Datasheet for part number CA07A20-4PB Our Catalog Part Number: CA07A20-4P-B Brand: Cannon Product Category: Circular Product Line: CA Bayonet Series: CA BAYONET Product Datasheet Bayonet Connector with bayonet coupling Shell Style Jam nut receptacle Gender Pin Shell Size 20 Contact Arrangement 20-4 Number of contacts 4 contacts size 12 Contact Type Solder Cup Contact Plating Hard silver Contacts installed yes Shielding no Contact Rating at +20 °C (68 °F) 41 A (Size 25/12) Contact Resistance (Size 25/12) 3 mΩ In case of voltages greater than 50V the connector Operating Voltage must be used in accordance with DIN VDE part 410, IEC 60364-4-41. Acc. To VG95319, part 2, test no. 5.12 Insulator Resistance and VG95210, part 32, test conditions B, standard insulator material > 1000 MΩ Test Voltage 2500 Vrms Air and Creepage Paths (Min) 2,8 mm Standard insulator material -55°/+125°C Ambient Temperature (-67/257°F) IP67 and IP68 (1 bar pressure after 12 hrs) acc. to Safety Provisions DIN 40 050 Salt Spray Resistance 500 hours salt spray resistant Mating Cycles 500 min Sep. Force per Contact (Size 25/12) 1,5 N For infos on Gage please see catalog Gage VG95234, part 1 Coupling Torque Closing: 9 Nm max / Opening: 0,7 Nm min Contact Retention (Size 25/12) 55 N Shell Material Aluminium alloy Olive drab chromate over cadmium plating Shell Plating (conductive) Insulator and Grommet Material CR-Elastomere Contact Material Copper alloy Harnessing Info: Contact Cross-Section See assembly instruction Harnessing Info: Insulator Diameter See assembly instruction Wire Stripping (Size 25/12) 6,2 mm All tests in accordance with VG95319 and/or if General Info applicable with VG95210 Specifications and dimensions subject to change. Page 1 of 1