SSPPNN1155 SSeerriieess 1155 WWAATTTT,, UUnniivveerrssaall IInnppuutt FFuullllyy EEnncclloosseedd SSwwiittcchhiinngg PPoowweerr SSuuppppllyy EELLEECCTTRRIICCAALLSSPPEECCIIFFIICCAATTIIOONNSS All specifications are typical at nominal input, full load IINNPPUUTTSSPPEECCIIFFIICCAATTIIOONNSS Input Voltage………..........................85 ~ 264VAC Input Frequency............................... 47 ~ 63Hz Input Current………………………….0.55 ~ 1.0A Typ. InrushCurrent 16A~39ATyp OOUUTTPPUUTTSSPPEECCIIFFIICCAATTIIOONNSS FEATURES Output Voltage ……………………….See Chart Voltage Adjustment.………………….±10% Minimum Load……………………….. 0A 15 WATT OUTPUT POWER Efficiency..................................……..75 ~ 80% Over-Voltage Protection...…………..115 ~ 150% Manual Reset UNIVERSAL INPUT Over-Current Protection………….....Automatic Recovery (105% min) Ripple and Noise…………………….100mVp-p max. Hold-Up Time.......................…….....40 ~ 50 mS OVERVOLTAGE PROTECTION Line/Load Regulation...............…… See Chart Rise Time...…...……………………...800 ~ 1700 mS OVERCURRENT PROTECTION Leakage Current (100/230VAC)………….0.75mA LIGHTWEIGHT CONSTRUCTION GGEENNEERRAALLSSPPEECCIIFFIICCAATTIIOONNSS MET AL CHASSIS WITH COVER MTBF.............................…………….>160,000 Hours COMPACT, LOW-PROFILE PACKAGES Isolation Voltage Primary to Secondary……………3000VAC Primary to Case………………….1500VAC 3 YEAR WARRANTY Secondary to Case………………500VAC Isolation Resistance………………….100 M-Ohms min. EENNVVIIRROONNMMEENNTTAALLSSPPEECCIIFFIICCAATTIIOONNSS Operating Temperature ............…….0°C ~ +60°C Cooling………………….....................Convection SSAAFFEETTIIEESS//AAPPPPRROOVVAALLSS Temperature Coefficient................... 0.02% / °C Humidity………………......................20 ~ 85%Rh (non-condensing) Storage Temperature………………..-20°C ~ +85°C Shock Vibration………………………Shock: 20G(3 Directions each 3 times) Vibration: 10 ~ 55Hz PPHHYYSSIICCAALLSSPPEECCIIFFIICCAATTIIOONNSS Metal Enclosed – Terminal Block 1

MODEL Output Voltage Output Current Efficiency Load Regulation (85 ~ 264 VAC) (%) (mV max) SPN15-05S 5VDC 3.0A 75% 10mV max SP N15-12S 12VDC 1.25A 78% 10 mV max SPN15-15S 15VDC 1.0A 79% 10mV max SPN15-24S 24VDC 0.65A 80% 20mV max SP N15-48S 48VDC 0.3A 80% 40mV max Note: • Mounting screws not to exceed max penetration of 6mm • Screw thread size is M3 (Metric) or 6/32nd (Inch) • Weight 200g typ. • Measurements in millimeter (mm) unless otherwise specified • Tolerance ± 1mm NOTE: All specifications typical and nominal / full load and 25°C unless otherwise noted. Avoid sustained operation in overload or dead short conditions. Specifications subject to changes without notice. 2