WWW.PHIHONG.COM 24 Port IEEE802.3at/PoEPLUS Midspan POE806U for 10/100/1000 Base-T Networks Features  Compliant with the IEEE802.3at  Full Power of 576W—33.6W per Port, No Standard Power Management required  2 finger classification  Full Protection OTP, OCP, OVP  SNMP Management Option  SSL available with SNMPv3  Windows GUI  10/100/1000 Base-T Compatible  May power Cisco AP1250 using the  Limited Lifetime Warranty ACCY125X dongle  1U Rack Mountable (Kit Ships with Unit) Applications  VoIP Phones  Security Systems  Access Point  IP Cameras Safety Approvals  cUL/UL  CE Mechanical Characteristics  Length: 438mm (17.25in)  Height: 44.5 mm (1.75in)  Width: 228mm (8.98in)  Weight: 3.8Kg (8.5lbs) Output Specifications Number Output Load Output Model SNMP of Ports Voltage Min. Max. Power POE806U-24AT 24 56V 10mA 600mA 806W Max No POE806U-24AT-N 24 56V 10mA 600mA 806W Max Yes Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revision 1/8/2015

POE806U-24AT Characteristics WWW.PHIHONG.COM INPUT: Immunity EN50082-1 AC Input ESD: EN61000-4-2. Level 3 Voltage Range 90 to 264VAC RS: EN61000-4-3. Level 2 EFT: EN61000-4-4. Level 2 Input Frequency 47-63Hz Surge: EN61000-4-5. Level 3 Input Current: CS: EN61000-4-6. Level 2 12.0A (RMS) maximum for 90VAC Voltage Dips EN61000-4-11 10.0A (RMS) maximum for 230VAC Harmonic: EN61000-3-2 Class A Leakage Current: 3.5mA maximum @ 264VAC 60Hz Isolation AC Inrush Current: Primary to Secondary: 10 OHM 500VDC 30A (RMS) maximum for 115VAC Primary to Field Ground: 10 OHM 500VDC 60A (RMS) maximum for 230VAC FEATURE: OUTPUT: Cisco Total Output Power No extern parts required for Legacy devices: 33.6W per port VoIP Phones: Total Power 806W 7910, 7912, 7940, 7960 Access Points: Ripple and Regulation 1040, 1140, 1260, 3500 100mV maximum Over Voltage/Current, Short Circuit Protection Efficiency Outputs equipped with short circuit protection and 75% (typical) at maximum load, and 120VAC 60Hz overload protection as per 802.3at specifications The output can be shorted permanently without damage Hold-up Time 16mS min. 120VAC and maximum load Over Temperature Protection Automatic Shutdown without damage Transient O/P Voltage Protection 60V maximum at switch on and off at any AC line Phase Indicators Turn-On Delay Time Green LED: Power detected “CONNECT” Flashing GREEN: IEEE802.3af detected “CONNECT” 20 sec maximum at maximum load, and 120VAC 60Hz, at 33.6 60Hz Yellow LED: Fault detected ENVIRONMENTAL: USB Diagnostics Port and NIC Interface Temperature USB “B” port for diagnostics and manual port control Operation 0 to +40°C Windows GUI Non-operation -25 to +65°C NIC interface for remote management via secure IP access Humidity Operation 5 to 90% Input Connector Non-Operation 5 to 90% AC Input IEC320 C14 EMC Warranty EN55022 Class A, FCC Class A with UTP cabling Limited Lifetime EN55022 Class B, FCC Class B with FTP cabling Isolation Test Primary to Secondary: 4242VDC for 1 minute Primary to Ground: 2121VDC for 1 minute Secondary to Ground: 2121VDC for 1 minute

POE806U-24AT Dimension Diagram WWW.PHIHONG.COM