图片仅供参考

详细数据请看参考数据手册

Datasheet下载
  • 型号: UC3524AN
  • 制造商: Texas Instruments
  • 库位|库存: xxxx|xxxx
  • 要求:
数量阶梯 香港交货 国内含税
+xxxx $xxxx ¥xxxx

查看当月历史价格

查看今年历史价格

UC3524AN产品简介:

ICGOO电子元器件商城为您提供UC3524AN由Texas Instruments设计生产,在icgoo商城现货销售,并且可以通过原厂、代理商等渠道进行代购。 UC3524AN价格参考¥6.55-¥14.82。Texas InstrumentsUC3524AN封装/规格:PMIC - 稳压器 - DC DC 切换控制器, 降压,升压,反激,正激转换器,全桥,半桥,推挽 稳压器 正 输出 升压,降压,升压/降压 DC-DC 控制器 IC 16-PDIP。您可以下载UC3524AN参考资料、Datasheet数据手册功能说明书,资料中有UC3524AN 详细功能的应用电路图电压和使用方法及教程。

产品参数 图文手册 常见问题
参数 数值
产品目录

集成电路 (IC)半导体

Cuk

描述

IC REG CTRLR PWM VM 16DIP开关控制器 Advanced Regulating

产品分类

PMIC - 稳压器 - DC DC 切换控制器

品牌

Texas Instruments

产品手册

点击此处下载产品Datasheet

产品图片

rohs

符合RoHS无铅 / 符合限制有害物质指令(RoHS)规范要求

产品系列

电源管理 IC,开关控制器 ,Texas Instruments UC3524AN-

数据手册

点击此处下载产品Datasheet

产品型号

UC3524AN

PWM类型

电压模式

上升时间

120 ns

下降时间

25 ns

产品目录页面

点击此处下载产品Datasheet

产品种类

开关控制器

倍增器

其它名称

296-11212-5

分频器

包装

管件

升压

单位重量

1.054 g

占空比

45%

占空比-最大

50 %

反向

反激式

同步管脚

Yes

商标

Texas Instruments

安装风格

Through Hole

封装

Tube

封装/外壳

16-DIP(0.300",7.62mm)

封装/箱体

PDIP-16

工作温度

0°C ~ 70°C

工厂包装数量

25

开关频率

450 kHz

拓扑结构

Buck, Boost, Flyback, Forward, Full-Bridge, Half-Bridge, Push-Pull

最大工作温度

+ 70 C

最小工作温度

0 C

标准包装

25

电压-电源

8 V ~ 40 V

类型

Voltage Mode PWM Controllers

系列

UC3524A

输出数

2

输出电压

60 V

输出电流

200 mA

输出端数量

2 Output

降压

隔离式

频率-最大值

500kHz

推荐商品

型号:LT3791HFE-1#PBF

品牌:Linear Technology/Analog Devices

产品名称:集成电路(IC)

获取报价

型号:MAX8529EEG+T

品牌:Maxim Integrated

产品名称:集成电路(IC)

获取报价

型号:TL5001AIDR

品牌:Texas Instruments

产品名称:集成电路(IC)

获取报价

型号:LM3485MM/NOPB

品牌:Texas Instruments

产品名称:集成电路(IC)

获取报价

型号:LM5020SDX-1/NOPB

品牌:Texas Instruments

产品名称:集成电路(IC)

获取报价

型号:UC2844AD8TR

品牌:Texas Instruments

产品名称:集成电路(IC)

获取报价

型号:LTC1629CG#PBF

品牌:Linear Technology/Analog Devices

产品名称:集成电路(IC)

获取报价

型号:LTC3805IDD-5#PBF

品牌:Linear Technology/Analog Devices

产品名称:集成电路(IC)

获取报价

样品试用

万种样品免费试用

去申请
UC3524AN 相关产品

UC2525BDWG4

品牌:Texas Instruments

价格:

LTC3862EUH-2#TRPBF

品牌:Linear Technology/Analog Devices

价格:

LT3781IG#PBF

品牌:Linear Technology/Analog Devices

价格:

LT3752IFE#PBF

品牌:Linear Technology/Analog Devices

价格:

AN8018SA-E1V

品牌:Panasonic Electronic Components

价格:

LTC3787IUFD#PBF

品牌:Linear Technology/Analog Devices

价格:

LTC3813IG#PBF

品牌:Linear Technology/Analog Devices

价格:

MAX5019ESA

品牌:Maxim Integrated

价格:

PDF Datasheet 数据手册内容提取

None

None

None

None

None

None

PACKAGE OPTION ADDENDUM www.ti.com 6-Feb-2020 PACKAGING INFORMATION Orderable Device Status Package Type Package Pins Package Eco Plan Lead/Ball Finish MSL Peak Temp Op Temp (°C) Device Marking Samples (1) Drawing Qty (2) (6) (3) (4/5) 5962-8764502EA ACTIVE CDIP J 16 1 TBD Call TI N / A for Pkg Type -55 to 125 5962-8764502EA UC1524AJ ACTIVE CDIP J 16 1 TBD Call TI N / A for Pkg Type -55 to 125 UC1524AJ UC1524AJ883B ACTIVE CDIP J 16 1 TBD Call TI N / A for Pkg Type -55 to 125 UC1524AJ/883B UC1524AL ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 UC1524AL UC1524AL883B ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 UC1524AL/ 883B UC2524ADW ACTIVE SOIC DW 16 40 Green (RoHS NIPDAU Level-2-260C-1 YEAR -40 to 85 UC2524ADW & no Sb/Br) UC2524ADWG4 ACTIVE SOIC DW 16 40 Green (RoHS NIPDAU Level-2-260C-1 YEAR -40 to 85 UC2524ADW & no Sb/Br) UC2524ADWTR ACTIVE SOIC DW 16 2000 Green (RoHS NIPDAU Level-2-260C-1 YEAR -40 to 85 UC2524ADW & no Sb/Br) UC2524AJ ACTIVE CDIP J 16 1 TBD Call TI N / A for Pkg Type -40 to 85 UC2524AJ UC2524AN ACTIVE PDIP N 16 25 Green (RoHS NIPDAU N / A for Pkg Type -40 to 85 UC2524AN & no Sb/Br) UC3524ADW ACTIVE SOIC DW 16 40 Green (RoHS NIPDAU Level-2-260C-1 YEAR 0 to 70 UC3524ADW & no Sb/Br) UC3524ADWTR ACTIVE SOIC DW 16 2000 Green (RoHS NIPDAU Level-2-260C-1 YEAR 0 to 70 UC3524ADW & no Sb/Br) UC3524AJ ACTIVE CDIP J 16 1 TBD Call TI N / A for Pkg Type 0 to 70 UC3524AJ UC3524AN ACTIVE PDIP N 16 25 Green (RoHS NIPDAU N / A for Pkg Type 0 to 70 UC3524AN & no Sb/Br) UC3524ANG4 ACTIVE PDIP N 16 25 Green (RoHS NIPDAU N / A for Pkg Type 0 to 70 UC3524AN & no Sb/Br) (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. Addendum-Page 1

PACKAGE OPTION ADDENDUM www.ti.com 6-Feb-2020 (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of <=1000ppm threshold. Antimony trioxide based flame retardants must also meet the <=1000ppm threshold requirement. (3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Device Marking for that device. (6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish value exceeds the maximum column width. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. OTHER QUALIFIED VERSIONS OF UC1524A, UC2524A, UC2524AM, UC3524A, UC3524AM : •Catalog: UC3524A, UC2524A, UC3524AM, UC3524A •Military: UC2524AM, UC1524A, UC1524A NOTE: Qualified Version Definitions: •Catalog - TI's standard catalog product •Military - QML certified for Military and Defense Applications Addendum-Page 2

PACKAGE MATERIALS INFORMATION www.ti.com 24-Jun-2016 TAPE AND REEL INFORMATION *Alldimensionsarenominal Device Package Package Pins SPQ Reel Reel A0 B0 K0 P1 W Pin1 Type Drawing Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant (mm) W1(mm) UC2524ADWTR SOIC DW 16 2000 330.0 16.4 10.75 10.7 2.7 12.0 16.0 Q1 UC3524ADWTR SOIC DW 16 2000 330.0 16.4 10.75 10.7 2.7 12.0 16.0 Q1 PackMaterials-Page1

PACKAGE MATERIALS INFORMATION www.ti.com 24-Jun-2016 *Alldimensionsarenominal Device PackageType PackageDrawing Pins SPQ Length(mm) Width(mm) Height(mm) UC2524ADWTR SOIC DW 16 2000 367.0 367.0 38.0 UC3524ADWTR SOIC DW 16 2000 367.0 367.0 38.0 PackMaterials-Page2

None

GENERIC PACKAGE VIEW DW 16 SOIC - 2.65 mm max height 7.5 x 10.3, 1.27 mm pitch SMALL OUTLINE INTEGRATED CIRCUIT This image is a representation of the package family, actual package may vary. Refer to the product data sheet for package details. 4224780/A www.ti.com

PACKAGE OUTLINE DW0016A SOIC - 2.65 mm max height SCALE 1.500 SOIC C 10.63 SEATING PLANE TYP 9.97 A PIN 1 ID 0.1 C AREA 14X 1.27 16 1 10.5 2X 10.1 8.89 NOTE 3 8 9 0.51 16X 0.31 7.6 B 7.4 0.25 C A B 2.65 MAX NOTE 4 0.33 TYP 0.10 SEE DETAIL A 0.25 GAGE PLANE 0.3 0 - 8 0.1 1.27 0.40 DETAIL A (1.4) TYPICAL 4220721/A 07/2016 NOTES: 1. All linear dimensions are in millimeters. Dimensions in parenthesis are for reference only. Dimensioning and tolerancing per ASME Y14.5M. 2. This drawing is subject to change without notice. 3. This dimension does not include mold flash, protrusions, or gate burrs. Mold flash, protrusions, or gate burrs shall not exceed 0.15 mm, per side. 4. This dimension does not include interlead flash. Interlead flash shall not exceed 0.25 mm, per side. 5. Reference JEDEC registration MS-013. www.ti.com

EXAMPLE BOARD LAYOUT DW0016A SOIC - 2.65 mm max height SOIC 16X (2) SEE SYMM DETAILS 1 16 16X (0.6) SYMM 14X (1.27) 8 9 R0.05 TYP (9.3) LAND PATTERN EXAMPLE SCALE:7X METAL SOLDER MASK SOLDER MASK METAL OPENING OPENING 0.07 MAX 0.07 MIN ALL AROUND ALL AROUND NON SOLDER MASK SOLDER MASK DEFINED DEFINED SOLDER MASK DETAILS 4220721/A 07/2016 NOTES: (continued) 6. Publication IPC-7351 may have alternate designs. 7. Solder mask tolerances between and around signal pads can vary based on board fabrication site. www.ti.com

EXAMPLE STENCIL DESIGN DW0016A SOIC - 2.65 mm max height SOIC 16X (2) SYMM 1 16 16X (0.6) SYMM 14X (1.27) 8 9 R0.05 TYP (9.3) SOLDER PASTE EXAMPLE BASED ON 0.125 mm THICK STENCIL SCALE:7X 4220721/A 07/2016 NOTES: (continued) 8. Laser cutting apertures with trapezoidal walls and rounded corners may offer better paste release. IPC-7525 may have alternate design recommendations. 9. Board assembly site may have different recommendations for stencil design. www.ti.com

None

None

IMPORTANTNOTICEANDDISCLAIMER TI PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING REFERENCE DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS” AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS. These resources are intended for skilled developers designing with TI products. You are solely responsible for (1) selecting the appropriate TI products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable standards, and any other safety, security, or other requirements. These resources are subject to change without notice. TI grants you permission to use these resources only for development of an application that uses the TI products described in the resource. Other reproduction and display of these resources is prohibited. No license is granted to any other TI intellectual property right or to any third party intellectual property right. TI disclaims responsibility for, and you will fully indemnify TI and its representatives against, any claims, damages, costs, losses, and liabilities arising out of your use of these resources. TI’s products are provided subject to TI’s Terms of Sale (www.ti.com/legal/termsofsale.html) or other applicable terms available either on ti.com or provided in conjunction with such TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicable warranties or warranty disclaimers for TI products. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2020, Texas Instruments Incorporated