TS63 www.vishay.com Vishay Sfernice Multi-Turn Surface Mount 1/4" Square Cermet Trimmers, Fully Sealed FEATURES • 0.25 W at 70 °C • Industrial grade • Multi-turn operation • A low contact resistance variation (down to 2 % Rn) • Low end contact resistance (1  typical) DESIGN SUPPORT TOOLS click logo to get started • Full sealing • Tests according to CECC 41000 or IEC 60393-1 Models Available • Material categorization: for definitions of compliance The TS63 multiturn trimmer has been designed for use in please see www.vishay.com/doc?99912 PCB surface mounting applications. Three variations are available according to the positioning of the control screw and contact positions. The cermet track gives a high stability performance with an extended ohmic capacity of 10  to 2 M. DIMENSIONS in millimeters (± 0.5 mm) RECOMMENDED TS63X SOLDERING AREAS Slot 0.5 x 0.5 5.8 ± 0.10 1 0.25 5 max. c Ø 1.8 1 ± 0.10 2.54 0.7 c b b 2.54 Ø 0.45 2.54 6.85 max. a 0.20 6.7 max. 2.54 6.85 max. 7.5 TS63Z Ø 1.8 6.85 max. 3 1.3 ± 0.1 Slot 0.5 x 0.5 5 max. b 1 ± 0.1 9.3 0.25 7.6 max. 6.85 max. 8.85 max. c a Ø 0.45 5.3 max. 1 2.54 2.54 2.54 2.54 TS63Y max. 5 max. 2.54 c 6.85 6.850 .m3ax. Slot 0.5 x 0.5 c b b 1.3 ± 0.1 a Ø 0.45 22..5544 Ø 1.8 6m.a8x5. 2.54 1 a 3 1 ± 0.10 6.7 max. 7.5 8 max. Revision: 17-Oct-2018 1 Document Number: 51011 For technical questions, contact: sferpottrimmers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

TS63 www.vishay.com Vishay Sfernice ELECTRICAL SPECIFICATIONS Resistive element Cermet Electrical travel 14 turns ± 2 Resistance range 10  to 2 M Standard series 1 - 2 - 5 Standard ± 10 % Tolerance On request ± 5 % a c Circuit diagram (1) (3) b cw (2) Linear 0.25 W at 70 °C 0.25 W N R I E W Power rating O P 0.125 D E T A R 0 0 50 70 100 155 AMBIENT TEMPERATURE IN °C Temperature coefficient See Standard Resistance Element Data table Limiting element voltage 250 V Contact resistance variation (typical) 2 % Rn or 2  End resistance (typical) 1  Dielectric strength (RMS) 1000 V Insulation resistance 106 M MECHANICAL SPECIFICATIONS Mechanical travel 15 turns ± 5 Operating torque (max. Ncm) 1.5 End stop torque Clutch action Unit weight (max. g) 0.5 Wiper (actual travel) Positioned at approx. 50 % ENVIRONMENTAL SPECIFICATIONS Temperature range -55 °C to +155 °C Climatic category 55/125/56 Sealed container Sealing IP67 MSL level 1 SOLDERING RECOMMENDATIONS Recommended reflow profile 2, see Application Note www.vishay.com/doc?52029 Revision: 17-Oct-2018 2 Document Number: 51011 For technical questions, contact: sferpottrimmers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

TS63 www.vishay.com Vishay Sfernice PERFORMANCES TYPICAL VALUES AND DRIFTS TESTS CONDITIONS RT/RT (%) R1-2/R1-2 (%) OTHER 1000 h at rated power Electrical endurance ± 1 % ± 2 % Contact res. variation: < 1 % Rn 90'/30' - ambient temp. 70 °C Phase A dry heat 125 °C Phase B damp heat Climatic sequence ± 2 % ± 3 % Phase C cold -55 °C Phase D damp heat 5 cycles 40 °C 93 % RH Dielectric strength: 1000 V Damp heat steady state ± 2 % ± 3 % RMS 56 days Insulation resistance: > 104 M -55 °C to +125 °C Charge of temperature 5 cycles ± 1 % V1-2/V1-3  ± 2 % Mechanical endurance 200 cycles at rated power ± (2 % + 3 ) Contact res. variation: < 3 % Rn 50 g’s at 11 ms Shock 3 successive shocks in 3 directions ± 1 % V1-2/V1-3  1 % 10 Hz to 55 Hz Vibration 0.75 mm or 10 g’s ± 1 % V1-2/V1-3  ± 2 % for 6 h Note • Nothing stated herein shall be construed as a guarantee of quality or durability STANDARD RESISTANCE ELEMENT DATA LINEAR LAW TYPICAL STANDARD TCR RESISTANCE MAX. POWER MAX. WORKING MAX. CURRENT -55 °C VALUES AT 70 °C VOLTAGE THROUGH WIPER +125 °C  W V mA ppm/°C 10 0.25 1.58 158 20 0.25 2.23 112 50 0.25 3.53 77 100 0.25 5.00 50 200 0.25 7.07 35 500 0.25 11.2 22 1K 0.25 15.8 15.8 2K 0.25 22.3 11.2 5K 0.25 35.3 7.1 10K 0.25 50.0 5.0 ± 100 20K 0.25 70.7 3.5 25K 0.25 79.0 3.2 50K 0.25 112 2.2 100K 0.25 158 1.6 200K 0.25 224 1.1 250K 0.25 250 1.1 500K 0.13 250 0.50 1M 0.06 250 0.25 2M 0.03 200 0.125 MARKING Printed: VISHAY trademark, model, style, ohmic value (in , k, M), tolerance (in %) only if non standard, manufacturing date, marking of terminal 3 Revision: 17-Oct-2018 3 Document Number: 51011 For technical questions, contact: sferpottrimmers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

TS63 www.vishay.com Vishay Sfernice PACKAGING in millimeters - X, Y and Z types: on tape and reel (dia. 330 mm) of 500 pieces, code TR500 - On request in magazine pack by 50 pieces (Tube) code TU Version Z Ø 13 22.4 Ø 330 16 3 Ø 1.5 Ø 1.5 12 Version X.Y 4 6 Ø 1.5+ 0.1 - 0 4 2 2 12 0.3 2 1.8 16 0.3 12° max. 6.05 Ø 1.5 7.06 ORDERING INFORMATION (part number) T S 6 3 Y 5 0 4 K R 1 0 SPECIAL MODEL STYLE OHMIC VALUE TOLERANCE PACKAGING NUMBER TS63 X From K = ± 10 % R10 = (If applicable) Y 10  to 2 M On request reel 500 pieces Given by Z 504 = 500 k J = ± 5 % On request Vishay T20 = for custom tube 50 pieces design DESCRIPTION (for information only) TS63 Y 500K 10 % TR e3 MODEL STYLE VALUE TOLERANCE SPECIAL PACKAGING LEAD FINISH RELATED DOCUMENTS APPLICATION NOTES Potentiometers and Trimmers www.vishay.com/doc?51001 Guidelines for Vishay Sfernice Resistive and Inductive Components www.vishay.com/doc?52029 Revision: 17-Oct-2018 4 Document Number: 51011 For technical questions, contact: sferpottrimmers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice www.vishay.com Vishay Disclaimer  ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000