CATALOG 127:CATALOG 126.qxd 4/15/2011 12:15 PM Page 56 Vectorbord® Plugbordtm ELECTRONICS & TECHNOLOGY, INC. Square Pads-Per-Hole with 0.042” Holes, .100” Grid 3677-6 4.50”Hx8.08”L x.062” TH 8007 4.50”Hx6.50”L x .062” TH 0.100” grid 3-Hole Solder Pad on wiring side only. Single-sided with no etch & 0.100” grid square Pad-Per-Hole Pattern on plating on reverse side component side - overall Ground Plane pattern .042” holes not plated thru on wiring side .042” holes not plated thru with 0.28” x .080” solder pads .085” square isolated solder pads 16-Pin DIP= 21 I/O area w/square solder pads for mounting Material: CEM-1 connector WW Terminals: T44, T46, T49, T68 16-Pin DIP= 60 Solder Terminals: T42-1 Material: CEM-1 WW Socket Pin: R32 WW Terminals: T44, T46, T49, T68 Solder Terminals: T42-1 Vectorbord® Plugbordtm is designed for plug-in WW Socket Pin: R32 applications. Many feature gold-plated con- tacts for edge connectors, mounting for 96 or 160-pin DIN connectors, or 2MM Hard Metric (P1/P2) connector on metric pitch boards. Plugbordtm also offers different basic circuit pat- terns for solder or wire-wrap connections. All bus and circuit patterns are solder coated for user convenience (except P/N 8020). 45P80-1 4.5”Hx8.08”L x .062” TH Selection of mating edge connectors and DIN 0.100” square Pad-Per-Hole Pattern - peripheral Ground Plane pattern on both sides. Top/bottom connectors located on pages 66-69. rows on .200 pitch with no plating. 0.042” holes not plated-thru. 0.085” square iso- 30 CONTACTS lated solder pads on both sides. 16-Pin DIP capacity = 80 3797-2 2.73"H X 4.5"L X .062"TH Material: FR-4 WW Terminals: T44, T46, T49, T68 0.100" grid 3-Hole Solder Pad on one Solder Terminals: T42-1 side only. WW Socket Pin: R32 .042" diameter holes not plated-thru. 30 gold-plated contacts (15 each side) 45P80-2 4.5”Hx8.08”L x .062” TH on .156" centers. Same as above butholes plated-thru 16-pin DIP Capacity = 4 WW Terminals: T44, T46, T49, T68. Three-Hole Solder Pads with 0.042” Holes, .100” Grid Socket pin: R32 Solder Connector: R630. Card Cage: CCK 12 8001 4.50”Hx6.50”L x.062” TH Material: FR-4 0.100” grid 3-Hole Solder Pad on wiring side 3797 2.73”H X 4.5”L X .062”TH only Single-sided with no etch & plating on reverse side .042” holes not plated thru 0.100" grid. Gold-plated edge contacts only 0.28” x .080” solder pads .042" diameter holes not plated-thru. I/O area w/square solder pads for mounting 30 gold-plated contacts (15 each side) on connector .156" centers. 16-Pin DIP= 20 16-pin DIP Capacity = 15 Material: CEM-1 WW Terminals: T44, T46, T49, T68. WW Terminals: T44, T46, T49, T68 Socket pin: R32 Solder Terminals: T42-1, K24C, K31C Solder Connector: R630. WW Socket Pin: R32 Card Cage: CCK 12 Material: FR-4 44 CONTACTS 8023 4.5”Hx6.5”L x .062” TH 0.100” grid, 3-hole Pads Pattern on both sides. 3795-1 2.73"H X 4.5"L X .062"TH 0.042” plated-thru holes. I/O area with square connector mounting. 0.100" grid 3-Hole Solder Pad on one Solder coated pattern. side only. Material: FR-4 .042" diameter holes dd WW Terminals: T44, T46, T49, T68 44 gold-plated contacts (22 each side) borbor SWoWld eSro Tcekremt iPnainls: :R T3422-1 o1n6 -.p1in0 0D" IcPe Cntaeprsa.city = 4 rcug WW Terminals: T44, T46, T49, T68. CiPl Socket pin: R32 Wire-Wrap Connector: R644-2 Card Cage: CCK 12 Specification subject to change without notice Material: FR-4 56 www.vectorelect.com 800-423-5659