3M™ Pin Strip Header .100”, .295” Mating Length, Straight & Right Angle, Solder Tails 929 Series • Stackable • Tin Lead or gold plating available • Solder stand-offs facilitate production wave soldering • Board pin retention feature available • See Regulatory Information Appendix (RIA) for chemical compliance information Date Modified: August 18, 2008 TS-0768-B Sheet 1 of 3 Physical Insulation: Material: Glass Filled Polyester (PBT) or High Temperature PCT Flammability: UL 94V-0 Color: Black Contact: Material: Copper Alloy Plating: Underplating: 50 μ” [1.27 μm] Nickel Wiping Area and Solder Tails: See ordering information Marking: None Electrical Current Rating: 2.5 A Insulation Resistance: > 5 × 109 Ω at 500 V DC Withstanding Voltage: 1500 V at Sea Level RMS Environmental Temperature Rating: -40°C to +105°C Process Rating: 260°C (per J-STD-020C) for PCT insulator parts only (PBT insulator version), maximum insulator temperature 191°C, (Wave Solder Process Only) Moisture Sensitivity Level: 1 (per J-STD-020C) PCT insulator version only UL File No.: E68080 3 3M is a trademark of 3M Company. Electronic Solutions Division For technical, sales or ordering information call Interconnect Solutions 800-225-5373 http://www.3M.com/interconnects/

3M™ Pin Strip Header .100”, .295” Mating Length, Straight & Right Angle, Solder Tails 929 Series Straight A See Note 2X .05 Max .096 [2.44] [1.27] .295 .110 [2.79] [ 7.49 ] .048 [1.22] .130(cid:0)(cid:112)(cid:0).015 .015 [0.38] [ 3.30 ] .100 Typ [2.54] .025(cid:0)(cid:112)(cid:0).001 Sq Typ C [0.64] Inch (cid:133)(cid:0).040(cid:0)(cid:112)(cid:0).003 After Plating [mm] [1.02] Tolerance Unless Noted .0 .00 .000 inch ±.1 ±.01 ±.005 [ ] Dimensions for Reference only .100(cid:0)(cid:112)(cid:0).003 [2.54] Recommended Hole Pattern Note: A = .10” [2.5] × pin quantity per row. Dimension A is a maximum when the pin strip is cut to length, not when the strip is broken to length. Ordering Information Tin Gold 9X9400-01-XX-XX 9X9450-01-XX-XX Board Retention Feature Pin Quantity Gold Plating Suffix 2 = None (01-36) I = 10 μ” [0.25 μm] all over, PBT insulator R = Kinked Tails (RIA E1 & C1 apply) EU = 10 μ” [0.25 μm] all over, PCT insulator Plating Suffix: (RIA E1 & C1 apply) Board Retention Feature blank = 100 μ” [2.54 μm] tin-lead, PBT insulator 2 = None (RIA E3 & C2 apply) Pin Quantity R = Kinked Tails RK = 200 μ” [5 μm] matte tin, PCT insulator (01-36) TS-0768-B (RIA E1 & C1 apply) Sheet 2 of 3 3 3M is a trademark of 3M Company. Electronic Solutions Division For technical, sales or ordering information call Interconnect Solutions 800-225-5373 http://www.3M.com/interconnects/

3M™ Pin Strip Header .100”, .295” Mating Length, Straight & Right Angle, Solder Tails 929 Series Right Angle A See Note .295 ..096 [2.44] [ 7.49 ] 2X .05 Max(cid:0) .048 [1.22] [1.27] .110 [2.79] .235(cid:0)(cid:112)(cid:0) .015(cid:0) [5.97] .015 [0.38] .100 Typ [2.54] .130(cid:0)(cid:112)(cid:0).015 [ 3.30 ] .025(cid:0)(cid:112)(cid:0).001 Sq Typ(cid:0) [0.64] (cid:133) .040(cid:0)(cid:112)(cid:0).003 After Plating(cid:0) [1.02] C .100(cid:0)(cid:112)(cid:0).003(cid:0) [2.54] Inch [mm] Recommended Hole Pattern Tolerance Unless Noted .0 .00 .000 inch ±.1 ±.01 ±.005 [ ] Dimensions for Reference only Note: A = .10” [2.5] × pin quantity per row. Dimension A is a maximum when the pin strip is cut to length, not when the strip is broken to length. Ordering Information Tin Gold 9X9500-01-XX-XX 9X9550-01-XX-XX Board Retention Feature Pin Quantity Plating Suffix 2 = None (01-36) I = 10 μ” [0.25 μ”] all over, PBT insulator R = Kinked Tails (RIA E1 & C1 apply) Plating Suffix: EU = 10 μ” [0.25 μm] all over, PCT insulator blank = 100 μ” [2.5 μm] tin-lead, PBT insulator (RIA E1 & C1 apply) Board Retention Feature (RIA E3 & C2 apply) 2 = None RK = 200 μ” [5 μm] matte tin, PCT insulator Pin Quantity R = Kinked Tails (RIA E1 & C1 apply) (01-36) TS-0768-B Sheet 3 of 3 3 3M is a trademark of 3M Company. Electronic Solutions Division For technical, sales or ordering information call Interconnect Solutions 800-225-5373 http://www.3M.com/interconnects/

Regulatory Information Appendix 3M Electronic Solutions Division/Interconnect EUROPE Appendix E1: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product is RoHS Compliant 2005/95/EC. “RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. Appendix E2: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/747/EC. “RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. Appendix E3: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as amended by Commission Decision 2005/618/EC. This product contains lead in the solder tail area in excess of the maximum concentration value allowed. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. Appendix E4: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC, as amended by EU Commission Decision 2005/717/EC, as amended by EU Court of Justice Decision 2008/C 116/04 This product contains decaBDE in the insulating material in excess of the maximum concentration allowed for finished products subject to EU RoHS that are placed on the EU market after June 30, 2008. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.product Warranty stated below. RIA-2217A-E

Appendix E5: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under Item 6 of the Annex to the Directive. “RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. CHINA Appendix C1: China RoHS Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers (excluding decaBDE); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. Appendix C2: China RoHS Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers (excluding decaBDE); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the product Warranty stated below. RIA-2217A-E

Appendix C3: China RoHS Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers (excluding decaBDE); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the product Warranty stated below. Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of 90 days from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 3M Electronics Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 U.S.A. Please recycle. Printed in USA. 1-800-225-5373 © 3M 2008. All rights reserved. www.3m.com/interconnects RIA-2217A-E 3M is a trademark of 3M Company.