Optical Encoders SERIES 62A,V,D 1/2'' Package FEATURES APPLICATIONS •Low Cost •Global Positioning/Driver •Long Life Information Systems •Available in 3.3 or 5.0 Vdc •Medical Equipment Operating Voltages •High Torque Version to Emphasize Rotational Feel •Economical Size •Optically Coupled for More than a Million Cycles •Optional Integral Pushbutton •Compatible with CMOS, TTL and HCMOS Logic Levels •Available in 12,16, 20, 24 and 32 Detent Positions (Non-detent also available) •Choice of Cable Lengths and O Terminations p tic a Encodl and M DIMENSIONS in inches (and millimeters) ersec h a n ic a l Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com

Optical Encoders TERMINATION OPTIONS C - CONNECTOR , 0.050" CENTERS S - STRIPPED CABLE , 0.050" CENTERS O p tic a Encodl and M ersec h a n ic a l CH - CONNECTOR , 0.100" CENTERS SH - STRIPPED CABLE, 0.100" CENTERS P - PIN, 0.100" CENTERS Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com

Optical Encoders SUPPLY CURRENT & LOGIC OUTPUT CHARACTERISTICS WAVEFORM AND TRUTH TABLE Standard Quadrature 2-Bit Code O p tic a CIRCUITRY: SURFACE MOUNT OPTICS Pushpull Outputs (62A22, 62A15, 62A11) Encodl and M ersec h a n ic a l CIRCUITRY: WIREBOND OPTICS Open Collector Outputs (All Others) Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com

Optical Encoders SPECIFICATIONS Electrical and Mechanical Ratings Environmental Ratings Pushbutton Rating: 5 Vdc, 10 mA, resistive Operating Temperature Range: -40°C to 85°C 0.435 inches across flats. Pushbutton Contact Resistance: less than Storage Temperature Range: Rotor: Thermoplastic 10 ohms (TTL or CMOS compatible) -55°C to 100°C Code Housing: Thermoplastic Pushbutton Life: 3 million actuations min. Relative Humidity: 90–95% at 40°C Pushbutton Dome: Stainless steel Pushbutton Contact Bounce: less than 4 for 96 hours Dome Retaining Disk: Thermoplastic mS at make and less than 10 mS at break Vibration Resistance: Harmonic motion with Pushbutton Housing: Thermoplastic Pushbutton Actuation Force: 1000 ±300 amplitude of 15G, within a varied 10 to 2000 Phototransistor: Planar Silicon NPN grams Hz frequency for 12 hours per MIL-STD-202, Infrared Emitter: Gallium aluminum arsenide Pushbutton Travel: .010/.025 inch Method 204 Pushbutton Contact: Brass, nickel-plated CVooldtaingge: B2r-ebait kqduoawdrna:t u2r5e0 c Voadce db eotuwtpeuetn Mechanical Shock: Test 1: 100G for 6 mS, Flex Cable: 28 AWG, stranded/top coated wire, PVC coated on .050 or .100" centers (cabled mutually insulated parts half sine, 12.3 ft/s; Test 2: 100G for 6 mS, version) Rotational Life: 1,000,000 cycles minimum sawtooth, 9.7 ft/s Header Pins: Phospher bronze, tin-plated (One cycle is a rotation through all positions Spacer: ABS and a full return) Materials and Finishes Optical Rise and Fall Times: less than 30 mS Code Housing: Reinforced thermoplastic Backplate/Strain Relief: Stainless steel maximum Shaft: Zinc or aluminum Operating Torque: Bushing: Zinc casting Style A and V: 2.0 ±1.4 in-oz. initially Shaft Retaining Ring: Stainless steel Style D: 3.5 ±1.4 in-oz initially Detent Spring: Stainless steel Non-detent: less than 1.5 in-oz initially Printed Circuit Boards: NEMA grade FR-4 Shaft Push Out Force: 45 lbs minimum gold over nickel or palladium Mounting Torque: 15 in-lbs maximum Terminals: Brass, tin-plated Terminal Strength: 15 lbs cable pull-out force Mounting Hardware: One brass, nickel-plated minimum nut and zinc-plated spring steel with clear Op Operating Speed: 100 RPM maximum trivalent chromate finish lockwasher supplied tic Axial Shaft Play: .010 maximum with each switch. Nut is 0.094 inches thick by a Encodl and M ersec h a n ic a l ORDERING INFORMATION Series Style: A = 1/2" package, 5.0 Vdc Input, D = high torque w/5.0 Vdc input, V = 3.3 Vdc input Angle of Throw: Detent Non-detent (Styles A&V only) 11 = 11.25° or 32 positions 01 = 11.25° or 32 positions 15 = 15° or 24 positions 05 = 15° or 24 positions 18= 18° or 20 positions 08= 18° or 20 positions 22 = 22.5° or 16 positions 02 = 22.5° or 16 positions 30 = 30° or 12 positions 03 = 30° or 12 positions Pushbutton Option: 01 = w/o pushbutton, 02 = with pushbutton 62A22-01-040S Termination: S = Stripped cable; .050" centers SH = Stripped cable; .100" centers C = Connector; .050" centers CH = Connector; .100" centers P = Pin; .100" centers Cable Length: Cable Terminination: 040 = 4.0in. Cable is terminated with Amp P/N 215083-6. See Amp Mateability Guide for Mating Connector details. *Eliminate cable length if ordering pins. (Ex: 62A22-02-P). These switches have Quadrature 2-bit code output and an optional shaft actuated pushbutton switch. Custom materials, styles, colors, and markings are available. Control knobs available. Available from your local Grayhill Component Distributor. For prices and discounts, contact a local Sales Office, an authorized local Distributor, or Grayhill. Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com