4.7mm HOUSING FOR LED LAMP WITH WIRE ATTENTION Part Number: WP1533AA/SRD14V-W152 OBSERVE PRECAUTIONS FOR HANDLING Super Bright Red ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description (cid:122) Outstanding material efficiency. The Super Bright Red source color devices are made with (cid:122) Reliable and rugged. Gallium Aluminum Arsenide Red Light Emitting Diode. (cid:122) Low current capability. Static electricity and surge damage the LEDS. (cid:122) Housing UL rating:94V-0. It is recommended to use a wrist band or anti-electrostatic (cid:122) Housing material: type 66 nylon. glove when handling the LEDs. (cid:122) 14V internal resistor. All devices, equipment and machinery must be electrically (cid:122) RoHS compliant. grounded. Package Dimensions Remark: Recommended panel mount hole diameterφ=6.30-6.35mm; panel thickness 1.0mm. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAH3806 REV NO: V.4A DATE: AUG/30/2013 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1102009881

Selection Guide Iv (mcd) [2] Viewing V= 14V Angle [1] Part No. Dice Lens Type Min. Typ. 2θ1/2 150 300 WP1533AA/SRD14V-W152 Super Bright Red (GaAlAs) Red Diffused 60° *50 *100 Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. * Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. Max. Units Test Conditions λpeak Peak Wavelength Super Bright Red 655 nm VF=14V λD [1] Dominant Wavelength Super Bright Red 640 nm VF=14V Δλ1/2 Spectral Line Half-width Super Bright Red 20 nm VF=14V IF Forward Current Super Bright Red 10.5 13.5 mA VF=14V IR Reverse Current Super Bright Red 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2.Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25°C Parameter Super Bright Red Units Power dissipation 160 mW Forward Voltage 16 V Reverse Voltage 5 V Operating Temperature -40°C To +70°C Storage Temperature -40°C To +85°C Lead Solder Temperature [1] 260°C For 3 Seconds Lead Solder Temperature [2] 260°C For 5 Seconds Notes: 1. 2mm below package base. 2. 5mm below package base. SPEC NO: DSAH3806 REV NO: V.4A DATE: AUG/30/2013 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1102009881

Super Bright Red WP1533AA/SRD14V-W152 SPEC NO: DSAH3806 REV NO: V.4A DATE: AUG/30/2013 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1102009881

PACKING & LABEL SPECIFICATIONS WP1533AA/SRD14V-W152 Terms and conditions for the usage of this document 1.The information included in this document reflects representative usage scenarios and is intended for technical reference only. 2.The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3.When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues. 4.The information in this document applies to typical usage in consumer electronics applications. If customer's application has special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with Kingbright representative for further assistance. 5.The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6.All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes SPEC NO: DSAH3806 REV NO: V.4A DATE: AUG/30/2013 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1102009881

SPEC NO: DSAH3806 REV NO: V.4A DATE: AUG/30/2013 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1102009881