STPS30H100C Datasheet 100 V power Schottky rectifier Features A1 K A2 • Negligible switching losses • Low leakage current • Good trade off between leakage current and forward voltage drop K • Avalanche rated • ECOPACK®2 compliant A2 A2 K K A1 A1 Applications TO-220AB TO-247 • Switching diode • SMPS • DC/DC converter • LED lighting Description This dual Schottky rectifier is designed for high frequency miniature switch mode power supplies such as adaptors and on-board DC-DC converters. Packaged in TO-200AB and TO-247, this STPS30H100C is optimized for use in high frequency inverters. Product status link STPS30H100C Product summary IF(AV) 2 x 15 A VRRM 100 V Tj (max) 175 °C VF (typ) 0.64 V DS1560 - Rev 9 - June 2018 www.st.com For further information contact your local STMicroelectronics sales office.

STPS30H100C Characteristics 1 Characteristics Table 1. Absolute Ratings (limiting values at 25 °C, unless otherwise specified) Symbol Parameter Value Unit VRRM Repetitive peak reverse voltage 100 V IF(RMS) Forward rms current 30 A TC = 155 °C Per diode 15 IF(AV) Average forward current, δ = 0.5 A TC = 150 °C Per device 30 IFSM Surge non repetitive forward current tp = 10 ms sinusoidal 250 A PARM Repetitive peak avalanche power tp = 10 µs , Tj = 125 °C 778 W Tstg Storage temperature range -65 to +175 °C Tj Maximum operating junction temperature(1) +175 °C 1. (dPtot/dTj) < (1/Rth(j-a)) condition to avoid thermal runaway for a diode on its own heatsink. Table 2. Thermal resistance parameter Symbol Parameter Value Unit Per diode 1.6 Rth(j-c) Junction to case °C/W Total 0.9 Rth(c) Coupling 0.10 °C/W When the diodes 1 and 2 are used simultaneously : ΔTj(diode 1) = P(diode1) x R (Per diode) + P(diode 2) x R th(j-c) th(c) DS1560 - Rev 9 page 2/12

STPS30H100C Characteristics Table 3. Static electrical characteristics (per diode) Symbol Parameter Test conditions Min. Typ. Max. Unit Tj = 25 °C - 5 µA IR(1) Reverse leakage current VR = VRRM Tj = 125 °C - 2 6 mA Tj = 25 °C - 0.80 IF = 15 A Tj = 125 °C - 0.64 0.67 VF(2) Forward voltage drop V Tj = 25 °C - 0.93 IF = 30 A Tj = 125 °C - 0.74 0.80 1. Pulse test: tp = 5 ms, δ < 2% 2. Pulse test: tp = 380 µs, δ < 2% To evaluate the conduction losses use the following equation: P = 0.54 x I + 0.0086 I 2 F(AV) F (RMS) For more information, please refer to the following application notes related to the power losses : • AN604: Calculation of conduction losses in a power rectifier • AN4021: Calculation of reverse losses on a power diode DS1560 - Rev 9 page 3/12

STPS30H100C Characteristics (curves) 1.2 Characteristics (curves) Figure 1. Average forward power dissipation versus Figure 2. Average forward current versus ambient average forward current (per diode) temperature (δ= 0.5, per diode) PF(AV)(W) IF(AV)(A) 14 18 δ= 0.1 δ= 0.2 δ= 0.5 R =R 12 δ= 0.05 16 th(j-a) th(j-c) 14 10 δ= 1 12 8 10 Rth(j-a) = 15 °C/W 6 8 6 4 T 4 T 2 2 0 IF(AV)(A) δ=tp/T tp 0 δ=tp/T tp Tamb(°C) 0 2 4 6 8 10 12 14 16 18 20 0 25 50 75 100 125 150 175 Figure 3. Normalized avalanche power derating versus Figure 4. Relative variation of thermal impedance junction pulse duration (Tj= 125 °C) to case versus pulse duration PARM(tp) Zth(j-c)/Rth(j-c) P (10 µs) 1.0 1 ARM 0.8 0.1 0.6 0.4 0.01 0.2 Single pulse tp(s) 0.0 t(µs) p 1E-4 1E-3 1E-2 1E-1 1E+0 0.001 1 10 100 1000 DS1560 - Rev 9 page 4/12

STPS30H100C Characteristics (curves) Figure 5. Reverse leakage current versus reverse voltage applied (typical values, per diode) Figure 6. Junction capacitance versus reverse voltage applied (typical values, per diode) IR(mA) C(pF) 2E+0 1000 1E+0 Tj=125°C F=1 MHz VOSTC=j=3205m°CVRMS 1E-1 500 1E-2 1E-3 Tj=25°C 200 1E-4 VR(V) 1E-5 100 VR(V) 0 10 20 30 40 50 60 70 80 90 100 1 2 5 10 20 50 100 Figure 7. Forward voltage drop versus forward current (maximum values, per diode) IFM(A) 200 100 Tj=125°C Tj=25°C 10 VFM(V) 1 0.0 0.2 0.44 0.6 0.8 1.0 1.2 1.4 1.6 1.8 DS1560 - Rev 9 page 5/12

STPS30H100C Package information 2 Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. 2.1 TO-247 package information • Epoxy meets UL94, V0 • Cooling method: by conduction (C) • Recommended torque value: 0.8 N·m • Maximum torque value: 1.0 N·m Figure 8. TO-247 package outline Heat-sink plane A E ∅P S ∅R D L2 L1 b1 L b2 1 2 3 3 2 1 b c A1 Back view e DS1560 - Rev 9 page 6/12

STPS30H100C TO-247 package information Table 4. TO-247 package mechanical data Dimensions Ref. Millimeters Inches Min. Typ. Max. Min. Typ. Max. A 4.85 5.15 0.191 0.203 A1 2.20 2.60 0.086 0.102 b 1.00 1.40 0.039 0.055 b1 2.00 2.40 0.078 0.094 b2 3.00 3.40 0.118 0.133 c 0.40 0.80 0.015 0.031 D 19.85 20.15 0.781 0.793 E 15.45 15.75 0.608 0.620 e 5.30 5.45 5.60 0.209 0.215 0.220 L 14.20 14.80 0.559 0.582 L1 3.70 4.30 0.145 0.169 L2 18.50 0.728 ØP 3.55 3.65 0.139 0.143 ØR 4.50 5.50 0.177 0.217 S 5.30 5.50 5.70 0.209 0.216 0.224 1. Inches dimensions given for reference only DS1560 - Rev 9 page 7/12

STPS30H100C TO-220AB package information 2.2 TO-220AB package information • Cooling method: by conduction (C) • Epoxy meets UL 94,V0 • Recommended torque value: 0.55 N·m • Maximum torque value: 0.70 N·m Figure 9. TO-220AB package outline DS1560 - Rev 9 page 8/12

STPS30H100C TO-220AB package information Table 5. TO-220AB package mechanical data Dimensions Ref. Millimeters Inches Min. Max. Min. Max. A 4.40 4.60 0.173 0.181 b 0.61 0.88 0.240 0.035 b1 1.14 1.55 0.045 0.061 c 0.48 0.70 0.019 0.028 D 15.25 15.75 0.600 0.620 D1 1.27 typ. 0.050 typ. E 10.00 10.40 0.394 0.409 e 2.40 2.70 0.094 0.106 e1 4.95 5.15 0.195 0.203 F 1.23 1.32 0.048 0.052 H1 6.20 6.60 0.244 0.260 J1 2.40 2.72 0.094 0.107 L 13.00 14.00 0.512 0.551 L1 3.50 3.93 0.138 0.155 L20 16.40 typ. 0.646 typ. L30 28.90 typ. 1.138 typ. θP 3.75 3.85 0.148 0.152 Q 2.65 2.95 0.104 0.116 DS1560 - Rev 9 page 9/12

STPS30H100C Ordering information 3 Ordering information Table 6. Ordering information Order code Marking Package Weight Base qty. Delivery mode STPS30H100CT STPS30H100CT TO-220AB 1.95 g 50 Tube STPS30H100CW STPS30H100CW TO-247 4.36 g 30 Tube DS1560 - Rev 9 page 10/12

STPS30H100C Revision history Table 7. Document revision history Date Revision Changes Jul-2003 5E Previous release 30-Mar-2011 6 Added I2PAK package. 15-Sep-2011 7 Added TO-220AB narrow leads package. Updated Table 5. 21-Jun-2012 8 Added minimum value for Tj in Table 2. 01-Jun-2018 9 Updated PARM value and removed "Normalized avalanche power derating" curves. Removed I2PAK package information. DS1560 - Rev 9 page 11/12

STPS30H100C IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2018 STMicroelectronics – All rights reserved DS1560 - Rev 9 page 12/12

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: S TMicroelectronics: STPS30H100CT STPS30H100CW STPS30H100CR STPS30H100CTN