NOT RECOMMENDED FOR NEW DESIGNS SY10E164 Micrel, Inc. 16:1 SY1S0YE10106E4164 MULTIPLEXER SY100E164 FEATURES DESCRIPTION (cid:1) 850ps Data Input to Output The SY10/100E164 are 16:1 multiplexers with a (cid:1) Extended 100E VEE range of –4.2V to –5.5V differential output. The select inputs (SEL0,1,2,3) control (cid:1) Differential output which one of the sixteen data inputs (A0–A15) is propagated to the output. (cid:1) Fully compatible with industry standard 10KH, Special attention to the design layout results in a typical 100K ECL levels skew between the 16 inputs of only 50ps. (cid:1) Internal 75KΩ input pull-down resistors (cid:1) Fully compatible with Motorola MC10E/100E164 (cid:1) Available in 28-pin PLCC package BLOCK DIAGRAM PIN NAMES Pin Function A0 A0 – A15 Data Inputs A1 Q SEL[0:3] Select Inputs 16:1 Q, Q Outputs A14 Q A15 VCCO VCC to Output SEL0 SEL1 SEL2 SEL3 M9999-032006 Rev.: G Amendment: /0 1 hbwhelp@micrel.com or (408) 955-1690 Issue Date: March 2006

SY10E164 Micrel, Inc. SY100E164 PACKAGE/ORDERING INFORMATION Ordering Information(1) O A10 A11 A12 A13 A14 A15 VCC Package Operating Package Lead Part Number Type Range Marking Finish 25 24 23 22 21 20 19 SY10E164JC J28-1 Commercial SY10E164JC Sn-Pb A9 26 18 NC A8 27 17 NC SY10E164JCTR(2) J28-1 Commercial SY10E164JC Sn-Pb SEL3 28 PLCC 16 VCC SY100E164JC J28-1 Commercial SY100E164JC Sn-Pb VEE 1 TOP VIEW 15 Q SEL2 2 J28-1 14 Q SY100E164JCTR(2) J28-1 Commercial SY100E164JC Sn-Pb SEL0 3 13 VCCO SY10E164JZ(3) J28-1 Commercial SY10E164JZ with Matte-Sn SEL1 4 12 A0 Pb-Free bar-line indicator 5 6 7 8 9 10 11 SY10E164JZTR(2, 3) J28-1 Commercial SY10E164JZ with Matte-Sn Pb-Free bar-line indicator A7 A6 A5 A4 A3 A2 A1 SY100E164JZ(3) J28-1 Commercial SY100E164JZ with Matte-Sn Pb-Free bar-line indicator 28-Pin PLCC (J28-1) SY100E164JZTR(2, 3) J28-1 Commercial SY100E164JZ with Matte-Sn Pb-Free bar-line indicator Notes: 1. Contact factory for die availability. Dice are guaranteed at T = 25°C, DC Electricals only. A 2. Tape and Reel. 3. Pb-Free package is recommended for new designs. M9999-032006 2 hbwhelp@micrel.com or (408) 955-1690

SY10E164 Micrel, Inc. SY100E164 TRUTH TABLE SEL3 SEL2 SEL1 SEL0 Data SEL3 SEL2 SEL1 SEL0 Data L L L L A0 H L L L A8 L L L H A1 H L L H A9 L L H L A2 H L H L A10 L L H H A3 H L H H A11 L H L L A4 H H L L A12 L H L H A5 H H L H A13 L H H L A6 H H H L A14 L H H H A7 H H H H A15 DC ELECTRICAL CHARACTERISTICS VEE = VEE (Min.) to VEE (Max.); VCC = VCCO = GND TA = 0°C TA = +25°C TA = +85°C Symbol Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Unit Condition IIH Input HIGH Current — — 150 — — 150 — — 150 µA — IEE Power Supply Current mA — 10E — 59 71 — 59 71 — 59 71 100E — 59 71 — 59 71 — 68 81 AC ELECTRICAL CHARACTERISTICS VEE = VEE (Min.) to VEE (Max.); VCC = VCCO = GND TA = 0°C TA = +25°C TA = +85°C Symbol Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Unit Condition tPD Propagation Delay to Output ps — A Input 350 600 850 350 600 850 350 600 850 SEL0 500 700 900 500 700 900 500 700 900 SEL1 400 675 900 400 675 900 400 675 900 SEL2 400 675 900 400 675 900 400 675 900 SEL3 400 550 700 400 550 700 400 550 700 tskew Within-Device Skew — 50 — — 50 — — 50 — ps 1 tr Rise/Fall Times 275 400 550 275 400 550 275 400 550 ps — tf 20–80% Note: 1. Within-device skew is defined as the difference in the A to Q delay between the 16 different A inputs. M9999-032006 3 hbwhelp@micrel.com or (408) 955-1690

SY10E164 Micrel, Inc. SY100E164 28-PIN PLCC (J28-1) Rev. 03 MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 USA TEL + 1 (408) 944-0800 FAX + 1 (408) 474-1000 WEB http://www.micrel.com The information furnished by Micrel in this data sheet is believed to be accurate and reliable. However, no responsibility is assumed by Micrel for its use. Micrel reserves the right to change circuitry and specifications at any time without notification to the customer. Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser’s use or sale of Micrel Products for use in life support appliances, devices or systems is at Purchaser’s own risk and Purchaser agrees to fully indemnify Micrel for any damages resulting from such use or sale. © 2006 Micrel, Incorporated. M9999-032006 4 hbwhelp@micrel.com or (408) 955-1690