C L D - D PRODUCT FAMILY DATA SHEET S 5 8 R E V 5 G Cree® XLamp® XM-L® Color LEDs PRODUCT DESCRIPTION FEATURES TABLE OF CONTENTS The XLamp® XM-L® Color LED is a multi- • Available in red, green, blue and white Characteristics - Complete Package .....2 color LED that provides high lumen output in a single 5 mm x 5 mm package Characteristics - Per LED Die..................2 in a small package. Compared to discrete • Maximum drive current per LED die: Flux Characteristics ................................3 LEDs, XLamp XM-L Color LEDs reduce 1 A Relative Spectral Power Distribution .....3 the distance between LED die, creating a • Individually addressable LEDs Relative Flux vs Junction Temperature ..4 small optical source for excellent optical • Reflow solderable – JEDEC J-STD-020 Electrical Characteristics ........................4 control and efficient color mixing. XLamp • Electrically neutral thermal path Relative Flux vs. Current .........................5 XM-L Color LEDs can reduce LED system • RoHS and REACh compliant Typical Spatial Distribution .....................5 complexity by reducing the number of • UL® recognized component (E349212) Bin and Order Code Formats ..................6 components required. Performance Groups – Luminous Flux..6 Performance Groups – Chromaticity .....7 Cree XLamp XM-L Color LEDs bring high Performance Groups – Dominant performance and quality of light to a wide Wavelength ..............................................8 range of lighting applications, including Standard Order Codes and Bins .............8 color-changing lighting, stage lighting, Reflow Soldering Characteristics .........10 architectural lighting, indoor directional Notes .....................................................11 lighting, and entertainment lighting. Mechanical Dimensions .......................12 Tape and Reel ........................................13 Packaging ..............................................14 P M A L X / M O C E. E R C W. W W Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, Cree, Inc. XLamp® and XM-L® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300

XLAMP® XM-L® COLOR LED CHARACTERISTICS - COMPLETE PACKAGE The following table lists the product characteristics for the XLamp XM-L Color LED package, measured with all LED dies on simultaneously and each LED die connected to independent drive circuits at 350 mA. Characteristics Unit Minimum Typical Maximum Thermal resistance, junction to solder point °C/W 3.5 Viewing angle (FWHM) degrees (°) 130 ESD withstand voltage (HBM per Mil-Std-883D) V 8000 LED junction temperature °C 150 CHARACTERISTICS - PER LED DIE The following table lists the product characteristics for each LED die within the XLamp XM-L Color LED package. Characteristics Unit Minimum Typical Maximum Temperature coefficient of voltage - red mV/°C -1.8 Temperature coefficient of voltage - green mV/°C -4 Temperature coefficient of voltage - blue, white mV/°C -3 DC forward current - red, green, blue, white mA 1000 Forward voltage (@ 350 mA, 25 °C) - red V 2.25 2.6 Forward voltage (@ 350 mA, 25 °C) - green V 3.3 3.9 Forward voltage (@ 350 mA, 25 °C) - blue, white V 3.1 3.7 Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and XM-L® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 2

XLAMP® XM-L® COLOR LED FLUX CHARACTERISTICS, (T = 25 °C) J The following tables provide several base order codes for XM-L Color LEDs. For a complete description of the order code nomenclature, please refer to the Bin and Order Code Formats section (page 6). Minimum Luminous Flux CCT / Dominant Wavelength Range @ 350 mA Color Order Code Minimum Maximum Group Flux (lm) Red 620 nm 630 nm 45.7 Color + Green 520 nm 535 nm 87.4 C3 XMLCTW-A0-0000-00C3AAAA1 Cool White Blue 450 nm 465 nm 13.9 Cool White 5700 K 8000 K 100 Red 620 nm 630 nm 45.7 Green 520 nm 535 nm 87.4 Color + C2 XMLCTW-A0-0000-00C2AAAB1 Neutral White Blue 450 nm 465 nm 13.9 Neutral White 3700 K 4300 K 80 Red 620 nm 630 nm 45.7 Green 520 nm 535 nm 87.4 Color + C2 XMLCTW-A0-0000-00C2AAAC1 Warm White Blue 450 nm 465 nm 13.9 Warm White 2700 K 3700 K 80 Notes: • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±1 nm on dominant wavelength measurements. See the Measurements section (page 11). • Flux and chromaticity are measured with each LED die connected to independent drive circuits at 350 mA. The flux and chromaticity of each LED die within the XLamp XM-L Color LED package are measured individually. Relative Spectral Power Distribution (If = 350 mA per LED) The following graph represents typical spectral output of the XM-L RGBW Color LED with each LED on independently. RELWAhTitIeV 3E0 S0P0E KC dTaRtAa Lfr PomOW XEPR-G D3 I(SXTPRGIDB_UDTaItOaNsh (eIe t=_ 1365003 m20A.2 PnEdR-r oLbEoDt oD.xIEls, x2)5 °C) F The following graph represents typical spectral output of the XLamp XM-L Color LED with each LED die on independently. 100% r e 80% w o P Red nt 60% Green a di a Blue R e 40% White 3000 K v ti a White 4000 K el 20% R White 6000 K 0% 380 430 480 530 580 630 680 730 780 Wavelength (nm) Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and XM-L® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 3

XLAMP® XM-L® COLOR LED Relative Flux Output vs. Junction Temperature (If = 350 mA) The following graph represents typical performance of each LED die in the XM-L RGBW LED RELATIVE FLUX VS JUNCTION TEMPERATURE (I = 350 mA) F The following graph represents typical performance of each LED die in the XLamp XM-L Color LED. 100% x 80% u Fl s u Red o 60% n mi Green u L Blue e 40% tiv White a el R 20% 0% 25 50 75 100 125 150 Junction Temperature (ºC) Electrical Characteristics (Tj = 25ºC) ELTEheC TfoRllIoCwAinLg C gHraApRh AreCpTreEsReInStsT ItCypSic (aTl p =e r2fo5r m˚Ca)nce of each LED die in the XM-L RGBW LED J The following graph represents typical performance of each LED die in the XLamp XM-L Color LED. 1000 900 800 ) A 700 m ( nt 600 Red e r ur 500 Green C d Blue, White r 400 a w or 300 F 200 100 0 2.0 2.5 3.0 3.5 4.0 Forward Voltage (V) Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and XM-L® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 4

XLAMP® XM-L® COLOR LED Relative Intensity vs. Current (Tj = 25ºC) RELATIVE FLUX VS. CURRENT (T = 25 ˚C) J The following graph represents typical performance of each LED die in the XLamp XM-L Color LED. 300% 250% x u Fl s 200% u Red o n mi Green 150% u Blue L e v White ti 100% a el R 50% 0% 0 100 200 300 400 500 600 700 800 900 1000 Forward Current (mA) TYPICAL SPTAyTIpAiLc DaISl TSRpIBaUTtiIaONl Radiation Pattern The following graph represents typical spectral output of the XLamp MC-E LED with all four LEDs on simultaneously. The following graph represents typical output of the XLamp XM-L Color LED with all four LEDs on simultaneously. 100% 80% y sit n e nt s I 60% u o n mi Lu 40% e v ti a el R 20% 0% -90 -60 -30 0 30 60 90 Angle (º) Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and XM-L® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 5

XLAMP® XM-L® COLOR LED BIN AND ORDER CODE FORMATS Bin codes and order codes are configured in the following manner: Series XML = XML Color CTW = Red, green, blue, white Reel size Internal code Dominant wavelength kit (RGB) Order Code SSSCCC-BD-HHHH-NNNNNNNNN Chromaticity kit for white Flux kit Internal code Package configuration A = Individually addressable Series XML = XML Color CTW = Red, green, blue, white Dominant wavelength bin for each die (RGB) Bin Code Internal code SSSCCC-B-HHHH-NNNMMKKKK Chromaticity bin for white die Flux bin for each die (RGBW) Package configuration A = Individually addressable PERFORMANCE GROUPS – LUMINOUS FLUX Each LED die in the XLamp XM-L Color LED is tested individually for luminous flux and placed into one of the following luminous-flux groups. Minimum Luminous Flux Maximum Luminous Flux Color Group Code (lm) @ 350 mA (lm) @ 350 mA) M 45.7 87.4 Red N 87.4 114 N 87.4 114 Green P 114 148 Blue F 13.9 39.8 2 80 100 White 3 100 120 4 120 140 • Flux and chromaticity are measured with each LED die connected to independent drive circuits at 350 mA. Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and XM-L® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 6

XLAMP® XM-L® COLOR LED PERFORMANCE GROUPS – CHROMATICITY (I = 350 mA PER LED DIE) F  The white LED die in the XLamp XM-L Color LED is individually tested for chromaticity at 350 mA and placed into one of the regions defined by the bounding coordinates shown below. Region x y Region x y .295 .297 .316 .332 .308 .311 .317 .319 WM WC .310 .300 .308 .311 .298 .288 .306 .322 .306 .322 .314 .355 .308 .311 .316 .332 WB WF .295 .297 .306 .322 .292 .306 .301 .342 .301 .342 .329 .345 .306 .322 .329 .330 WE WD .292 .306 .317 .319 .287 .321 .316 .332 .308 .311 .329 .369 .317 .319 .329 .345 WN WG .318 .308 .316 .332 .310 .300 .314 .355 Region x y Region x y Region x y Region x y .3670 .3578 .3702 .3722 .3825 .3798 .3783 .3646 .3702 .3722 .3736 .3874 .3869 .3958 .3825 .3798 5A 5B 5C 5D .3825 .3798 .3869 .3958 .4006 .4044 .3950 .3875 .3783 .3646 .3825 .3798 .3950 .3875 .3898 .3716 .4147 .3814 .4221 .3984 .4342 .4028 .4259 .3853 .4221 .3984 .4299 .4165 .4430 .4212 .4342 .4028 7A 7B 7C 7D .4342 .4028 .4430 .4212 .4562 .4260 .4465 .4071 .4259 .3853 .4342 .4028 .4465 .4071 .4373 .3893 Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and XM-L® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 7

XLAMP® XM-L® COLOR LED PERFORMANCE GROUPS – DOMINANT WAVELENGTH The red, green and blue LED dies in the XLamp XM-L Color LED are tested individually for dominant wavelength (DWL) and sorted into one of the DWL bins defined below. Minimum DWL Maximum DWL Color DWL Group @ 350 mA @ 350 mA K 450 455 Blue L 455 460 M 460 465 2 520 525 Green 3 525 530 4 530 535 Red A 620 630 STANDARD ORDER CODES AND BINS The following table list sstandard kit numbers and performance bins. Kit numbers completely describe an order code’s color or chromaticity bins and luminous flux range. Minimum Luminous Flux (lm) Color @ 350 mA* DWL / Chromaticity Bins Kit Number Group Flux (lm) Red M 45.7 A Green N 87.4 2, 3, 4 00C3AAAA1 Blue F 13.9 K, L, M White 3 100 WC, WD, WF, WG, WB, WE, WM, WN Red M 45.7 A Green N 87.4 2, 3, 4 00C2AAAB1 Blue F 13.9 K, L, M White 2 80 5A, 5B, 5C, 5D Red M 45.7 A Green N 87.4 2, 3, 4 00C2AAAC1 Blue F 13.9 K, L, M White 2 80 7A, 7B, 7C, 7D For other flux and chromaticity combinations, contact Cree or an authorized distributor. * Cree XLamp XM-L Color LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and XM-L® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 8

XLAMP® XM-L® COLOR LED STANDARD ORDER CODES AND BINS - CONTNUED 0.45 0.44 2700 K 0.43 3000 K 0.42 8C 3500 K 8B 7C 0.41 7B 0.40 4000 K 6C C1 8A 8D 4500 K 6B 7D 0.39 5C 7A 6D 5B 0.38 5000 K B1 6A 4C 5D 0.37 5700 KWH 3C 4B 5A 0.36 3B 4D 4A y 0.35 6500 KWG 3D CC W3JA 0.34 WF 0.33 8000 K A1 WD 0.32 WE WC WP 0.31 10000 K WB WN 0.30 WM WA 0.29 WK 0.28 0.27 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 2 2 2 2 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 5 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. CCx Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and XM-L® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 9

XLAMP® XM-L® COLOR LED REFLOW SOLDERING CHARACTERISTICS In testing, Cree has found XLamp XM-L Color LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of the solder paste used, and therefore it is the lamp or luminaire manufacturer’s responsibility to determine applicable soldering requirements. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment. t T P Critical Zone P T to T L P Ramp-up T ure L Tsmax tS t a r e p Ts m min e T ts Ramp-down Preheat 25 t 25˚C to Peak Time Profile Feature Lead-Free Solder Average Ramp-Up Rate (Ts to T) 1.2 °C/second max p Preheat: Temperature Min (Ts ) 120 °C min Preheat: Temperature Max (Ts ) 170 °C max Preheat: Time (ts to ts ) 65-150 seconds min max Time Maintained Above: Temperature (T) 217 °C L Time Maintained Above: Time (t) 45-90 seconds L Peak/Classification Temperature (Tp) 235 - 245 °C Time Within 5 °C of Actual Peak Temperature (tp) 20-40 seconds Ramp-Down Rate 1 - 6 °C/second Time 25 °C to Peak Temperature 4 minutes max. Note: All temperatures refer to the topside of the package, measured on the package body surface. Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and XM-L® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 10

XLAMP® XM-L® COLOR LED NOTES Measurements The luminous flux, radiant power, chromaticity, forward voltage and CRI measurements in this document are binning specifications only and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors that are not within Cree’s control and are not intended or provided as operational specifications for the products. Calculated values are provided for informational purposes only and are not intended or provided as specifications. Pre‑Release Qualification Testing Please read the LED Reliability Overview for details of the qualification process Cree applies to ensure long-term reliability for XLamp LEDs and details of Cree’s pre-release qualification testing for XLamp LEDs. RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product Ecology section of the Cree website. REACh Compliance REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available upon request. UL® Recognized Component This product meets the requirements to be considered a UL Recognized Component with Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/UL 8750. Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and XM-L® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 11

6 5 4 3 2 1 NOTICE REVISONS CCORENET ACIONNEFDI DWEINTTHIIANL A. TRHE ITSH PEL OPRT OAPNRDIE TTHAER YIN AFNODRMATION REV DESCRIPTION BY DATE APP'D 6 CONFIDENTIAL INFORMATION5 OF CREE, INC. THIS PLOT 4 3 2 A INITIAL REL1EASE DC 08/29/1C2K NOTICUMENAAYU NTOHTO BREIZ CEOD PPIEERDS, ROENP TR WHOIETD HUWCOREUIDTTT OERN D CISOCNLSOESNETD TO ANY B REVISOANDSDED ANODE SIGN TO ISO METRIC DC 10/4/12C K CCORENET ACIONNEFDI DWEINTTHIIANL A.O TRFHE C ITSRH EPEEL OPINRTC OA.PNRDIE TTHAER YIN AFNODRMATION XLAMP® XM-LRE®V COLOR LEDDESCCRIPTION CORRECTEDB DYOMDEA RTAEDIAUPSP'D DC 11/15/12 CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT A INITIAL RELEASE DC 08/29/1C2K MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON T WHIET HWORUITTTEN CONSENT B ADDED ANODE SIGN TO ISO METRIC DC 10/4/12C K OF CREE INC. C CORRECTED DOME RADIUS DC 11/15/12 D D MECHANICAL DIMENSIONS D D Thermal vias, if present, are not shown on these drawings. 5.000 4.78 All measurements are ±.13 mm unless other.w50i0se indicated. 5.000 4.78 8 1 .500 1 8 1.01 8 7 1 D1 D2 2 1 1.01 2 8 1.01 7 5.000 4.78 C 7 C D1 D2 6 2 D4 D3 3 1.01 2 3 7 6 1.01 5.000 4.78 C D4 D3 4 C 6 5 3 3 1.01 4 6 1.01 5 .250 4 5 1.01 4 5 .250 .500 TOP VIEW TOP VIEW R2.26 3.02 .500 .500 2.5.70802 TOP VIEW TOP VIEW R2.26 3.02 SIDE VIEW .500 BO.5T0T0OM VIEW Anode 2.782 SIDE VIEW BOTTOM VIEW 8 D1 1 B NEGATIVE (-) 1 POSITIVE (+) 1 B 8 D1 1 D5 B NEGATIVE (-) 1 POSITIVE (+) 1 B 7 D2 2 NEGATDIV5E (-) 2 POSITIVE (+) 2 COLOR D1: RED 7 D2 2 D6 NEGADT2IV: EG R(-E) E2N POSITIVE (+) 2 COLOR D3: BLUE 6 D3 3 D1: RED D4: WHITE NEGATDIV6E (-) 3 POSITIVE (+) 3 D2: GREEN D3: BLUE 6 D3 3 D7 D4: WHITE NEGATIVE (-) 3 POSITIVE (+) 3 A NEGATDIV7E (-) 4 5 D4 4 POSITIVE (+) 4 UDNIMLAEENNSDSS IAOOFTNTHSEE ARRR WFEINI SINIES IHSN.PCDCEHDCHRE.I FSCAEIREWCODKNNI NB DDY8AA/2TT9/EE12 4PD6hu0orh0na eSm i(l9,i cN1o9.nC) D321r7i3v7-e053300 A NEGATIVE (-.)5 4062.758 .502.D788 D4 45 DP8OSITIVE (+) 4.80 .80 T4HIRD ANG.L2E5 PROJECTTUDFTIOONIOM.HL2RLNAEIE E5RSNRNS.HD5ADSSX....XXXXE °0N I AAOO XXX E C FNTT X N ± ± E ±± T H± GS M EU E LARENR E.....R T50000LWF °EA01E36PI3NI L5SSIRNI SEPSO .IHASS5NJRP.PE0CTEMADCECHDCSCPHRTET.A FII OFFSSCAIPOEOTOIINURELERWCRENRLOEDD OKSYRFR:NNHAAVIIX....X. ANXXXXXCE°N°BE XX X XE EL C DDDYD 8T X X ± ± ±EF ± ± AAA / ±± M I 2 U N TTT 9ENI 6/EEES.......T55000001L3H°°A01E1362:SL5S0 T SIPIZT ASXELRPMEFTEMAICSLNPA ITOAFPTWILNEDR EL DPMROYRR:2AAVOIARWTEKLEDDIECNATTITGINVE GEN FSOSSTIPNC4PD.IFIEZTI6ahuCSAC1XE0xLorHLh6M 0nE(.aE9 e0LSm1 0 i(Tl909,i Wc)N1D o39R .M2RnC1)E5 A3AD320V-R1rW705i.A3Kv7-50-IeE055N0T3831IGN08 M05 GNA SORPSK.FE1EHaCTxE I(NE9GT1O9F) 3RB11E3/1V-5.A558 1.01 1.01 SURFAX.XC°. X8E X 0±F ± I N I 6S..503H°1:0 .F8IN0AL PROTECTIVE FSINCISAC1HL6.E000 2500-0018 M5ARSKEHTEINEGTOF B1/1 6 5 4.78 4 4.78 3 2 1 .25 .25 4.78 4.78 .25 .25 .25 .25 1.01 1.01 .97 .97 4.78 4.78 4.78 4.78 Recommended PCB Solder Pad Recommended Stencil Pattern (Shaded Area Is Open) Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and XM-L® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 12

6 5 4 3 2 1 NOTICE REVISIONS CCORENET ACINOENDF IWDEITNHTIINA LA.R TEH ITSH PEL PORTO APNRDIE TTHAER IYN AFONDRMATION REV DESCRIPTION BY DATE APP'D CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT UMONFA AYCU RNTEOHETO IBRNEICZ .CEOD PPIEERDS, ROENP RWOITDHUOCUETD T OHRE DWISRCITLTOESNE CDO TNOS AENNYT POCKET SIZE XLAMP® XM-L® COLOR LED Ao - 5.40mm [.213"] D D 2.00[.079]P2 Do1.50+-..0100.0591+-..00000309 [] Bo - 5.40mm [.213"] Ko - 3.35mm [.132"] 4.00[.157] 1.75[.069] Po E1 TAPE AND REEL 3.0° 5.40[.213] Bo C All Cree carrier tapes conform to E5UMCCCOI.NOORFAA5 AEYNNC0UE FTRN[ -TIAUMCCCOCDEO.HI42NOORFNOEAETO AE YNNNE1 NCIBRNUE D8FTTFR7NEIC TIAI IZCDEAOWD ]H.CIEFNOEL1EETIOOD T NE NNIIBNR PNHDTPFTDEFIICII IEIEZNAWD AO6.CERD LLEARIO,DS, T.N IR M RN POTHP[TNEAAHEFI.IN1EIEN O4AOTPIT6 RDS0 LITRHARW0O ES,u.IP. OR EMCRN4OTI2LT2 NEDEAHE PNO]H5Ot OUTPIRT TSOF oICTRHWOO UAIPCEOECPNITNLTDR DRmE P OD1HOT EUIOR1ET OHFE2TCOR T2 EU,AHCE. A PI aD3TN.ENDWNRRR0 ID C0T ESIYIRON0OE Ht.ECT I RAFTTTM[E[,HLe MO.A N.THI ODE4N4W WREDRIAIS SCIS8dIN7YRMNEN .XCP I 42AAFCDTTLLA OTNTHO ]]OOTICEDRINOLOSTSNMS NE PA EACDoLNNTO OTYITNOOT mS N5 AENNYTp 5onent Handling4 S4ystems StandaCrd3.3REV REV D2EPSCAORD2IPEPClTSRIlCOEO RKNVdIIPSCTEIROIiOENmKTNVSIS EIOSeNTSInZ SsEIiZoEnBYs Bi1YnDA Tm1EDAmTAEPP.'DAPP'D Ao - 5.40mm [.213"] D Ao - 5.40mm [.213"] D D 2.002[..00709[.]0P792]P2 Do1.D5o01+-.5..00100+-...0100059.105+-9..010000+-3.0.090000[30]9 [] BoB - o - 5.450.m40mm [m.2 1[.32"1]3"] D 8.00[.3P15] 1D.150[.059]4.004[..10507[.]1P57o]Po .T36[.014] 1E.1751E[..017659[.]069] KoK -o -3.335.m35mm [m.1 3[.21"3]2"] 3.0° 5.40[.213] B B 3.0° 5.B4o0[.213] Bo 7.0° 12.00[.472] NO6TICE 5 C C 4 3 5.505[..25107[.]2F17]F 2 N1O2M. N0I0ON[AM.4LI7N2RAE]VLISONS 1 C C UMCCCONOORFA AEYNNCUE FTRN TIACDEOHINOEETO NE NIBRNDTFEICI IZAWD .CELEIOD TNIN PHPTFIIEIENAORD LARS,. R MROTEAHEN TPIT S IRHWO POENILT D POHOURTOFCO UACEPTNDRRT D EIHOE ETERT,H A WIDENRI RCSIYNI.C T AFTLTONHOEDRINSSME CPADLOT OTNIOOTS N EANNTY 3.35[.K13o2] CREE REFERENCE DRAWING FOR TEK-PAK DRAWINRABGE V 0182M7[A.145D00EE.42[ 2C.1]54A0L0ET.o42H2a1]5dO2eDd.3E p10 oDA2 cEM[N..kS34WDeCA08tR AX cI4PM[No.T]4W uIOAOn8NDXt4 Ew] aNsO 7T5E0 LARGER DDBDYCS 121/D2/A86T//1E102 BAPSP 'D 5.40[.213] D A Ao THIRD ANGLE PRBOJECBTION TUFODNOSILLMREUEAER RSSNNAFSHDSNA E OIACCO...XE..XXXXTXXFEEN°T°HXX XX T SUF M X E E X I N RAR NE ± ± ± LR±W ±IT FS±±EAEIIHSNSL I:SE NI PS ..S.....SAHI5500000NP6PR136.10C°3°E0UE5THCCSsEI IFOFSeIINEErDLD Y:FeFCMADIePNHRAPADEATdRLCEW. OR KCPNDIVRR ABE OLOYiDTrNEeICNTc IVt Eio FInN8DDDISAAA.4HTTT0/2EEE03D /8[1.R0.3 0PA105W[.S]TS3IIIPCZTN1ELAEL5GXEA] MSC A5L0EDR5AW0ING 2NCO4.A0R2 7R -. 00 1DI°.0E15 7 400. SR0 61DFPH[D01°.haEu.00ox Er15n h1T(S5Tea90 i1(m9l9i[9Ac1,.]) o90 N3)n P.15O3 CD31F9 3-2r5E-i57]v5375e0081 03RAE/V1 . A .T36[..T03164[.]0D14] B B 6 5 4 3 2 1 4 END 6 85 CATHODE SID4E START 3.353[..K13313o5.2[7.]1532] 3.35 2 1 NOTICE Ko 2400-00009 C D UMCCCONOORFA AEYNNCUE FTRN TIACDEOHNOEETOE N NIBDRNTFE ICIWIZAD .CELIETOD NIHN PPTIFI(NEIEs1AO 1RDe 5LAR6eS,.a R MRp0OTmlEeAHEomNp dTPIcT STmWtI RHkyOw rPeOIE aNT(piLt DtmiH sOholOPUeO TcRimFrCtnU ka OACE)iTepn PNDRo teTR.Ds E)fOHI EETER,TH IWADENRI RCSINYI.CT FTALTOHONERIDSNSME P ACDLTO OTINOOTSN AENNYT A ALo(1a0d0eA0d NLPaoOmc6kDpesEt)s SIDE 5.4(045[0.5.2e4 1em043m[p.0]as2pt0etA1y tmaly3 oepl ]emapodAsLoc t (eock bm1kaey0edti nst0teas .mw)rp TmoiemHtfhi InR .TD)H AIRNDG ALEN 4GPLREO PJERCOTJIEOCNT1IO2TUNFODNOSILLMREUEAER RSTSNUNAFFODSHDNSONA SILE OLMIACCROEU...XE..XEAXXXTXXEFEER NR°T°SSNHXX XX TN C A SFSUFH M DX E E XS N A I NE RAR NOE I R A ±CCO ± ...XE± ..XLR±W ±IT XXXT XXFFSEE±±EN°T°AEHXX EXX T IIHC S NSSUFL M X E E X I : S E INI NE RAR P NSE R ± ±. ±. SL.....RSA±WH ±IIT5 5 00000FSN± ±EP6PRAE136.10ERIIHC°3S°NES0E5L3 TI:HSCE NICS EPSE E I .I.S.....SAHFIO5F500000SN PF6IPR136.I10NREEC°3°E0E5TDLDEHCCSYE:EI1I2 INFROFSDFIIFNECMADEEIEXPNHRDLADEPADEAYT:RNLCEW.R ORKCPNFQ12IVCMADRRC AITBEEPNHR OALOYYDPADEATTENRNLCEWE. IORCKCPNN IVTRRC A DBIE OVLO I22YDTETENERE 44FMICNI0 0NTDDDA DIISVAAA00 4HETTTW/--R2EEE F003D IN/DDDA100IIRS0AAAN400 HTTTW/A2EEE00G3D W/991IRS 0TNS--FII ICRCZTAN2ELAGOELOEWGXEAS TERSR FIIICZTMSNLELAE OELCTGXEA ARE 5MSLK 0CETDR- A5EAP5WL0KIAN0EDG R-K 52ANCPCWO O04.IADNMAGM 0K ER2NCRN2OT 4A.SDAR-C0W0RRI20EAIR-N40WSR06DFPHGI01haEu00oEx ErIn h11 TN(STe4a900 SiR1(m6lD9FPiH9GAc1011,haEu) o90o Nx Er38)nn h1 TP.(1STO3e Ca90D31 2Fi1(ml 3-9i2r95Ac1E-1i7,57v)5 o9 N375e38)n05 081P.1 O3 0C3D31R2FA 3-E2r5/E-i7V57v51 3.75e05081 03RAAE/V1D . A 6 5 4 3 2 1 B B 12.4 +.2 C .0 C MEASURED AT HUB 330 +.25 16.4 -.75 +0.2 .0 1.9±.4 MEASURED AT HUB A THIRD ANGLE PROJECTION MTUFILOONLLLRIEME DRSESIHAMTSNEE EOECRN..XTTXXESS°H XX MIUA EO X NENR N TDL ±W S± AE± AILSASF SREPT E A SES...5 21RPRIPN52TE° E5F SCCI NIOIFFISNIIEEHLDDY.: MCADPHRADPEAT.RECW CORKNIVRA --BEL--OYDNIN DDD0AAA6TTT/EEE0----8/1013.T1ITLE±.2 XM LOADING S4PDFP6hau0oxrh0 nE(a e9Sm 1iC(l99,ic )1No 93.nC)1 D33 2-1r57i3v57-e50583300 A 21±.4 ...XXXX°XX X ± ± ± ± ...1527.555° FINAL PROTECTIVE F-IN-ISH SIZEC DRAWING N2O.402-00012 REBV. B SURFACE FINISH: 1.6 -- SCALE3.000 SHEET OF 1/1 6 B 5 4 3 2 1 12.4 +1.0 -.5 MEASURED AT EDGE 60° 60° REVISONS REV DESCRIPTION BY DATE APP'D Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, X Lamp® and XM-L® are registered trademarks of Cre e, In c. A UL® and the UR logo are registered trademarks of UL LLC. THIRD ANGLE PROJECTION TUDFOONIMLLREEE RSNASHASNSNEID OOEC ..XNATTXXE°FSH XX MUT E XA EENR R RTL ±W ±E AE ±F ILSISINN SEP I I A S SNS...500RHPCP10T.E°HE5SCCE IOSIFFNIIEELDDY: MCADPHRADPEAT.RECW CORKNIVRA --BEL--OYDNIN DDD0AAA9TTT/EEE2----9/09 TRITLEEEL, 13" X 12MM, 3 P4PDFI6hau0Eoxrh0 n(a e9SCm 1i(l99,ic )1ENo 93.nC)1 D33 S2-1r157i3v5N7-e50583330A0P A ...XXXX°XX X ± ± ± ± ....5000136°0 FINAAL PNROTTEIC-TSIVTE FAINTISHIC HIPS SIZEC DRAWING N2O.400-00009 REAV. SURFACE FINISH: 63 - SCALE0.500 SHEET OF 1/1 6 5 4 3 2 1

XLAMP® XM-L® COLOR LED PACKAGING Humidity Indicator Dessicant Card (inside bag) (inside bag) Unpackaged Reel Label with Cree Bin Code, Quantity, Reel ID Label with Cree Bin Vacuum-Sealed Label with Cree Bin Packaged Reel Code, Qty, Lot # Moisture Barrier Bag Code, Qty, Lot # Label with Cree Order Code, Quantity, Reel ID, PO # Label with Cree Bin Code, Quantity, Reel ID Label with Customer Order Code, Qty, Reel ID, PO # Boxed Reel Label with Cree Order Code, Patent Label Quantity, Reel ID, PO # Label with Cree Bin Code, Quantity, Reel ID Patent Label Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and XM-L® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 14