Future Technology Devices International Ltd C232HM USB 2.0 Hi-Speed to MPSSE Cable Datasheet Document Reference No.: FT_000401 Version 1.2.1 Issue Date: 2016-05-05 Future Technology Devices International Limited (FTDI) Unit 1, 2 Seaward Place, Glasgow G41 1HH, United Kingdom Tel.: +44 (0) 141 429 2777 Fax: + 44 (0) 141 429 2758 E-Mail (Support): support1@ftdichip.com Web: http://www.ftdichip.com Use of FTDI devices in life support and/or safety applications is entirely at the user’s risk, and the user agrees to defend, indemnify and hold harmless FTDI from any and all damages, claims, suits or expense resulting from such use. © Copyright Future Technology Devices International Ltd

Document Reference No.: FT_000401 USB 2.0 HI-SPEED TO MPSSE CABLE Datasheet Version 1.2.1 Clearance No.: FTDI# 214 1 Description The USB 2.0 Hi-Speed to MPSSE cable contains a small internal electronic circuit board, utilising the FTDI FT232H, which is encapsulated into the USB connector end of the cable, this handles all the USB signalling and protocols. The cable provides a fast, simple way to connect devices with 3.3 Volt digital interfaces to USB. For full details of the IC, consult the FT232H datasheet, this is available from DS_FT232H. The integrated FT232H device incorporates a command processor called the Multi-Protocol Synchronous Serial Engine (MPSSE). The purpose of the MPSSE command processor is to communicate with devices which use synchronous protocols (such as JTAG, SPI or I2C) in an efficient manner. Full details are available in the MPSSE application note - AN_108. The cable is terminated by ten individual wires with single pole connectors which can be interfaced to a male header. Cable signals are compliant with CMOS logic at 3.3 volts. The FT232H is a single channel USB 2.0 Hi-Speed (480Mb/s) to UART/FIFO IC. It can be configured in a variety of industry standard serial or parallel interfaces, such as MPSSE - JTAG, SPI, I2C. The C232HM MPSSE cable is easily configured into each interface e.g. JTAG, SPI, I2C via the application software. The cable is powered from a USB host port and is USB 2.0 Hi-Speed compatible. The cable is 0.5m long and supports a data transfer up to 30Mbps in MPSSE mode. The C232HM MPSSE cable requires USB device drivers, available free from http://www.ftdichip.com. The D2XX driver is used with application software to directly access the FT232H in the cable though a DLL. This is illustrated in the Figure 1-1 The C232HM MPSSE cable uses the FTDI’s FT232H USB to serial IC device. Connector C232HM API 10 Female pin D D L 2 headers L X USB X Software application access to USB via D2XX Figure 1-1 Using the C232HM MPSSE Cable Copyright © Future Technology Devices International Limited 1

Document Reference No.: FT_000401 USB 2.0 HI-SPEED TO MPSSE CABLE Datasheet Version 1.2.1 Clearance No.: FTDI# 214 1.1 Available Cables and Part Numbers The following Table 1.1 gives details of the available C232HM MPSSE cables. Part Number Description End Connector Cable details USB to MPSSE cable with +3.3V digital level signals. Maximum 10 core, UL2464 24 AWG, Single pole, C232HM-DDHSL-0 output of 250mA @ 3.3VDC on diam=6.5mm receptacle x 10 VCC (see Note 1) USB to MPSSE cable with +3.3V digital level signals. Maximum 10 core, UL2464 24 AWG, Single pole, C232HM-EDHSL-0 output of 450mA @ 5.0VDC on diam=6.5mm receptacle x 10 VCC (see Note 2) Table 1.1 C232HM MPSSE Cable Descriptions and Part Numbers Note 1: The VCC power output signal (RED wire) is 3.3V. The source of 3.3V is the onboard regulator output, which is switched onto the power output signal. Note 2: The VCC power output signal (RED wire) is 5.0V. The source of 5.0V is the USB VBUS input, which is switched onto the power output signal. FTDI supports customised end connector designs. For more information, please contact your local FTDI sales office (see end of datasheet for contact details). 1.2 Certifications The FTDI C232HM MPSSE cables are fully RoHS compliant. At the time of writing this datasheet the cables were being CE and FCC tested. 1.3 USB Compliant The FTDI C232HM MPSSE cables are fully compliant with the USB 2.0 specification and have been given the USB-IF Test-ID (TID) 10820025. Copyright © Future Technology Devices International Limited 2

Document Reference No.: FT_000401 USB 2.0 HI-SPEED TO MPSSE CABLE Datasheet Version 1.2.1 Clearance No.: FTDI# 214 Table of Contents 1 Description ..................................................................................... 1 1.1 Available Cables and Part Numbers ............................................................... 2 1.2 Certifications ................................................................................................. 2 1.3 USB Compliant .............................................................................................. 2 2 Typical Applications ........................................................................ 4 2.1 Driver Support .............................................................................................. 4 2.2 Features ........................................................................................................ 5 3 C232HM MPSSE Cable connection and Mechanical Details .............. 6 3.1 C232HM MPSSE Cable Signal Descriptions .................................................... 7 3.2 C232HM MPSSE Cable Signal Descriptions .................................................... 8 3.3 C232HM MPSSE Cable Electrical Parameters ................................................. 9 3.3.1 C232HM-DDHSL-0 Electrical Parameters ..................................................... 9 3.3.2 C232HM-EDHSL-0 Electrical Parameters ....................................................... 9 3.3.1 C232HM-DDHSL-0 and C232HM-EDHSL-0 I/O Characteristics ........................10 4 Cable PCB Circuit Schematic ......................................................... 11 5 Contact Information ..................................................................... 13 Appendix A - Cable EEPROM Configuration ......................................... 14 Appendix B - List of Figures and Tables ............................................. 15 Appendix C – Revision History ........................................................... 16 Copyright © Future Technology Devices International Limited 3

Document Reference No.: FT_000401 USB 2.0 HI-SPEED TO MPSSE CABLE Datasheet Version 1.2.1 Clearance No.: FTDI# 214 2 Typical Applications  USB to JTAG interfaces  Rapid USB integration into existing  USB to SPI interfaces electronic systems  USB to I2C interfaces  Prototyping platform for USB interface on  Interfacing MCU / PLD / FPGA based new systems designs to USB  USB Instrumentation  USB Audio and Low Bandwidth Video data transfer 2.1 Driver Support Royalty free VIRTUAL COM PORT Royalty free D2XX Direct Drivers (VCP) DRIVERS for... (USB Drivers + DLL S/W Interface)  Microsoft Windows 10 32,64-bit  Microsoft Windows 10 32,64-bit  Microsoft Windows 8/8.1 32,64-bit  Microsoft Windows 8/8.1 32,64-bit  Microsoft Windows 7 32,64-bit  Microsoft Windows 7 32,64-bit  Microsoft Windows 2000, Server 2003, XP and  Microsoft Windows 2000, Server 2003, XP and Server 2008 Server 2008  Microsoft Windows XP and XP 64-bit  Microsoft Windows XP and XP 64-bit  Microsoft Windows Vista and Vista 64-bit  Microsoft Windows Vista and Vista 64-bit  Microsoft Windows CE 4.2, 5.0 and 6.0  Microsoft Windows CE 4.2, 5.0 and 6.0  Apple Mac OS-X Linux 2.6.32 or later  Linux 2.6.39 or later The drivers listed above are all available to download for free from http://www.ftdichip.com. Various Third-Party Drivers are also available for various other operating systems - see http://www.ftdichip.com/Support/Links.htm for details. Copyright © Future Technology Devices International Limited 4

Document Reference No.: FT_000401 USB 2.0 HI-SPEED TO MPSSE CABLE Datasheet Version 1.2.1 Clearance No.: FTDI# 214 2.2 Features  Based on the Single chip USB Hi-Speed  Transmit and receive LED drive signals FT232H device  Adjustable receive buffer timeout  USB 2.0 Hi-Speed (480Mbits/Second) and  Support for USB suspend and resume Full Speed (12Mbits/Second) compatible  Low operating and USB suspend current  Entire USB protocol handled on the chip – No USB-specific firmware programming  Low USB bandwidth consumption required  UHCI / OHCI / EHCI host controller  USB Type A connector for direct connection compatible to a host or hub  -40°C to +85°C operating temperature  USB bus powered range  Fully assisted hardware or X-On / X-Off  Cable length is 0.5m (19.7 inch) software handshaking  Custom versions also available (subject to  Synchronous Serial (MPSSE) data rates of Minimum Order Quantity (MOQ)) up to 30Mbps on JTAG, SPI and I2C  FTDI’s royalty-free D2XX drivers eliminate  1kByte receive and transmit buffers for the requirement for USB driver high data throughput development in most cases Copyright © Future Technology Devices International Limited 5

Document Reference No.: FT_000401 USB 2.0 HI-SPEED TO MPSSE CABLE Datasheet Version 1.2.1 Clearance No.: FTDI# 214 3 C232HM MPSSE Cable connection and Mechanical Details The following Figure 3-1 shows the cable signals and the wire colours for these signals on the C232HM MPSSE cable. 1 VCC 1 RED 2 TCK 2 ORANGE TDI 3 3 YELLOW TD0 4 4 GREEN TMS 5 CABLE 0.5m 5 BROWN GPIOL0 6 6 GREY GPIOL1 7 7 PURPLE GPIOL2 8 8 WHITE 9 GPIOL3 9 BLUE 10 GND 10 BLACK Figure 3-1 C232HM MPSSE Cable Connections (numbers refer to pad numbers on the PCB) Copyright © Future Technology Devices International Limited 6

Document Reference No.: FT_000401 USB 2.0 HI-SPEED TO MPSSE CABLE Datasheet Version 1.2.1 Clearance No.: FTDI# 214 3.1 C232HM MPSSE Cable Signal Descriptions 61 5 2. 4 Figure 3-2 C232HM MPSSE Cable Mechanical Details (dimensions in mm) Copyright © Future Technology Devices International Limited 7

Document Reference No.: FT_000401 USB 2.0 HI-SPEED TO MPSSE CABLE Datasheet Version 1.2.1 Clearance No.: FTDI# 214 3.2 C232HM MPSSE Cable Signal Descriptions Pin Colour Name Type Description Number Red 1 VCC Output Power Supply Output to target board. Gray 6 GPIOL0 Input/Output General Purpose input/output. Purple 7 GPIOL1 Input/Output General Purpose input/output. White 8 GPIOL2 Input/Output General Purpose input/output. Blue 9 GPIOL3 Input/Output General Purpose input/output. Black 10 GND GND Device ground supply pin. Table 3.1 Common Cable Signal Descriptions Pin Colour Name Type Description Number Orange 2 TCK Output Test Interface Clock Yellow 3 TDI Input Test Data Input Green 4 TDO Output Test Data Output Brown 5 TMS Output Test Mode Select Table 3.2 MPSSE Option JTAG - Signal Descriptions Pin Colour Name Type Description Number Orange 2 SK Output Serial Clock Yellow 3 DO Output Serial data output Green 4 DI Input Serial Data Input Brown 5 CS Output Serial Chip Select Table 3.3 MPSSE Option SPI - Signal Descriptions Pin Colour Name Type Description Number Orange 2 SCL Output Serial Clock Yellow 3 Serial data signal shorted together to create SDA Input/Output bidirectional data(both yellow and green wires need to 4 Green be shorted together) Table 3.4 MPSSE Option I2C - Signal Descriptions Copyright © Future Technology Devices International Limited 8

Document Reference No.: FT_000401 USB 2.0 HI-SPEED TO MPSSE CABLE Datasheet Version 1.2.1 Clearance No.: FTDI# 214 3.3 C232HM MPSSE Cable Electrical Parameters 3.3.1 C232HM-DDHSL-0 Electrical Parameters Parameter Description Minimum Typical Maximum Units Conditions VCC Output Power Voltage 3.2 3.3 3.6 V I Output Power Current - - 250 mA O Operating Temperature T -40 +85 oC Range Table 3.5 C232HM-DDHSL-0 Operating Parameters 3.3.2 C232HM-EDHSL-0 Electrical Parameters Parameter Description Minimum Typical Maximum Units Conditions VCC Output Power Voltage 4.75 5 5.25 V Must be less that 2.5mA I Supply Current - - 450 mA O during suspend. Operating Temperature T -40 +85 oC Range Table 3.6 C232HM-EDHSL-0 Power Supply Output Parameters Copyright © Future Technology Devices International Limited 9

Document Reference No.: FT_000401 USB 2.0 HI-SPEED TO MPSSE CABLE Datasheet Version 1.2.1 Clearance No.: FTDI# 214 3.3.1 C232HM-DDHSL-0 and C232HM-EDHSL-0 I/O Characteristics Parameter Description Minimum Typical Maximum Units Conditions Ioh = +/-2mA Voh Output Voltage High 2.40 3.14 V I/O Drive strength* = 4mA 3.20 V I/O Drive strength* = 8mA I/O Drive strength* = 3.22 V 12mA I/O Drive strength* = 3.22 V 16mA Iol = +/-2mA Vol Output Voltage Low 0.18 0.40 V I/O Drive strength* = 4mA 0.12 V I/O Drive strength* = 8mA I/O Drive strength* = 0.08 V 12mA I/O Drive strength* = 0.07 V 16mA Input low Switching Vil - 0.80 V LVTTL Threshold Input High Switching Vih 2.00 - V LVTTL Threshold Vt Switching Threshold 1.50 V LVTTL Schmitt trigger negative Vt- 0.80 1.10 - V going threshold voltage Schmitt trigger positive Vt+ 1.60 2.00 V going threshold voltage Rpu Input pull-up resistance 40 75 190 KΩ Vin = 0 Input pull-down Rpd 40 75 190 KΩ Vin =VCCIO resistance Iin Input Leakage Current 15 45 85 μA Vin = 0 Tri-state output leakage Ioz ±10 μA Vin = 5.5V or 0 current Table 3.7 C232HM-DDHSL-0 and C232HM-EDHSL-0 I/O Pin Characteristics * The I/O drive strength and slow slew-rate are configurable in the EEPROM. The I/O pins are +3.3v cells, which are +5V tolerant Copyright © Future Technology Devices International Limited 10

Document Reference No.: FT_000401 USB 2.0 HI-SPEED TO MPSSE CABLE Datasheet Version 1.2.1 Clearance No.: FTDI# 214 4 Cable PCB Circuit Schematic The circuit schematics for the small internal electronic circuit board, utilising the FTDI FT232H, which is encapsulated into the USB connector end of the cable, are shown in Figure 4.1 Circuit Schematic of C232HM-DDHSL-0 and Figure 4.2 - Circuit Schematic of PCB - C232HM-EDHSL-0. Customised versions of these cables are also available. Users interested in customised versions of these cables should contact FTDI sales (sales1@ftdichip.com). Figure 4.1 Circuit Schematic of C232HM-DDHSL-0 Copyright © Future Technology Devices International Limited 11

Document Reference No.: FT_000401 USB 2.0 HI-SPEED TO MPSSE CABLE Datasheet Version 1.2.1 Clearance No.: FTDI# 214 Figure 4.2 - Circuit Schematic of PCB - C232HM-EDHSL-0 Copyright © Future Technology Devices International Limited 12

Document Reference No.: FT_000401 USB 2.0 HI-SPEED TO MPSSE CABLE Datasheet Version 1.2.1 Clearance No.: FTDI# 214 5 Contact Information Head Office – Glasgow, UK Branch Office – Tigard, Oregon, USA Future Technology Devices International Limited Unit 1, 2 Seaward Place, Centurion Business Park Future Technology Devices International Limited Glasgow G41 1HH (USA) United Kingdom 7130 SW Fir Loop Tel: +44 (0) 141 429 2777 Tigard, OR 97223 Fax: +44 (0) 141 429 2758 USA Tel: +1 (503) 547 0988 E-mail (Sales) sales1@ftdichip.com Fax: +1 (503) 547 0987 E-mail (Support) support1@ftdichip.com E-mail (General Enquiries) admin1@ftdichip.com E-Mail (Sales) us.sales@ftdichip.com E-Mail (Support) us.support@ftdichip.com E-Mail (General Enquiries) us.admin@ftdichip.com Branch Office – Taipei, Taiwan Branch Office – Shanghai, China Future Technology Devices International Limited (Taiwan) Future Technology Devices International Limited 2F, No. 516, Sec. 1, NeiHu Road (China) Taipei 114 Room 1103, No.666 West Huaihai Road, Taiwan , R.O.C. Shanghai, 200052 Tel: +886 (0) 2 8797 1330 China Fax: +886 (0) 2 8751 9737 Tel: +86 21 62351596 Fax: +86 21 62351595 E-mail (Sales) tw.sales1@ftdichip.com E-mail (Support) tw.support1@ftdichip.com E-mail (Sales) cn.sales@ftdichip.com E-mail (General Enquiries) tw.admin1@ftdichip.com E-mail (Support) cn.support@ftdichip.com E-mail (General Enquiries) cn.admin@ftdichip.com Web Site http://ftdichip.com Distributor and Sales Representatives Please visit the Sales Network page of the FTDI Web site for the contact details of our distributor(s) and sales representative(s) in your country. System and equipment manufacturers and designers are responsible to ensure that their systems, and any Future Technology Devices International Ltd (FTDI) devices incorporated in their systems, meet all applicable safety, regulatory and system-level performance requirements. All application-related information in this document (including application descriptions, suggested FTDI devices and other materials) is provided for reference only. While FTDI has taken care to assure it is accurate, this information is subject to customer confirmation, and FTDI disclaims all liability for system designs and for any applications assistance provided by FTDI. Use of FTDI devices in life support and/or safety applications is entirely at the user’s risk, and the user agrees to defend, indemnify and hold harmless FTDI from any and all damages, claims, suits or expense resulting from such use. This document is subject to change without notice. No freedom to use patents or other intellectual property rights is implied by the publication of this document. Neither the whole nor any part of the information contained in, or the product described in this document, may be adapted or reproduced in any material or electronic form without the prior written consent of the copyright holder. Future Technology Devices International Ltd, Unit 1, 2 Seaward Place, Centurion Business Park, Glasgow G41 1HH, United Kingdom. Scotland Registered Company Number: SC136640 Copyright © Future Technology Devices International Limited 13

Document Reference No.: FT_000401 USB 2.0 HI-SPEED TO MPSSE CABLE Datasheet Version 1.2.1 Clearance No.: FTDI# 214 Appendix A - Cable EEPROM Configuration Each C232HM MPSSE cable is controlled by the FTDI FT232H IC. This FT232H device contains an EEPROM which contains the USB configuration descriptors for that device. When the cable is plugged into a PC or a USB reset is performed, the PC will read these descriptors. The default values stored into the internal EEPROM are defined in the following table Parameter Value Notes USB Vendor ID (VID) 0403h FTDI default VID (hex) USB Product UD (PID) 6014h FTDI default PID (hex) Serial Number Enabled? Yes A unique serial number is generated and programmed into Serial Number See Note the EEPROM during device final test. Manufacturer Name FTDI Product description depends on the cable. The following lists a the Product descriptions for each different cable. Product Description See note C232HM-VSW3V3 C232HM-VSW5V0 Includes power available from the cable plus power Max Bus Power Current 500mA required for the FT232H Power Source Bus Powered Device Type FT232H Returns USB 2.0 device description to the host. USB Version 0200 Note: The device is a USB 2.0 Hi-Speed device (480Mb/s). Remote Wake Up Disabled 500uA suspend limit when in this state High Current I/Os Enabled Enables the high drive level on the CBUS I/O pins. Invert TXD Disabled Signal on this pin becomes TXD# if enable. Invert RXD Disabled Signal on this pin becomes RXD# if enable. Invert RTS# Disabled Signal on this pin becomes RTS if enable. Invert CTS# Disabled Signal on this pin becomes CTS if enable. Default Internal EEPROM Configuration The internal EEPROM in the cable can be re-programmed over USB using the utility program FT_PROG. Both can be downloaded from www.ftdichip.com. Copyright © Future Technology Devices International Limited 14

Document Reference No.: FT_000401 USB 2.0 HI-SPEED TO MPSSE CABLE Datasheet Version 1.2.1 Clearance No.: FTDI# 214 Appendix B - List of Figures and Tables List of Figures Figure 1-1 Using the C232HM MPSSE Cable ................................................................ 1 Figure 3-1 C232HM MPSSE Cable Connections (numbers refer to pad numbers on the PCB) ........................................................................................................................... 6 Figure 3-2 C232HM MPSSE Cable Mechanical Details (dimensions in mm) ................ 7 Figure 4.1 Circuit Schematic of C232HM-DDHSL-0 .................................................... 11 Figure 4.2 - Circuit Schematic of PCB - C232HM-EDHSL-0 ........................................ 12 List of Tables Table 1.1 C232HM MPSSE Cable Descriptions and Part Numbers ................................ 2 Table 3.1 Common Cable Signal Descriptions ............................................................. 8 Table 3.2 MPSSE Option JTAG - Signal Descriptions ................................................... 8 Table 3.3 MPSSE Option SPI - Signal Descriptions ...................................................... 8 Table 3.4 MPSSE Option I2C - Signal Descriptions ...................................................... 8 Table 3.5 C232HM-DDHSL-0 Operating Parameters .................................................. 9 Table 3.6 C232HM-EDHSL-0 Power Supply Output Parameters ................................. 9 Table 3.7 C232HM-DDHSL-0 and C232HM-EDHSL-0 I/O Pin Characteristics ............. 10 Copyright © Future Technology Devices International Limited 15

Document Reference No.: FT_000401 USB 2.0 HI-SPEED TO MPSSE CABLE Datasheet Version 1.2.1 Clearance No.: FTDI# 214 Appendix C – Revision History Document Title: C232HM Document Reference No.: FT_000401 Clearance No.: FTDI# 214 Product Page: http://www.ftdichip.com/Products/Cables/USBMPSSE.htm Document Feedback: Send Feedback Version 1.0 First Release 21st July 2011 Version 1.1 Updated schematic to give correct the 14th March 2012 correct part number for the fuse, and correct current limits in Table1.1. Updated section 1.1, Linux Version Version 1.2 Added section 1.2 and 1.3 06th June 2012 (CE&FCC test and USB Compliant – TID number) Version 1.2.1 Corrected the typo data in table 3.5 and table3.6 14th May 2016 Copyright © Future Technology Devices International Limited 16

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: F TDI: C232HM-DDHSL-0 C232HM-EDHSL-0