ2G593AP31 1.8×1.4×0.57 max. 2.7 - for Sprint 2496-2690MHz BW194MHz FBAR ●TDD Dual Filters （TD-SCDMA / TD-LTE） 　System 　Part number Package Size［mm］ Insertion Loss［dB］ Attenuation［dB］ 　Remarks Band 34 + Band 39 TRx G6FT2G017G2YA 1.5×1.1×0.44 max. 1.3/1.4 - 1 IN / 3 OUT Band 39 + Band 34 H6FM2G595T2MZ 1.8×1.4×0.44 max. 1.3/1.4/2.7 - 1 IN / 3 OUT ＋Band 41 (BW120MHz) DRx Band 39 Rx + 41 (BW100MHz) B41 High power design B41 (2555-2655MHz BW100MHz) G6KJ2G605D4AB 1.8×1.4×0.5 max. 2.1/2.6 - TRx (Common Input) for CMCC CA Band 41 Rx + 39 (BW100MHz) G6QN2G605M2RM 1.5×1.1×0.5 max. 2.2/1.3 - DRx (Common Input) Band 41 (BW120MHz) Rx + 39Rx G6QN2G595M2RP 1.5×1.1×0.5 max. 2.3/1.3 - (Common Input) sawfilter_e-E08R01 ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) . 20 147

for General Electronic Equipment ■PARTS NUMBER ●GPS 　System 　Part number Package Size［mm］ Insertion Loss［dB］ Attenuation［dB］ 　Remarks GPS F6QA1G575H2JF 1.1×0.9×0.5 max. 0.96 - Low loss, High Att. GPS (GNSS) F6QA1G585M2AT 1.1×0.9×0.5 max. 1.4 - F6QB1G585P2BQ 1.1×0.9×0.5 max. 1.7 - 100ohm output GPS+GLONASS+Galileo+Compass F6QA1G581M2QZ 1.1×0.9×0.5 max. 1.4 - F6QA1G582H2JM 1.1×0.9×0.5 max. 1.8 - Ladder High Att. F6BG1G582R6TT 1.1×0.9×0.44 max. 1.7 - 100ohm output GNSS （L2+L5+B2） F6FC1G197H4PF 1.1×0.9×0.44 max. 1.3 - ●Others 　System 　Part number Package Size［mm］ Insertion Loss［dB］ Attenuation［dB］ 　Remarks ISM900 (B.W.26MHz) FAR-F5QA-915M00-M2AK 1.1×0.9×0.5 max. 1.8 - Wireless LAN / Bluetooth® F6KA2G436A4VE 1.4×1.0×0.5 max. 2.5 - 2400-2472MHz,+24dBm 2.5GHz High Att (for MTK) F6KA2G466A4VJ 1.4×1.0×0.5 max. 2.8 - 2432-2500MHz,+24dBm 2.3GHz High Att (for MTK) F6HG2G441EG65 1.1×0.9×0.5 max. 1.3 - FBAR F6HG2G441EG66 1.1×0.9×0.5 max. 1.3 - High Att. @2.38GHz FBAR F6FC2G441H4PE 1.1×0.9×0.44 max. 1.0 - SAW H IG PH RO F DRE UQ CU TE SN C Y sawfilter_e-E08R01 ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) . 148 20

FBAR/SAW DEVICES for MOBILE COMMUNICATIONS ■PACKAGING ①Minimum Quantity Code & Quantity [pcs] Type Size [mm] Standard Option 2.0×1.6 Y 15000 Z 3000 Duplexer 1.8×1.4 Y 15000 Z 3000 Quadplexer 2.5×2.0 U 10000 Z 3000 Triplexer 2.5×2.0 U 10000 Z 3000 2.0×1.6 Y 15000 Z 3000 1.8×1.4 Y 15000 Z 3000 Single Filter 1.4×1.0 Y 15000 Z 3000 1.1×0.9 X 10000 Y 15000 J 5000 1.8×1.4 Y 15000 Z 3000 Dual Filter 1.5×1.1 Y 15000 J 5000 Triple Filter 1.8×1.4 Y 15000 Z 3000 ②Tape material g ●Taping dimensions Type Size[mm] a b c d e f g 2.0×1.6 2.4±0.1 2.0±0.1 1.05±0.05 1.5+0.1/－0 0.90－0.05 0.25±0.05 4.0±0.1 Duplexer 1.8×1.4 2.2±0.1 1.8±0.1 0.5±0.05 1.55±0.05 0.8±0.1 0.30±0.05 4.0±0.1 Quadplexer 2.5×2.0 2.8±0.1 2.3±0.1 1.5+0.1/－0 1.5+0.1/－0 1.0+0.1/－0.0 0.25±0.05 4.0±0.1 Triplexer 2.5×2.0 2.8±0.1 2.3±0.1 1.5+0.1/－0 1.5+0.1/－0 1.0+0.1/－0.0 0.25±0.05 4.0±0.1 2.0×1.6 2.4±0.1 2.0±0.1 1.05±0.05 1.5+0.1/－0 0.90－0.05 0.25±0.05 4.0±0.1 1.8×1.4 2.2±0.1 1.8±0.1 0.5±0.05 1.55±0.05 0.8±0.1 0.30±0.05 4.0±0.1 Single Filter 1.4×1.0 1.7±0.1 1.3±0.1 0.5±0.05 1.5+0.1/－0 0.63±0.05 0.20±0.05 4.0±0.1 1.1×0.9 1.3±0.1 1.1±0.1 0.5±0.05 1.55±0.05 0.63±0.05 0.20±0.05 2.0±0.05 1.8×1.4 2.2±0.1 1.8±0.1 0.5±0.05 1.55±0.05 0.8±0.1 0.30±0.05 4.0±0.1 Dual Filter 1.5×1.1 1.8±0.1 1.4±0.1 0.5±0.05 1.5+0.1/－0 0.7±0.1 0.25±0.05 4.0±0.1 Triple Filter 1.8×1.4 2.2±0.1 1.8±0.1 0.5±0.05 1.55±0.05 0.8±0.1 0.30±0.05 4.0±0.1 単位：mm ●Material of Tape（Conductive） Tape : Polystyrene Top cover tape : Polyethylene terephthalate（PET）and Polyethylene ③Top Tape Strength The top tape requires a peel-off force of 0.1 to 1.0N in the direction of the arrow as illustrated below. ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . sawfilter_pack_e-E08R01

④Reel size ●Material of Reel Material : Polystyrene＋Carbon Characteristics : Conform to EIAJ-ET-7200A Color : Black Surface resistance（reference value） :109Ω/sq Max. Code Quantity A B C W1 W2 X 10,000 pcs φ180.0 +0.0/－1.5 φ66.0 ±0.5 φ13.0 ±0.2 9.0 +1.0/－0.0 11.4 ±1.0 U 10,000 pcs φ180.0 +0.0/－1.5 φ66.0 ±0.5 φ13.0 ±0.2 9.0 +1.0/－0.0 11.4 ±1.0 Y 15,000 pcs φ330.0 ±2.0 φ100.0 ±1.0 φ13.0 ±0.2 9.4 ±1.0 13.4 ±1.0 J 5,000 pcs φ180.0 +0.0/－1.5 φ66.0 ±0.5 φ13.0 ±0.2 9.0 +1.0/－0.0 11.4 ±1.0 Z 3,000 pcs φ180.0 +0.0/－1.5 φ66.0 ±0.5 φ13.0 ±0.2 9.0 +1.0/－0.0 11.4 ±1.0 Unit：mm ⑤Reel label and Reel C-Label sticking and Winding method ●Surface ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . sawfilter_pack_e-E08R01

FBAR/SAW DEVICES for MOBILE COMMUNICATIONS ■RELIABILITY DATA 1. Terminal stregth Specified Value No damage to be found. Bend width 4mm, hold for 5±1 sec. Test Methods and Remarks 2. Mechanical shock Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Apply 14700m/s2 for 0.5ms 5 times for each of 6 directions. Remarks 3. Vibration Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and With 1.5 mm of whole amplitude at 10 to 55 Hz of frequency, and 98m/s2 of acceleration at 55 to 500Hz, apply a Remarks vibration for 2 hours for each of 3 directions, period is 15 minutes(10 to 500 to 10Hz) 4. Drop 1 Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Drop 3 times onto concrete floor from the height of 1.0m. Remarks 5. Drop 2 Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Drop with 150g weight 3 times in each 6 direction onto concrete floor from the height of 1.8m. Remarks 6. Temperature cycling Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Temp. range －40 to ＋100℃. 500cycle. Remarks ７. Static humidity Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and SAW : ＋85℃, 90% to 95%RH, apply DC5V, 1000hours. Remarks FBAR : ＋85℃, 90% to 95%RH, apply DC0V, 1000hours. 8. High temperature storage life Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and ＋100℃, 1000hours. Remarks 9. Low temperature storage life Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and －40℃, 1000hours. Remarks ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . sawfilter_reli_e-E08R01

10. High Temperature Bias Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Please refer to individual specifications in detail. Remarks 11. Solderbility More than 90% of area of terminals to be covered with the solder. Specified Value A change of the remarkable appearance do not have it. Test Methods and Lead-free Solder paste, Reflow；Peak temperature 245℃ Remarks 12. Solder heat resistance After testing, meet the specified characteristics at a room temperature. Specified Value A change of the remarkable appearance do not have it. ◆Recommended temperature profile of reflow soldering Figure shows recommended temperature profile of reflow soldering in the case of lead-free solder alloy Sn3.0Ag0.5Cu. Suitable condition for solder heating is differed depending on composition and manufacturing method. Please contact to solder manufacturer for the details. Test Methods and Remarks ※ According to JIS(IEC) standard. ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . sawfilter_reli_e-E08R01

FBAR/SAW DEVICES for MOBILE COMMUNICATIONS ■PRECAUTIONS 1. Storage conditions ◆Storage 1. To maintain the solderability of terminal electrodes and to keep the packaging material in good condition, care must be taken to control temperature and humidity in the storage area. Humidity should especially be kept as low as possible. ・ Recommended conditions Ambient temperature : －5～＋40℃ Precautions Humidity : 40～85%RH The ambient temperature must be kept below 30℃. Even under ideal storage conditions, the solderbility of electrodes decreases gradually, so filters should be mounted within 1 year from the time of delivery. ・ The packaging material should be kept where no chlorine or sulfur exists in the air. ◆Storage Technical 1. If the parts are stocked in a high temperature and humidity environment, problems such as reduced solderability caused by oxidation of considerations terminal electrodes and deterioration of taping/ packaging materials may take place. For this reason, components should be used within 1 year from the time of delivery. If exceeding the above period, please check the solderability before using the filter. ■ Please contact our sales offices for further details of specifications. All of the standard values listed here are subject to change without notice. Therefore, please check the specifications carefully before use. ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . sawfilter_prec_e-E08R01

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: T aiyo Yuden: D6HH1G960BH95-Z D6NF1G960P1BR-Z F5KY878M0B4ND-Z F5QB881M5P2BG-J F6KA2G535L4AM-Z F6KY1G960B4NF-Z D6PF1G960M3B6-Z F6QG2G140P2KA-J D6JG2G132D3GZ-Z F5QG881M5P2KG-J F5QG942M5P2KB-J F6QB1G585P2BQ-J F5KY-751M00-B4UQ-Z F6KA2G436A4VE-Z D6PE1G960P3BY-Z F5QA836M5M2AR-J F6QA1G950M2AA-J F6QA1G960M2AP-J F5QA897M5M2AC-J D5PF782M0M3P9-Z D6PF2G132M3D9-Z F6QA1G581M2QZ-J F6BG1G582R6TT-J D6DA1G842K2C4-Z D6DA2G140K2A7-Z D5DA942M5K2S2-Z D6DA2G132K2D9-Z D6HQ1G962DP39-Z D5PF740M0M3R9-Z F5QA737M5M2QN-J F6KA2G466A4VJ-Z D5DA881M5K2E4-Z D5PE876M5P3UZ-Z D5PF773M0M3Y6-Z D6HL1G962DL39-Z D6HL2G655DL06-Z D6HN2G655BN54-Z D6PE1G503P3KW-Z D6PE2G140P3AW-Z D6RB2G132E1DF-Z D6RB2G140E1AL-Z F5QA710M0M2AY-J F5QA773M0M2QC-J F5QA788M0M2QB-J F5QG740M0P2KH-J F5QG876M5P2KQ-J F5QG942M5P2KF-J F6HF2G350AF41-Z F6HP2G593AP20-Z F6KA2G605A4LA-Z F6QA1G503M2QF-J F6QA1G882M2AS-J F6QA2G595M2QK-J F6QB2G595P2BS-J F6QG1G842P2KD-J F5QA876M5M2QP-J F5QA751M0M2QM-J D5DA876M5K2P6-Z D6DA2G132K2D4-Z D5PF876M5M3U9-Z F6HQ2G593AP31-Z G6QN2G017M2RF-J D6HQ2G655DP02-Z D6DA1G960K2B2-Z F6FC1G900H4PB-J F6QA2G655M2QH-J F6FC2G600H4PA-J G6QN2G605M2RM-J D6HQ1G962DP35-Z D6RB1G960E1HB-Z F5KA707M5D4JW-Z F5KA833M0D4DU-Z F6KB2G350B4HT-Z D5NE782M0P1D6-Z D6HL2G655DL09-Z F6KA1G581D4JR-Z F5KA942M5D4MYBZ F6KA2G595A4VL-Z F6QB1G960P2BK-J D5DA737M5K2H2-Z D5DA782M0K2J6-Z D6HQ2G655DP01-Z G6QL2G140M2PA-J D5PF788M0M3Y9-Z D5RB942M5E1CF-Z D6DA2G140K2A4-Z D6PE2G132P3DWBZ D6RB2G140E1AJ-Z G5QT942M5N2VA-J G6QC1G960N2CH-J G6QD1G960N2DY-J G6QE1G960N2EE-J G6QE2G595N2EJ-J G6QH2G140N2LP-J G6QJ2G017M2MD-J G6QN2G017M2RD-J D6HK1G960DK12-Z D6NH1G960M1Z6-Z F6QG2G655P2KE-J G5QH942M5N2LN-J