Dimensions: [mm] Recommended Land Pattern: [mm] Electrical Properties: Properties Test conditions Value Unit Tol. Impedance @ 100 MHz Z 100 MHz 60 Ω ±25% W Maximum Impedance Z 550 MHz 84 Ω typ. max 0,5 Rated Current 1 I ΔT = 20 K 300 mA max. R 1 Rated Current 2 I ΔT = 40 K 1250 mA max. R 2 0,6 DC Resistance RDC @ 20 °C 0.35 Ω max. 0,25 ±0,1 Type Wide Band Certification: WIDE BAND / HIGH SPEED: W = 1,5 HIGH CURRENT: W = 2,2 RoHS Approval Compliant [2011/65/EU&2015/863] 1,0±0,05 REACh Approval Conform or declared [(EC)1907/2006] Halogen Free Conform [JEDEC JS709B] 5 0 0, Scale - 20:1 Halogen Free Conform [IEC 61249-2-21] ± 5 Component Qualification AEC-Q200 Grade 1 0, Schematic: General Information: Do not use this part beyond the Rated Current as this will create excessive heat and can harm the 5 0 component 0, ± Operating Temperature -55 up to +125 °C 5 0, Storage Conditions (in original < 40 °C ; < 75 % RH packaging) Moisture Sensitivity Level (MSL) 1 Test conditions of Electrical Properties: +20 °C, 33 % RH if not specified differently Scale - 20:1 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD MBH 007.010 2020-09-30 DIN ISO 2768-1m DESCRIPTION WE-CBF SMT EMI Suppression WEMüCrt h& E Ilnedkutrcotnivike eSioSlousti oGnmsbH & Co. KG Ferrite Bead ORDER CODE Max-Eyth-Str. 1 74279276 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 SIZE/TYPE BUSINESS UNIT STATUS PAGE www.we-online.com eiSos@we-online.com 0402 eiSos Valid 1/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.

Typical Impedance Characteristics: Derating Curve: 1000 120% 100% 100 80% ] Ω e [ A]A]A]A] c [[[[ n t t t t a nnnn d eeee 60% pe urrurrurrurr m CCCC I 10 40% 20% 1 1 10 100 1000 0% 0 20 40 60 80 100 120 140 160 Frequency [MHz] TTTTeeeemmmmppppeeeerrrraaaattttuuuurrrreeee[[[[°°°°CCCC]]]] Z XL R Test Equipment: E4991A or equivalent CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD MBH 007.010 2020-09-30 DIN ISO 2768-1m DESCRIPTION WE-CBF SMT EMI Suppression WEMüCrt h& E Ilnedkutrcotnivike eSioSlousti oGnmsbH & Co. KG Ferrite Bead ORDER CODE Max-Eyth-Str. 1 74279276 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 SIZE/TYPE BUSINESS UNIT STATUS PAGE www.we-online.com eiSos@we-online.com 0402 eiSos Valid 2/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.

Packaging Specification - Tape: [mm] Packaging Specification - Reel: [mm] P0 A D0 P2 T (=K0) W3 1 E W1 close to center B D F W 2 A N 0 E B C Top Cover Tape A0 T1 A P1 T1 W2 End Feeding direction Start Carrier Tape Cover Tape detail B B Top Cover Tape Chip Cavity Sprocket Hole No Component Components No Component min. 160mm min.100mm Embossment Bottom Cover Tape Cover Tape min. 400mm Packaging is referred to the international standard IEC 60286-3:2019 Tape Type A (m0m) B (m0m) W (mm) T (mm) T (1mm) P (0mm) P (1mm) P (2mm) D (m0m) E (1mm) E (2mm) F (mm) Material Q (ptyc.s.) A ±(m 2m,0) B m(minm.) C m(minm.) D m(minm.) N m(minm.) W +(m11,m5) W m(ma2xm.) W m(mi3nm.) W m(ma3xm.) Material typ. typ. +0,3/ -0,1 ref. ref. ±0,1 ±0,05 +0,05 +0,1 / -0,0 ±0,1 min. ±0,05 178 1.5 12.8 20.2 50 8.4 14.4 7.9 10.9 Polystyrene 1a 0,69 1,19 8,00 0,66 0,10 4,00 2,00 2,00 1,50 1,75 6,25 3,50 Paper 10000 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD MBH 007.010 2020-09-30 DIN ISO 2768-1m 165° - 180° DESCRIPTION WE-CBF SMT EMI Suppression WEMüCrt h& E Ilnedkutrcotnivike eSioSlousti oGnmsbH & Co. KG Ferrite Bead ORDER CODE Max-Eyth-Str. 1 74279276 Pull-of force 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 SIZE/TYPE BUSINESS UNIT STATUS PAGE Tape width 8 mm 0,1 N - 1,0 N weiSwows.@wew-eo-nolinnlein.ceo.cmom 0402 eiSos Valid 3/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.

Packaging Specification - Inner Carton: [mm] Packaging Specification - Outer Carton: [mm] C I H C H WIC L IC WC L C L (ImCm) W (mICm) H (mICm) N Roe. eol f(pcs.) Q (ptyc.s.) Material L (Cmm) W (mCm) H (mCm) NInon. eorf Carton (pcs.) Q (ptyc.s.) Material Tolerance typ. typ. typ. Tolerance typ. typ. typ. Value 185,00 185,00 80,00 5 50000 Paper Value 445,00 395,00 210,00 10 500000 Paper CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD MBH 007.010 2020-09-30 DIN ISO 2768-1m DESCRIPTION WE-CBF SMT EMI Suppression WEMüCrt h& E Ilnedkutrcotnivike eSioSlousti oGnmsbH & Co. KG Ferrite Bead ORDER CODE Max-Eyth-Str. 1 74279276 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 SIZE/TYPE BUSINESS UNIT STATUS PAGE www.we-online.com eiSos@we-online.com 0402 eiSos Valid 4/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.

Classification Reflow Profile for SMT components: Classification Reflow Soldering Profile: Profile Feature Value Preheat Temperature Min T 150 °C s min Preheat Temperature Max T 200 °C s max T p t TC –5°C Preheat Time ts from Ts min to Ts max ts 60 - 120 seconds Max. Ramp Up Rate p Ramp-up Rate (T to T ) 3 °C/ second max. L P Max. Ramp Down Rate Liquidous Temperature T 217 °C L TL Time tL maintained above TL tL 60 - 150 seconds t Ts max Preheat Area L Peak package body temperature Tp Tp ≤ Tc, see Table below ure Tteimmep ewraitthuirne 5°C of actual peak t p 20 - 30 seconds t a per Ts min Ramp-down Rate (TP to TL) 6 °C/ second max. m Time 25°C to peak temperature 8 minutes max. e T t refer to IPC/ JEDEC J-STD-020E S Package Classification Reflow Temperature (T ): c Volume mm³ Volume mm³ Volume mm³ Properties <350 350-2000 >2000 25 Time 25°C to Peak PB-Free Assembly | Package Thickness 260 °C 260 °C 260 °C < 1.6 mm Time PB-Free Assembly | Package Thickness 260 °C 250 °C 245 °C 1.6 mm - 2.5 mm PB-Free Assembly | Package Thickness 250 °C 245 °C 245 °C ≥ 2.5 mm refer to IPC/ JEDEC J-STD-020E CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD MBH 007.010 2020-09-30 DIN ISO 2768-1m DESCRIPTION WE-CBF SMT EMI Suppression WEMüCrt h& E Ilnedkutrcotnivike eSioSlousti oGnmsbH & Co. KG Ferrite Bead ORDER CODE Max-Eyth-Str. 1 74279276 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 SIZE/TYPE BUSINESS UNIT STATUS PAGE www.we-online.com eiSos@we-online.com 0402 eiSos Valid 5/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.

Cautions and Warnings: Storage Conditions: • A storage of Würth Elektronik products for longer than 12 months is not recommended. Within other effects, the terminals may suffer The following conditions apply to all goods within the product series of WE-CBF ofWürth degradation, resulting in bad solderability. Therefore, all products shall be used within the period of 12 months based on the day of Elektronik eiSos GmbH & Co. KG: shipment. • Do not expose the components to direct sunlight. General: • The storage conditions in the original packaging are defined according to DIN EN 61760-2. • The storage conditions stated in the original packaging apply to the storage time and not to the transportation time of the components. • This electronic component is designed and manufactured for use in general electronic equipment. • Würth Elektronik must be asked for written approval (following the PPAP procedure) before incorporating the components into any Handling: equipment in fields such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network, etc. where higher safety and reliability are • Violation of the technical product specifications such as exceeding the nominal rated current will void the warranty. especially required and/or if there is the possibility of direct damage or human injury. • The temperature rise of the component must be taken into consideration. The operating temperature is comprised of ambient • Electronic components that will be used in safety-critical or high-reliability applications, should be pre-evaluated by the customer. temperature and temperature rise of the component.The operating temperature of the component shall not exceed the maximum • The component is designed and manufactured to be used within the datasheet specified values. If the usage and operation conditions temperature specified. specified in the datasheet are not met, the component may be damaged or dissolved. • Do not drop or impact the components, the component may be damaged. These cautions and warnings comply with the state of the scientific and technical knowledge and are believed to be accurate and reliable. • Würth Elektronik products are qualified according to international standards, which are listed in each product reliability report. Würth However, no responsibility is assumed for inaccuracies or incompleteness. Elektronik does not warrant any customer qualified product characteristics beyond Würth Elektroniks’ specifications, for its validity and sustainability over time. • The responsibility for the applicability of the customer specific products and use in a particular customer design is always within the authority of the customer. All technical specifications for standard products also apply to customer specific products. Product specific: Soldering: • The solder profile must comply with the technical product specifications. All other profiles will void the warranty. Wave soldering is allowed for components bigger than 0805 after evaluation and approval. • All other soldering methods are at the customers’ own risk. Cleaning and Washing: • Washing agents used during the production to clean the customer application might damage or change the characteristics of the wire insulation, marking or plating. Washing agents may have a negative effect on the long-term functionality of the product. Potting: • If the product is potted in the customer application, the potting material might shrink or expand during and after hardening. Shrinking could lead to an incomplete seal, allowing contaminants into the core. Expansion could damage the components. We recommend a manual inspection after potting to avoid these effects. CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD MBH 007.010 2020-09-30 DIN ISO 2768-1m DESCRIPTION WE-CBF SMT EMI Suppression WEMüCrt h& E Ilnedkutrcotnivike eSioSlousti oGnmsbH & Co. KG Ferrite Bead ORDER CODE Max-Eyth-Str. 1 74279276 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 SIZE/TYPE BUSINESS UNIT STATUS PAGE www.we-online.com eiSos@we-online.com 0402 eiSos Valid 6/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.

Important Notes 6. Product Life Cycle Due to technical progress and economical evaluation we also reserve the right to discontinue production and delivery of products. As a The following conditions apply to all goods within the product range of Würth Elektronik standard reporting procedure of the Product Termination Notification (PTN) according to the JEDEC-Standard we will inform at an early stage eiSos GmbH & Co. KG: about inevitable product discontinuance. According to this we cannot guarantee that all products within our product range will always be available. Therefore it needs to be verified with the field sales engineer or the internal sales person in charge about the current product 1. General Customer Responsibility availability expectancy before or when the product for application design-in disposal is considered. The approach named above does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. Some goods within the product range of Würth Elektronik eiSos GmbH & Co. KG contain statements regarding general suitability for certain application areas. These statements about suitability are based on our knowledge and experience of typical requirements concerning the 7. Property Rights areas, serve as general guidance and cannot be estimated as binding statements about the suitability for a customer application. The responsibility for the applicability and use in a particular customer design is always solely within the authority of the customer. Due to this All the rights for contractual products produced by Würth Elektronik eiSos GmbH & Co. KG on the basis of ideas, development contracts as fact it is up to the customer to evaluate, where appropriate to investigate and decide whether the device with the specific product well as models or templates that are subject to copyright, patent or commercial protection supplied to the customer will remain with Würth characteristics described in the product specification is valid and suitable for the respective customer application or not. Elektronik eiSos GmbH & Co. KG. Würth Elektronik eiSos GmbH & Co. KG does not warrant or represent that any license, either expressed or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, 2. Customer Responsibility related to Specific, in particular Safety-Relevant Applications application, or process in which Würth Elektronik eiSos GmbH & Co. KG components or services are used. It has to be clearly pointed out that the possibility of a malfunction of electronic components or failure before the end of the usual lifetime 8. General Terms and Conditions cannot be completely eliminated in the current state of the art, even if the products are operated within the range of the specifications. In certain customer applications requiring a very high level of safety and especially in customer applications in which the malfunction or Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms and Conditions of Würth failure of an electronic component could endanger human life or health it must be ensured by most advanced technological aid of suitable Elektronik eiSos Group”, last version available at www.we-online.com. design of the customer application that no injury or damage is caused to third parties in the event of malfunction or failure of an electronic component. Therefore, customer is cautioned to verify that data sheets are current before placing orders. The current data sheets can be downloaded at www.we-online.com. 3. Best Care and Attention Any product-specific notes, cautions and warnings must be strictly observed. Any disregard will result in the loss of warranty. 4. Customer Support for Product Specifications Some products within the product range may contain substances which are subject to restrictions in certain jurisdictions in order to serve specific technical requirements. Necessary information is available on request. In this case the field sales engineer or the internal sales person in charge should be contacted who will be happy to support in this matter. 5. Product R&D Due to constant product improvement product specifications may change from time to time. As a standard reporting procedure of the Product Change Notification (PCN) according to the JEDEC-Standard inform about minor and major changes. In case of further queries regarding the PCN, the field sales engineer or the internal sales person in charge should be contacted. The basic responsibility of the customer as per Section 1 and 2 remains unaffected. CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD MBH 007.010 2020-09-30 DIN ISO 2768-1m DESCRIPTION WE-CBF SMT EMI Suppression WEMüCrt h& E Ilnedkutrcotnivike eSioSlousti oGnmsbH & Co. KG Ferrite Bead ORDER CODE Max-Eyth-Str. 1 74279276 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 SIZE/TYPE BUSINESS UNIT STATUS PAGE www.we-online.com eiSos@we-online.com 0402 eiSos Valid 7/7 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.