General Purpose Relays PCB Relays SCHRACK Power PCB Relay RT1 n 1 pole 12A/16A, 1 form C (CO) or 1 form A (NO) contact n DC or AC coil n 5kV/10mm coil-contact, reinforced insulation n Ambient temperature 85°C (DC coil) n WG version: product in accordance to IEC 60335-1 n Reflow version: for THR (Through-Hole Reflow) soldering process Typical applications Boiler control, timers, garage door control, POS automation, interface F0144-C modules Z b Approvals Contact Data (continued) VDE Cert. No. 40007571, cULus E214025, cCSAus 1142018; Mechanical endurance CQC in preparation DC coil >30x106 operations Technical data of approved types on request AC coil >10x106 operations AC coil, reflow version >5x106 operations Contact Data 12A 16A Contact arrangement 1 form C (CO) or 1 form A (NO) Rated voltage 250VAC Coil Data Max. switching voltage 400VAC Coil voltage range, DC coil/ AC coil 5 to 110VDC / 24 to 230VAC Rated current 12A 16A Operative range, IEC 61810 2 Limiting continuous current 12A 16A, UL: 20A Coil insulation system according UL class F Limiting making current max. 4s, duty factor 10% 25A 30A Coil versions, DC coil Breaking capacity max. 3000VA 4000VA Coil Rated Operate Release Coil Rated coil Contact material AgNi 90/10, AgNi 90/10 gold plated code voltage voltage voltage resistance power Frequency of operation, with/without load VDC VDC VDC Ω±10%2) mW DC coil 360/72000h-1 005 5 3.5 0.5 62 403 AC coil 360/36000h-1 006 6 4.2 0.6 90 400 Operate/release time max., DC coil 8/6ms 009 9 6.3 0.9 200 400 Bounce time max., DC coil, form A/form B 4/6ms 012 12 8.4 1.2 360 400 Electrical endurance see electrical endurance graph1) 020 20 14.0 2.0 952 420 Contact ratings 024 24 16.8 2.4 1440 400 Type Contact Load Cycles 048 48 33.6 4.8 5520 417 IEC 61810 060 60 42.0 6.0 85702) 420 RT314 DC-coil A (NO) 16A, 250VAC, cosφ=1, 85°C 30x103 110 110 77.0 11.0 288002) 420 RT314 DC-coil C (CO) 16A, 250VAC, cosφ=1, 85°C 10x103 2) Coil resistance ±12%. RT314 DC-coil A (NO) 10A, 400VAC, cosφ=1, 85°C 150x103 All figures are given for coil without pre-energization, at ambient temperature +23°C. RT114 DC-coil A (NO) 12A, 250VAC, cosφ=1, 85°C 50x103 Other coil voltages on request. RT114 AC-coil A (NO) 12A, 250VAC, cosφ=1, 70°C 100x103 Coil versions, AC coil 50/60 Hz UL 508 Coil Rated Operate Release Coil Rated coil RT314 A/B (NO/NC) 20A, 250VAC, general purpose, 85°C 6x103 code voltage voltage voltage resistance power RT334 A (NO) 16A, 250VAC, gen. purpose, 85°C 50x103 VAC VAC VAC Ω±15%3) VA RT314 A (NO) 1hp, 240VAC, 40°C 1x103 524 24 18.0 3.6 3503) 0.76 RT314 A (NO) FLA/LRA, 4.5/13.1A, 480VAC, 70°C 100x103 615 115 86.3 17.3 8100 0.76 EN60947-5-1 620 120 90.0 18.0 8800 0.75 RT314 DC-coil A/B (NO/NC) 2A, 24VDC, DC13 6.050 700 200 150.0 30.0 24350 0.76 EN60730-1 730 230 172.5 34.5 32500 0.74 RT314 DC-coil A (NO) 12(2)A, 250VAC, 85°C 100x103 3) Coil resistance ±10%. 1) For reflow solderable versions: actual contact performance may be influenced by the All figures are given for coil without pre-energization, at ambient temperature +23°C, 50 Hz. reflow soldering process. Other coil voltages on request. 1 10-2014, Rev. 1014 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec- www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications © 2014 Tyco Electronics Corporation, only together with the ‘Definitions’ section. the ‘Definitions’ section, available at are subject to change. a TE Connectivity Ltd. company http://relays.te.com/definitions

General Purpose Relays PCB Relays SCHRACK Power PCB Relay RT1 (Continued) Insulation Data Other Data (continued) Initial dielectric strength Terminal type between open contacts 1000Vrms standard version PCB-THT, plug-in between contact and coil 5000Vrms reflow version PCB-THR Clearance/creepage Mounting distance AC coil: ≥2.5mm between contact and coil ≥10/10mm Weight 14g Material group of insulation parts IIIa Resistance to soldering heat THT, IEC 60068-2-20 Tracking index of relay base PTI 250V RTII 270°C/10s reflow version PTI 175V RTIII 260°C/5s Resistance to soldering heat THR reflow soldering (for reflow version) forced gas convection 4) or Other Data vapour phase 5) Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content temperature profile according EN61730 refer to the Product Compliance Support Center at Packaging/unit tube/20 pcs., box/500 pcs. www.te.com/customersupport/rohssupportcenter 4) infrared heating not allowed Resistance to heat and fire 5) recommended fluid LS/230 WG version or Reflow version according EN60335, par30 Ambient temperature Accessories DC coil -40 to 85°C For details see datasheet A ccessories Industrial Power Relay RT AC coil -40 to 70°C NOTE: indicated contact ratings and electrical endurance data for direct Category of environmental protection, IEC 61810 wiring of relays (according IEC 61810-1); for relays mounted on sockets standard version RTII - flux proof, RTIII - wash tight deratings may apply. reflow version RTII - flux proof Vibration resistance (functional) form A/form B contact, 30 to 500Hz 20g/5g Shock resistance (destructive) 100g PCB layout / terminal assignment *) With the recommended PCB hole sizes a grid Bottom view on solder pins pattern from 2.5 mm to 2.54 mm can be used. 12 A, pinning 3.5 mm 12 A, pinning 5 mm 16 A, pinning 5 mm S0418-CB S0418-CN S0418-CA 1 form C (CO) contact 1 form C (CO) contact 1 form C (CO) contact S0163-BG S0163-BC S0163-BE 1 form A (NO) contact 1 form A (NO) contact 1 form A (NO) contact S0163-BH S0163-BD S0163-BF 2 10-2014, Rev. 1014 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec- www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications © 2014 Tyco Electronics Corporation, only together with the ‘Definitions’ section. the ‘Definitions’ section, available at are subject to change. a TE Connectivity Ltd. company http://relays.te.com/definitions

General Purpose Relays PCB Relays SCHRACK Power PCB Relay RT1 (Continued) Dimensions THT version THR version (reflow solderable) S0272-BB S0272-BRB Process conditions for Reflow soldering according to EN61760-1 Product code structure Typical product code RT 3 1 4 024 Type RT Power PCB Relay RT1 Version 1 12A, pinning 3.5mm, flux proof 2 12A, pinning 5mm, flux proof *) 3 16A, pinning 5mm, flux proof B 12A, pinning 3.5mm, wash tight D 16A, pinning 5mm, wash tight Contact arrangement 1 1 form C (CO) contact 3 1 form A (NO) contact Contact material 4 AgNi 90/10 5 AgNi 90/10 gold plated (for type RT31.) Coil Coil code: please refer to coil versions table Version Blank Standard version WG Product in accordance with IEC 60335-1 (domestic appliances) R Reflow solderable *) Wash tight version on request 3 10-2014, Rev. 1014 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec- www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications © 2014 Tyco Electronics Corporation, only together with the ‘Definitions’ section. the ‘Definitions’ section, available at are subject to change. a TE Connectivity Ltd. company http://relays.te.com/definitions

General Purpose Relays PCB Relays SCHRACK Power PCB Relay RT1 (Continued) Product code Version Contacts Contact material Coil Version Part number RT114009 12A, pinning 3.5mm, 1 form C (CO) AgNi 90/10 9VDC Standard 1393239-9 RT114012 flux proof contact 12VDC 1419108-1 RT114012WG IEC60335-1 compliant 7-1415538-6 RT114024 24VDC Standard 1-1393239-3 RT114024WG IEC60335-1 compliant 1415539-4 RT114730 230VAC Standard 1-1393239-9 RT115024 AgNi 90/10 gold pl. 24VDC 2-1393239-1 RT134012 1 form A (NO) AgNi 90/10 12VDC 2-1393239-6 RT134024 contact 24VDC 3-1393239-0 RT214012 12A, pinning 5mm, 1 form C (CO) 12VDC 5-1393239-4 RT214024 flux proof contact 24VDC 5-1393239-5 RT214524 24VAC 5-1393239-9 RT214730 230VAC 1419108-6 RT314005 16A, pinning 5mm, 5VDC 9-1393239-1 RT314006 flux proof 6VDC 9-1393239-3 RT314012 12VDC 9-1393239-5 RT314012WG IEC60335-1 compliant 8-1415535-6 RT314024 24VDC Standard 9-1393239-8 RT314024WG IEC60335-1 compliant 1415538-7 RT314048 48VDC Standard 1393240-1 RT314730 230VAC 1393240-7 RT315024 AgNi 90/10 gold pl. 24VDC 1-1393240-4 RT334009WG 1 form A (NO) AgNi 90/10 9VDC IEC60335-1 compliant 3-1415538-1 RT334012 contact 12VDC Standard 4-1393240-5 RT334012WG IEC60335-1 compliant 1-1415527-1 RT334024 24VDC Standard 4-1393240-8 RT334048 48VDC 5-1393240-0 RTB14005 12A, pinning 3.5mm, 1 form C (CO) 5VDC 1-1393238-2 RTB14012 wash tight contact 12VDC 1-1393238-5 RTB14024 24VDC 1-1393238-9 RTB14524 24VAC 2-1393238-4 RTD14005 16A, pinning 5mm, 5VDC 5-1393238-9 RTD14012 wash tight 12VDC 6-1393238-2 RTD14024 24VDC 6-1393238-8 RTD14048 48VAC 6-1393238-9 RTD34012 1 form A (NO) 12VDC 3-1419108-5 RTD34024 contact 24VDC 3-1419108-8 This list represents the most common types and does not show all variants covered by this datasheet. Other types on request 4 10-2014, Rev. 1014 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec- www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications © 2014 Tyco Electronics Corporation, only together with the ‘Definitions’ section. the ‘Definitions’ section, available at are subject to change. a TE Connectivity Ltd. company http://relays.te.com/definitions

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: T E Connectivity: RTD14024