Metallized Polypropylene Film EMI Suppression Capacitors R46 (Miniature), Class X2, 275 VAC, 110°C Overview Applications The R46 series is constructed of metallized polypropylene For worldwide use in electromagnetic interference (EMI) film encapsulated with self-extinguishing resin in a box of suppression in across-the-line applications that require X2 material that meets the requirements of UL 94 V–0. safety classification. Intended for use in situations in which capacitor failure would not result in exposure to electric shock. Not for use in "series with mains" type applications. Benefits • Approvals: ENEC, UL, cUL, CQC • X2 CLASS (IEC 60384-14) • Rated voltage: 275 VAC 50/60 Hz • Capacitance range: 0.033 – 10 µF • Lead spacing: 10.0 – 37.5 mm • Capacitance tolerance: ±20%, ±10% • Climatic category 40/110/56, IEC 60068–1 • Tape & Reel in accordance with IEC 60286–2 • RoHS compliant and lead-free terminations • Operating temperature range of −40°C to +110°C • 100% screening factory test at 2,200 VDC/1,500 VAC • Self healing properties Part Number System R46 K I 3470 00 P0 M Rated Voltage Lead Spacing Capacitance Capacitance Series Packaging Internal Use (VAC) (mm) Code (pF) Tolerance X2, Metallized K = 275 F = 10.0 The last three See Ordering P0 K = ±10% Polypropylene I = 15.0 digits represent Options Table P1 M = ±20% N = 22.5 significant figures. P2 R = 27.5 The first digit P3 W = 37.5 specifies number of zeros to be added. One world. One KEMET © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3094_R46_X2_275_110C_MIN • 4/3/2020 1 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Metallized Polypropylene Film EMI Suppression Capacitors R46 (Miniature), Class X2, 275 VAC, 110°C Ordering Options Table Lead Spacing Lead and Lead Length Nominal Type of Leads and Packaging Packaging (mm) (mm) Code Standard Lead and Packaging Options Bulk (Bag) – Short Leads 4 +2/-0 00 Ammo Pack H = 18.5 ±0.5 DQ 0 Other Lead and Packaging Options Tape & Reel (Large Reel) H = 18.5 ±0.5 CK 0 Bulk (Bag) – Short Leads 2.7 +0.5/−0 JA 10 Bulk (Bag) – Short Leads 3.5 +0.5/−0 JB 15 Bulk (Bag) – Short Leads 4.0 +0.5/−0 JE 22.5 Bulk (Bag) – Short Leads 3.2 +0.3/−0.2 JH Bulk (Bag) – Long Leads 18 ±1 JM Bulk (Bag) – Long Leads 30 +5/−0 40 Bulk (Bag) – Long Leads 25 +2/−1 50 Bulk (Bag) – Insulated Rigid Leads 30 +5/−0 (sp 8 ±2) 51 Bulk (Bag) – Insulated Flexible Leads 150 ±5 (sp 8 ±2) 52 Standard Lead and Packaging Options Bulk (Bag) – Short Leads 4 +2/−0 00 Tape & Reel (Large Reel) H= 18.5 ±0.5 CK1 0 Other Lead and Packaging Options Bulk (Tray) – Short Leads 2.7 +0.5/−0 JA Bulk (Tray) – Short Leads 3.5 +0.5/−0 JB 27.5 Bulk (Tray) – Short Leads 4.0 +0.5/−0 JE Bulk (Tray) – Short Leads 3.2 +0.3/−0.2 JH Bulk (Tray) – Long Leads 18 ±1 JM Bulk (Tray) – Long Leads 30 +5/−0 40 Bulk (Tray) – Long Leads 25 +2/−1 50 Bulk (Bag) – Insulated Rigid Leads 30 +5/−0 (sp 8 ±2) 51 Bulk (Bag) – Insulated Flexible Leads 150 ±5 (sp 8 ±2) 52 Standard Lead and Packaging Options Bulk (Tray) – Short Leads 4 +2/−0 00 Other Lead and Packaging Options Bulk (Tray) – Short Leads 2.7 +0.5/−0 JA Bulk (Tray) – Short Leads 3.5 +0.5/−0 JB Bulk (Tray) – Short Leads 4.0 +0.5/−0 JE 37.5 Bulk (Tray) – Short Leads 3.2 +0.3/−0.2 JH Bulk (Tray) – Long Leads 18 ±1 JM Bulk (Tray) – Long Leads 30 +5/−0 40 Bulk (Tray) – Long Leads 25 +2/−1 50 Bulk (Bag) – Insulated Rigid Leads 30 +5/−0 (sp 8 ±2) 51 Bulk (Bag) – Insulated Flexible Leads 150 ±5 (sp 8 ±2) 52 1 Not for all sizes, see "Packaging Quantities" table. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3094_R46_X2_275_110C_MIN • 4/3/2020 2 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Metallized Polypropylene Film EMI Suppression Capacitors R46 (Miniature), Class X2, 275 VAC, 110°C Dimensions – Millimeters Loose Insulated Rigid Leads Insulated Flexible Leads 0.5 mm2 FRONT VIEW SIDE VIEW FRONT VIEW SIDE VIEW FRONT VIEW SIDE VIEW L B L B L B H H H d LL p 5 +0/− 0 ±5 35 15 2 2 ± ± d 8 8 p B H L d Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance 10.0 ±0.4 4.0 +0.2/−0.5 9.0 +0.1/−0.5 13.0 +0.2/−0.5 0.6 ±0.05 10.0 ±0.4 5.0 +0.2/−0.5 11.0 +0.1/−0.5 13.0 +0.2/−0.5 0.6 ±0.05 10.0 ±0.4 6.0 +0.2/−0.5 12.0 +0.1/−0.5 13.0 +0.2/−0.5 0.6 ±0.05 15.0 ±0.4 5.0 +0.2/−0.5 11.0 +0.1/−0.5 18.0 +0.3/−0.5 0.6 ±0.05 15.0 ±0.4 6.0 +0.2/−0.5 12.0 +0.1/−0.5 18.0 +0.3/−0.5 0.6 ±0.05 15.0 ±0.4 6.0 +0.2/−0.5 17.5 +0.1/−0.5 18.0 +0.3/−0.5 0.6 ±0.05 15.0 ±0.4 7.5 +0.2/−0.5 13.5 +0.1/−0.5 18.0 +0.5/−0.5 0.6 ±0.05 15.0 ±0.4 7.5 +0.2/−0.5 18.5 +0.1/−0.5 18.0 +0.5/−0.5 0.8 ±0.05 15.0 ±0.4 8.5 +0.2/−0.5 14.5 +0.1/−0.5 18.0 +0.5/−0.5 0.6 ±0.05 15.0 ±0.4 9.0 +0.2/−0.5 12.5 +0.1/−0.5 18.0 +0.5/−0.5 0.6 ±0.05 15.0 ±0.4 10.0 +0.2/−0.5 16.0 +0.1/−0.5 18.0 +0.5/−0.5 0.8 ±0.05 15.0 ±0.4 11.0 +0.2/−0.5 19.0 +0.1/−0.5 18.0 +0.5/−0.5 0.8 ±0.05 22.5 ±0.4 6.0 +0.2/−0.5 15.0 +0.1/−0.5 26.5 +0.3/−0.5 0.8 ±0.05 22.5 ±0.4 7.0 +0.2/−0.5 16.0 +0.1/−0.5 26.5 +0.3/−0.5 0.8 ±0.05 22.5 ±0.4 8.5 +0.2/−0.5 17.0 +0.1/−0.5 26.5 +0.3/−0.5 0.8 ±0.05 22.5 ±0.4 10.0 +0.2/−0.5 18.5 +0.1/−0.5 26.5 +0.3/−0.5 0.8 ±0.05 22.5 ±0.4 11.0 +0.2/−0.5 20.0 +0.1/−0.5 26.5 +0.3/−0.5 0.8 ±0.05 22.5 ±0.4 13.0 +0.2/−0.5 22.0 +0.1/−0.5 26.5 +0.3/−0.5 0.8 ±0.05 27.5 ±0.4 9.0 +0.2/−0.7 17.0 +0.1/−0.7 32.0 +0.3/−0.7 0.8 ±0.05 27.5 ±0.4 11.0 +0.2/−0.7 20.0 +0.1/−0.7 32.0 +0.3/−0.7 0.8 ±0.05 27.5 ±0.4 13.0 +0.2/−0.7 22.0 +0.1/−0.7 32.0 +0.3/−0.7 0.8 ±0.05 27.5 ±0.4 14.0 +0.2/−0.7 28.0 +0.1/−0.7 32.0 +0.3/−0.7 0.8 ±0.05 27.5 ±0.4 18.0 +0.2/−0.7 33.0 +0.1/−0.7 32.0 +0.3/−0.7 0.8 ±0.05 27.5 ±0.4 22.0 +0.2/−0.7 37.0 +0.1/−0.7 32.0 +0.3/−0.7 0.8 ±0.05 37.5 ±0.4 11.0 +0.3/−0.7 22.0 +0.1/−0.7 41.5 +0.3/−0.7 1.0 ±0.05 37.5 ±0.4 13.0 +0.3/−0.7 24.0 +0.1/−0.7 41.5 +0.3/−0.7 1.0 ±0.05 37.5 ±0.4 16.0 +0.3/−0.7 28.5 +0.1/−0.7 41.5 +0.3/−0.7 1.0 ±0.05 37.5 ±0.4 19.0 +0.3/−0.7 32.0 +0.1/−0.7 41.5 +0.3/−0.7 1.0 ±0.05 37.5 ±0.4 20.0 +0.3/−0.7 40.0 +0.1/−0.7 41.5 +0.3/−0.7 1.0 ±0.05 Note: See Ordering Options Table for lead length (LL/H) options. 0 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3094_R46_X2_275_110C_MIN • 4/3/2020 3 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Metallized Polypropylene Film EMI Suppression Capacitors R46 (Miniature), Class X2, 275 VAC, 110°C Performance Characteristics Dielectric Polypropylene film Plates Metal layer deposited by evaporation under vacuum Winding Non-inductive type Leads Tinned wire Protection Plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL94. Related Documents IEC 60384-14, EN 60384-14 Rated Voltage V 275 VAC (50/60 Hz), 560 VDC R Capacitance Range 0.033 – 10 µF Capacitance Values E6 series (IEC 60063) measured @ 1 kHz and +20 ±1°C Capacitance Tolerance ±10%, ±20% Temperature Range −40ºC to +110°C Climatic Category 40/110/56 IEC 60068-1 Storage time: ≤ 24 months from the date marked on the label package Average relative humidity per year ≤ 70% Storage Conditions RH ≤ 85% for 30 days randomly distributed throughout the year Dew is absent Temperature: −40 to 80°C (see "Maximum Humidity in Storage Conditions" graph below) Approvals ENEC, UL, cUL, CQC Dissipation Factor (tanδ) ≤ 0.1% (0.06%*) at 1 kHz , +25°C ±5°C (* typical value) The 100% screening factory test is carried out at 2,200 VDC/1,500 VAC. The voltage level is selected to meet the requirements in applicable equipment standards. Test Voltage Between Terminals All electrical characteristics are checked after the test. This test cannot be repeated, as there is a risk of damaging the capacitor. KEMET is not liable in such cases for any failures. Measured at +25°C ±5°C, according to IEC 60384–2 Minimum Values Between Terminals Insulation Resistance Voltage Charge Voltage Charge Time C ≤ 0.33 μF C > 0.33 μF ≥ 1 • 105 MΩ ≥ 30,000 MΩ • µF 100 VDC 1 minute ( ≥ 5 • 105 MΩ )* ( ≥ 150,000 MΩ • µF )* In DC Applications Recommended voltage ≤ 560 VDC © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3094_R46_X2_275_110C_MIN • 4/3/2020 4 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Metallized Polypropylene Film EMI Suppression Capacitors R46 (Miniature), Class X2, 275 VAC, 110°C Performance Characteristics cont. Maximum Humidity in Storage Condition Maximum Overtemperature ∆T vs T 100 lim h 25 90 80 20 %) y (70 Humidit5600 T(°C)lim 15 ve 40 ∆ 10 Relati30 3A0n nDuaayls Average 5 20 10 0 0 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 −40 −20 0 20 40 60 80 Temperature (°C) Temperature Th(°C) Maximum I vs. T rms h 120% 100% 80% m Irms mu60% Maxi 40% 20% 0% 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 Temperature T(°C) h T is the maximum ambient temperature surrounding the capacitor or hottest contact point (e.g. tracks), whichever is higher, in the worst operation h conditions in °C. Impedance Graph © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3094_R46_X2_275_110C_MIN • 4/3/2020 5 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Metallized Polypropylene Film EMI Suppression Capacitors R46 (Miniature), Class X2, 275 VAC, 110°C Maximum Voltage (V ) Versus Frequency (Sinusoidal Waveform/Th ≤ 70°C) rms Lead Spacing 10 mm Lead Spacing 15 mm 1,000 1,000 100 100 ) ms ) ms Vr Vr ge ( ge ( Volta10 00..003437 µµFF Volta10 00..1353 µµFF 0.1 µF 0.47 µF 0.15 µF 0.68 µF 0.82 µF 1 1 0.1 1.0 10.0 100.0 0.1 1.0 10.0 100.0 Frequency (kHz) Frequency (kHz) Lead Spacing 22.5 mm Lead Spacing 27.5 mm 1,000 1,000 100 100 ) ms ) ms Vr Vr ge ( ge ( Volta10 0.14 7 µµFF Volta10 1 µF 1.5 µF 1.5 µF 2.2 µF 3.3 µF 4.7 µF 6.8 µF 1 1 0.1 1.0 10.0 100.0 0.1 1.0 10.0 100.0 Frequency (kHz) Frequency (kHz) Lead Spacing 37.5 mm 1,000 100 ) ms Vr ge ( Volta 10 2.2 µF 3.3 µF 4.7 µF 6.8 µF 10 µF 1 0.1 1.0 10.0 100.0 Frequency (kHz) © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3094_R46_X2_275_110C_MIN • 4/3/2020 6 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Metallized Polypropylene Film EMI Suppression Capacitors R46 (Miniature), Class X2, 275 VAC, 110°C Maximum Current (I ) Versus Frequency (Sinusoidal Waveform/Th ≤ 70°C) rms Lead Spacing 10 mm Lead Spacing 15 mm 10 10 1 1 A)rms A)rms Current ( Current ( 0.15 µF 0.33 µF 0.1 0.1 0.47 µF 0.033 µF 0.68 µF 0.047 µF 0.82 µF 0.1 µF 0.15 µF 0.01 0.01 0.1 1.0 10.0 100.0 0.1 1.0 10.0 100.0 Frequency (kHz) Frequency (kHz) Lead Spacing 22.5 mm Lead Spacing 27.5 mm 10 10 1 1 Current (A)rms 0112. ..4 52 7 µ µµ FµFF F Current (A)rms 1134 ... 537 µ µµµFFFF 6.8 µF 0.1 0.1 0.01 0.01 0.1 1.0 10.0 100.0 0.1 1.0 10.0 100.0 Frequency (kHz) Frequency (kHz) Lead Spacing 37.5 mm 10 1 2.2 µF A)rms 34..37 µµFF Current ( 61.08 µµFF 0.1 0.01 0.1 1.0 10.0 100.0 Frequency (kHz) © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3094_R46_X2_275_110C_MIN • 4/3/2020 7 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Metallized Polypropylene Film EMI Suppression Capacitors R46 (Miniature), Class X2, 275 VAC, 110°C Environmental Test Data Test IEC Publication Procedure 1.25 x V VAC 50 Hz, once every hour increase to 1,000 VAC for 0.1 Endurance EN/IEC 60384–14 R second, 1,000 hours at upper rated temperature Vibration IEC 60068–2–6 Test Fc 3 directions at 2 hours each 10 – 55 Hz at 0.75 mm or 98 m/s2 Bump IEC 60068–2–29 Test Eb 1,000 bumps at 390 m/s2 Change of Temperature IEC 60068–2–14 Test Na Upper and lower rated temperature 5 cycles Active Flammability IEC 60384–14 V + 20 surge pulses at 2.5 kV (pulse every 5 seconds) R Passive Flammability IEC 60384–14 IEC 60384–1, IEC 60695–11–5 Needle flame test Damp Heat Steady State IEC 60068–2–78 Test Cab +40°C and 93% RH, 56 days Approvals Mark Specification File Number EN/IEC 60384-14 V4413 UL 60384-14 and CAN/CSA E60384-14 E97797 (310 VAC) CQC08001026549 CQC11001060118 CQC13001087757 IEC 60384-14 CQC14001116028 CQC13001101266 CQC14001116000 Environmental Compliance All KEMET EMI capacitors are RoHS compliant. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3094_R46_X2_275_110C_MIN • 4/3/2020 8 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Metallized Polypropylene Film EMI Suppression Capacitors R46 (Miniature), Class X2, 275 VAC, 110°C Table 1 – Ratings & Part Number Reference Capacitance Dimensions in mm Lead Spacing dV/dt New KEMET Legacy Part Value (µF) B H L (p) (V/µs) Part Number Number 0.033 4.0 9.0 13.0 10.0 500 46KF2330(1)P0(2) R46KF2330(1)P0(2) 0.047 4.0 9.0 13.0 10.0 500 46KF2470(1)P0(2) R46KF2470(1)P0(2) 0.068 5.0 11.0 13.0 10.0 500 46KF2680(1)P0(2) R46KF2680(1)P0(2) 0.10 5.0 11.0 13.0 10.0 500 46KF3100(1)P1(3) R46KF3100(1)P1(3) 0.10 6.0 12.0 13.0 10.0 500 46KF3100(1)P0(2) R46KF3100(1)P0(2) 0.15 6.0 12.0 13.0 10.0 500 46KF3150(1)P0(3) R46KF3150(1)P0(3) 0.15 5.0 11.0 18.0 15.0 400 46KI3150(1)P0(2) R46KI3150(1)P0(2) 0.22 6.0 12.0 18.0 15.0 400 46KI3220(1)P0(2) R46KI3220(1)P0(2) 0.33 7.5 13.5 18.0 15.0 400 46KI3330(1)P0(2) R46KI3330(1)P0(2) 0.33 9.0 12.5 18.0 15.0 400 46KI3330(1)P1(2) R46KI3330(1)P1(2) 0.33 6.0 17.5 18.0 15.0 400 46KI3330(1)P2(2) R46KI3330(1)P2(2) 0.47 8.5 14.5 18.0 15.0 400 46KI3470(1)P0(2) R46KI3470(1)P0(2) 0.47 9.0 12.5 18.0 15.0 400 46KI3470(1)P1(3) R46KI3470(1)P1(3) 0.47 6.0 17.5 18.0 15.0 400 46KI3470(1)P2(3) R46KI3470(1)P2(3) 0.47 7.5 18.5 18.0 15.0 400 46KI3470(1)P3(2) R46KI3470(1)P3(2) 0.68 10.0 16.0 18.0 15.0 400 46KI3680(1)P1(3) R46KI3680(1)P1(3) 0.68 11.0 19.0 18.0 15.0 400 46KI3680(1)P0(2) R46KI3680(1)P0(2) 0.82 11.0 19.0 18.0 15.0 400 46KI3820(1)P0(3) R46KI3820(1)P0(3) 0.47 6.0 15.0 26.5 22.5 200 46KN3470(1)P1(2) R46KN3470(1)P1(2) 0.56 6.0 15.0 26.5 22.5 200 46KN3560(1)P1(3) R46KN3560(1)P1(3) 0.56 7.0 16.0 26.5 22.5 200 46KN3560(1)P0(2) R46KN3560(1)P0(2) 0.68 7.0 16.0 26.5 22.5 200 46KN3680(1)P0(2) R46KN3680(1)P0(2) 1.0 8.5 17.0 26.5 22.5 200 46KN4100(1)P1(3) R46KN4100(1)P1(3) 1.0 10.0 18.5 26.5 22.5 200 46KN4100(1)P0(2) R46KN4100(1)P0(2) 1.5 10.0 18.5 26.5 22.5 200 46KN4150(1)P1(3) R46KN4150(1)P1(3) 1.5 11.0 20.0 26.5 22.5 200 46KN4150(1)P0(2) R46KN4150(1)P0(2) 2.2 13.0 22.0 26.5 22.5 200 46KN4220(1)P0(3) R46KN4220(1)P0(3) 1.0 9.0 17.0 32.0 27.5 150 46KR4100(1)P0(2) R46KR4100(1)P0(2) 1.5 11.0 20.0 32.0 27.5 150 46KR4150(1)P0(2) R46KR4150(1)P0(2) 2.2 13.0 22.0 32.0 27.5 150 46KR4220(1)P0(2) R46KR4220(1)P0(2) 3.3 14.0 28.0 32.0 27.5 150 46KR4330(1)P0(2) R46KR4330(1)P0(2) 4.7 14.0 28.0 32.0 27.5 150 46KR4470(1)P1(3) R46KR4470(1)P1(3) 4.7 18.0 33.0 32.0 27.5 150 46KR4470(1)P0(2) R46KR4470(1)P0(2) 6.8 22.0 37.0 32.0 27.5 150 46KR4680(1)P0(2) R46KR4680(1)P0(2) 2.2 11.0 22.0 41.5 37.5 100 46KW4220(1)P0(2) R46KW4220(1)P0(2) 3.3 13.0 24.0 41.5 37.5 100 46KW4330(1)P0(2) R46KW4330(1)P0(2) 4.7 16.0 28.5 41.5 37.5 100 46KW4470(1)P0(2) R46KW4470(1)P0(2) 6.8 19.0 32.0 41.5 37.5 100 46KW4680(1)P0(2) R46KW4680(1)P0(2) 10.0 20.0 40.0 41.5 37.5 100 46KW5100(1)P0(2) R46KW5100(1)P0(2) Lead New KEMET Legacy Capacitance Value (µF) B (mm) H (mm) L (mm) dV/dt (V/µs) Spacing (p) Part Number Part Number (1) Insert lead and packaging code. See Ordering Options Table for available options. (2) M = ±20%, K = ±10% (3) M = ±20% (only available tolerance). © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3094_R46_X2_275_110C_MIN • 4/3/2020 9 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Metallized Polypropylene Film EMI Suppression Capacitors R46 (Miniature), Class X2, 275 VAC, 110°C Soldering Process The implementation of the RoHS directive has resulted in the selection of SnAuCu (SAC) alloys or SnCu alloys as primary solder material. This has increased the liquidus temperature from 183°C for SnPb eutectic alloys to 217 – 221°C for the new alloys. As a result, the heat stress to the components, even in wave soldering, has increased considerably due to higher pre- heat and wave temperatures. Polypropylene capacitors are especially sensitive to heat (the melting point of polypropylene is 160 – 170°C). Wave soldering can be destructive, especially for mechanically small polypropylene capacitors (with lead spacing of 5 – 15 mm). Great care must be taken during soldering. The recommended solder profiles from KEMET should be used. Consult KEMET with any questions. In general, the wave soldering curve from IEC Publication 61760-1 Edition 2 serves as a solid guideline for successful soldering. See Figure 1. Reflow soldering is not recommended for through-hole film capacitors. Exposing capacitors to a soldering profile in excess of the above-recommended limits may result to degradation of or permanent damage to the capacitors. Do not place the polypropylene capacitor through an adhesive curing oven to cure resin for surface mount components. Insert through-hole parts after curing surface mount parts. Consult KEMET to discuss the actual temperature profile in the oven, if through-hole components must pass through the adhesive curing process. A maximum two soldering cycles is recommended. Allow time for the capacitor surface temperature to return to normal temperature before performing the second soldering cycle. Manual Soldering Recommendations Wave Soldering Recommendations 300 Following is the recommendation for manual 2 +3 seconds maximum soldering with a soldering iron. 260°C 250 First Wave Second Wave Recommended Soldering Temperature 200 400 C) ∆T < 150°C Cooling mperature (°C)233505000 Temperature (° 110500 PreThpreehaetai1tn1g5° cccaaa 235.°°5CC°//Css/eescceoocnnoddnd typical Soldering Iron Bit Te112050000 500 0 40 80 120 160 200 240 50 Time (s) 0 0 1 2 3 4 5 6 7 8 Soldering Time (seconds) The soldering iron tip temperature should be set at 350°C (+10°C maximum), with the soldering duration not to exceed more than 3 seconds. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3094_R46_X2_275_110C_MIN • 4/3/2020 10 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Metallized Polypropylene Film EMI Suppression Capacitors R46 (Miniature), Class X2, 275 VAC, 110°C Soldering Process cont. Wave Soldering Recommendations cont. 1. The table indicates the maximum set-up temperature of the soldering process. Maximum Maximum Preheat Peak Soldering Dielectric Temperature Temperature Film Material Capacitor Capacitor Capacitor Capacitor Pitch Pitch Pitch Pitch ≤ 15 mm > 15 mm ≤ 15 mm > 15 mm Polyester 130°C 130°C 270°C 270°C Polypropylene 110°C 130°C 260°C 270°C Paper 130°C 140°C 270°C 270°C Polyphenylene 150°C 160°C 270°C 270°C Sulphide 2. The maximum temperature measured inside the capacitor: set the temperature so that the maximum temperature inside the element is below the limit. Maximum Temperature Dielectric Film Material Measured Inside the Element Polyester 160°C Polypropylene 110°C Paper 160°C Polyphenylene Sulphide 160°C Temperature monitored inside the capacitor. Selective Soldering Recommendations Selective dip soldering is a variation of reflow soldering. In this method, the printed circuit board with through-hole components to be soldered is preheated and transported over the solder bath as it is in normal flow soldering, without touching the solder. When the board is over the bath, it is stopped. Pre-designed solder pots are lifted from the bath with molten solder, only at the places of the selected components, and pressed against the lower surface of the board to solder the components. The temperature profile for selective soldering is similar to the double wave flow soldering outlined in this document. However, instead of two baths, there is only one with a time from 3 – 10 seconds. In selective soldering, the risk of overheating is greater than in double wave flow soldering, and great care must be taken so that the parts do not overheat. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3094_R46_X2_275_110C_MIN • 4/3/2020 11 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Metallized Polypropylene Film EMI Suppression Capacitors R46 (Miniature), Class X2, 275 VAC, 110°C Construction Detailed Cross Section Molded Plastic Single-sided Metallized Molded Plastic Self-Extinguishing Case Polypropylene Film Case Resin (First Layer) Single-sided Metallized Polypropylene Film (Second Layer) Margin Margin Metal Contact Metal Contact Layer Layer FILM WINDING SCHEME OPTIONS Margin Leads Single-sided Metallized Polypropylene Film Double-sided Metallized Polyester Film Winding Scheme Polypropylene Double-sided Film Dielectric Metallized Single-sided Single-sided Double-sided Polypropylene Polyester Carrier Metallized Metallized Metallized Film Dielectric Film Polypropylene Polypropylene Polyester Single-sided Film Film Carrier Metallized Film Polypropylene Film 1 Section 2 Sections 1 Section 2 Sections Polypropylene Double-sided Film Dielectric Metallized Single-sided Single-sided Double-sided Polypropylene Polyester Carrier Metallized Metallized Metallized Film Dielectric Film Polypropylene Polypropylene Polyester Single-sided Film Film Carrier Metallized Film Polypropylene Film 3 Sections 4 Sections 3 Sections 4 Sections Metallized Impregnated Paper Metallized Polyphenylene © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3094_R46_X2_275_110C_MIN • 4/3/2020 12 Polypropylene Film/Foil Sulfide Film (SMR) Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Single-sided Metallized Metal Foil Metal Foil Polypropylene Metallized Polypropylene Film Impregnated Metallized Polyphenyl- Film Dielectric Paper ene Sulfide Film with Polypropylene Vacuum-Evaporated Film Dielectric Aluminum Electrodes 1 Section 1 Section 1 Section 2 Sections Single-sided Metallized Polyester Film AXIAL - Polypropylene Film/Foil Single-sided Polypropylene Single-sided Metallized Film Dielec- Metallized Polyester tric Polypropylene Film Film Polypropylene 1 Section Metal Foil Metal Foil Film Dielectric 1 Section 2 Sections AXIAL - Single-sided Metallized AXIAL - Single-sided Metallized AXIAL - Double-sided Polypropylene Film Polyester Film Metallized Polyester Film Single-sided Single-sided Double-sided Polypropylene Metallized Metallized Metallized Film Dielectric Polypropylene Polyester Polyester Carrier Film Film Film Single-sided Metallized Polypropylene Film 1 Section 1 Section 2 Sections

Metallized Polypropylene Film EMI Suppression Capacitors R46 (Miniature), Class X2, 275 VAC, 110°C Marking Lead Spacing 10 mm FRONT TOP Capacitance Tolerance Approval Series, Marks Dielectric Code, Safety Class, Self Healing Manufacturer’s Capacitance, Logo Rated Voltage IEC Climatic Date Code Category Manufacturing NOTE: Hot imprinting with or without Plant Passive Flammability color or ink jet or laser marking Category: C for volume < 1750 mm3 Lead Spacing 15 mm, 22.5 mm, and 27.5 mm FRONT TOP Capacitance Tolerance Approval Series, Marks Dielectric Code, Safety Class, Self Healing Manufacturer’s Capacitance, Logo Rated Voltage IEC Climatic Date Code Category Manufacturing Passive Flammability Plant NOTE: Hot imprinting with or without Category: color or ink jet or laser marking B for volume ≥ 1750 mm3 C for volume < 1750 mm3 Lead Spacing 22.5 and 27.5 mm (alternatives*) and 37.5 mm FRONT TOP Series Dielectric Safety Self Code Class Healing Capacitance, Approval Manufacturer’s Capacitance Marks Logo Tolerance, Rated Voltage IEC Climatic Category QA Number Passive Flammability Manufacturing Date Code © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Category F3094_RP4la6n_tX2_275_110C_MIN • 4/3/2020 13 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com NOTE: Hot imprinting with or without color or ink jet or laser marking *Differences are caused by technology (clichee, laser, or ink) and production line.

Lead Spacing 10 mm FRONT TOP Capacitance Tolerance Approval Series, Marks Dielectric Code, Safety Class, Self Healing Manufacturer’s Capacitance, Logo Rated Voltage IEC Climatic Date Code Category Manufacturing NOTE: Hot imprinting with or without Plant Passive Flammability color or ink jet or laser marking Category: C for volume < 1750 mm3 Lead Spacing 15 mm, 22.5 mm, and 27.5 mm FRONT TOP Capacitance Tolerance Approval Series, Marks Dielectric Code, Safety Class, Self Healing Manufacturer’s Capacitance, Logo Rated Voltage IEC Climatic Date Code Category Manufacturing Metallized Polypropylene Film EMPIa Ssuspivper eFslasmiomn aCbaipliatyc itors Plant NOTE: Hot imprinting with or without Category: color or ink jet or laser marking R46 (Miniature), Class X2, 275 VBA fCo,r 1v1o0lu°mCe ≥ 1750 mm3 C for volume < 1750 mm3 Marking cont. Lead Spacing 22.5 and 27.5 mm (alternatives*) and 37.5 mm FRONT TOP Series Dielectric Safety Self Code Class Healing Capacitance, Approval Manufacturer’s Capacitance Marks Logo Tolerance, Rated Voltage IEC Climatic Category QA Number Passive Flammability Manufacturing Date Code Category Plant NOTE: Hot imprinting with or without color or ink jet or laser marking *Differences are caused by technology (clichee, laser, or ink) and production line. Manufacturing Date Code (IEC–60062) Y = Year, Z = Month Year Code Month Code 2000 M January 1 2001 N February 2 2002 P March 3 2003 R April 4 2004 S May 5 2005 T June 6 2006 U July 7 2007 V August 8 2008 W September 9 2009 X October O 2010 A November N 2011 B December D 2012 C 2013 D 2014 E 2015 F 2016 H 2017 J 2018 K 2019 L 2020 M © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3094_R46_X2_275_110C_MIN • 4/3/2020 14 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Metallized Polypropylene Film EMI Suppression Capacitors R46 (Miniature), Class X2, 275 VAC, 110°C Packaging Quantities Standard Lead Spacing Thickness Height Length Bulk Bulk Large Reel Ammo Reel (mm) (mm) (mm) (mm) Short Leads Long Leads ø 500 mm Taped ø 355 mm 4 9 13 2,000 1,800 750 1,500 1,000 10 5 11 13 1,300 1,500 600 1,250 800 6 12 13 1,000 1,200 500 1,000 680 5 11 18 2,000 1,000 600 1,250 800 6 12 18 1,750 900 500 1,000 680 6 17.5 18 1,000 700 500 1,000 680 7.5 13.5 18 1,000 700 350 800 500 15 7.5 18.5 18 900 500 – 800 500 8.5 14.5 18 1,000 500 300 700 440 9 12.5 18 1,000 520 270 650 410 10 16 18 750 500 300 600 380 11 19 18 450 350 – 500 340 6 15 26.5 805 500 – 700 464 7 16 26.5 700 500 – 550 380 8.5 17 26.5 468 300 – 450 280 22.5 10 18.5 26.5 396 300 – 350 235 11 20 26.5 360 250 – 350 217 13 22 26.5 300 200 – 300 – 9 17 32 816 408 – 450 – 11 20 32 560 336 – 350 – 13 22 32 480 288 – 300 – 27.5 14 28 32 352 176 – – – 18 33 32 256 128 – – – 22 37 32 168 112 – – – 22 37 32 168 112 – – – 11 22 41.5 420 252 – – – 13 24 41.5 360 216 – – – 37.5 16 28.5 41.5 216 108 – – – 19 32 41.5 192 96 – – – 20 40 41.5 126 84 – – – © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3094_R46_X2_275_110C_MIN • 4/3/2020 15 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Metallized Polypropylene Film EMI Suppression Capacitors R46 (Miniature), Class X2, 275 VAC, 110°C Lead Taping & Packaging (IEC 60286–2) Figure 1 Figure 2 Figure 3 Lead Spacing 10 mm Lead Spacing 15 mm Lead Spacing 22.5 – 27.5 mm P P h h P 2 W2 H0 ød A B W1 W0 W F P1 P0 D0 P1 P2 A-B t Taping Specifi cation Dimensions (mm) Lead Space Description Symbol 10 15 22.5 27.5 Tol. Fig. 1 Fig. 2 Fig. 3 Fig. 3 Lead wire diameter d 0.6 0.6–0.8 0.8 0.8 ±0.05 Taping lead space P 25.4 25.4 38.1 38.1 ±1 Feed hole lead space * P 12.7 12.7 12.7 12.7 ±0.2 ** 0 Centering of the lead wire P 7.7 5.2 7.8 5.3 ±0.7 1 Centering of the body P 12.7 12.7 19.05 19.05 ±1.3 2 Lead spacing (pitch) *** F 10 15 22.5 27.5 +0.6/−0.1 Component alignment ∆h 0 0 0 0 ±2 Height of component H **** 18.5 18.5 18.5 18.5 ±0.5 from tape center 0 Carrier tape width W 18 18 18 18 +1/−0.5 Hold down tape width W 9 10 10 10 Minimum 0 Hole position W 9 9 9 9 ±0.5 1 Hold down tape position W 3 3 3 3 Maximum 2 Feed hole diameter D 4 4 4 4 ±0.2 0 Total tape thickness t 0.7 0.7 0.7 0.7 ±0.2 * 15 mm also available ** Maximum of 1 mm on 20 lead spaces *** Pitches 15 mm and 10 mm taped to 7.5 mm (crimped leads) available upon request **** H = 16.5 mm is available upon request 0 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3094_R46_X2_275_110C_MIN • 4/3/2020 16 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Metallized Polypropylene Film EMI Suppression Capacitors R46 (Miniature), Class X2, 275 VAC, 110°C Lead Taping & Packaging (IEC 60286–2) cont. Ammo Specifi cations Dimensions (mm) H W T 360 340 59 H W T Reel Specifi cations Dimensions (mm) Reel Size D H W Standard 355 30 55 Maximum Large 500 25 D H W © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3094_R46_X2_275_110C_MIN • 4/3/2020 17 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Metallized Polypropylene Film EMI Suppression Capacitors R46 (Miniature), Class X2, 275 VAC, 110°C KEMET Electronics Corporation Sales Offi ces For a complete list of our global sales offi ces, please visit www.kemet.com/sales. Disclaimer All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3094_R46_X2_275_110C_MIN • 4/3/2020 18 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: K EMET: R46KF310000P1M R46KN415040P1M R46KN418040P1M R46KN422040P0M R46KF310050P0K R46KR422050P0M R46KR447050P1M R46KI347045P2M R46KI347050P0K R46KI347050P1M R46KI368000P1M R46KN368000P0M R46KN415000P0M R46KN415045P1M R46KF315045P0M R46KF315050P0M R46KF3150CKP0M R46KI333000P2M R46KI356045P0M R46KI368045P1M R46KI368050P1M R46KI3680JPP1M R46KI382045P0M R46KN3470JHP0M R46KI3330JEP0K R46KF310040P1M R46KI322000P0K R46KI322040P0K R46KR410000P0K R46KI3470JHP2M R46KF310000P0K R46KI3470HAP1M R46KF3100DQP1M R46KI368045P1MA R46KI3470DQP2M R46KI3680DQP1M R46KN3680JPP0M R46KF315000P0M R46KI3820JHP0M R46KN4220JHP0M R46KF3150JHP0M R46KI347000P3M R46KF2470DQP0K R46KN415000P1M R46KI3680JHP0K R46KN410000P0K R46KI3220JHP0M R46KR447000P1M R46KI3470JBP0K R46KF233045P0M R46KR415000P0M R46KI3470JHP0K R46KI333045P2M R46KI347000P2M R46KI3680JHP1M R46KF310045P1M R46KF247000P0M R46KF3100JEP1M R46KR433050P0K R46KF3150JEP0M R46KI347045P1M R46KR410000P0M R46KI3470JHP3K R46KI315050P0M R46KW4470ZBP1J R46KN4220JEP0M R46KN4150JHP1M R46KN368045P0M R46KN422000P0M R46KI322000P0M R46KN410000P1M R46KI368000P0K R46KN347000P1M R46KN368000P0K R46KI382040P0M R46KI3220CKP0M R46KF247040P0M R46KF268040P0M R46KN368040P0M R46KI347040P0M R46KI322040P0M R46KI333040P0M R46KF315040P0M R46KN415040P0M R46KI368040P1M R46KI347040P3M R46KF233040P0M R46KN410040P0M R46KI333040P2M R46KI368040P0M R46KI333040P1M R46KI347040P1M R46KI315040P0M R46KF310040P0M R46KI3470DQP0K R46KI382000P0M R46KI333000P0M R46KN4100CKP1M R46KR422000P0M R46KI3330DQP0M