REVISION DP TSW-XXX-XX-XXX-X-XX-XXX OPTION #2 TERMINAL SPACE SPEC. -POLARIZING SPECIFICATION DO NOT (SEE ASSEMBLY INSTRUCTIONS) XXX INDICATES POS. TO BE OMITTED (SEE FIG 3) SCALE FROM -1=.100[2.54] FILL EVERY POSITION OPTION #1 THIS PRINT -2= .200[5.08] FILL EVERY OTHER POS. -BLANK= STRAIGHT STARTING W/ 1ST & ENDING -RA= RIGHT ANGLE (SEE TABLE 3 & 5, FIG 5) W/ LAST POS. IN BODY) -RE= EXTENDED RIGHT ANGLE (SEE TABLE 3 & 5, FIG 5)(SINGLE ROW ONLY) -NA= RA OPTION WITH STRAIGHT OPTION BODY BODY LENGTH SPEC. -NE= RE OPTION WITH STRAIGHT OPTION BODY EXPRESSED IN # OF POS -LC= LOCKING CLIP (USE LTC-01 FOR -S ROW AND -1: -01 THRU -50 (-S, -D, -T) LTC-02 FOR -D ROW)(STYLES 08 THRU 13 & 22 ONLY) (SEE FIG 2) "A" = NO. OF POS. x .100[2.54] (N/A IN -RA OR -RE OPTION AND/OR LESS THAN 4 POSITIONS) -2: -02 THRU -25 (-S, -D, -T) (N/A IN -T OR -Q) "A" = NO OF POS. x .200[5.08] - .100[2.54] -LA= -RA OPTION WITH -LL OPTION (SEE FIG 5) -LL= LOCKING LEAD (SEE FIG 4) TERMINAL SPECIFICATION (N/A WITH -RE OR -NE OPTION) SEE TABLE 1 (N/A IN SINGLE ROW, 1 OR 2 POSITIONS) ROW SPECIFICATION (SEE TABLE 2) PLATING SPECIFICATION -S: SINGLE -G: 10µ" GOLD IN CONTACT AREA, 3µ" GOLD ON TAIL -D: DOUBLE -T: MATTE TIN CONTACT AND TAIL -T: TRIPLE -S: 30µ" SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL -Q: TRIPLE ROW, FILL OUTER ROWS ONLY -H: 30µ" HEAVY GOLD IN CONTACT AREA, 3µ" GOLD ON TAIL -L: 10µ" LIGHT SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL -F: 3µ" FLASH SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL -E: 50µ" EXTRA HEAVY GOLD IN CONTACT AREA, 3µ" GOLD ON TAIL (-07, -08, -09, -13, -14, -15, -16, -20, -21 ONLY) -TL: TIN/LEAD (90/10 +/-5%) CONTACT AND TAIL (AVAILABLE ONLY ON LEAD STYLES -07, -08 & -09) -STL: 30µ" SELECTIVE GOLD IN CONTACT AREA, TIN/LEAD (90/10 +/-5%) TAIL (AVAILABLE ONLY ON LEAD STYLES -07, -08, -10, -15, -16, -17, -21, -23 & -24 THROUGH HOLE ONLY) -TM: MATTE TIN CONTACT AND TAIL -SM: 30µ" SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL -LM: 10µ" LIGHT SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL -FM: 3µ" FLASH SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL -SS: 30µ" STRIPE SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL (SEE NOTE 13) NOTES: 1. C REPRESENTS CRITICAL DIMENSION. 2. MINIMUM TERMINAL PUSHOUT: 3 LBS. 3. MAXIMUM HEIGHT VARIATION: .005[0.13](-RA TAIL N/A). 4. ASSEMBLE GOLD PLATE END AS SHOWN. 5. STYLE -26: ROUND END TO APPEAR ON BOTTOM. UNLESS OTHERWISE SPECIFIED, * PROPRIETARY NOTE * 67.. 'TCO'±W .. 00 00& 58 [[00 ..S12 30 W]] FOAYR SSPTYECLE. -O08F ,2 O° PATPIOPLNIE -SL ATO & A -LRLA ONLY. DIMENSIONS ARE IN INCHES. TPHROISP DROIECTUAMRYE INNTF OCORNMTAATIINOSN C AONNDF IADLELN DTEIASLIG ANN, D TOLERANCES ARE: MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS POSITIONS, POST & TAIL, IN ALL DIRECTIONS. AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, 1890.. .AM TSLEWLA D-S5IUM0R-EDEN F SBRIOOODNMYS T TCHOEA BNBEE B NAEDB U ORSAUEDTD CIIUFL SR WOTSIFTW HT-HI5NE0 ±-TD.E0 R0ISM5 U[I0NN.A1A3LV]S.A .ILABLE D...XXXECXXX:XXIM :X A:. 0L.S10 .[ 00 0 50 . [ 32 0 ]0 . 1[ 0 3 . ]0 5 1 A ] N G2 LES IOROWNETRRCPH .PIR TETAOTRHRED IPTNSUR, DCCTOOEOOJDE NCAC,US NTTEM RYINN AEUT NNA NOSTNAFF SYUE SH RTMAARHMALEOLNDT RNEN OICZOERE,RT IDI NBWN PCECIE. TODRHRISSOPOCOUNLOTR O ASTRETHD EEED,N EI NITXNIP TW ARYEN HNSOYOS L RE 5Pe2H-M0O aPNAilE R: iK8n 1fEo2A@-9SST4 A4B-ML6V7TDE3C3, N. c E oW mF AA X L :B 8A 1cN2oY-d9, 4eIN8 -54557031425720 C 11. ORIENTATE PINS TO PREVENT BANDOLIER MARKS FROM SHOWING MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: 3:1 DESCRIPTION: IN THE POST AREA. (SEE TABLE 7) BODIES: DUPONT PBT, UL 94 VO, COLOR: BLACK .025[0.64] SQ. POST TERMINAL STRIP ASSEMBLY 12. MAXIMUM CUT FLASH: .020[0.50] TERMINALS: PHOS BRONZE 13. -SS OPTION ONLY AVAILABLE IN STRAIGHT LEAD STYLES -07, -08 & DWG. NO. TSW-XXX-XX-XXX-X-XX-XXX -09, -RA STYLE -08 ONLY. CAN ONLY MATE WITH SSW, SSQ, SSM, ESW, ESQ AND BCS. BY: KOLB 08/24/1988 SHEET 1 OF 6 F:\DWG\MISC\MKTG\TSW-XXX-XX-XXX-X-XX-XXX-MKT.SLDDRW

REVISION DP C SEE TABLE 8 (SEE CALLOUT) -1XX=.100[2.54] -2XX=.200[5.08] C "C"±.008[0.20] .100 2.54 .200 5.08 .200 5.08 (SEE TABLE 1, SHT 6) 2 MAX SWAY (EITHER DIRECTION) (SEE NOTE 3 AND 6) 2 MAX SWAY .100 2.54 (EITHER DIRECTION) "L" .100 2.54 (SEE TABLE 4, SHT 5) REF .100 2.54 REF .200 5.08 .300 7.62 .300 7.62 SEE NOTE 5 2 MAX SWAY 2 MAX SWAY REF REF REF (EITHER DIRECTION) (EITHER DIRECTION) FIG 1 -S -D -T -Q (TSW-1XX-XX-XX-S SHOWN) "G" REF .596 15.15 REF * PROPRIETARY NOTE * THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY PHONE: 812-944-6733 FAX: 812-948-5047 OWTRHITETRE PNR COOJENCSTE INNT A ONFY S MAMANTENCE,R I NWCI.THOUT THE EXPRESS e-Mail info@SAMTEC.com code 55322 DESCRIPTION: "F" DO NOT SCALE DRAWING .025[0.64] SQ. POST TERMINAL STRIP ASSEMBLY FIG 2 SHEET SCALE: 3:1 DWTGS. NWO. -XXX-XX-XXX-X-XX-XXX (TSW-1XX-XX-XX-S-LC SHOWN) (SAME AS FIG 1, DIFFERENT AS SHOWN) F:\DWG\MISC\MKTG\TSW-XXX-XX-XXX-X-XX-XXX-MKT.SLDDRW BY: KOLB 08/24/1988 SHEET 2 OF 6

REVISION DP FIG 3 -1: .100[2.54] TERMINAL SPACING 01 01 (SAME AS FIG 1, DIFFERENT AS SHOWN) 01 01 50 01 02 01 03 01 03 CL CL 01 01 02 SINGLES DOUBLES TRIPLES SINGLES DOUBLES TRIPLES 01 99 100 148 150 148 150 SINGLES DOUBLES TRIPLES -Q: STRAIGHT VERSION STRAIGHT VERSION (FILL OUTER ROWS ONLY) ODD POSITIONS EVEN POSITIONS 01 01 25 01 02 01 03 01 03 01 01 03 04 04 CL CL 02 01 49 50 73 75 73 75 01 SINGLES DOUBLES TRIPLES -Q: 01 (FILL OUTER ROWS ONLY) SINGLES DOUBLES TRIPLES SINGLES DOUBLES TRIPLES -2: .200[5.08] TERMINAL SPACING RIGHT ANGLE VERSION RIGHT ANGLE VERSION ODD POSITIONS EVEN POSITIONS LOCKING LEAD = CRIMP LOCATION FIG 4 TWO CENTER MOST PINS TO BE CRIMPED. LOCKING LEAD ODD POSITIONS, CRIMP CENTER POSITION AND POSITION CLOSEST TO PIN ONE. (NOTE: END VIEWS SHOWN) IF CRIMP POSITION IS POLARIZED, MOVE ONE POSITION TOWARDS PIN ONE. (SAME AS FIG 1, DIFFERENT AS SHOWN) LTC-01 LTC-02 SEE CRIMP DETAIL .017 0.43 C MIN * PROPRIETARY NOTE * THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE .04 1.0 OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY .0080 0.203 C OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS PHONE: 812-944-6733 FAX: 812-948-5047 WRITTEN CONSENT OF SAMTEC, INC. e-Mail info@SAMTEC.com code 55322 SINGLE DOUBLE SINGLE STRAIGHT DOUBLE STRAIGHT TRIPLE STRAIGHT (TYP) DESCRIPTION: -LC-LL -LC-LL -LL -LL -LL DO NOT SCALE DRAWING .025[0.64] SQ. POST TERMINAL STRIP ASSEMBLY CRIMP DETAIL DWG. NO. SCALE: 4:1 SHEET SCALE: 2:1 TSW-XXX-XX-XXX-X-XX-XXX (TYP ALL CRIMPS) F:\DWG\MISC\MKTG\TSW-XXX-XX-XXX-X-XX-XXX-MKT.SLDDRW BY: KOLB 08/24/1988 SHEET 3 OF 6

REVISION DP FIG 5 (RIGHT ANGLE) PIN #3 (-LA OPTION IS SHOWN ON ALL RIGHT ANGLES FOR DIMENSIONAL AND LOCATION PURPOSES.) PIN #2 (SEE CRIMP DETAIL VIEW, SHT 3) (SAME AS FIG 1, DIFFERENT AS SHOWN) PIN #2 PIN #1 PIN #1 PIN #1 .320 8.13 .219 5.56 REF .119 3.02 REF .04 1.0 REF .04 1.0 .04 1.0 C 90° C 90° C 90° .06 1.5 .06 1.5 C.100 2.54 C .100 2.54 C .200 5.08 "E" REF (SEE NOTE 9) (SEE NOTE 9) (SEE TABLE 5) "D" (SEE TABLE 3) "E" REF (SEE TABLE 5) "E" REF (SEE TABLE 5) -S -D -T * PROPRIETARY NOTE * THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY PHONE: 812-944-6733 FAX: 812-948-5047 OWTRHITETRE PNR COOJENCSTE INNT A ONFY S MAMANTENCE,R I NWCI.THOUT THE EXPRESS e-Mail info@SAMTEC.com code 55322 DESCRIPTION: DO NOT SCALE DRAWING .025[0.64] SQ. POST TERMINAL STRIP ASSEMBLY DWG. NO. SHEET SCALE: 3:1 TSW-XXX-XX-XXX-X-XX-XXX F:\DWG\MISC\MKTG\TSW-XXX-XX-XXX-X-XX-XXX-MKT.SLDDRW BY: KOLB 08/24/1988 SHEET 4 OF 6

REVISION DP POST AREA BANDOLIER (REF) TAIL AREA IN PROCESS 1 (SAME AS FIG 1, DIFFERENT AS SHOWN) -T PLATING ONLY C (SEE NOTE 11) (SEE TABLE 7) * PROPRIETARY NOTE * THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY PHONE: 812-944-6733 FAX: 812-948-5047 OWTRHITETRE PNR COOJENCSTE INNT A ONFY S MAMANTENCE,R I NWCI.THOUT THE EXPRESS e-Mail info@SAMTEC.com code 55322 DESCRIPTION: DO NOT SCALE DRAWING .025[0.64] SQ. POST TERMINAL STRIP ASSEMBLY DWG. NO. SHEET SCALE: 3:1 TSW-XXX-XX-XXX-X-XX-XXX F:\DWG\MISC\MKTG\TSW-XXX-XX-XXX-X-XX-XXX-MKT.SLDDRW BY: KOLB 08/24/1988 SHEET 5 OF 6

REVISION DP .025 0.64 SQ REF (TYP) .018 0.46 REF (TYP) FIG 6 (-26 LEAD STYLE) (SAME AS FIG. 1, DIFFERENT AS SHOWN) (1) .230[5.84] POST FOR -RA OR -RE OPTION (5) AVAILABLE IN -LL OPTION (2) OMIT WITH -Q ROW SPECIFICATION (6) AVAILABLE IN -LA OPTION .005[0.13] (3) NOT AVAILABLE IN -RA OR -RE OPTION (7) ON STYLE -08 -LA, RA: "C" = .230[5.84]± . 0 08[0.20] (4) NOT AVAILABLE IN -RE OPTION (8) 1.220[30.99] POST FOR STRAIGHT PIN VERSION * PROPRIETARY NOTE * THIS DOCUMENT CONTAINS CONFIDENTIAL AND * SQUARE END OF PIN (T-1RS7-01-XXX-2 SHOULD BE LOCATED AT "C" DIMENSION DURING FILL PROCESS. PMRAONPURFIEATCATRUYR IINNFGO, RRMEPARTOIODNU CATNIODN A,L UL SDEE, SPIAGTNE, NT RIGHTS (SEE FIG. 6) AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY PHONE: 812-944-6733 FAX: 812-948-5047 OWTRHITETRE PNR COOJENCSTE INNT A ONFY S MAMANTENCE,R I NWCI.THOUT THE EXPRESS e-Mail info@SAMTEC.com code 55322 DESCRIPTION: DO NOT SCALE DRAWING .025[0.64] SQ. POST TERMINAL STRIP ASSEMBLY DWG. NO. SHEET SCALE: 3:1 TSW-XXX-XX-XXX-X-XX-XXX F:\DWG\MISC\MKTG\TSW-XXX-XX-XXX-X-XX-XXX-MKT.SLDDRW BY: KOLB 08/24/1988 SHEET 6 OF 6