S MOTION CONTROL AND LIGHTING SOLUTIONS Zilog’s ZMOTION™ Detection and Control Family PB022504-0112 Zilog’s ZMOTION™ Detection and Control Family Featuring PIR Technology ZMOTION™ DETECTION & CONTROL FAMILY ADVANTAGES Superior Motion Detection Solutions Enabling Faster Development Cycles Overview  MCU, PIR SENSOR, AND LENS SOLUTION Zilog’s ZMOTION™ Detection and Control Product Family is a series of high-performance microcontrollers with  MOTION DETECTION ALGORITHMS integrated motion detection algorithms combined with a selection of lenses and Passive Infrared (PIR) sensors to BUILT INTO MCU fit a wide range of application requirements. Optimized configuration parameters for the ZMOTION™  4 KB FLASH FOR APPLICATION CODE MCU are provided for each lens/sensor combination ensuring the best possible performance while significantly reducing development risk and minimizing time to market.  OPTIMIZED DETECTION PERFORMANCE AND RELIABILITY Zilog’s ZMOTION™ MCU combines the programmability and rich peripheral set of the Flash-based Z8F042A  BETTER STABILITY AND SENSITIVITY Encore! XP® MCU with built-in software-based motion detection algorithms. These motion detection algorithms THAN TRADITIONAL DESIGNS comprise the PIR engine and run in the background of the MCU while control and status of the engine is accessed  NO TEMPERATURE COMPENSATION through a software API (Application Programming Interface). Create your own application-specific software while REQUIRED taking advantage of Zilog’s Enhanced PIR motion-detection technology.  NO NEED TO DEVELOP COMPLEX Optimize the performance of your product by choosing a lens that closely matches your application. Use your own MOTION DETECTION SOFTWARE or select from our family of lenses spanning 360 degree ceiling, 180 degree wall mount, 25 meter long range, and  LARGE SELECTION OF LENSES 5 meter short range. API settings are provided to match the PIR engine operation to each of the lens and PIR AVAILABLE WITH OPTIMIZED SETTINGS sensor combinations provided. PROVIDED Zilog’s Enhanced PIR motion-detection technology provides a dramatic improvement in both sensitivity and  ZMOTION MCU AVAILABLE SEPARATELY TO USE WITH YOUR OWN stability over traditional designs and is scalable to many market segments including Lighting Control, HVAC, LENS/PYRO Access Control, Vending, Display, Proximity, Power Management, Occupancy Sensing, and many others.  DIRECT SENSOR INTERFACE ELIMINATES EXTERNAL COMPONENTS ZMOTION™ MCU Block Diagram  REDUCED BOM COSTS  COMPLETE YOUR DESIGNS FASTER

ZMOTION™ Detection and Control Family MOTION DETECTION SOLUTIONS 2 ADVANCED MOTION DETECTION SOLUTIONS KEY FEATURES ZMOTION™ Detection and Control Family Feature Set  ADVANCED STATISTICALLY BASED MOTION DETECTION PROCESSING  Optimized assemblage of MCU, Lens, and PIR Sensor  4 KB FLASH FOR APPLICATION CODE  High-performance eZ8® MCU core  SUPPORTS DESIGNS REQUIRING 1 OR  4 KB in-circuit programmable Flash available for application code 2 PIR SENSORS  Single-pin debug with unlimited breakpoints  HYPERSENSE MODE FOR LIGHTING APPLICATIONS  Internal precision oscillator running at 5.53 MHz  HIGH RESOLUTION SIGMA DELTA ADC  External oscillator operating up to 20 MHz  LOW POWER MODES  Sigma Delta ADC with up to 6 channels single ended or 3 channels differential available  API PROVIDES FULL CONTROL AND  On-chip analog comparator with independent programmable reference voltage STATUS OF MOTION DETECTION ENGINE  Full-duplex UART with dedicated BRG  WORLD CLASS ZDS-II DEVELOPMENT  Two 16-bit timers with input capture, output compare, and PWM capability (11 modes total) ENVIRONMENT  Watchdog timer (WDT) with dedicated internal oscillator  6 to 25 I/O pins depending upon package  2.7 V to 3.6 V operating voltage with extended operating temperature range —400 C to +1050 C  Enhanced PIR software engine controlled and monitored through software API registers  Select from an assortment of lenses and pyroelectric sensors to best fit your application  Optimized API settings provided for each lens and pyroelectric sensor combination  Create your own API settings to match your own lens  Directly supports 1 or 2 pyroelectric sensors  Sensitivity control, range control, and directionality detection  Hypersense detection mode for Occupancy sensing  Low power modes With Zilog’s ZMOTION™ Detection and Control Solution, the system bill of materials is significantly reduced. The pyroelectric sensor is directly interfaced to the MCU eliminating external op-amps, electrolytic capacitors, and other components used in traditional designs. The new statistical processing algorithms provided by the Enhanced PIR motion-detection engine also eliminate the need for a discrete temperature compensation circuit. This all leads to a simpler and smaller circuit design, providing better reliability, sensitivity, and stability than traditional designs.

ZMOTION™ Detection and Control Family MOTION DETECTION SOLUTIONS 3 ADVANCED MOTION DETECTION SOLUTIONS APPLICATIONS Ordering Information The ZMOTION™ Detection and Control Family is comprised of the ZMOTION™ MCU, Lens, and Pyroelectric sensor. Construct your part number based on the specific combination of MCU, Lens, and Pyroelectric  LIGHTING CONTROL sensor you wish to order. There are four fields in the part number that determine this combination. The  ACCESS CONTROL ZMOTION™ MCU is also available separately.  CUSTOMER SENSING Order the ZMOTION™ Detection and Control product from Zilog® using the following guide.  HVAC CONTROL  OCCUPANCY SENSING  VENDING APPLICATIONS Position: 1 2 3 4 5 6 7 8 9 10 11 12 13  AUTOMATIC DISPLAYS MCU  PROXIMITY Field Z M O T MCU Lens PIR G Package  POWER MANGEMENT Selected Options For complete ordering information, please refer to the ZMOTION™ Product Specification (PS0285). For more information about Zilog’s motion detection products, ordering or product collateral, please consult your local Zilog distributor or representative. You can find sales office locations and the most current product information on our website; please visit us at www.zilog.com. ZMOTION™ MCU Options Three MCU options provide you with the flexibility needed to optimize for size and functionality. ZMOTION™ MCU Flash GP ADC MCU Detection MCU Package Package Memory I/O Channels Field Part Number Field Z8FS040BSB20EG 4 KB 5 3 8-pin SOIC 0B SB Z8FS040BHH20EG 4 KB 16 4 20-pin SSOP 0B HH Z8FS040BHJ20EG 4 KB 22 6 28-pin SSOP 0B HJ Order the ZMOTION MCU separately using part numbers from the above table. Pyroelectric Sensor Options Choose from the three PIR Sensors available depending on your application requirements. Not all sensors are suitable for all lenses. Part Number Description PIR Field RE200B-P Basic Dual Element 0A SDA02-54-P Premium Dual Element 0B SBDI46-504AA Quad Element 0C

ZMOTION™ Detection and Control Family MOTION DETECTION SOLUTIONS 4 ADVANCED MOTION DETECTION SOLUTIONS Lens Options A selection of matched lenses and pyroelectric sensors are available to meet a variety of applications. The Lens Field and PIR Fields columns in the table below correspond to Zilog part numbers; please see Ordering Information on the previous page. For detailed information about each lens type, refer to the ZMOTION Lens and Pyroelectric Sensor Product Specification (PS0286). Lens PIR Pyro Description & Part Number Typical Applications Fields Fields Sensor Animal Alley Array (88o) Corner wall mount or very high AA 0.9 GI T1 Lens Specification ceiling with rectangular floor 0A RE200B-P  35.6 mm x 49.9 mm flat Fresnel pattern  22.9 mm focal length  Warehouse lighting (bay light) 0A  25 meter range  Large-area lighting control 0B SDA02-54-P  22 equal segments  HVAC Ceiling Mount Array (360o) Ceiling mount for standard CM 0.77 GI V3 Lens commercial heights 0A RE200B-P Specification  Lighting control  37 mm diameter circular lens  HVAC control 0B  19.6 mm focal length  Meeting rooms  3.7 m radius at 2.4 m height 0C SBDI46-504AA  3:1 diameter-to-height floor coverage Ceiling Mount Array (360o) High ceiling mount for commercial CM 0.77 GI V5 Lens and industrial applications 0A RE200B-P Specification  Commercial lighting control  37 mm diameter circular lens  Commercial HVAC control 0C  19.6 mm focal length  Street lighting  12.2 m radius at 12.2 m height 0C SBDI46-504AA  2:1 diameter-to-height floor coverage Ceiling/Wall Mount Array (180o) Wall or ceiling mount for office or CWM 0.5 GI V1 Lens meeting room lighting and HVAC 0A RE200B-P Specification control  Circular lens with 24 mm x 24  Room lighting control 0D mm square base  HVAC control 0C SBDI46-504AA  14.2 mm focal length  Board mount clip-in Clip-on 15 mm Array (360o) Room occupancy and proximity NCL-9(26) Lens Specification sensing 0A RE200B-P  Clips on to pyroelectric sensor  Lighting control  2.25 m radius at 2 m height  HVAC control 1A  2.1:1 diameter-to-height floor  Appliance coverage  Kiosk/display control 0C SBDI46-504AA  Vending power management 10 mm Wall Mount Array (70o) Proximity sensing or entrance NCL-10IL Lens Specification detection  Clips on to pyroelectric sensor  Kiosk 1B 0A RE200B-P  6 beams (X); 2 beams (Y)  Vending  10 meter range  HVAC  Display counters 10 mm Wall Mount Array (40o) Proximity sensing or entrance NCL-3B Lens Specification detection  Clips on to pyroelectric sensor  Kiosk 1C 0A RE200B-P  4 beams (X); 2 beams (Y)  Vending  10 meter range  HVAC  Display counters

ZMOTION™ Detection and Control Family MOTION DETECTION SOLUTIONS 5 ADVANCED MOTION DETECTION SOLUTIONS Lens PIR Pyro Description & Part Number Typical Applications Fields Fields Sensor 10 mm Ceiling/Wall Mount Array Room occupancy and proximity (360°) sensing 0A RE200B-P NCL-3R Lens Specification  Lighting control  Clips on to pyroelectric sensor  HVAC control 1D  2:1 diameter-to-height coverage  Appliances 0C SBDI46-504AA  14 zones  Kiosk/display control  5 meter range  Vending power management 10 mm Wall Mount Array (18o) Entrance detection with directional NCL-10S Lens Specification detection  Clips on to pyroelectric sensor  Kiosk/display counters  2 beams X (27 o)  Vending 1E 0A RE200B-P  1 beam Y (18 o)  HVAC  10 meter range  Entrance/access control Documentation For a complete listing of all available application notes, data sheets, user manuals, and sample libraries, please visit us at www.zilog.com. Document Number Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PS0285 ZMOTION™ Detection and Control Family Product Specification PS0286 ZMOTION™ Lens and Pyroelectric Sensor Product Specification PS0228 Z8 Encore! XP Series Product Specification WP0017 A New PIR Motion Detection Architecture White Paper UM0230 ZMOTION™ Detection & Control Development Kit User Manual QS0076 ZMOTION™ Detection & Control Development Kit Quick Start Guide

ZMOTION™ Detection and Control Family MOTION DETECTION SOLUTIONS 6 ADVANCED MOTION DETECTION SOLUTIONS Related Products Zilog carries a number of motion detection products to suit your application requirements. For more information about the following products, please visit us at www.zilog.com. Product Name Part Number Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ZMOTION Detection & Control ZMOTIONL100ZCOG Development Kit for the ZMOTION Development Kit Detection & Control Family ZMOTION Detection Module ZEPIR0AAS02MODG Low-profile motion detection module ZMOTION Detection Module ZEPIR000102ZCOG Development Kit for the ZMOTION Development Kit Detection Module Z8 Encore! XP F08xA Series Z8F082A Z8 Encore! XP Microcontroller

ZMOTION™ Detection and Control Family MOTION DETECTION SOLUTIONS 7 ADVANCED MOTION DETECTION SOLUTIONS Engineering Notes:

ZMOTION™ Detection and Control Family MOTION DETECTION SOLUTIONS 8 ADVANCED MOTION DETECTION SOLUTIONS Warning: DO NOT USE THIS PRODUCT IN LIFE SUPPORT SYSTEMS. LIFE SUPPORT POLICY ZILOG'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS PRIOR WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF ZILOG CORPORATION. As used herein Life support devices or systems are devices which (a) are intended for surgical implant into the body, or (b) support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in a significant injury to the user. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system or to affect its safety or effectiveness. Document Disclaimer ©2011 Zilog, Inc. All rights reserved. Information in this publication concerning the devices, applications, or technology described is intended to suggest possible uses and may be superseded. ZILOG, INC. DOES NOT ASSUME LIABILITY FOR OR PROVIDE A REPRESENTATION OF ACCURACY OF THE INFORMATION, DEVICES, OR TECHNOLOGY DESCRIBED IN THIS DOCUMENT. ZILOG ALSO DOES NOT ASSUME LIABILITY FOR INTELLECTUAL PROPERTY INFRINGEMENT RELATED IN ANY MANNER TO USE OF INFORMATION, DEVICES, OR TECHNOLOGY DESCRIBED HEREIN OR OTHERWISE. The information contained within this document has been verified according to the general principles of electrical and mechanical engineering. Z8 Encore! XP and ZMOTION are trademarks or registered trademarks of Zilog, Inc. All other product or service names are the property of their respective owners. EMBEDDED IN LIFE WWW.ZILOG.COM | 408-457-9000 Zilog and the Zilog logo are registered trademarks of Zilog, Inc. in the United States and in other countries.