www.greenlee.com COMMUNICATIONS GREENLEE COMMUNICATIONS OFFERS A COMPLETE LINE OF INNOVATIVE AND INDUSTRY-LEADING TEST & MEASUREMENT SOLUTIONS FOR THE COMMUNICATION SERVICE PROVIDER INDUSTRY. Contents Multi-Network Test Analyzers 280 Wireless Test Solution 281 Cable Maintenance Test Set 282 Cable & Service Testing 286 Wire & Cable Identification 293 Structured Wiring Testers 305 Buried Facility Location And Marking 310 Fiber Optic Test Equipment 315 Fiber Optic Hand Tools 337 Fiber Optic Kits 339 Communications Kits 340 Hand Tools 352 HDMI Tools 382

COMMUNICATIONS NETWORK TESTING DataScout™ 10G CUSTOMIZABLE FOR ANY WORKGROUP FASTER TIME TO RESULTS • Ready to test in 25 seconds • Unique DS0 (TIMS) to 10G Ethernet solution • Test multiple services simultaneously SIMPLE TO USE, FAST TO LEARN • Touch screen tablet design • Portrait and landscape modes • Intuitive test configuration • Exportable results RUGGED & RELIABLE • Plug & stay - No modules to lose! • Replaces up to 8 handhelds* • Light yet sturdy aluminum housing DS10G-HW-B2 • Protective non-slip boot with kickstand DESIGNED FOR: SPECIFICATIONS • Service Providers Display & Input 7” WVGA LCD touch screen • Utilities 800x600 resolution • Mobility Weight (Varies by 0.91 kg (2.0 lbs) minimum • Enterprise configuration) 1.36 kg (3.0 lbs) maximum Test Kits Include: Dimensions 10 x 6.5 x 2.2 inches (WxHxD) • DataScout 10G analyzer 254 x 165 x 56 millimeters (WxHxD) • Universal charger with adapter blades ENVIRONMENTAL Operating Temperature Operating Temperature: 10°C to 55°C14°F to 131°F Operating Humidity: 0% to 93% RH non-condensing Storage Temperature: -20°C to 70°C -4°F to 158°F Battery Type: Li Ion battery pack SOFTWARE OPTIONS Run Time: 2-8 hours (varies by test mode) CAT. NO. DESCRIPTION External Power: Mains: 110-240VAC, 50-60Hz with adaptors ETHERNET TEST OPTIONS Enclosure: Shell: Rugged 1.5mm extruded aluminum DS10G-SW-201 Adds dual port 1Gb Ethernet testing Boot: Rubber with Wi-Fi® antenna storage slot DS10G-SW-110 Activates single 10G test interface Kickstand: Powder coated steel DS10G-SW-210 Adds dual port 10Gb Ethernet testing CONFIGURATION OPTIONS DS1 TEST OPTIONS DST-SW-DT1 Adds dual port T1 testing CAT. NO. DESCRIPTION DST-SW-N1 Adds T1 CSU/NIU emulation TABLET CONTROLLER DST-SW-V Adds DS0 voice analysis Base Controller Without Datacom DS10G-HW-B1 DST-SW-E Adds Euro/Asian ISDN-PRI support Interface DST-SW-X Adds DSO drop, insert & bypass DS10G-HW-B2 Base Controller With Datacom Interface DST-SW-DCOM Adds DATACOM DTE/DCE interface testing TEST INTERFACES DST-SW-E1 Adds E1/T1 On-The-Fly testing DS10-HW-WIFI Wi-Fi® DS3 TEST OPTIONS DS10-HW-ETH Dual 10/100/1000T/X & 10G Ethernet DST-SW-H3 Adds DS3 thru-mode testing DS10-HW-PDH1 Dual DS1 DST-SW-D1D Adds DS1 drop from DS3 signal DS10-HW-PDH2 DS3 & Dual DS1 DST-SW-NX Adds DS3 CSU/NIU emulation DS10-HW-P ISDN-PRI TIMS TEST OPTIONS DS10-HW-DDS Digital Data Services (DDS) DST-SW-PRO4 Adds 4-button frequency program Transmission Impairment Measurement DS10-HW-T DST-SW-4 Adds 4-WIRE 100/135Ω testing System (TIMS) Adds E&M TYPE I-V signaling, trunk, PBX and DST-SW-EM Wi-Fi® is a registered trademark of the Wi-Fi Alliance. Tie Line testing Adds measurement of dropouts, hits, *As compared to competitive network analyzer model DST-SW-DG amplitude, and phase jitter Subject to change without notice. DST-SW-TON Adds transmit of warble ID tone TRUSTED SINCE 278 www.greenlee.com 1862

= NEW PRODUCT = REPLACEMENT PART = ACCESSORY B = BARE TOOL DataScout™ 10G Product Specifications PRODUCTIVITY APPLICATIONS DS3 TESTING 4 WIRE DDS TESTING • Chrome web browser • Automatic self test on connection • CSU/DSU emulation • Google maps • STS-1 signal detection • 56K primary/secondary modes • Email, notes & contacts • Simultaneously test Dual T1 and DS3 • 64K clear channel mode • PDF viewer • Real-time received byte display • Onboard user manual & videos DS1 TESTING • Monitor received signal level • Remote control/upload via LAN • Dual T1/E1 testing • PRI-ISDN NT/TE emulation DATACOM TESTING 802.11 WIRELESS VALIDATION • T1 to Ethernet Bridging • Sync/Async & DTE/DCE modes • Tests for proper 802.11 b,g,n • DS0 Voice & Data Testing • V.35, RS232, RS449, RS530, X21 configuration • CSU/NIU Emulation Mode • Performs channel scan • VT100 emulation INTELLIGENT TIMING VERIFICATION • Graphical frequency/channel/power • Frame Relay option • Verifies network timing systems display • Combines oscilloscope, T1 test and • Remote control via Wi-Fi SIGNALING (TIMS/DS0) TESTING switch box • Comprehensive VF test suite • Composite clock/pulse analysis ETHERNET VALIDATION • TIMS 2/4 wire plus wideband • Eliminates need for expensive • Dual 10/100/1000T/X SFP • CO/PBX emulation storage oscilloscope Ethernet ports • Perfect replacement for Am5, • Test 10 T1/E1 circuits in seconds • 10 Gigabit Ethernet SFP+ CXR-704, HP4935A • BERT • Optical power measurement • PING & Traceroute • RFC-2544 with quick test validation • Loopback, monitor and thru modes • Easy to read graphical reports www.greenlee.com 279

COMMUNICATIONS NETWORK TESTING MULTI-NETWORK TEST ANALYZERS DataScout™ 1G FASTER TIME TO RESULTS • Ready to test in 15 seconds • Efficient SLA verification • Results can be exported for easy sharing REDUCE TIME TO REPAIR • All-in-one analyzer that is simple to use and fast to learn, enabling technicians to quickly determine and resolve network issues, regardless of the source NO MODULES REQUIRED • Eliminates the need for multiple test modules • Combines seven different physical layer test protocols into one complete handheld testing solution, saving time and money DESIGNED FOR THE TECHNICIAN • Ruggedized for demanding environments • Ergonomically designed to be the lightest and smallest on the market • Long battery run time provides extended field testing Test Kits Include: • DataScout 1G analyzer • Universal charger with adapter blades DS1G-BAS • Padded storage case • Stylus • USB adapter • Wi-Fi® Antenna SPECIFICATIONS ENVIRONMENTAL Interfaces Management: LAN 10/100 Base-T Operating Temperature 0°C to 50°C USB: Mini-USB with adapter Operating Humidity 5% to 90% non condensing Headset: Mini USB connector ear bud Storage -10°C to 70°C Wi-Fi 802.11 b/g/n Battery Type: Li Ion battery pack, 7.4V, 4800mAh Display & Input 3.5" TFT Touch Screen LCD Run Time: 7-10 hours typical (varies by test mode) Weight 1.65 lbs (0.75 kg) without battery External Power Mains: 110-240 VAC, 50-60 Hz 2.2 lbs (1 kg) with battery Enclosure Ruggedized ABS with rubber shell Dimensions 3.94 x 8.27 x 1.66 inches (WxHxD) 100 x 210 x 42 millimeters (WxHxD) CONFIGURATION OPTIONS SOFTWARE OPTIONS CAT. NO. DESCRIPTION CAT. NO. DESCRIPTION DS1G-BAS Ethernet Analyzer DS1G-SW-BAS Adds single stream Ethernet tests to DS1G-PDH1 or PDH2 DS1G-PDH1 DS1 analyzer (T1 or E1) Adds multiple stream Ethernet and DS1G-PDH2 DS1/DS3 analyzer (T3/T1 or E3/E1) DS1G-SW-ADV Y.1564 tests DS1G-SW-WIFI Adds Wi-Fi® analysis DS1G-SW-VOIP Adds VoIP analysis DS1G-SW-IPTV Adds IPTV analysis DS1G-SW-E1 Adds E1 to T1 analyzer DS1G-SW-T1 Adds T1 to E1 analyzer DS1G-SW-DCOM Adds DATACOM testing DS1G-SW-CODIR Adds Co-Directional testing DS1G-SW-E3 Adds E3 testing to T3 analyzer DS1G-SW-T3 Adds T3 testing to E3 analyzer DS1G-SW-C37 IEEE C37.94 Teleprotection analysis TRUSTED SINCE 280 www.greenlee.com 1862

= NEW PRODUCT = REPLACEMENT PART = ACCESSORY B = BARE TOOL WIRELESS TEST SOLUTION AirScout™ TM › The innovative Wi-Fi test solution › Enables whole home or small business Wi-Fi® readiness testing in minutes ASM300 › Determines real “Quality of Experience” in ASC300 multiple locations simultaneously • Industry leading Application benchmark testing CAT. NO. DESCRIPTION • All 802.11 types benchmarked ASK302 Two Client Solution in Carry Case • Validation testing over time increasing accuracy ASK306 Six Client Solution in Carry Case • Determines, throughout the home in one survey: • Signal strength ASM300 Individual Master Controller • Network congestion ASC300 Individual Client • Signal to noise ratio • Real throughput rates • Application performance in each location SPECIFICATIONS • Up to 30 Clients supported Height 1.81" (46.2 mm) • Results recorded locally and in a cloud database for Width 5.83" (147.6 mm) future reference ASM Controller Depth 5.79" (146.8 mm) Weight 332 g (11.7 oz) Height 1.46" (36.83 mm) Width 4.88" (124.46 mm) ASC Client Depth 4.88" (124.46 mm) Weight 247 g (8.71 oz) Height 14.6" (370 mm) Width 11.8" (300 mm) ASK306 Depth 6.69" (170 mm) Weight 11.7 lbs (187.2 oz) Operating Temperature 0 to +55 ºC / 0 to +131 ºF Storage Temperature -20 to +65 ºC / -4 to +149 ºF Environment Operating Humidity 20-80% RH non condensing Storage Humidity 10-90% RH non condensing FCC Compliance Canada Regulatory Requirements (ICES-003) CE Compliance Wi-Fi® is a registered trademark of the Wi-Fi Alliance. www.greenlee.com 281

COMMUNICATIONS COPPER & DSL TESTING CABLE MAINTENANCE TEST SET Sidekick® Plus Copper and DSL Test Set • Saves time – Easy-to-use mode selection dial and operation - minimizes training needs and saves time on the job • Versatile – Combines your copper qualification needs with DSL sync and service testing in one test set • Fully loaded – The Sidekick® Plus xDSL comes complete with all you need to perform tests on the copper networks that support DSL services • No modules needed – Advanced cable diagnosis and troubleshooting in a single test set Applications Helps technicians diagnose and troubleshoot problems with twisted pair cable Install, qualify, and maintain DSL services 1155-5005 Features Bonded Modem With xDSL: • Pair bonding • ADSL2+/VDSL2+ • Vectoring • Broadcom BCM63168 • Automated test scripts • USB export/import of test results/profiles • 35MHz Wideband Noise Spectrum Analysis • 4.4MHz Loss Measurement Test • 35MHz Impulse Noise Step • TDR with auto bridgetap detection (zero dead zone) ADSL/VDSL Modem Sync And Service Tests: • DSL Showtime • Bits per Tone Graph • Signal-to-Noise Ratio Graph • HLOG Graph • Error Counter • Upper Layer Testing: Ping, Trace-route, HTTP, FTP Standard Features: • Advanced Dual Trace Pulse TDR (Zero Dead Zone) • Resistive Fault Locator (Detects up to 20MΩ) • 1GΩ Leakage Test (Insulation Resistance) • Longitudinal Balance Test • Ground Resistance Test • Stress Test • AC/DC Voltage • Resistance • Open Meter • Loop Current • Circuit Loss • Tracing Tone Generator • Reference Tone CAT. NO. UPC NO. DESCRIPTION 1155-5001 01316 Sidekick Plus Kit LCC 1155-5003 01324 Sidekick Plus Kit SCC 1155-5005 01463 Kit, Sk Plus, Impulse Noise, Step TDR 1155-5009 01317 Sidekick Plus With Wideband 1155-5010 01318 Sidekick Plus With Wideband & Adsl/Vdsl Sync LCC 1155-5011 02275 Sidekick Plus With Wideband & Adsl/Vdsl Sync SCC 1155-5012 04197 Sidekick Plus Pair Bonded Modem - Fully Featured 1155-5013 03838 Sidekick Plus Pair Bonded Modem - Fully Featured SCC TRUSTED SINCE 282 www.greenlee.com 1862

= NEW PRODUCT = REPLACEMENT PART = ACCESSORY B = BARE TOOL Sidekick® Plus ADSL Far-End-Device For use with the Sidekick® Plus as a complete ADSL testing solution Applications: • Helps technicians diagnose and troubleshoot problems with twisted pairs at the far end of the cable 1155-5001 • Install, qualify, and maintain ADSL services Benefits: • Helps qualify pairs for ADSL service with ease • Reduces testing time and increases technician productivity Features: • K-Test – Far-End-Device straps the pair under test • TDR – Far-End-Device can alternately short and open the pair to verify the end-of-line • Noise – Far-End-Device provides a line termination • Loss – Far-End-Device provides single or multiple reference tones • Longitudinal Balance – Far-End-Device provides an IEEE 455-1985 Longitudinal Balanced Termination • Autotest – The Sidekick Plus manages the operation of the Far-End-Device during the test sequence • Short Pair – Verifies loop length • Short Pair to Ground – Determines pair resistive balance • Remote activation via Sidekick® Plus • Ability to connect and disconnect Central Office and Customer Premise equipment • Supports Second Pair Testing • Generates tones for pair ID and pair tracing *For use with the Sidekick® Plus Models • Capability to generate tones over a range of frequencies from 1155-5009 Sidekick® Plus with Wideband POTS to ADSL 1155-5010 Sidekick® Plus with Wideband & ADSL/VDSL Sync LCC Kit Includes: 1155-5011 Sidekick® Plus with Wideband & ADSL/VDSL Sync SCC • Sidekick® ADSL Far-End Device Unit 1155-5012 Sidekick® Plus Bonded Modem - Fully Featured • RJ45 to Telco clip leads 1155-5013 Sidekick® Plus Bonded Modem - Fully Featured • Canvas carry case CAT. NO. UPC NO. DESCRIPTION 1157-5001 03958 Sidekick® FED Kit www.greenlee.com 283

COMMUNICATIONS COPPER & DSL TESTING Sidekick® T&ND • Easy-to-read digital LCD display • Internal Dialer for making Transmission Test connections • Autotest – performs 22 individual tests at the touch of a button 1144-5000 • Determines the stressed noise susceptibility of dry and working pairs • Measures AC/DC Volts, Leakage, resistance, and loop current • Performs circuit loss, circuit noise (metallic noise), and power influence tests • Built-in open meter • Locates up to 4 load coils • Single set up for Tip-Ring, Tip-Ground, and Ring-Ground tests • Field replaceable test leads • On-screen display of “LOW BATTERY” when batteries are near failure. SPECIFICATIONS Weight 2 lbs. Opens 0 to 60 kft. Dimensions 10.75" X 4.25" X 2.5" Loop Current 0 to 100 mA AC Volts 300 Vrms max. Load Coil up to 4 DC Volts ± 300 Volts max. Circuit Loss +1 to -15 dB Resistance 1 Megohm max. Power Influence 40 to 100 dBrnC Leakage 100 Megohm max. Circuit Noise 0 to 75 dBrnC Stress 0 to 82 dBrnC Power Four AA Batteries CAT. NO. UPC NO. DESCRIPTION 1144-5000 60853 Sidekick T&ND Test Set 1134-1002S 60752 Case Sidekick® T&N • Five transmission and noise tests • Determines the stressed noise susceptibility of dry and working pairs • Measures resistance, AC/DC volts, and capacitive kick 1137-5002 • Provides tone for twisted pair or crossed conductor identification • Single setup for testing Tip-Ring, Tip-Ground, and Ring-Ground • Minimal drying effect in all ranges • Field replaceable leads • Softcase with adjustable strand hook • Low battery indicator light SPECIFICATIONS Dimensions 10.75" x 4.25" x 2.5" Stress Test 0 to 82 dBrnC Weight 2 lbs. Loop Current 0 to 100 mA Resistance Rx1: Reads 0 to 2000 Ω Circuit Noise 0 to 75 dBrnC Rx1K: Reads 0 to 2 MΩ Circuit Loss -15 to +1 dB Leakage Rx10K: Reads 0 to 20 MΩ Power Influence 50 to 100 dBrnC DC Voltage 0 to 300 volts DC Operating Temp. -4°F to +140°F AC Voltage 0 to 300 Vrms Power Four AA batteries CAT. NO. UPC NO. DESCRIPTION 1137-5002 60526 Sidekick T&N 1131-0202 60751 Test Leads 1134-1002S 60752 Case TRUSTED SINCE 284 www.greenlee.com 1862

= NEW PRODUCT = REPLACEMENT PART = ACCESSORY B = BARE TOOL Sidekick® 7B • Determines the stressed noise susceptibility of dry and working pairs • Measures resistance, AC/DC volts, and capacitive kick 1134-5029 • Provides tone for twisted pair or crossed conductor identification • Single setup for testing Tip-Ring, Tip-Ground, and Ring-Ground • Minimal drying effect in all ranges • Field replaceable leads • Softcase with adjustable strand hook • Low battery indicator light SPECIFICATIONS Dimensions 10.75" x 4.25" x 2.5" Weight 2 lbs. Resistance Rx1: Reads 0 to 2000 Ω; Rx1K: Reads 0 to 2 MΩ Leakage Rx10K: Reads 0 to 20 MΩ DC Voltage 0 to 100 Volts DC AC Voltage 0 to 200 Vrms Stress Test 0 to 82 dBrnC CAT. NO. UPC NO. DESCRIPTION 1134-5029 60525 Sidekick 7B 1134-1002S 60752 Case 1131-0202 60751 Test Leads Sidekick® V.O.C. • Identifies defective inside wire and jacks • Measures resistance, AC/DC volts, quasi square wave, and pair balance • Identifies shorts, opens, crosses and grounds • Replaces the need for other meters • Provides tone for twisted pair or crossed conductor identification • Single set-up for testing Tip-Ring, Tip-Ground, and Ring-Ground with ground connection • Field replaceable leads • Softcase with adjustable hook • Low battery indicator light SPECIFICATIONS Dimensions 10.75 x 4.25 x 2.5 inches Weight 2 lbs. Resistance Rx1: Reads 0 to 2000 Ω Rx1K: Reads 0 to 2 Megohms Leakage Rx10K: Reads 0 to 20 Megohms DC Voltage 0 to 100 Volts DC 1143-5000 AC Voltage 0 to 200 Vrms Stress Test 0 to 82 dBrnC Operating Temp. -4°F to +140°F Power Four AA batteries CAT. NO. UPC NO. DESCRIPTION 1143-5000 60527 Sidekick V.O.C. 1134-1002S 60752 Case www.greenlee.com 285

COMMUNICATIONS COPPER & DSL TESTING CABLE & SERVICE TESTING TM-700 Tele-Mate™ Telephone Test Set • Complete telephone set with ringer • Phone-to-phone intercom, compatible with other SmartIntercom™ devices • Modular or alligator clip connection • Amplified loudspeaker line monitor • Headset or handset operation • Tone and pulse dialing • Large 10-location speed dialing memory • Multi-memory redial • DTMF digit detection and measurement • Tone output mode • Caller ID with name display • Call waiting Caller ID • Missed call indication • DSL compatible, high impedance monitor and filters TM-700 • Glow-in-the-dark keypad • Line voltage and current display • High voltage detect and lockout • High current detect and lockout A PRODUCT VIDEO IS • Uses 2 AA/LR6 batteries (included) AVAILABLE, SCAN THIS QR • Quick release belt-clip CODE OR VISIT: www.youtube.com/GreenleeDEMO CAT NO. UPC NO. DESCRIPTION QTY. SPECIFICATIONS TM-700 00984 TM-700 Tele-Mate™ TELEPHONE TEST SET 1 Technical Specifications Length: 9.25" (235 mm) Width: 2.5" (64 mm) Height: 3.25" (83 mm) TM-500 Tele-Mate™ Telephone Test Set • Luminescent (glow-in-the-dark) keypad • Can be used safely on a DSL enabled line • High Impedance Monitor for monitoring line without disrupting existing traffic • Over voltage and over current protection • Tone and Pulse dialing for versatility on old and new phone lines • Polarity test with LED indicator • 32 digit last number redial and pause • 10 number speed dial • Adjustable volume control plus mute • Pause • Flash to generate a timed break recall • Line powered, no battery needed • Headset (included) for hands free operation TM-500 • RJ11 socket • Quick release belt-clip SPECIFICATIONS CAT NO. UPC NO. DESCRIPTION QTY. Technical Specifications TM-500 00486 Telephone Test Set W/ ABN "Bed-Of-Nails" Croc Clips 1 Length: 9.25" (235 mm) (POP) Width: 2.5" (64 mm) TM-500T 00494 Telephone Test Set W/ ABN "Bed-Of-Nails" Croc Clips 1 Height: 3.25" (83 mm) (Boxed) TM-500i 00643 Telephone Test Set W/ Small Croc Clips (Boxed) 1 TRUSTED SINCE 286 www.greenlee.com 1862

= NEW PRODUCT = REPLACEMENT PART = ACCESSORY B = BARE TOOL Nautilus Range Telephone Test Sets • Waterproof tested to an IEC IP67 rating, these test sets are so impervious to water they can actually withstand submersion, though they actually float • The PE961 features our DigAlert™ over-voltage alarm and lock-out function to reduce the risk of damaging or knocking out digital s ervice lines • Built-in DSL Filter • Ten-number speed dial memory (32 digits each) • Last number redial • Precise hook flash • Microphone mute • Audible and visual mode indicators • Polarity test in any mode • Unique quick-release belt clip • Premium cord set with bed-of-nails and piercing pin clips PE961 • Luminescent Keymat CAT. NO. UPC NO. DESCRIPTION PE930 60487 Telephone Test Set PE945 60489 Test Set with Two-Way Hands Free PE961 60511 Test Set with Two-Way Hands Free and DigAlert PE901 60492 Ground Start Cord Set PE902 60493 Cord Set FEATURE PE930 PE945 PE961 Monitor safe for data ✔ ✔ ✔ Adjustable Ringer ✔ ✔ ✔ Waterproof Design ✔ ✔ ✔ Loud Speaker Listening ✔ ✔ Two-Way Hands Free ✔ ✔ DigAlert™ Data Lock-out ✔ ADSL Compatible ✔ ✔ ✔ www.greenlee.com 287

COMMUNICATIONS COPPER & DSL TESTING ToneRanger • Direct buried fault location, it gives an exact location to the fault. • Locates open shield and open bond faults • Locates twisted-pair resistance faults in aerial, underground, and direct buried cable • Locates splits, opens and bridge taps • Uses low voltage and does not damage cable, circuit cards, C.O. or subscriber equipment • Sends Pair ID tone through wet pulp and saves service outage time on small count section throws • Locates open shields and shield to earth faults • Does not interfere with DSL, IPTV or digital services on adjacent lines • NEW easy user interface CAT. NO. UPC NO. DESCRIPTION 10101-50000 12734 TF1A Kit, ToneRanger Aerial 10101-51000 20206 TF1ABL Kit, ToneRanger Aerial and Buried 10101-51100 20202 TF1AP Kit, ToneRanger Aerial with Pair ID 10101-51200 12733 TF1AB Kit, ToneRanger Aerial with Buried Wand 10101-50000 10101-51300 12732 TF1AL Kit, ToneRanger Aerial with Layup Stick 10101-51400 52019 TF1ABLP Kit, ToneRanger with Aerial, Buried & Pair ID 52042471 – Transmitter Test Cable Throwmaster® Paragon • Used by construction cable splicers all around the world • Transfer telephone/broadband services during normal working hours. • Does not interrupt important customers • Simple to follow interface and process for successful transfer of circuits • LED's on the cords aid in telling the user in the cut, transfer and splice • Compatible with T-1, HDSL, HDSL-2, HDSL-4, ADSL and other services less than 10Mb/s • Each step is automatically tested and verifies the circuit is complete at the end of the transfer CAT. NO. UPC NO. DESCRIPTION 0529-0001 52901 Throwmaster® Paragon 519 Kit 0529-0001 TRUSTED SINCE 288 www.greenlee.com 1862

= NEW PRODUCT = REPLACEMENT PART = ACCESSORY B = BARE TOOL 1155 Fault Loop Simulator • Simulates 8 faults that can be used individually, or in a combination: – Cross battery – Resistive 5 kohm load to ground – Resistive 500 ohm short – Two balanced bridge taps – 60 ohm series resistance fault – 60 Hz Power Influence – High frequency noise • 1910 foot cable length • Battery operated • Rugedized case • Convenient Test Lead connections. • Three access locations in the span for custOm faults • Train users on real twisted-pair faults • Test multiple test set functions such as RFL, TDR, Power Influence, Stress, Leakage, Resistance, impulse noise and others 1155-7001 • Verify results from the field in a controlled environment • Demonstrates how noise increases with pair imbalances • Show differences between shorts, bridge taps, series faults and opens with a TDR CAT. NO. UPC NO. DESCRIPTION 1155-7001 57691 Test Set 4-6-8 Modular Adapters • Nylon-reinforced ABS plastic body. • Easy-to-read wire layout. • Removable/replaceable patch cord. • Inline adapters. • Snagless plugs. • Belt clip. • Notched copper contacts keep alligator clips attached during testing. CAT. NO. DESCRIPTION PA1902 PA1902 RJ45 Modular Adapter (8-way) PA1903 RJ11 Modular Adapter (6-way) www.greenlee.com 289

COMMUNICATIONS COPPER & DSL TESTING TurTEL® Modular Adapters/Polarity Tester • Use with tone generators, test sets and other test devices to troubleshoot and isolate problems with telephone circuits • Two jacks allow in-line testing without service interruption • The TurTEL 8 has two eight-position, eight-wire jacks • Simple, push button operation to check polarity and power • Reduced chance of shorting adjacent alligator clips due to unique shape • Test contacts are perforated to provide sure grip for alligator clips or use of probes • Patch cord included • Heavy-duty stainless steel belt clip 46050 CAT. NO. UPC NO. DESCRIPTION 46050 46050 TurTEL 8 Modular Adapter TelScout® TS90 • Two Pair Test Capability • One-Step Setup • Automatic Instrument Control Mode • 45,000' (15 km) Fault Location Capability • Splash and Drip Proof • Single-Button Zoom Function • Pair Comparison Mode • Splits/Crosstalk Mode • Intermittent Fault Location • Measures Distance to Fault in Feet, Meters, or Time • Configurable for Any Cable Type and Vp (0.300 to 1.000) • Accurate (±3 ft. at 10,000 ft.) • On-line Tutorials TS90INTL • Large Backlit Display SPECIFICATIONS SPECIFICATIONS Environmental Temperature – Physical Dimensions in. mm Operating: 32° F to 77°F (0° C to +45° C). Height 5.6 141 Non-operating: 12° F to 92°F (-20° C to +60° Width 8.3 211 C).Humidity – 95% RH, non-condensing. Depth 1.8 43 EMI Emissions – EN55011 class A. EN60555-2. Weight .lb kg. Net 2.2 1 Power Battery Operation – Battery Type: Six AA Alkaline. Operating Time: >4.5 hrs. with backlight off. Battery Saver: CAT. NO. UPC NO. DESCRIPTION Selectable for 5 to 30 minutes or disabled. TS90INTL 26345 Telescout, International TS90 012154500 60740 Leads THM5BAT 60756 Rechargeable Battery Pack TRUSTED SINCE 290 www.greenlee.com 1862

= NEW PRODUCT = REPLACEMENT PART = ACCESSORY B = BARE TOOL CableScout™ TV220 - TDR Cable Tester for CATV • Easier-to-use GUI interface requires little or no training • PC application is compatible with all the current operating systems • Improved clarity and trace functionality makes it even easier to identify faults on-screen and determine noise versus the fault • Even higher SNR and Resolution makes it easier to identify events that were previously difficult or impossible to find • Zero dead zone at the launch allows the user to see faults immediately • Improved trace update rate allows you to see changes to the fault faster (5 times/sec. versus 2 times/sec.) • Higher capacity to hold traces • USB interface for trace download • Lighter weight and longer charge life with the new lithium-ion battery • TestWizard™ one-button testing TV220 • Automatic Return Loss Measurements • Automatic Multiple Event Marking • High-Resolution, Short Pulse Width (1 ns) • Rugged enough to withstand a 2 meter drop CAT NO. UPC NO. DESCRIPTION TV220 00676 TDR for CATV Broadband TV220-0350 17404 Soft Carrying Case 1155-1010 25877 Power Supply, AC-DC 174173401 21640 Vehicle DC Adapter/Charger 174326900 21641 Replacement Power Cord SPECIFICATIONS SPECIFICATIONS Output Test Signal Output – 1/2 Sine Power Amplitude – 4V into 75 Ω AC Operation – Voltage Ranges: 110 V, 220 V, or 240 V with appropriate Pulse Width – 1 ns, 5 ns, 25 ns AC to DC adapter Output Impedance – 75 Ω Line Frequency: 50 Hz to 60 Hz Acquisition System Bandwidth – 400 MHz DC Operation – Return Loss Automatic at cursor location Voltage Range: 9 to 16 VDC @ 1A (charging and operating) Resolution: ±1 dB Battery Operation – Type: Internal Li-Ion rechargeable battery Input Protection – ±400 VDC + peak AC up to 440 Hz, Operating Time: Typically 12 hours continuous operation 30-second duration (backlight off) Maximum Distance Range – 12,000 ft. (3,658 m), Battery Savers (user selectable) – depending on cable type and condition Shutoff: 5 to 30 minutes or disabled Gain – 0 to 72 dB Backlight: Shutoff 5 to 30 minutes, disabled, or always on Waveform Storage – Minimum of 20 waveforms with notes General Characteristics Distance Accuracy Feet: Temperature – Operating: –10° C to +40° C (+11° F to +104° F) Non- 0 to 2,000 ft.: ±2 ft. ± uncertainty in Vp 2,001 to 6,000 operating: –20° C to +60° C (–4° F to +140° F) Humidity ft.: ±3 ft. ± uncertainty in Vp 6,001 to 12,000 ft.: ±4 ft. ± – 10% to 95% (non-condensing) uncertainty in Vp Meters: Field Usage – Shock, water, and dust resistant 0 to 610 m: ±0.6 m ± uncertainty in Vp Durability – Survives drop of 2 meters (6 ft.) to concrete in 611 to 1830 m: ±0.9 m ± uncertainty in Vp 1831 to 3658 standard soft case. Drip proof, dust resistant m: ±1.2 m ± uncertainty in Vp EMI Emissions – EN55011, Class A Display Resolution: 640 x 440 (281,600 pixels) EN60555-2 Size: 7.2 inch Safety – CE (Low Voltage Directive) Type: High contrast LCD Backlight: Operator switchable PHYSICAL Waveform Display Resolution – 0.33% of selected range, Dimensions Centimeters Inches 4.5 cm (0.15 ft.) minimum Height 24 9.5 Display Ranges – Twelve display ranges from 6 ft. (1.8 m) to 12,000 ft. (3,658 m), plus single-button Width 30 11.5 zoom window Depth 9 3.5 Output Port – Serial 9-pin D type connector Weight Kilograms Pounds Distance Measurements – Meters, feet, nanoseconds Net 3 6.4 www.greenlee.com 291

COMMUNICATIONS COPPER & DSL TESTING CableScout™ TV90 • High performance easy to use Time Domain Reflectometer for Coaxial testing applications • Employs optimized pulsing and sampling, coupled with advanced filtering and signal-processing techniques to ensure clean waveform and easy identification • Context-sensitive help screens for all functions • Small, portable and lightweight 2.2 lbs. (1kg) • Includes rechargeable battery pack • Includes twisted pair adapter and test probe CAT. NO. UPC NO. DESCRIPTION TV90US 12600 TV90 CableScout™ TDR THM5BAT 60756 Rechargeable Battery Pack THM5AC 21729 AC Adapter 110V TV90 TS90-0350 21739 Soft Carrying Case SPECIFICATIONS • Easy to operate (help screens available for all functions) Environmental Temperature: • Fast fault finding with automatic gain and vertical waveform positioning Operating: 32° F to 77°F (0° C to +45° C). • One-button Expand/Full View Function and zoom control. Non-Operating: 12° F to 92°F (-20° C to +60° C). • Precision accuracy 0-200 ft +- 2 ft. 1% beyond. Durability: Survives Drop test of 6 foot (2m) to concrete in soft case • Range up to 4000 ft. Power: 110 V, 220 V, 240 V with appropriate power adapter • High-resolution with optimizing pulse and sampling and advanced filtering Battery type: 6 AA Alkaline and NiCad rechargeable pack. 4.5 hours • Input Protection: 200 VDC + Peak AC. continuous operation with adjustable battery saver modes • Rugged - designed for harsh environments Standards UL, FCC EMI, CAN/CSA, EN, and CE • Large 7.2-in. high-resolution backlit display. • International power supply options TRUSTED SINCE 292 www.greenlee.com 1862

= NEW PRODUCT = REPLACEMENT PART = ACCESSORY B = BARE TOOL WIRE & CABLE IDENTIFICATION Classic 77 Series Tone Generators FEATURES / SPECIFICATIONS 77HP-G 77HP-G/6A 77M-G Selectable Warble Tone ✔ ✔ ✔ Continuity Testing LED & Beeper LED & Beeper LED Polarity Testing ✔ ✔ ✔ Talk Battery Supply ✔ ✔ ✔ Two-line Modular Test Lead (RJ-11) ✔ ✔ Three-color LED (identifies AC ring voltage) ✔ ✔ ✔ Weather-Resistant Design ✔ ✔ ✔ Bent Nose Clips with Bed-of-Nails Penetrator ✔ RJ11 & RJ45 socket ✔ ✔ Lanyard ✔ ✔ Battery Operated (9V not included) ✔ ✔ ✔ 77HP-G 77HP-G/6A 77M-G Classic 77 Series Tone Generators Permits technicians to identify the conductor within a bundle, at a cross- connect point or at the remote end. Can be used on twisted pair wiring (telecom, datacom, etc.), single conductors, coaxial cables, de-energized AC wiring and most other wiring. CAT. NO. UPC NO. DESCRIPTION 77HP-G 49991 77H-GP Tone Generator 77HP-G/6A 49992 77HP-G/6A Tone Generator (ABN clips) 77M-G 49993 77M-G Tone Generator (basic) Note: Not for use on energized AC wiring CAT. NO. UPC NO. DESCRIPTION 77CS 08686 Leather Belt Holster for Classic 77 Series Tone Generators 77HP-G 77CS Replacement Piercing Clips • These traditional telco-style clips can be used with almost any style cordsets. • Clips feature bent nose design for use on 66 style punchdown blocks and bed-of-nails penetrator for use on insulated wires. • Package of two clips with red and black boots. CAT. NO. UPC NO. DESCRIPTION RPC 08710 Piercing Clips RPC www.greenlee.com 293

COMMUNICATIONS COPPER & DSL TESTING Station Master Pro • Troubleshoot irrigation systems • Activate and cycle solenoids • Test solenoids for continuity • Send tone to identify wires • Measure clock voltage • Low battery indication • Easy-to-understand LEDs • Test leads with Bed-of-Nails and piercing Pin Clips • 1-year limited warranty SPECIFICATIONS Minimum Voltage for Clock LED 15 VAC (LED intensity increases as voltage increases) Minimum Battery while Testing 10.5 VDC Maximum Input Voltage between Test Leads 28 VAC 24B Solenoid Circuit Recharge Time 2.5 seconds Maximum Distance Range to Activate one Solenoid 12 AWG Loop 3000-13000 feet 14 AWG Loop 2000-8500 feet 18 AWG Loop 500-3000 feet Power Source 9V alkaline batteries Battery Life 3 hours continuous Operating/Storage Temp. 32°F - 122°F (0° - 50°C) CAT. NO. UPC NO. DESCRIPTION 24B 86786 Station Master Pro Station Master Pro Kit • Troubleshoot irrigation systems • Chatter mode for audible locating of valves • Activate any 24V AC valve solenoid • Test solenoids for continuity • Send tone to identify wires • Check clock AC voltage • Low battery indication • Easy-to-understand LEDs • Test leads with 'bed-of-nails' and piercing pin plips • Tracing valve wiring • Locates underground solenoids SPECIFICATIONS Minimum voltage for clock LED 15 V AC Minimum battery while testing 10.5 V DC Maximum input voltage between test leads: 28 V AC Solenoid activate output voltage: 27 to 18 V AC Battery: 2 - 9V Alkaline batteries 24BK Operating/storage temperature: 32°F to 122°F (0°C to 50°C) Relative humidity (max): 80% CAT. NO. UPC NO. DESCRIPTION 24BK 86787 Station Master Pro Kit TRUSTED SINCE 294 www.greenlee.com 1862

= NEW PRODUCT = REPLACEMENT PART = ACCESSORY B = BARE TOOL Professional GX Series Tone Generators • Microprocessor controlled circuitry for increased reliability • Two-line polarity indication for fast outlet identification • Automatic shutoff to prevent battery drain • Snag-proof boot prevents broken plug tabs • Convenient wrist/hanging lanyard • Three distinct, selectable tone signal outputs for multiple line identification • Two selectable tone power outputs for use on open and shorted pairs • Independent continuity test function 77GX • Independent talk battery supply with higher output voltage • Fixed alligator clips and removable modular plug for multiple connection options • 77GX2 includes premium telco-style bent nose clips with piercing pin and bed-of-nails connectors CAT. NO. UPC NO. DESCRIPTION 77GX 60556 77GX Tone Generator 77GX2 60560 77GX2 Tone Generator Note: Not for use on energized AC wiring AdapToner Modular Breakout Tone Generator • The AT8 Tone Generator makes it simple to test continuity, polarity, send tone and even supply talk battery to any configuration of pairs in 8-position modular jacks and plugs • Combines the features of our tone generators and a modular breakout adapter • In-line testing is made simple with both a modular plug and jack on each unit • 8-position “snag-proof” modular plug • 8-position jack with protective cover • Quick reference guide with common wiring configurations • Selectable solid/warble tone signal • Tone, continuity and talk battery supply using alligator clips • Weather-resistant design • Battery operated (9V not included) AT8 CAT. NO. UPC NO. DESCRIPTION AT8 08693 AdapToner Modular Breakout Tone Generator Note: Not for use on energized AC wiring www.greenlee.com 295

COMMUNICATIONS COPPER & DSL TESTING LAN Toner with HUB Blink and Detect • The LAN Toner is designed for the network installation and maintenance professional and can be used on any wiring system including datacom, telecom, security/alarm, audio and CATV • Blinks HUB, Switch Port, and PC activity lights for fast identification • Detect LAN hubs & switches • Provides tone signaling, continuity testing and telephone line polarity indication combined with a modular breakout adapter • Selectable tone outputs for identifying multiple cable runs • Includes multiple connection options CAT. NO. UPC NO. DESCRIPTION AT8L 60583 LAN Toner Note: Not for use on energized AC wiring AT8L Tone Test Set • Our most comprehensive tone test set • Traditional alternating tone signal for wire identification • Audible line condition testing (level) indicates dead, working and off-hook lines • Line 1 and 2 polarity testing using 4-conductor modular plug • Improved talk battery supply for communication over inactive pairs • Tone and test functions using either modular plug or 24" alligator clip leads • Audible resistance level measurement • Audible capacitance level measurement • Battery operated (9V not included) CAT. NO. UPC NO. DESCRIPTION 600LS 08680 Tone Test Set Note: Not for use on energized AC wiring 600LS TRUSTED SINCE 296 www.greenlee.com 1862

= NEW PRODUCT = REPLACEMENT PART = ACCESSORY B = BARE TOOL Alarm Loop Verifier/Tone Generator • Designed specifically for the security and alarm industry, the PE620 can be connected to a normally open or normally closed loop pair and provides a distinct audible tone when the alarm condition occurs • Latching feature provides a simple method for identifying intermittent failures (“swingers”) and confirming operation of switches at remote locations • In the latching mode, the unit will catch the alarm condition and continue sounding until the tester is reset • As a tone generator, the unit provides a traditional variable tone that can be applied using the 24" red and black test leads or a convenient 6-position modular plug • Convenient magnetic back plate allows the PE620 to be mounted directly to the control panel cabinet or door • Battery operated (9V not included) CAT. NO. UPC NO. DESCRIPTION PE620 08665 Alarm Loop Verifier/Tone Generator Note: Not for use on energized AC wiring PE620 Data Mate™ Precision Tracing Tone Generator • Trace wire or cable without interfering with digital two-way cable or ADSL services • The model 7780 Data Mate™ Precision Tone Generator is intended to provide tone for tracing and troubleshooting communication circuits without disrupting digital traffic on the line or adjacent lines • The high purity of the tracing tones combined with internal isolating filters allows safe tracing on circuits that carry digital services above the baseband (two-way cable and ADSL) • The high-power differential output of the 7780 makes tones easy to find, even over long distances. Also useful for continuity testing and polarity testing, the 7780 provides the standard warble tone and talk battery supply • High Power Tone Output. • Two-way Broadband Compatible. • Line Voltage and Polarity • Modular and Telco Pro Alligator Indication. Leads. • High Purity Tone Signal. • ADSL Service Compatible. • Low Crosstalk. • Long Range. • Low Battery Indicator. • Popular, Standard Warble Tone • Filter-isolated Circuitry. Frequencies Continuity Testing • Compatible with existing tone. SPECIFICATIONS PE7780 Electrical Output Power +9dBm Output Signal Frequency 577/982 Hz alternating Output Impedence 3,500 ohms minimum, 25kHz to 1.1 MHz Mechanical Length 5.5" (140 mm) Depth 1.0" (25 mm) Width 2.25" (57 mm) Weight 0.38 lbs. (0.17 kg) CAT. NO. UPC NO. DESCRIPTION PE7780 60777 Data Mate™ Tone Generator Note: Not for use on energized AC wiring www.greenlee.com 297

COMMUNICATIONS COPPER & DSL TESTING Tone Probes Selection Guide MODEL NO. 200B-G 200EP-G 200GX 200FP 200XP 500XP Powerful 2" Rear-fire Speaker ✔ ✔ ✔ ✔ ✔ ✔ One-button Operation ✔ ✔ ✔ ✔ ✔ Two-Button Adjustable Volume Control ✔ ✔ ✔ ✔ ✔ ✔ LED for Visual Signal Strength Indication ✔ ✔ ✔ ✔ ✔ Recessed Tabs for Telephone Test or Headset Connection ✔ ✔ ✔ Headset Jack (audio shock protected) ✔ ✔ LED Flashlight ✔ Noise Filtration ✔ ✔ ✔ Replaceable Tip ✔ ✔ ✔ ✔ ✔ ✔ Five-Minute Auto Shutoff ✔ ✔ ✔ Low-battery Indicator ✔ ✔ ✔ Battery Operated (9V not included) ✔ ✔ ✔ Water Resistant ✔ "Mains Power" Warning (acAlert® option) ✔ Patented ✔ ✔ ✔ 200B-G 200EP-G 200GX 200FP 200XP 500XP Tough & Water Resistant Multi-Filter Tone Probe • Water resistant (floats) and tough, combined with all the very best digital signal processing filtering 500XP will help identify signals buried in the worst of noise • Simple two-button operation with dual signal strength indicating LEDs can work with any tone generator • Headset allows discrete use in quiet environments and can help in acoustiacally noisy areas 500XP • Option to enable acAlert®, which helps warn users if brought near hazardous ac power voltages which may be inaudible if using the advanced filtering CAT. NO. UPC NO. DESCRIPTION 500XP 01125 500XP Pair Tracing Probe (POS) 500XPB 01085 500XP Pair Tracing Probe (Boxed) HS001 01126 Replacement Headset Tone Probe Amplifiers 500XPH 02642 500XP Pair Tracing Probe Holster • Used in conjunction with any tone generator, Tone Probe Amplifiers permit wire and cable identification without having to make direct metallic contact with the conductor • All models feature a powerful speaker for noisy environments, recessed on/off button control and high gain for accurate wire identification in congested cable bundles and equipment rooms • The 200B-G also includes adjustable volume control for precise identification • The 200GX also includes an LED for visual signal strength indication and recessed telephone test set connectors • The 200EP-G also includes a headset jack (audio shock protected) and an LED Flashlight for working safely behind furniture, inside racks or in dim 200C lighting conditions CAT. NO. UPC NO. DESCRIPTION 200EP-G 200B-G 49986 Tone Probe, Basic 200GX 60557 Tone Probe, Standard 200EP-G 49987 Tone Probe, Standard, with Headset Jack & Flashlight 200C 08670 Leather Belt Holster for 200 Series Tone Probe Amplifiers TRUSTED SINCE 298 www.greenlee.com 1862

= NEW PRODUCT = REPLACEMENT PART = ACCESSORY B = BARE TOOL Filter Tone Probe • By selectively filtering out 60Hz (or 50Hz) and its harmonics, the 200FP can be used with any tone generator for faster, more accurate, cable and wire identification • Slim, comfortable design for use in limited-space areas • Recessed on/off push-button control to conserve battery life • Adjustable sensitivity/volume control to increase accuracy • Blended carbon/plastic tip to reduce the risk of shorting terminals • Patented CAT. NO. UPC NO. DESCRIPTION 200FP 08672 Filter Tone Probe (60Hz mains) 200FP/50 60467 Filter Tone Probe (50Hz mains) 200FP Multi-Filter Tone Probe • Single button selects between default mode and two kinds of powerful noise filters • Filtering means faster, more accurate pair tracing • Digital signal processor for accuracy and sensitivity • Durable, light weight • Audible and visible signal detection • Continuous, wide-range volume control • Butt set terminals • Field replaceable tip, spare tip included • Uses a single 9V battery • One probe for many applications • Works with any tone generator • The narrowband filter mode is especially well suited for 577Hz Telco tone 200XP sources and a version is available for 1kHz systems (983Hz) CAT. NO. UPC NO. DESCRIPTION 200XP 60887 Multi-Filter Tone Probe (60Hz mains, 577Hz narrowband) 200XP/50 60888 Multi-Filter Tone Probe (50Hz mains, 983Hz narrowband) Replacement Plastic Tips for 200 Series Probes • Plastic tips perform much the same as traditional metal tips while reducing the risk of shorting terminals • Specially formulated with a carbon powder and carbon fiber blended plastic • Tips fit 200B, 200EP, 200GX, 200FP and 200XP probes • RPT-1 comes with two pencil-style tips and two spade-style tips CAT. NO. UPC NO. DESCRIPTION RPT-2 RPT-1 08711 Plastic Tips for 200B, 200EP, 200FP and 200XP RPT-2 60561 Plastic Tips for 200GX RPT-1 Replacement Metal Tips for 200B and 200EP Probes • Metal tips provide maximum performance when probing insulated wires or making direct metallic contact • Made of nickel-plated brass RMT-1 • Tips fit 200B and 200EP probes • Package contains two pencil-style tips CAT. NO. UPC NO. DESCRIPTION RMT-1 08709 Metal Tips for 200B and 200EP Probes www.greenlee.com 299

COMMUNICATIONS COPPER & DSL TESTING Precision Tone Generator • Used in the telecommunications industry for pair identification and fault locating • Supplies a precise 577.5Hz crystal controlled signal frequency. • Variable output allows technicians to adjust signal strength to suit field conditions and improve accuracy • Designed to work with any common amplifier and exploring coil for aerial fault locating • For communications over inactive pairs, the unit supplies talk battery to power two telephone test sets (buttsets) • Each of the three test leads is equipped with traditional bent nose p iercing clips with “bed-of-nails” insulation piercing pins • The tone generator and test leads fit neatly in a durable, protective woven polyester carrying case with shoulder strap 177 • Battery-operated (1 – 6V lantern included) CAT. NO. UPC NO. DESCRIPTION 177 08657 Precision Tone Generator SPECIFICATIONS Power Requirements One 6V lantern battery Battery Life 40 hours nominal Transmitter Frequency 577.5Hz pulsed at 1Hz, crystal controlled Output Voltage 0.1 to 80Vp-p Output Signal Level 0 to +30dBm Construction High impact ABS plastic in woven polyester case Dimensions 7.25" x 5.5" x 4.5" in case Weight 3 lbs. with battery T-Bug® Digital Signal Identifier • Used to detect digital signals on twisted pair cables, identify and isolate d igital pairs for special handling and help technicians avoid accidentally putting pairs out of service • Operation is non-invasive and does not involve metallic contact so there’s no risk of service interruption • Simple to use – just place the probe between the pairs in question • Differential amplifier saves time by allowing the technician to determine whether the signal is truly present or is an induced signal from adjacent pair • False readings due to noise are virtually eliminated • Continuous self test ensures that the unit is functioning properly 0134-0500 • Emits both visible and audible indication when digital signals are present • Patented CAT. NO. UPC NO. DESCRIPTION 0134-0500 60764 T-Bug® Digital Signal Identifier TRUSTED SINCE 300 www.greenlee.com 1862

= NEW PRODUCT = REPLACEMENT PART = ACCESSORY B = BARE TOOL Classic Tone and Probe Kits • 701K-G Kits include the 77HP-G High Power Tone Generator and the 200EP Tone Probe Amplifier in a rugged, woven nylon carrying case (700C) • 601K-G Kit is a more basic version of the 701K-G kit, and includes the 77M-G Tone Generator and the 200B-G Tone Probe amplifier in a zippered nylon pouch CAT. NO. UPC NO. DESCRIPTION 601K-G 49989 Classic Tone and Probe Kit, Basic 701K-G 49990 Classic Tone and Probe Kit, Standard 701K-G/6A 35775 Classic Tone and Probe Kit, Standard with ABN clips 701K-G Premium Tone and Probe Kit • Designed for more accurate wire identification, the 801K virtually eliminates power-related noise from the tone and probe operation • Kit includes the 77HP/6A High Power Tone Generator and 200 FP Filter Probe in a convenient Cordura® case (700C). 801K CAT. NO. UPC NO. DESCRIPTION 801K 08690 Premium Tone and Probe Kit 801K/50 60466 Premium Tone and Probe Kit (50Hz) Xpert Tone and Probe Kit • The Xpert Tone and Pobe Kit includes the 77GX (or 77GX2) Tone Generator and 200XP Multi-Filter Tone Probe Amplifier in a rugged, woven nylon carrying case • Especially suited for tracing in noisy environments CAT. NO. UPC NO. DESCRIPTION 811K 36001 Tone and Probe Kit, Xpert 811K/6A-BOX 26375 Tone and Probe Kit, Xpert with ABN clips 811K AdapToner Kit • Designed for fast, accurate wire identification by combining the features of our tone generators and modular breakout adapter • Kit includes the AT8 Modular Breakout Tone Generator and 200EP Inductive Amplifier in a convenient carrying case (700C) CAT. NO. UPC NO. DESCRIPTION AT8K 08694 AdapToner Kit AT8K www.greenlee.com 301

COMMUNICATIONS COPPER & DSL TESTING 802K Digital LAN Tracing Kit • The 802K Digital LAN Tracing Kit is a powerful, unique troubleshooting and tracing solution for LANs and other types of VDV wiring. The industry standard 200FP filter probe (60Hz) is designed to eliminate hum from fluorescent lights and AC power wiring that can obscure tracing tones • The AT8L LAN Toner not only generates multiple tracing tones and provides basic wiring tests, but indicates the presence of 10/100Base-T network service CAT. NO. UPC NO. DESCRIPTION 802K 36000 Digital LAN Tracing Kit 802K LAN Toner Kit • Designed for the network installation and maintenance professional, the LAN Toner sends tone and blinks HUB, Switch Port, and PC activity lights for fast identification. This kit can be used on any wiring system including Datacom, Telecom, security/alarm, audio and CATV • Kit includes the AT8L LAN Toner and the 200GX Inductive Amplifier in a rugged, woven nylon carrying case (700C) CAT. NO. UPC NO. DESCRIPTION AT8LK 60584 LAN Toner Kit AT8LK CATV Cable Tone Test Kit • Designed specifically for the CATV industry, this kit allows you to tone through splitters, directional couplers and traps • Simple to use, the 402K provides accurate results and will eliminate long delays trying to figure out non-tagged or mis-tagged cable drops • Kit includes one transmitter, one receiver, one male F-to-F connector adapter cable, one male F-to-alligator clip adapter cable and a carrying case (700C) • Transmitter and receiver are equipped with female F-connectors • Three methods of signal reception: electrostatic pickup for non-terminated cables, electromagnetic pickup for terminated or shorted cables and direct connection when identifying in the presence of passive devices • In continuity mode, provides both audible tone and LED display • Identifies the presence of AC or DC voltage on the cable under test • Four selectable tone outputs for multiple line identification CAT. NO. UPC NO. DESCRIPTION 402K 402K 08677 CATV Cable Tone Test Set 402T 60376 Transmitter 402R 60377 Receiver CS9 60374 Male to male F-connector adapter cable CS19 60378 F-connector to alligator clip TRUSTED SINCE 302 www.greenlee.com 1862

= NEW PRODUCT = REPLACEMENT PART = ACCESSORY B = BARE TOOL Security and Alarm Kit • Designed specifically for the security and alarm industry, the 620K provides a simple method for identifying intermittent failures (swingers) and confirming operation of switches at remote locations • To better satisfy industry requirements, we’ve combined the Model PE620 Tone Generator with the popular Model 200EP Inductive Amplifier in a durable woven nylon pouch (700C) CAT. NO. UPC NO. DESCRIPTION 620K 08682 Security and Alarm Kit 620K Tone and Probe Plus Cable-Check™ RJ45 LAN Tester • True cable mapping function identifies: – Good connection, opens, shorts and crosses – Connector and cable pin-out – Clear LED display for each pin and shield – Shielded RJ45 modular plug socket • Automatic display of mapping with dual speeds: slow or fast • Tests RJ11 and RJ45 cables with runs up to 600’ • Check polarity of telephone line • View telephone line status: dial tone, ringing or busy line • Provides talk power for telephone lines and butt set use • Selectable dual/single tone application for balanced and unbalanced circuits • Four tone generator patterns • Test continuity of wires, cables and loads • Tone generator features auto-off function • Jack for headset • Audible speaker with adjustable volume control CAT. NO. DESCRIPTION PA1573 PA1573 Tone & Probe Plus Cable-Check™ Kit www.greenlee.com 303

COMMUNICATIONS COPPER & DSL TESTING Cabling Pouch • Designed to hold a complete set of wiring tools including: any (one) 77 Series Tone Generator, any (one) 200 Series Inductive Amplifier, a punchdown tool, a cabling knife and scissors • Convenient loop to hold most telephone test sets • Removable “parts pouch” allows you to keep small components in reach • Made of a durable woven nylon • Fits belts up to 5" wide. CAT. NO. UPC NO. DESCRIPTION 750C 750C 08685 Cabling Pouch Tone and Probe Carrying Case • Allows you to build your own kit using any tone generator and 200 Series probe • Durable woven nylon • Fits belts up to 3" wide CAT. NO. UPC NO. DESCRIPTION 700C 08683 Tone and Probe Carrying Case 700C TRUSTED SINCE 304 www.greenlee.com 1862

= NEW PRODUCT = REPLACEMENT PART = ACCESSORY B = BARE TOOL STRUCTURED WIRING TESTERS NETcat® Pro 2 NC-500 • Test and troubleshoot telephone, data and coax wiring • NETcat Pro 2 Additional Features: – Gigabit device capability detection (still detects 10baseT and 100baseT too) – Cable type, velocity of propagation library, user editable – Power over Ethernet (PoE) detection – Memo pad • Detect split pairs, short circuits, broken and crossed wires • Step TDR technology shows length to open or short of all pairs • Test shielded twisted-pair (STP), unshielded twisted-pair (UTP) & coaxial cables. • Test patch cords and remote jacks NC-500 • Touch-screen control, included stylus slots into main unit • Large icons ensure easy use with your finger too • Large 3" (76mm) backlit high-contrast (user adjustable) monochrome display is highly visible in dark or brightly lit areas • Remote test and ID unit stores in base of main unit • Can identify up to 8 remote test ID units (7 extra available in NC-510 accessory kit along with carrying case) • Tone generator with four selectable precision frequency tones, compatible with Greenlee advanced digital signal processing probes • Operates on single 9V battery with low battery indication SPECIFICATIONS Dimensions 3.3" x 1.4" x 6.7" (8.5 cm x 3.5 cm x 17 cm) Weight 0.45 lb. (200 g) NC-510 Power 9V Alkaline battery (PP3) (NC-500 not included) Requirements User Interface Display LCD Dot Pixels: 128 x 128 dots Viewing Area 60.0 x 58.4 Backlight White LED Buttons LCD touch-screen, Single momentary contact push button Environmental Operating 0°C to 50°C Temperature Storage -20°C to 70°C Temperature NC-520 Interface RJ45 shielded jacks Connections F-type threaded female coaxial connectors TDR User selectable based on a known cable length. NC-500 Contents: Calibration 40% to 100% in steps of 1% • NETcat Pro 2 main unit with stylus TDR Range 0 to 2000 ft. - • Removable remote jack and patch lead test and ID unit Resolution 1 ft. (0.3 m) • Twisted-pair (modular RJ45), coax (F) and Accuracy to ±4% or 2 ft. (0.6 m) whichever is greater alligator clip test cords Open/Short • 9V alkaline battery Remote 2000 ft. (609.6 meters) maximum distance NC-510 NETcat Pro 2 Accessory Kit Contents: Identifier Wiremap 358 ft (100 meters) maximum distance • Seven additional remote jack test and ID units, RJ45 and F (male) • Carrying case to hold additional remote test ID units CAT. NO. UPC NO. DESCRIPTION and content of NC-500 main kit NC-500 23639 NETcat Pro 2 Digital VDV Wiring Troubleshooter NC-520: NC-510 23640 NETcat Pro 2 Accessory Kit w/carry case • Netcat Pro 2 Main Unit With Stylus NC-520 05450 Netcat Pro 2 Main Unit With Stylus • Removable Remote Jack And Patch Lead Test and Id Unit • Twisted-Pair (Modular Rj45), Coax (F) And Alligator ClipTest Cords • Seven additional remote jack test and ID units, RJ45 and F (male) • Carrying case to hold additional remote test ID units and content of NC-500 main kit • 9V Alkaline Battery www.greenlee.com 305

COMMUNICATIONS COPPER & DSL TESTING NETcat® Micro NC-100 • Tests shielded twisted pair (STP), unshielded twisted pair (UTP) and coaxial cables • TIA/EIA standard wiring pair verification • Detects shorts, opens, reversed polarity, crossed and split pairs • Generates three distinct, selectable digital tone patterns for cable tracing and troubleshooting • Tracing modes can be adjusted for high performance LAN cables. • Complete set of connector types standard (telephone, LAN and coax) • Nested remote allows end-to-end testing of all wiring types • Simple testing of LAN wiring and phone lines • Detection of common wiring and connector errors • Warning of hazardous voltages • Checks for reversed telephone wires SPECIFICATIONS Dimensions 150 x 70 x 33mm Weight 220g including remote unit and battery Power Source 9V Alkaline battery (PP3) User Interface Display LCD Icon and seven segment type NC-100 Backlight Green LED Buttons Four momentary contact push button Environmental Operating 0°C to 50°C Temperature Storage -10°C to 60°C Temperature Humidity up to 95% non-condensing Interface RJ45 shielded socket Connections RJ12 6-way socket F-type threaded female coaxial connectors Network Split Minimum cable 2 to 3 meters (5 to 10 ft.) depending on cable type Pair Detection length Pair Tracing Alternating frequencies of 577Hz and 983Hz are produced at three user se- Tones lectable rates. Designed for standard tone probes, but compatible with precision digital Greenlee tone probes. CAT. NO. UPC NO. DESCRIPTION NC-100 23636 NETcat® Micro Digital Voice Data and Video Wiring Tester TRUSTED SINCE 306 www.greenlee.com 1862

= NEW PRODUCT = REPLACEMENT PART = ACCESSORY B = BARE TOOL LAN ProNavigator® Tester & Remote • Simple PASS/FAIL test results in one second allows technicians to quickly move on to the next test site • Generates oscillating audio tone for use with tone probes to locate cables • Tests data and telephone cables up to 320 feet (100 meters) for proper pairing for EIA/TIA-568A, EIA/TIA-568B, Token Ring, 10 Base T, and common category 5 configurations • Tests unshielded UTP and shielded STP data cable • Detects good connections, open connections, crossed wires and split pairs • Tests common BNC connected 50 and 75 ohm coaxial cables up to 320 feet (100 meters) for continuity • Tests coaxial cable types RG58, RG59, RG6, RG6 Quad, Belden 8281, RG8, RG11 and more • Belt clips provided and lanyard holes embedded in case to attach to belt or wrist • Features low battery test and auto-off function to preserve battery life • Includes standard 9V battery CAT. NO. DESCRIPTION PA1543 LAN ProNavigator® test set (main & remote), 2 RJ45 patch cords, 2 belt clips, 12 oz.(342 g) PA1543 PA901066 LAN ProNavigator® test set (main & remote), 2 RJ45 patch cords, 2 BNC coaxial cables, 2 CATV “F”-to-BNC adapters, 1 BNC/BNC adapter, 1 shielded RJ45 coupler, 2 belt clips in durable case PA901074 Adapter, CATV “F” (female) to BNC (male) NOTE: May not be compatible with CAT-6 flat or oval cable, or bonded cable. SPECIFICATIONS MAIN REMOTE KIT Weight 8 oz. (228 g) 2 oz. (57 g) 2 oz. (1140 g) PA901066 Dimensions 5.25" x 6.75" x 2.25" 3.45" x 1.6" x 0.9" 8.5" x 7.6" x 3" 133 mm x 171 mm x 57 mm 87 mm x 41 mm x 24 mm 216 mm x 193 mm x 76 mm www.greenlee.com 307

COMMUNICATIONS COPPER & DSL TESTING Wiremap Tester • Quickly identifies opens, shorts, reversals and transposed pairs • Economical tester includes all the basic functions • Connecting the receiver unit automatically activates the test process • Sequencing red and green LEDs provide fast, accurate and simple-to- understand results • Alerts the technician if connected to an active circuit without harming the unit • Connect any eight-position modular plug to the appropriate jack on the transmitter and a sweeping tone signal is applied to all pairs • At the far end of the cable, use any Greenlee Communications inductive amplifier (probe) to locate the corresponding plug or jack • Battery operated (9V not included) CAT. NO. UPC NO. DESCRIPTION 468 468 08661 Wiremap Tester 468C 60382 Carrying Case for the Wiremap Tester 468T 60379 Transmitter 468R 60380 Receiver CSI0 60381 Modular Adapter Cable Data/Link ID and Cable-Check™ • Cable mapping function tests data & phone connection schemes including patch cords and installed cables • Identifies cross-over telephone connections • Detects PC (NIC) & HUB data transmissions and PC (NIC) & HUB NLP or FLP link pulse • Identify data & link transmission speeds with real time detection: 100/10 MB • Automatically scans with choice of slow or fast speeds • Low battery detection on LAN ID tester • Includes 9V battery, 2 RJ45 patch cords and durable nylon carrying case with belt loop CAT. NO. DESCRIPTION PA1576 Data/Link ID and Cable-Check™ PA1576 TRUSTED SINCE 308 www.greenlee.com 1862

= NEW PRODUCT = REPLACEMENT PART = ACCESSORY B = BARE TOOL LAN Cable-Check™ • Identifies cross-over telephone connections • Automatically scans when cables connected and unit turned on • Two scan speeds: fast or slow • Maps connector and cable pin-out • Tests cables up to 1,650’ or 500 m • Also tests RJ11 connections using an RJ11 adapter (not included). • 2, RJ45 patch cords and 9V battery included • Contained in a durable nylon carrying case with belt loop CAT. NO. DESCRIPTION PA1574 LAN Cable-Check™ Tester PA1574 LAN and A/V Cable-Check™ Network • Tests RJ45 patch cords and network installations to identify good connections, opens, shorts or cross-connections • Identifies data and telephone connection schemes • Maps cable pin-out Coax • Tests continuity of cords and installed cable runs • Identifies good connections, opens and shorts Features and Benefits: • Automatic scanning • User selectable slow or fast speeds • Quickly check cable installations and patch cords • Easy-to-use with clear LED read-outs Includes: • 2 RJ45 patch cords • 9V battery • 75-ohm male terminator • Durable, nylon carrying case PA1594 • Cable TV “F” female adapter • RCA to CATV "F" adapter. CAT. NO. DESCRIPTION PA1594 LAN and A/V Cable-Check™ PC Cable-Check™ PRO • Quickly & easily troubleshoot cables to eliminate the cable as the source of a problem • True cable mapping for over 20 different cable types: BNC coax & S-Video, VGA, Firewire, USB & Mini-USB, PS/2, parallel printer, RS-232 serial and Cat5e or Cat6 LAN • Supports these connectors: male and female DB9, DB15, DB25 and HDB15; 36-pin Centronics printer; RJ11, RJ12, RJ45 shielded & unshielded; BNC coax female; male and female mini-DIN6; female mini- DIN4; USB-A and USB-B; mini-USB 5-pin; IEEE 1394 FireWire 4- and 6-pin • Tests 50 ohm cables up to 1000’ (305 m) & 75 ohm cables up to 600’ (183 m) • Easy to read and understand LED indicator lights • New rugged case with built-in handle for easy transport • Auto scan or manual scan modes • Rubber feet grip to desk or bench to prevent slipping • Auto-off after 30 seconds of non-use to extend battery life PA1577 • 9V battery included CAT. NO. DESCRIPTION PA1577 PC Cable-Check™ Pro www.greenlee.com 309

COMMUNICATIONS COPPER & DSL TESTING BURIED FACILITY LOCATION AND MARKING Tracker II • Traces the path and determines the depth of wires and metallic pipes on active or dead systems without having to deactivate the system • Lightweight receiver provides audible and visual indications of signal strength • Transmitter output and receiver sensitivity are fully adjustable for maximum accuracy • Transmitter offers three methods of connection: direct, inductive coupler and inductive antenna • Includes transmitter assembly, receiver assembly, inductive coupler (clamp), built-in inductive antenna, two 8' (2.4 m) test leads with heavy-duty alligator clips and durable polyethylene case • High frequency transmitter provides range up to 4,000' (1,219 m) and depths 501 up to 7' (2 m) HS-1 (08695) • Receiver is 32" long (813 mm) Optional headset is available • Battery operated (eight AA and one 9V battery is included) for use in high-traffic areas or other noisy environments. • Molded carrying case included CAT. NO. UPC NO. DESCRIPTION SPECIFICATIONS 501 08662 Tracker II Power Requirements Transmitter – (8) AA batteries; Receiver – (1) 9V battery 501T 60353 Transmitter Battery Life Transmitter – 30 hours nominal; Receiver – 10 hours nominal 501R 60352 Receiver Transmitter Frequency 447.5kHz IC1 60354 Inductive Clamp Transmitter Power 40Vp-p (140mW) maximum CS16 60355 Transmitter Cord Set Voltage Protection 240VAC/500VDC 500CA 60351 Case with Antenna Automatic Shut Off 90 Min. Transmitter and Receiver Construction Transmitter/Receiver – powder coated aluminum Case – vacuum formed polyethylene Dimensions Transmitter – 4.25" x 3" x 3.25" (108 x 76.2 x 82.6 mm) Receiver – 32" x 2.75" x 4" (812.8 x 69.9 x 101.6 mm) Case – 33.5" x 8.25" x 3.75" (850.9 x 209.6 x 95.3 mm) Weight 6.7 lbs. complete kit (3.04 kg) Buried Line Locator • LED and LCD signal strength indicators make it quick and easy to find exact line location • Lightweight and ergonomically balanced • Automatic signal boost makes it easy to trace lines, even those with very weak signals BLL-200 • Receiver may be used in active or passive mode • Receiver locates multiple passive frequencies with a single setting • Receiver automatically locks out passive range when it detects a transmitter signal, reducing the chance of tracing other lines carrying weaker signals • Microprocessor-based circuitry delivers increased accuracy and features auto-gain control in all environments • Traces 20' (6 m) underground and provides depth readings up to 15' (4.57 m). • Transmitter can be connected to live lines up to 600V • Molded carrying case included • Limited Lifetime Warranty CAT. NO. UPC NO. DESCRIPTION SPECIFICATIONS BLL-200 07796 Buried Line Locator Transmitter Receiver Operating Voltage 0-600VAC, Depth Range Measures: 0-15 ft 0-300 VDC Traces: 0-20 ft. Current 13mA (open line) Depth Resolution 0.1 ft. increments 150mA (live or shorted line) Passive Trace Frequency - 12Hz-24kHz Frequency 33.3kHz Operating Temperature 0°F to 120°F Operating Temperature 0°F to 120°F (-17°C to 50°C) (-17°C to 50°C) Size 4.1" x 8.5" x 38" Size 7.5" x 4" x 2.1" (104.1 mm x 215.9 mm x 965.2 mm) (190.5 mm x 101.6 mm x 53 mm) Power 6 VDC (4 AA batteries) Power 6 VDC (4 AA batteries) Weight 1 lb. 12 oz. (794 g) Weight 15 oz. (425 g) (with batteries and clamp) TRUSTED SINCE 310 www.greenlee.com 1862

= NEW PRODUCT = REPLACEMENT PART = ACCESSORY B = BARE TOOL BURIED FACILITY LOCATION AND MARKING Pulser Fault Locator • Identifies the exact location of even the smallest breaks in insulation by “pulsing” a high-voltage signal that radiates into the earth at the location of the faults. With the A-frame mounted receiver, a visual analog meter PE2003 points the way to the source of the voltage Great complement to any buried line cable locator. • Multiple faults on a single wire can be identified indicating the need to replace instead of repair • Extra-long test leads feature heavy-duty alligator clips for use on multiple cable types • Includes a rechargeable transmitter, receiver, A-frame, ground stake, 120V charger and a 12V DC (cigarette lighter) adapter • Battery operated (one 12V and one 9V battery are included) • Molded carrying case included SPECIFICATIONS Power Requirements Transmitter: (1) 12V rechargeable battery Receiver: (1) 9V battery Battery Life Transmitter: 23 hours per charge; Receiver: 200 hours PE2003 Transmitter Power 2400VDC peak Voltage Protection 240VAC/400VDC Construction Transmitter – aluminum housing in polyethylene case Receiver – powder coated aluminum CAT. NO. UPC NO. DESCRIPTION Dimensions Transmitter – 17" x 8.5" x 6.5" (421 mm x 215 mm x 160 mm) PE2003 08666 Pulser in case 2000H 60357 Transmitter (Includes CH1 & CH2) Receiver – 33.5" x 21.75" x 3.25" (840 mm x 550 mm x 8 mm) 2000R 60358 Receiver on A-Frame AF2 60482 A-Frame Weight 12.5 lbs. (5.7 kg) complete CH1 60360 AC Charger CH2 60361 DC Charger 59F0002 66216 Battery, Replacement (12V 2.5 Ah) Wire Finder/Mini Locator • Traces energized or non-energized wires in walls and drop ceilings • Provides reliable results on buried cables to depths of 3' (1 m) and lengths up to 1000' (308 m) • Determines the approximate depth of the wire before digging • Compact design and easy-to-understand operations • Fully adjustable transmitter and receiver for accurate locating 508S • Quick change test leads for use in any industry, even international power outlets • Voltage protection to allow use on live AC circuits • Automatic shut-off to prevent accidental battery discharge • Housed in a durable, molded carrying case with a quick reference o peration guide on the inside of the lid • Battery-operated: (2) 9V batteries included SPECIFICATIONS Power Requirements (1) 9V each (transmitter and receiver, included) Battery Life Transmitter 35 hours nominal; Receiver 20 hours nominal Transmitter Frequency 447.5kHz Transmitter Power 9Vp-p (11mW) Voltage Protection 240VAC/500VDC Construction Transmitter/Receiver – high-impact ABS plastic, CAT. NO. UPC. NO DESCRIPTION Case – vacuum-formed polyethylene 508S 08678 Wire Finder/Mini Locator Dimensions Transmitter – 4" x 2.3" x 1" (101.6 x 58.4 x 25.4 mm), Receiver – 508ST 60363 Transmitter 6" x 2.35" x 1" (152.4 x 59.7 x 25.4 mm), 508SR 60364 Receiver Case – 9.5" x 8" x 3"(241.3 x 203.2 x 76.2 mm) CS14 60366 Alligator Clip Cord set Weight 2.6 lbs. (1.2 kg) CS15 60367 AC Outlet Cord set www.greenlee.com 311

COMMUNICATIONS COPPER & DSL TESTING Wire and Valve Locator • Adjustable transmit power allows you to select the best signal for maximum performance • Transmitter’s high power output offers extended range and use on higher resistance wire paths that other locators can’t touch • Receiver provides both audible and visual indications of signal strength. • Lightweight receiver wand makes it easy for you to move along quickly to locate even the longest wire path • Rugged headphones block ambient noise and improve “feel” for the s ignal • Includes transmitter, receiver, headset, ground stake, and complete i nstructions • Battery-operated: (8) “D” Cells and (1) 9V SPECIFICATIONS 521A Power Requirements Transmitter: (8) “D” Cell; Receiver: (1) 9V battery Battery Life Transmitter: 50 hours nominal Receiver: 100 hours nominal CAT. NO. UPC NO. DESCRIPTION Transmitter Frequency 1748Hz 521A 86788 Wire and Valve Locator Transmitter Power 750Vp-p 285Vrms 521A-R 12623 Receiver Voltage Protection 120VAC/250VDC HS-1 08695 Headset Construction Powder-coated aluminum housing in polyethylene case Case Dimensions 33.5" x 8.25" x 3.75" Weight 12 lbs. complete Locators Application Guide FEATURE BLL-200 501 PE2003 508S 521A Trace concealed wiring in walls and floors • • Locate junction box relays and transformers • Locate switch gear • Find shorts to ground •2 •1 Trace wires in PVC (nonmetallic conduit) • • • Find opens in a circuit • Localize power and lighting panels • • • Operate on energized circuits • • • Operate on telecom circuits • • • • Operate on power circuits (600VAC) • Operate on unenergized circuits • • • • • Trace shielded cable • •3 •3 •3 Trace buried metal conduit Trace coax cable • •5 •5 •4 Auto gain circuitry for improved accuracy • AC voltage range 0-600V 0-240V 0-240V 0-240V 0-120V DC voltage range 0-300V 0-500V 0-400V 0-500V 0-250V Distance–receiver from transmitter 5,000 ft. •7 5000 ft. 1000 ft. •6 Transmitter battery (4) AA (8) AA 12V (1) 9V (8) D rechargeable Receiver battery (4) AA (1) 9V (1) 9V (1) 9V (1) 9V 1. 10,000 ohms and less–both ends isolated from grounds. 7. Direct Connection 4,000 ft at 7 ft deep 2. Does not locate the path–has to be predetermined and only in direct burial applications. 5,000,000 and less. Inductive Coupler 1,000 ft at 3 ft deep 3. Transmitter connected to metallic shield. Inductive Antenna 700 ft at 3 ft deep 4. Will trace coax providing the bOnd is in place at the remote end–will disrupt service. 5. No sorting (high RF bleeds) can trace coax if transmitter connected to braid. 6. Low frequency locators need a “path to earth” (dirt), 5000 ft. on an open conductor and 2500 ft. on a metallic pipe at 3 ft. deep TRUSTED SINCE 312 www.greenlee.com 1862

= NEW PRODUCT = REPLACEMENT PART = ACCESSORY B = BARE TOOL Marker-Mate® • Designed to locate buried electronic markers, including Omni Marker™, and Uni Marker® • Five+ foot depth range • Detects up to seven different marker types • Scan mode provides simultaneous detection of all marker types • User-adjustable Detection Threshold • Digital signal processor accuracy • Large-character display is easy to read • Bar graph, numeric & audible signal strength indicators • Speaker volume adjust • Headphone jack • Battery level indicator • Low battery warning • Adjustable time out feature prolongs battery life (and can be turned off) • Weather resistant • Rugged construction SPECIFICATIONS Electrical: Twelve AA batteries Battery Life: 20 hours typical Environment: Operating Temperature: -4°F to 122°F (-20°C to 50°C) Storage Temperature: -40°F to 158°F (-40°C to 70°C) Weather Resistant Physical: Length: 30.7 in. (780 mm) Width: 7.8 in. (198 mm) Height: 12.8 in. (325 mm) EML100 Weight: 4.5 lbs. with batteries (2 kg) CAT. NO. UPC NO. DESCRIPTION EML100 60798 Marker-Mate Electronic Marker Locator Omni Marker™ • Electronically marks and relocates buried facilities • Unique design produces a uniform, spherical RF field in every direction • Easily located up to 5' away with any modern marker locator • Wider field with a signal peak directly above the marker provides precise location • Requires no particular orientation when buried • Greater range than standard 4" ball markers • High-reliability design lasts as long as your buried plant • Color coded by utility application • Patented • Limited lifetime warranty APPLICATION COLOR FREQUENCY CAT NO. UPC NO. Power Red 169.8 kHz 0160-0001-1 60765 Water Blue 145.7 kHz 0161-0001-1 60766 Sanitary Green 121.6 kHz 0162-0001-1 60767 Telephone Orange 101.4 kHz 0163-0001-1 60768 Gas Yellow 83.0 kHz 0164-0001-1 60769 Cable TV Orange/Black 77.0 kHz 0165-0001-1 60770 Non-Potable/Gen I Purple 66.35 kHz 0168-0001-1 11050 EuroPower Red/Blue 134.0 kHz 0181-0001-1 05160 www.greenlee.com 313

COMMUNICATIONS COPPER & DSL TESTING Uni Marker® • Electronically marks buried facilities for later relocation • Rugged polyethylene case ensures years of useful life • Small size and flat design attach easily to non-metallic utility box lids, hand holes and other buried enclosures • Location is simple with any modern marker locator • Range is 25% more than other similar-style markers • Signal peak ensures location within inches of the marker • Color coded by utility application • Limited lifetime warranty APPLICATION COLOR FREQUENCY CAT NO. UPC NO. Power Red 169.8kHz 0170-0001-1 60771 Water Blue 145.7kHz 0171-0001-1 60772 Sanitary Green 121.6kHz 0172-0001-1 60773 Telephone Orange 101.4kHz 0173-0001-1 60774 Gas Yellow 83.0kHz 0174-0001-1 60775 Cable TV Orange/Black 77.0kHz 0175-0001-1 60776 Non-Potable/Gen I Purple 66.35kHz 0178-0001-1 11059 TRUSTED SINCE 314 wwwwww..ggrreeeennlleeee..ccoomm 1862

= NEW PRODUCT = REPLACEMENT PART = ACCESSORY B = BARE TOOL FIBER OPTIC TEST EQUIPMENT Optical Fusion Splicer • Designed to meet virtually any FTTx installation – indoors and out. P2P installations including backhaul, cellular, and LAN • Core alignment minimizes splice losses • Fully compatible with Greenlee® Splice-On Connectors. 250 Splice/ Shrink cycles per battery charge 910FS SPECIFICATIONS Applicable Fibers SM (G.652); MM (G.651); DS (G.653); NZDS (G.655); Fiber Display Magnification 240X BIF (G.657) Tube Heating Mode 20 Preset / User Definable Modes Fiber Cleaved Length 10mm Adjustable 0-240 seconds Cladding Diameter 80 to 150μm Tube Heating Time (Typical) 36 seconds Coating Diameter 100 to 1000μm Attenuator Mode 0.1 to 15 dB Fiber Count Single Electrode Life 3,000 Splices Fiber Aligning Method Auto Core Alignment Display 5.7" Color, Turn-Over LCD Splice Loss (Typical) 0.02 dB (SM); 0.01 dB (MM); 0.04 dB (DS); 0.04 dB Connectivity RS-232; USB (NZDS & BIF) Operating Conditions Pressure: 0 to 16,404 feet Splicing Mode 60 Preset / User Definable Modes (0 to 5,000 meters) above Sea Level Humidity: 0 to 95% Splice Time (Typical) 9 seconds (SM) Temperature: 14 to 122°F (-10 to 50°C) Number Of Splices Per Bat- 250 (including 60mm heat shrink cycle) Storage Conditions Temperature: -4 to 158°F (-20 to 70°C) tery Charge Power Supply 100 to 240V AC Adapter; Splice-On-Connector SC, LC, FC, ST Li-ion Battery (6600 mAh) Arc Calibration Mode Automatic and Manual Weight with Battery 6.92 lbs (3.14 kg) Protection Sleeve Length 60mm, 40mm, Micro Sleeves Dimensions (HxWxD) 7.08" x 6.29" x 6.10" (180 x 160 x 155 mm) Storage Of Splice Results 5,000 Results Tension Test 2N CAT NO. UPC NO. DESCRIPTION 910FS 01328 Optical Fusion Splicer 910FS-KIT1 01433 Fusion Splicer & Cleaver Kit 910FS-KIT2 01432 Contractor Fusion Splicer Kit 910FS-ELEC 01329 Replacement Electrodes 910FS-PS 01330 Replacement Power Supply 910CL 01331 Optical Fiber Cleaver 910CL-BLADE 01640 Cleaving Wheel 910FS-250 01332 250µm Adapter PA1171 910FS-900 01333 900µm Adapter 910FS-SOC-SC-LC 01335 Adapter, Splice-On Connector, SC & LC 910FS-SOC-ST-FC 02401 Adapter, Splice-On Connector, ST & FC 910FS-BATT 01452 Battery (910FS) 910FS-EUR-CORD 02571 European Line Cord 910FS-UK-CORD 02570 UK Line Cord 910FS-CHARG 02641 Battery Charger 910FS-CAR-ADAPTER 25689 12 V DC Car Adapter PA1171 12225 ProGrip 5-in-1 Fiber Optic Stripper wwwwww..ggrreeeennlleeee..ccoomm 315

COMMUNICATIONS FIBER PRODUCTS Optical Fiber Cleaver • Accurate Cleaves. Cleave multi-mode and single-mode fiber optic cables • Long Life. Blades rotate for longer life - over 48,000 cleaves • Adaptable. Supports 250um, 900um fibers • For use with the 910FS Optical Fusion Splicer for maximum speed and efficiency • Dust bin. Safely collects end cuts during cleaving process 910CL SPECIFICATIONS Applicable Fibers SM (G.652); MM (G.651); DS (G.653); NZDS (G.655); BIF (G.657) Fiber Cleaved Length 10mm Cladding Diameter 125μm Coating Diameter 0.25 mm and 0.9 mm Fiber Count Single Cleaving Angle < 1.5˚ Blade Life 48,000 Cleaves Weight 0.56 lbs (255 g) Note: If the 910CL is purchased without a Dimensions 2.29" x 2.17" x 1.89" (58 x 55 x 48 mm) splicer. Please order either the 250um or 900um adapters or the fixed clamp. CAT. NO. UPC NO. DESCRIPTION 910CL 01331 Optical Fiber Cleaver 910CL-BLADE 16403 Cleaving Wheel 910C-CLAMP 31529 Fixed Clamp with Screw (910CL) 910FS 01328 Optical Fusion Splicer 910FS-250 01332 250µm Adapter 910FS-900 01333 900µm Adapter PA1171 12225 Buffer Strippers PA1511 10312 Kevlar Cutter Splice-On Connector • Return loss: APC >60dB, UPC >55dB and MM 35dB (typical) • 19 styles available: SM, MM, 10Gig • Compatible with selected AFL, Sumitomo, and Fitel fusion splicers, suitable adapter may be required • 900um boot protects splice for easy cable management • Includes color coded 900um buffer, boot, cleave protector and extended dust cap for easy fiber indentification SPECIFICATIONS Connector Type SM/APC SM/UPC MM/62.5UM MM/50UM MM/0M3 MM/0M4 Insertion Loss (Max) 0.3dB 0.4dB Optical Return Loss >65dB >55dB 35dB (Typical) Ferrule Type All Zirconica Pre-Polished Ferrules Color Code Green White Beige Black Aqua Aqua Operating Temperature -40 to 85 degrees C Industry Standards RoHS Compliant, Tecordia GR-326-CORE Compliant COMPATIBLE FUSION SLICERS Manufacturer AFL Sumitomo Fitel INNO FIS Model FSM11 FSM-17S FSM-18S Type-25e S122 IFS10 CA3 (S/M) (U/S/M) (A/C/M/) FSM-19S Type-39FH S121 (A/M) IFS15 FSM-60(S/R) Type-46 S123 (C/M) FSM-70(S/R) Type-66 S153 Quantum S178A (Q101-CA) Compatible All SC and SC,LC and All All All All fiberTOOLS® SOCs Versions LC Only ST Only Versions Versions Versions Versions TRUSTED SINCE 316 www.greenlee.com 1862

= NEW PRODUCT = REPLACEMENT PART = ACCESSORY B = BARE TOOL Splice-On Connectors & Adapters CAT. NO. CAT. NO. UPC UPC DESCRIPTION (12 PACK) (100 PACK) SCAPC-SOC-12 02302 SCAPC-SOC-100 02360 SC/APC Singlemode, Green 900µm Boot SCUPC-SOC-12 02303 SCUPC-SOC-100 02361 SC/UPC Singlemode, Blue 900µm Boot SC62-SOC-12 02304 SC62-SOC-100 02364 SC/PC 62.5µm Multimode (OM1), Beige 900µm Boot SC50-SOC-12 02305 SC50-SOC-100 02365 SC/PC 50µm Multimode (OM2), Black 900µm Boot SCOM3-SOC-12 02306 SCOM3-SOC-100 02368 SC/PC 50µm Multimode (OM3), Aqua 900µm Boot SCOM4-SOC-12 02308 SCOM4-SOC-100 02371 SC/PC 50µm Multimode (OM4), Aqua 900µm Boot FCAPC-SOC-12 02313 FCAPC-SOC-100 02372 FC/APC Singlemode, Green 900µm Boot FCUPC-SOC-12 02314 FCUPC-SOC-100 02377 FC/UPC Singlemode, Blue 900µm Boot FC62-SOC-12 02316 FC62-SOC-100 02378 FC/PC 62.5µm Multimode (OM1), Beige 900µm Boot FC50-SOC-12 02322 FC50-SOC-100 02379 FC/PC 50µm Multimode (OM2), Black 900µm Boot FCOM3-SOC-12 02323 FCOM3-SOC-100 02381 FC/PC 50µm Multimode (OM3), Aqua 900µm Boot FCOM4-SOC-12 02328 FCOM4-SOC-100 02384 FC/PC 50µm Multimode (OM4), Aqua 900µm Boot STUPC-SOC-12 02330 STUPC-SOC-100 02385 ST/UPC Singlemode, Blue 900µm Boot ST62-SOC-12 02332 ST62-SOC-100 02386 ST/PC 62.5µm Multimode (OM1), Beige 900µm Boot ST50-SOC-12 02334 ST50-SOC-100 02387 ST/PC 50µm Multimode (OM2), Black 900µm Boot STOM3-SOC-12 02335 STOM3-SOC-100 02388 ST/PC 50µm Multimode (OM3), Aqua 900µm Boot STOM4-SOC-12 02343 STOM4-SOC-100 02389 ST/PC 50µm Multimode (OM4), Aqua 900µm Boot LCAPC-SOC-12 02345 LCAPC-SOC-100 02390 LC/APC Singlemode, Green 900µm Boot LCUPC-SOC-12 02346 LCUPC-SOC-100 02395 LC/UPC Singlemode, Blue 900µm Boot LC62-SOC-12 02348 LC62-SOC-100 02397 LC/PC 62.5µm Multimode (OM1), Beige 900µm Boot LC50-SOC-12 02351 LC50-SOC-100 02398 LC/PC 50µm Multimode (OM2), Black 900µm Boot LCOM3-SOC-12 02355 LCOM3-SOC-100 02399 LC/PC 50µm Multimode (OM3), Aqua 900µm Boot LCOM4-SOC-12 02359 LCOM4-SOC-100 02400 LC/PC 50µm Multimode (OM4), Aqua 900µm Boot ADAPTER UPC DESCRIPTION AFL SOC ADAPTER 01304 AFL/Fujikura SOC Adapter FITEL SOC ADAPTER 02052 Furakawa/Fitel SOC Adapter SUMI SOC ADAPTER 02058 Sumitomo SOC Adapter INNO SOC ADAPTER 02060 Inno SOC Adapter FIS SOC ADAPTER 02062 FIS Super Cougar SOC Adapter www.greenlee.com 317

COMMUNICATIONS FIBER PRODUCTS 930XC Handheld Singlemode OTDR CAT. NO. UPC NO. DESCRIPTION 930XC-20C UPC SC 89882 Handheld OTDR, 1310/1550 nm, SC/UPC 930XC-20C UPC FC 89872 Handheld OTDR, 1310/1550 nm, FC/UPC 930XC-20C UPC ST 89877 Handheld OTDR, 1310/1550 nm, ST/UPC 930XC-20C APC SC 89892 Handheld OTDR, 1310/1550 nm, SC/APC 930XC-20C APC FC 89887 Handheld OTDR, 1310/1550 nm, FC/APC 930XC-30P UPC SC 19237 Handheld OTDR, 1310/1490/1550 nm, SC/UPC 930XC-30P UPC FC 19238 Handheld OTDR, 1310/1490/1550 nm, FC/UPC 930XC-30P UPC ST 19239 Handheld OTDR, 1310/1490/1550 nm, ST/UPC 930XC-30P APC SC 19240 Handheld OTDR, 1310/1490/1550 nm, SC/APC 930XC-30P APC FC 02618 Handheld OTDR, 1310/1490/1550 nm, FC/APC 930XC-30F UPC SC 19247 Handheld OTDR, 1310/1550/1625 nm, SC/UPC 930XC-30F UPC FC 19248 Handheld OTDR, 1310/1550/1625 nm, FC/UPC 930XC-30F UPC ST 02621 Handheld OTDR, 1310/1550/1625 nm, ST/UPC 930XC-30F APC SC 19249 Handheld OTDR, 1310/1550/1625 nm, SC/APC 930XC-30F APC FC 19250 Handheld OTDR, 1310/1550/1625 nm, FC/APC 930XC-20M PC FC 25688 Handheld OTDR, 850/1300 nm, FC/PC 930XC-20M PC SC 25689 Handheld OTDR, 850/1300 nm, SC/PC • Up to 38 db dynamic range 930XC-20M PC ST 25690 Handheld OTDR, 850/1300 nm, ST/PC • Large backlight LCD display 946 60571 Cleaning Wand 10/PK • Measure length and defects of coiled fiber 948 60692 REEL Cleener CONN Cleaner (948) • Fiber analysis software for data management 20988 20988 Soft Carrying Case 20989 20989 USB Cable for OTDR and report generation 20990 20990 RS-232 Cable • 1625 nm operation for live fiver testing AC-CONN-FC-L2 20996 FC Connector (for UPC & APC) • RS-232/USB interface AC-CONN-ST-L2 20997 ST Connector (for UPC only) • Economical AC-CONN-SC-L2 20998 SC Connector (for UPC & APC) • Compact handheld design AC-ADPT-20-UNIV 25691 Power Supply Universal • Easy to use 930XC-QR 25692 Quick Reference Guide - UN • Fast automated testing 20999 20999 NiMH Battery (9.6V) • NiMH batteries for 8 hours continuous use 1155-0526 10582 Car Adapter 930XC-SM-MM 02729 OTDR Kit - Single and Multimode OTDR Kit. SINGLEMODE SPECIFICATIONS Fiber Type 930XC-20C 930XC-30F 930XC-30P 930XC-20M Wavelength (± 20nm) 1310/1550 1310/1550/1625 1310/1490/1550 800/1300 Dynamic Range (dB) 35 38 38 18/22 Event deadzone (m) 2.5 1.5 2.5 7 Attenuation Deadzone (m) 14 10 14 20 Emitter Type Laser LED Pulsewidth (ns) 5, 10, 30, 100, 300, 1 us, 2.5 us, 10 us, 20 us 12/30/100/275/1us (850nm) 30/100/275/1us/2us (1300nm) Selectable Ranges (km) 0.3/1.3/2.5/5/10/20/40/80/120/160/240 0.1/0.3/0.5/1.3/2.5/5/10 (850nm) 0.1/0.3/0.5/1.3/2.5/5/10 /20/40/80 (1300nm) Average Time 15s/30s/1 min/2 min/3 min Distance measurement accuracy ±(1m + 5 X 10-5 x distance + sampling space) Connector Type UPC or APC (interchangeable FC, SC, ST) Visual Fault Locator Wavelength 650 nm Peak power output -3 dBm Connector interface (interchangeable FC, SC, ST) Fiber Analysis Software Reflection detect accuracy ±4 dB Attenuation detect accuracy ±0.05 dB/dB Measurement data storage 1,000 test curves Data transmission RS-232/USB port General Power Supply NiMH chargeable battery/AC adapter Battery Life Support over 8 hours operating on one charge or over 20 hours standby Operating Temperature -10° to 50° C Storage Temperature -20° to 60° C Relative Humidity 0 to 95% (non-condensing) Weight 1.9 lbs. (0.87 kg) Dimensions 7.7" H x 3.9" W x 2.4" L (196mm x 100mm x 64mm) TRUSTED SINCE 318 www.greenlee.com 1862

= NEW PRODUCT = REPLACEMENT PART = ACCESSORY B = BARE TOOL Fiber Identifier • Non-intrusive low insertion loss prevents alarm conditions • Identifies fiber with tone detect and a clear indication of signal transmission direction • Supports all common fibers including 250μm, 900μm, 2mm, and 3mm and is able to sense light in bend insensitive fibers SPECIFICATIONS Identified Wavelength Range 800-1700nm Identified Signal Type 270Hz ±5%, 1kHz ±5%, 2kHz ±5% Detector Type 1mm InGaAs Ø0.25 (Applicable for Bare Fiber) Ø0.9 (Applicable for Ø0.9 Cable) Adapter Types Ø2.0 (Applicable for Ø2.0 Cable) FI-100 Ø3.0 (Applicable for Ø3.0 Cable) Signal Indication Left & Right LED SPECIFICATIONS Signal Direction Test Range -46 to 10dBm (1310nm) ENVIRONMENTAL (CW/0.9mm fiber) -50 to 10dBm (1550nm) Operating temperature -10 ° C to +60° C Signal Power Test Range -50 to +10dBm Storage temperature -25° C to +70° C (CW/0.9mm fiber) Dimensions 14.2 x 4.3 x 3.3 cm (5.6 x 1.7 x 1.3 in.) Signal Frequency Display 270Hz, 1kHz, 2kHz Weight 120 g (4.2 oz.) with batteries Certifications CE, FCC, WEEE -30 to 0dBm (270Hz, 1kHz) Ø0.9, Ø2.0, Ø3.0 Tone Detect Test Range -25 to 0dBm (2kHz) (Average) -25 to 0dBm (1kHz, 2kHz) Ø0.25 -20 to 0dBm (2kHz) Insertion Loss 0.3 / 0.8dB at 1310nm (Typical/ Maximum) 1.5 / 2.5dB at 1550nm Battery AAA Alkaline (2) CAT. NO. UPC NO. DESCRIPTION FI-100 Kit 03353 Fiber Identifier Kit FI-100-250 03354 250µm Adapter FI-100-900 03355 900µm Adapter FI-100-2MM 03356 2mm Adapter FI-100-3MM 03357 3mm Adapter FI-100-CASE 03358 Soft Carry Case FI-100-SUNSHADE 03359 Sun Shade www.greenlee.com 319

COMMUNICATIONS FIBER PRODUCTS 180XL Visual Fault Locator • The 180XL can be used to confirm fiber continuity on fibers up to 7km in length • A 1.25mm adapter is available • Has up to 80 hours of operation • Ruggedized design - not made of plastic • Class 2 for safe operation - 1mW output power • 650nm propagates more efficiently than 635nm in single mode fiber SPECIFICATIONS Wavelength 650nm +/-10nm 180XL Output Power 0dBm (1mW) Maximum Distance 7km Laser Classification 2 Bulkhead 2.5mm Universal 1.25mm adapter available Battery AA (2) Battery Life 80 hours Weight 120 g (not including batteries) Dimensions 180mm x 15mm (diameter) CAT. NO. UPC NO. DESCRIPTION 180XL 84501 Visual Fault Finder Fiber Cleaning Pens - 1.25mm & 2.5mm • Cleans 2.5mm & 1.25mm ferrules and bulkheads • Compact, easy-to-use single click operation • Rated for 800 cleaning cycles • Anti-static design prevents secondary contamination SPECIFICATIONS Ferrule & Connector Sizes 1.25mm & 2.5mm Weight 1 oz (20g) Dimensions 7.1" x 0.7" x 0.7" (180mm x 18mm x 18mm) Working Temperature -10ºC to +50ºC Storage Temperature -30ºC to +70ºC CAT. NO. UPC NO. DESCRIPTION FCP-1.25 03577 1.25mm Cleaning Pen FCP-2.5 03576 2.5mm Cleaning Pen FCP-1.25mm FCP-2.5mm TRUSTED SINCE 320 www.greenlee.com 1862

= NEW PRODUCT = REPLACEMENT PART = ACCESSORY B = BARE TOOL Optical Light Sources • Durable and compact • Provides a stable light source • Interfaces to all industry standard connectors SPECIFICATIONS GDLS 350 GDLS 355 / GDLS 360 850nm & 1310nm, 1550nm Laser/ Wavelength 1300nm LED 1490nm, 1625nm Laser Output power - 20dBm Typical -4dBm Typical Laser Classification N/A Class 1 (FDA 21 CFR1040.11) +/- 0.05dB, 1 hour, + /- 0.03dB Output stability long after 15 minute warm-up Spectral Width 40nm/120nm 5nm/5nm Optical interface Universal Connector Interface (FC, SC, ST & LC ) Power on Push button ON, Auto shutoff Tone Output 2kHz GDLS 350 Dimensions 6.1 x 0.94 x 0.75in (15.5 x 2.38 x 1.90cm) Weight 3oz (85g) Operating Temperature -10C to 50°C SPECIFICATIONS Storage Temperature -30C to 60°C ENVIRONMENTAL Operating temperature -10 ° C to +50° C CAT. NO. UPC NO. DESCRIPTION Storage temperature -30° C to +60° C Optical Light Sources Weight 3 oz (85g) GDLS 350 00518 850/1300 Dual LED GDLS 355 00519 1310/1550 Dual Laser GDLS 360 03203 1490nm/1625nm Dual Laser 78-0160-70 21033 Single Instrument pouch Connector Options GAC 022B 00440 SC Adapter for source GAC 023B 00441 FC Adapter for source GAC 024B 00442 ST Adapter for source GAC 025B 00443 LC Adapter for source Note: SC Adapter included with all laser and LED sources www.greenlee.com 321

COMMUNICATIONS FIBER PRODUCTS Optical Power Meter • Singlemode and multimode application • Calibrated wave lengths of 850nm, 1310nm, 1490nm, and 1550nm • Data transfer via USB for the GRP 460 • 2kHz Tone detect • NIST traceable • Long Battery Life GRP 450-02 GRP 450-04 SPECIFICATIONS GRP 460-02 GRP 460-04 Diode Ge Filtered InGaAs Wavelength range 850nm to 1625nm Measurement range + 3 to – 60dBm +23 to –45dBm Resolution 0.01dB Absolute accuracy∆ +/- 0.25dB Universal 2.5mm (Order 1.25mm or screw on Optical interface adaptors separately) Tone identification 2kHz Incoming signal, Audible Alert GRP460 Power on Push button ON, Auto shutoff Storage Store up to 1000 measurements per wavelength* Data transfer Mini USB Port (1000 points/wavelength)* Dimensions 6.1 x 0.94 x 0.75 in (15.5 x 2.38 x 1.90cm) Weight 3.0oz (85g) CAT. NO. UPC NO. DESCRIPTION Optical Power Meter GRP 450-02 00502 Germanium, 0.01dB, Zero ref set GRP 450-04 00505 Filtered InGaAs, 0.01dB, Zero ref set GRP 460-02 00509 Germanium, 0.01dB, Zero/Set Ref GRP 460-04 00511 Filtered InGaAs, 0.01dB,Zero ref set 78-0160-70 21033 Single Instrument Pouch Connector Options: GAC 020 00525 2.5mm Universal Adapter GAC 021 00526 1.25mm Universal Adaptor GAC 026 00531 SC Adaptor for OPM GAC 027 00532 ST Adaptor for OPM GAC 028 00533 FC Adaptor for OPM GAC 029 00534 LC Adaptor for OPM GAC 126 02046 SC/APC Adapter for OPM GAC 540 02038 OptiTap Patchcord SC/APC for OPM Kit Options: Single Mode Kit Kit includes: 1-GDLS 355 1310/1550 Dual Laser GMFT-SM 03426 1-GDLS 350 850/1300 Dual LED 1-GRP 460-02 Optical Power Meter 1-Soft Carry Case Multimode Kit Kit includes GMFT-MM 03429 1- GDLS 350 850/1300 Dual LED 1- GRP 460-02 Optical Power Meter 1- Soft Carry Case Singlemode/Multimode Kit Kit includes 1- GDLS 355 1310/1550 Dual Laser GMFT-SM-MM 03431 1- GDLS 350 850/1300 Dual LED 1- GRP 460-02 Optical Power Meter 1- Soft Carry Case TRUSTED SINCE 322 www.greenlee.com 1862

= NEW PRODUCT = REPLACEMENT PART = ACCESSORY B = BARE TOOL Video Inspection Scope • Unique external focus mechanism eliminates need for “focus wheel” • 3/4 μm scratch resolution • Thin (less than 1” dia.) ergonomic probe design • Quick change adapter tips for all connector styles • 3.5 inch LCD Display • Advanced Li Ion Battery & smart technology AC charger system • Rugged and compact size SPECIFICATIONS FOV (Field of View) 630μm x 440μm GVIS 300-USB Resolution ¾ micron Light Source Blue LED Lighting Technique Coaxial Display screen size 3.5 in diagonal Battery Life 8 to 10 hours continuous Battery charge time 3 hours Probe – 180mm x 25mm x 19mm Size Monitor – 120mm x 89mm x 32mm Weight - (monitor, probe & 0.54kg case) Operating Temperature 0º to 50 ºC Storage Temperature -40ºC to 70 ºC CAT. NO. UPC NO. DESCRIPTION GVIS 300 Monitor w/USB option, Probe, SC Bulkhead GVIS 300 MP-USB 00540 and 2.5mm Universal Adaptor tips, battery charger, basic cleaning kit and hard carry case Video Inspection Scope • Automatic PASS/FAIL analysis equipped to meet IEC 61300-3-35 USB or Wi-Fi® streaming. Easily connects with laptops, smart phones, and tablets • Greenlee GVIS application for analysis and reporting • Unique external focus system and enhanced magnification produce clear high-definition images SPECIFICATIONS Live - 800μm x 600μm FOV (Field of View) Enlarge - 485μm x 365μm Magnify and center - 485μm x 365μm Resolution <1 micron Light Source White LED Lighting Technique Coaxial Size (Probe) Probe – 180mm x 25mm x 19mm Weight - (Probe( 102 g Operating Temperature 0º to 50 ºC Storage Temperature -40ºC to 70 ºC GVIS 400 CAT. NO. UPC NO. DESCRIPTION GVIS 400-HDP 03178 GVIS 400 Probe Auto Pass/Fail with USB www.greenlee.com 323

COMMUNICATIONS FIBER PRODUCTS Video Inspection Scope • Industry leading field of view • Transmits live images and data via Wi-Fi from the GVIS 400-HDP via GPAD 250 USB • PASS/FAIL via GPAD 250 conforming to IEC 61300-3-35 • Compatible with Greenlee inSpec and OpTest apps for Android • Wireless transmission of dB loss readings from the GRP 460 SPECIFICATIONS Dimensions 4.5”L x 1.5”W x 2.75”H (114 mm x 38 mm x 70 mm) Weight 0.5 lbs (23 kg) Wi-Fi Connectivity 802.11 abgn Wi-Fi Access Point Battery 11.1 volt lithium ion, 4 hour battery life Battery Charger AC Wall pack 12.6 volt lithium ion charger Communication Distance 200 feet / 61 meters (GPAD 250 to wireless device) GPAD-250 CAT. NO. UPC NO. DESCRIPTION GPAD-250 03179 Wi-Fi Portable Access Device - For use with the GVIS-400 HDP Video Inspection Scope Adapter Tips CAT. NO. UPC NO. DESCRIPTION GAC 034B 03180 E2000 Adapter GVIS GAC 040B 03181 SC Adapter GVIS GAC 041B 03182 SC/APC Adapter GVIS GAC 042B 03183 FC Adapter GVIS GAC 043B 03184 FC/APC Adapter GVIS GAC 044B 03187 LC Adapter GVIS GAC 045B 03188 LC/APC Adapter GVIS GAC 046B 03189 ST Adapter GVIS GAC 040B GAC 044B GAC 048B GAC 047B 03192 MTP/APC Adapter GVIS GAC 048B 03190 1.25mm Universal Adapter GVIS GAC 049B 03191 2.5mm Universal Adapter GVIS GAC 050B 03193 MTP Straight Adapter GVIS GAC 052B 01896 OptiTap SC/APC Adapter for GVIS GAC 104B 03199 FC Adapter, 60-Degree Angled GVIS GAC 107B 03202 SC Adapter, 60-Degree Angled GVIS GAC 109B 03200 LC Adapter, 60-Degree Angle GVIS GAC 115B 02050 2.5mm APC Adapter for GVIS GAC 116B 02051 1.25mm APC Adapter for GVIS TRUSTED SINCE 324 www.greenlee.com 1862

= NEW PRODUCT = REPLACEMENT PART = ACCESSORY B = BARE TOOL SensoLITE® Light Detector • Detects visible and invisible light wavelengths (630 nm to 1600 nm) • Saves time and eliminates guesswork • Simple, durable, and easy to use • Works with bare and connectorized fibers • Accepts all fiber and most connector types • Wide sensitivity range: from -55 dBm to +25 dBm • Presence of light indicated by an audible signal and an illuminated front panel LED • Unique design permits testing in bright ambient light conditions • Long battery life—up to one year of normal use 510XL • Low battery indicator • Replaceable light blocking curtain SPECIFICATIONS OPTICAL Center Wavelength 630 nm to 1600 nm Detector PIN-type germanium Optical Interface Direct connection to bare or connectorized fibers; No spe- Promotes workplace safety – can help prevent accidental eye exposure cialized adapters required to hazardous laser radiation when used as directed Sensitivity SPECIFICATIONS 630nm < -40 dBm 850nm < -55 dBm ENVIRONMENTAL 1300nm < -55 dBm Operating temperature -15° C to +55° C 1550nm < -55 dBm Storage temperature -25° C to +70° C Output Indicators Humidity 0 to 90% RH, non-condensing Light > -40dBm Amber LED/audible signal Dimensions 14.2 x 4.3 x 3.3 cm (5.6 x 1.7 x 1.3 in.) Battery test Green LED Weight 120 g (4.2 oz.) with batteries Power Requirements Two AA size 1.5V batteries (approx. 100 hours continuous operation) CAT. NO. UPC NO. DESCRIPTION 510XL 00024 Visual Fault Finder www.greenlee.com 325

COMMUNICATIONS FIBER PRODUCTS Fiber Optic Power Meter • Easy to use - three buttons control all functions • Loss measurements in (dB); power measurements in (dBm). • 0.01 dB measurement resolution • Multi-wavelength storage - store and recall reference power levels for faster, more efficient measurements • Snap-On connector interface adapts to FC, SC and ST connectors. • Long battery life • User selectable auto shut-off • Rugged and splash-proof • Economically priced CAT. NO. UPC NO. DESCRIPTION 560XL 84485 Fiber Optic Power Meter T1062 60575 SC/PC UCI Adapter T1020 60576 FC/PC SOC Adapter T1030 60577 ST/PC SOC Adapter 560XL SPECIFICATIONS SPECIFICATIONS OPTICAL Calibration Wavelengths 850 nm, 1300 nm, Environmental 1310 nm and 1550 nm Operating temperature -15° C to +55° C Power Range +3 dBm to -60 dBm Storage temperature -35° C to +70° C Accuracy ± 0.25 dB Humidity 0 to 95% non-condensing Linearity Dimensions 7.2 x 14.2 x 3.5 cm (2.8 x 5.6 x 1.4 in.) +3dBm to -3dBm ±0.5 dB -3dBm to -50dBm ±0.5 dB Weight 241 g (8.5 oz.) -50dBm to -60dBm ±0.5 dB CE EN61010; EN50081-1: 1992; EN55011, Resolution 0.01 dB Group 1, Class A EN50082-1: 1992 IEC 801-2, -3, -4 Power Requirements Two AA size 1.5V batteries (approx. 100 hours continuous operation) Connector interface FC, SC or ST SOC Adapter Silicon Fiber Optic Power Meter • Easy to use - three buttons control all functions • Loss measurements in (dB); power measurements in (dBm) • 0.01 dB measurement resolution • Snap on connector interface adapts to FC, SC and ST connectors. Contact Greenlee for other available adapters. • Long battery life • User selectable auto shut-off • Rugged and splash-proof • Economically priced CAT. NO. UPC NO. DESCRIPTION 567XL 00025 XL fiberTOOLS® - Silicon Fiber Optic Power Meter 567XL SPECIFICATIONS OPTICAL Detector Type 3 x 3.5 mm Silicon SPECIFICATIONS Calibration Wavelengths 635 nm, 780 nm, and 850 nm Environmental Power Range +3 dBm to -60 dBm Operating temperature -15° C to +55° C Accuracy ±0.25 dB Storage temperature -35° C to +70° C Linearity at: +3 dBm to -3 dBm ±0.5 db Humidity 0 to 95% non-condensing -3 dBm to -50 dBm ±0.05 db Dimensions 7.2 x 14.2 x 3.5 cm (2.8 x 5.6 x 1.4 in.) -50 dBm to -60 dBm ±0.5 db Weight 241 g (8.5 oz.) Resolution 0.01 dB CE EN61010; EN50081-1: 1992; EN55011, Power Requirements Two AA size 1.5V batteries Group 1, Class A EN50082-1: (approx. 100 hours continuous operation) 1992 IEC 801-2, -3, -4 Connector Interface SOC TRUSTED SINCE 326 www.greenlee.com 1862

= NEW PRODUCT = REPLACEMENT PART = ACCESSORY B = BARE TOOL High Intensity Fiber Optic Power Meter • Easy to use - three buttons control all functions • Multi-Wavelength Storage: Store and recall reference power levels for faster, more efficient measurements • 0.01dB measurement resolution • Loss measurements in (dB); power measurements in (dBm) • Snap on connector interface adapts to FC, SC and ST connectors; Contact Greenlee for other available adapters • Long battery life 568XL • User selectable auto shut-off • Rugged and splash-proof • Economically priced CAT. NO. UPC NO. DESCRIPTION 568XL 00026 XL fiberTOOLS® - High Intensity Optic Power Meter SPECIFICATIONS OPTICAL Detector Type 2 mm indium-arsenide (InGaAs) SPECIFICATIONS Calibration Wavelengths 980 nm, 1310 nm, and 1550 nm Power Range +25 to -30 dBm (1310 nm and 1550 nm); Environmental +25 to -27 dBm measurement range at 980 nm. To avoid thermal damage, limit exsposure high Operating temperature -15° C to +55° C power (greater than +23 dBm) to less than Storage temperature -35° C to +70° C 30 minutes.; +25 to -27 dBm (980 nm only) Humidity 0 to 95% non-condensing Linearity at: +25 dBm to +22 dBm ±1.0 dB Dimensions 7.2 x 14.2 x 3.5 cm (2.8 x 5.6 x 1.4 in.) (1310nm and 1550nm) +22 dBm to +18 dBm ±0.5 dB +18 dBm to +10 dBm ±0.2 dB Weight 241 g (8.5 oz.) +10 dBm to -30 dBm ±0.05 dB CE EN61010; EN50081-1: 1992; EN55011, Absolute Accuracy ±0.25dB at calibration conditions Group 1, Class A EN50082-1: 1992 IEC 801-2, -3, -4 Wavelength Dependence 975 to 985 nm 0.025 dB/nm 1270 to 1330 nm 0.0033 dB/nm 1500 to 1625 nm 0.0016 dB/nm Polarization Dependence <0.1 dB Resolution ±0.01 dB Power Requirements Two AA size 1.5V batteries (approx. 100 hours continuous operation) Connector Interface SOC www.greenlee.com 327

COMMUNICATIONS FIBER PRODUCTS 850/1300 nm LED Source • 850/1300 nm wavelengths • Stable calibrated output • Easy to use • Continuous wave and modulated output • Fixed connector interface FC, SC or ST • Long battery life - approx. 80 hours • User selectable auto shut-off • Rugged and splash-proof • Economically priced CAT. NO. UPC NO. DESCRIPTION 570XL-FC 84486 850/1300 nm LED source w/FC interface 570XL-SC 84487 850/1300 nm LED source w/SC interface 570XL-FC 570XL-ST 84488 850/1300 nm LED source w/ST interface SPECIFICATIONS OPTICAL Center Wavelengths 850 nm 1300 nm SPECIFICATIONS Range (typical) 840 nm to 880 nm 1270 nm to 1345 nm ENVIRONMENTAL Max. spectral width 60 nm 150 nm Operating temperature -15° C to +55° C Stability (1 hour) ±0.05 dB ±0.05 dB Storage temperature -35° C to +70° C Typical power output Humidity 0 to 95% non-condensing 100/140um -20 dBm -20 dBm Dimensions 7.2 x 14.2 x 3.5 cm (2.8 x 5.6 x 1.4 in.) 62.5/125um -21 dBm -20 dBm Weight 241 g (8.5 oz.) 50/125um -121dBm -21 dBm CE EN61010; EN50081-1: 1992; EN55011, Modulation frequency 270 kHz, 1 kHz and 2 kHz 270 kHz, 1 kHz and 2 kHz Group 1, Class A EN50082-1: Power Requirements Two AA size 1.5V batteries Two AA size 1.5V batteries 1992 IEC 801-2, -3, -4 (approx. 40 hours continuous operation) Connector interface FC, SC or ST FC, SC or ST 650 nm LED Source for Large Core Plastic and Glass Fiber • 650 nm wavelength • Stable calibrated output • Easy to use • Continuous wave and modulated output • ST connector interface • Long battery life - approx. 24 hours • User selectable auto shut-off • Rugged and splash-proof • Economically priced CAT. NO. UPC NO. DESCRIPTION 573XL-ST 00023 650NM LED source w/ST interface 573XL-UNIV 00598 650NM LED source w/UCI interface 573XL-ST SPECIFICATIONS OPTICAL SPECIFICATIONS Center Wavelength 650 nm Range (Typical) 630 nm to 670 nm ENVIRONMENTAL Max. Spectral Width (FWHM) 40 nm Operating temperature -15° C to +55° C Stability (1 hour) ±0.05 dB Storage temperature -35° C to +70° C Power Output into -15 dBm ±0.5 dB Humidity 0 to 95% non-condensing MM 200/300 SI Fiber Dimensions 7.2 x 14.2 x 3.5 cm (2.8 x 5.6 x 1.4 in.) Modular Frequencies 270 kHz, 1 kHz and 2 kHz ±0.5 dB Weight 241 g (8.5 oz.) Power Requirements Two AA size 1.5V batteries CE EN61010; EN50081-1: 1992; EN55011, (approx. 24 hours continuous operation) Group 1, Class A EN50082-1: Connector Interface ST 1992 IEC 801-2, -3, -4 TRUSTED SINCE 328 www.greenlee.com 1862

= NEW PRODUCT = REPLACEMENT PART = ACCESSORY B = BARE TOOL 850 nm LED Source with AS-100 Launch Condition using 100/140 Fiber • 850 nm wavelength • Stable calibrated output • Easy to use • Continuous wave and modulated output • Universal connector interface • Long battery life - approx. 24 hours • User selectable auto shut-off • Rugged and splash-proof • Economically priced CAT. NO. UPC NO. DESCRIPTION 577XL AS100 00029 850 nm LED source w/AS100 Launch APC-108 60572 FC/PC UCI Adapter ATS-108 60573 ST/PC UCI Adapter 577XL AS100 ASC-108 60574 SC/PC UCI Adapter SPECIFICATIONS OPTICAL SPECIFICATIONS Center Wavelength 850 nm ENVIRONMENTAL Range (Typical) 840 nm to 880 nm Operating temperature -15° C to +55° C Max. Spectral Width (FWHM) <55 nm Storage temperature -35° C to +70° C Stability (1 hour) ±0.05 dB Humidity 0 to 95% non-condensing Launch Profile AS100 Dimensions 7.2 x 14.2 x 3.5 cm (2.8 x 5.6 x 1.4 in.) Power Output into MM 100/140 -13 dBm ±0.5 dB Weight 241 g (8.5 oz.) GI fiber CE EN61010; EN50081-1: 1992; EN55011, Modular Frequencies 270 kHz, 1 kHz and 2 kHz ±5% Group 1, Class A EN50082-1: Power Requirements Two AA size 1.5V batteries 1992 IEC 801-2, -3, -4 (approx. 24 hours continuous operation) Connector Interface Universal connector interface, physical contact(UCI-PC) 1300 nm LED Source with M90 Launch Condition using 62.5/1.25 Fiber • 850 nm wavelength SPECIFICATIONS • Stable calibrated output • Easy to use ENVIRONMENTAL • Continuous wave and modulated output Operating temperature -15° C to +55° C • Universal connector interface Storage temperature -35° C to +70° C • Long battery life - approx. 24 hours Humidity 0 to 95% non-condensing • User selectable auto shut-off Dimensions 7.2 x 14.2 x 3.5 cm (2.8 x 5.6 x 1.4 in.) • Rugged and splash-proof Weight 241g (8.5 oz.) • Economically priced CE EN61010; EN50081-1: 1992; EN55011, CAT. NO. UPC NO. DESCRIPTION Group 1, Class A EN50082-1: 1992 IEC 801-2, -3, -4 578XL-M90 00753 LED Source 1300 NM, 62.5/1.25 Fiber APC-108 60572 FC/PC UCI Adapter SPECIFICATIONS ATS-108 60573 ST/PC UCI Adapter OPTICAL ASC-108 60574 SC/PC UCI Adapter Center Wavelength 1300 nm Range (Typical) 150 nm Max. Spectral Width (FWHM) <55 nm Stability (1 hour) ±0.05 dB Launch Profile M90 Power Output into MM 62.5/125 -20 dBm GI fiber Modular Frequencies 270 kHz, 1 kHz and 2 kHz ±5% Power Requirements Two AA size 1.5V batteries (approx. 24 hours continuous operation) Connector Interface Universal connector interface, physical contact(UCI-PC) www.greenlee.com 329

COMMUNICATIONS FIBER PRODUCTS 1310/1550 nm Laser Source • 1310/1550nm wavelengths • Stable calibrated output • Easy to use • Continuous wave and modulated output • Fixed connect interface FC, SC or ST • Long battery life - approx. 80 hours • User selectable auto shut-off • Rugged and splash-proof • Economically priced CAT. NO. UPC NO. DESCRIPTION 580XL-FC 84489 1310/1550nm Laser source w/FC interface 580XL-SC 84490 1310/1550nm Laser source w/SC interface 580XL-ST 84491 1310/1550nm Laser source w/ST interface 580XL-FC SPECIFICATIONS OPTICAL SPECIFICATIONS Center Wavelengths 1310 nm 1550 nm Range (typical) 1280 nm to 1340 nm 1520 nm to 1580 nm ENVIRONMENTAL Max. spectral width <5 nm <5 nm Operating temperature -15° C to +55° C Stability (1 hour) ±0.05 dB ±0.05 dB Storage temperature -35° C to +70° C Typical power output (9/125) Humidity 0 to 95% non-condensing Minimum -8 dBm -8 dBm Dimensions 7.2 x 14.2 x 3.5 cm (2.8 x 5.6 x 1.4 in.) Typical -7 dBm -7 dBm Weight 241 g (8.5 oz.) Modulation frequency 270 kHz, 1 kHz and 2 kHz 270 kHz, 1 kHz and 2 kHz CE EN61010; EN50081-1: 1992; EN55011, Power Requirements Two AA size 1.5V batteries Two AA size 1.5V batteries Group 1, Class A EN50082-1: (approx. 40 hours continuous operation) 1992 IEC 801-2, -3, -4 Connector interface FC, SC or ST FC, SC or ST CDRH Laser Class Class 1 Multimode Fiber Optic Test Set • Insertion loss test set for multimode fiber • 850/1300 nm loss measurements • Connector for FC, SC or ST • Rugged package design • Easy to use portable package • Economically priced SPECIFICATIONS 5670-FC INCLUDES: 560XL Optical Power Meter 570XL-FC 850/1300 nm LED Source w/FC Connector T1020 FC/PC SOC Adapter 914B Carrying Case 5670-SC INCLUDES: 560XL Optical Power Meter 570XL-SC 850/1300 nm LED Source w/SC Connector SC/PC SOC Adapter 5670-FL 914B Carrying Case 5670-ST INCLUDES: 560XL Optical Power Meter 570XL-ST 850/1300 nm LED Source w/ST Connector T1030 ST/PC SOC Adapter 914B Carrying Case CAT. NO. UPC NO. DESCRIPTION 5670-FC 84492 Multimode Fiber Optic Test Set w/FC interface 5670-SC 84493 Multimode Fiber Optic Test Set w/SC interface 5670-ST 84494 Multimode Fiber Optic Test Set w/ST interface TRUSTED SINCE 330 www.greenlee.com 1862

= NEW PRODUCT = REPLACEMENT PART = ACCESSORY B = BARE TOOL Singlemode Fiber Optic Test Set • Insertion loss test set for singlemode fiber • 1310/1550 nm loss measurements • Connector for FC, SC or ST • Rugged package design • Easy to use portable package • Economically priced KIT SPECIFICATIONS 5680-FC INCLUDES: 560XL Optical Power Meter 580XL-FC 1310/1550 nm Laser Source w/FC Connector T1020 FC/PC SOC Adapter 914B Carrying Case 5680-SC INCLUDES: 5680-FC 560XL Optical Power Meter 580XL-SC 1310/1550 nm Laser Source w/SC Connector T1062 SC/PC SOC Adapter 914B Carrying Case 5680-ST INCLUDES: CAT. NO. UPC NO. DESCRIPTION 560XL Optical Power Meter 5680-FC 84495 Singlemode Fiber Optic Test Set w/FC interface 580XL-ST 1310/1550 nm Laser Source w/ST Connector 5680-SC 84496 Singlemode Fiber Optic Test Set w/SC interface T1030 ST/PC SOC Adapter 5680-ST 84497 Singlemode Fiber Optic Test Set w/ST interface 914B Carrying Case Multimode and Singlemode Fiber Optic Test Set • Insertion loss test set for multimode and singlemode fiber • 850/1300 nm Loss measurements • 1310/1550 nm Loss measurements • Connector for FC, SC or ST • Rugged package design • Easy to use portable package • Economically priced KIT SPECIFICATIONS 5890-FC INCLUDES: 560XL Optical Power Meter 570XL-FC 850/1300 nm LED Source w/FC Connector 580XL-FC 1310/1550 nm Laser Source w/FC Connector T1020 FC/PC SOC Adapter 915B Carrying Case 5890-SC INCLUDES: 560XL Optical Power Meter 570XL-SC 850/1300 nm LED Source w/SC Connector 580XL-SC 1310/1550 nm Laser Source w/SC Connector 5890-FC T1062 SC/PC SOC Adapter 915B Carrying Case 5890-ST INCLUDES: 560XL Optical Power Meter 570XL-ST 850/1300 nm LED Source w/ST Connector 580XL-ST 1310/1550 nm Laser Source w/ST Connector T1030 ST/PC SOC Adapter 915B Carrying Case CAT. NO. UPC NO. DESCRIPTION 5890-FC 84498 Multimode and Singlemode Fiber Optic Test Set w/FC interface 5890-SC 84499 Multimode and Singlemode Fiber Optic Test Set w/SC interface 5890-ST 84500 Multimode and Singlemode Fiber Optic Test Set w/ST interface www.greenlee.com 331

COMMUNICATIONS FIBER PRODUCTS 525N-30 Smart Optical Loss Test Set • Automated dual cable testing • Optical return loss measurements • Dual wavelength insertion loss measurements • Multi-mode and Single-mode models feature user settable 525N-30-FC PASS/FAIL thresholds • Communications between units via messaging • Wide dynamic range optical power meter • Test record storage and data management software • Rugged outside plant instrument package • Universal connector interface CAT. NO. UPC NO. DESCRIPTION 525N-30-FC 00891 850/1300nm Smart Optical Loss Test Set - FC interface 525N-30-SC 00892 850/1300nm Smart Optical Loss Test Set - SC interface 525N-30-ST 00893 850/1300nm Smart Optical Loss Test Set - ST interface SPECIFICATIONS 525N-30-XX Instrument Type Singlemode Smart Loss Test Set Interface PC Connector Interface AUTOTEST Connector performs AUTOTEST Insertion Loss Test and Manual Return measurements Loss POWER METER Detector Type InGaAs Display Range +10 dBm to -70 dBm Calibrated Wavelengths 850, 980, 1300, 1310, 1550, 1480, 1625 nm Absolute Accuracy <±0.25 dB Resolution 0.01 dB Measurement Units dBm, dB SOURCE SPECIFICATIONS Center Wavelength 850 nm ±30 nm 1300 nm ±30 nm Spectral Width <170 <170 Output Power >-21 dBm >-21 dBm Output Stability <±0.10 dB/8 hrs <±0.10 dB/8 hrs AUTOTEST INSERTION LOSS SPECIFICATIONS Test Port Measurement Range 25 dB Calibrated Wavelengths 850, 1300 nm GENERAL DESCRIPTIONS Display Type Graphics Liquid Crystal with Backlight Fiber Type Singlemode 9/125 um Standard Adapter Type FC, SC, ST other adapter options available Laser Classification Class 1 CFR 1040 Operating Temperature 0° C to +50° C Storage Temperature -20° C to +60° C Relative Humidity 0 to 95% RH non-condensing Size 19.3 x 10.9 x 5.8 cm (7.6 x 4.3 x 2.3 in) Weight 1.0 kg (2.2 lbs) Power Internal rechargeable NiMH Battery Life >8 hours TRUSTED SINCE 332 www.greenlee.com 1862

= NEW PRODUCT = REPLACEMENT PART = ACCESSORY B = BARE TOOL 525N-60 Smart Optical Loss Test Set • Automated bi-directional testing • Optical return loss measurements • Dual wavelength insertion loss measurements • Multi-mode and single-mode models feature user settable PASS/FAIL thresholds • Communications between units via messaging • Wide dynamic range optical power meter • Test record storage and data management software • Rugged outside plant instrument package • Universal connector interface CAT. NO. UPC NO. DESCRIPTION 525N-60-ST 00896 1310/1550 nm Smart Optical Loss Test Set - PC Connectors 525N-60-FC 00894 1310/1550 nm Smart Optical Loss Test Set - PC Connectors 525N-60-SC 00895 1310/1550 nm Smart Optical Loss Test Set - PC Connectors 525N-60-ST SPECIFICATIONS 525N-60-XX Instrument Type Singlemode Smart Loss Test Set Interface PC Connector Interface AUTOTEST Connector performs AUTOTEST Insertion Loss Test and Manual Return measurements Loss POWER METER SPECIFICATIONS Detector Type InGaAs Display Range +10 dBm to -70 dBm Calibrated Wavelengths 850, 980, 1300, 1310, 1550, 1480, 1625 Absolute Accuracy ±0.25 dB Resolution 0.01 dB Measurement Units dBm, dB, W Adapter Type UCI-UPC flat polish adapter 9/125SM SOURCE SPECIFICATIONS Center Wavelength 1310 nm ±30 nm 1550 nm ±30 nm Spectral Width <5 <5 Output Power >-10 dBm >-10 dBm Output Stability ±0.15 dB ±0.15 dB 8 hours 8 hours AUTOTEST INSERTION LOSS SPECIFICATIONS Test Port Measurement Range 40 dB Calibrated Wavelengths 1310, 1550 nm RETURN LOSS SPECIFICATIONS Measurement Range 10 to 45 dB Accuracy .5 dB GENERAL DESCRIPTIONS Display Type Graphics Liquid Crystal with Backlight Fiber Type Singlemode 9/125 um Standard Adapter Type FC, SC, ST other adapter options available Laser Classification Class 1 CFR 1040 Operating Temperature 0° C to +50° C Storage Temperature -20° C to +60° C Relative Humidity 0 to 95% RH non-condensing Size 19.3 x 10.9 x 5.8 cm (7.6 x 4.3 x 2.3 in) Weight 1.0 kg (2.2 lbs) Power Internal rechargeable NiMH Battery Life >8 hours www.greenlee.com 333

COMMUNICATIONS FIBER PRODUCTS Connector Cleaning Systems • Special lint-free fabric-on-a-reel quickly cleans ferrule endfaces of dust, oil and other contaminants • Cleaning system is completely self-contained • No need for alcohol • A single cleaning reel can be used for over 400 ferrule cleanings • ReelCleaner™ can be used on all connector types including MTP and MT-RJ 948 CAT. NO. UPC NO. DESCRIPTION 948 60692 ReelCleaner™ Connector Cleaning System 948/2 10792 Reel Set, 2/Package 945/ESD/1 24053 Reel Set, 1/Package Adapter Cleaning Wands • Specially-created, lint-free materials clean hard-to-reach fiber optic interfaces, bulkhead adapters and ferrule alignment sleeves CAT. NO. UPC NO. DESCRIPTION 946 60571 2.5 mm Cleaning Wands, 10/Package 946 946/K 60689 2.5 mm Cleaning Wands, 200/Box 947 60690 1.25 mm Cleaning Wands, 10/Package 947/K 60691 1.25 mm Cleaning Wands, 200/Box TRUSTED SINCE 334 www.greenlee.com 1862

= NEW PRODUCT = REPLACEMENT PART = ACCESSORY B = BARE TOOL Optical Fiber Monitors OFM1020 • mm Resolution • Zero Deadzone • 90dB Return loss dynamic range • 850/1300 nm operation • Measure optical components, cables and sensors. • Monitor bend loss and fiber stress • Universal optical interface • Ruggedized for field deployment • AC/DC operation • Custom configurations available (fiber, outputs, wavelengths) OFM1020 OFM130 • mm Resolution • Zero Deadzone • 85dB Return loss dynamic range • 1310/1490/1550/1625 nm operation • Measure optical components, cables and sensors • Analyze optical amplifiers • Monitor bend loss and fiber stress • Custom configurations available (fiber, outputs, wavelengths) CAT. NO. UPC NO. DESCRIPTION Please consult with a customer service representative OFM130 for ordering details. (800) 642-2155 SPECIFICATIONS Fiber Type OFM1020 OFM130 Distance Range 0-20 km (65,000 ft.) Accuracy 0.02% + 2.5cm (1") Single Point Resolution 5 mm (0.2") Two Point Resolution 10 cm (4") Deadzone Event 12 cm typical (5") Attenuation 38 cm typical (15") Return Loss Dynamic Range 90dB Accuracy ±1.0dB Insertion loss, fresnel Dynamic Range 40dB Accuracy ±0.3dB Insertion loss, rayleigh Dynamic Range 20dB Accuracy ±0.02 dB Wavelength Accuracy 40 nm Spectral Width 20 nm Mechanical Size 36 cm x 48 cm x 20 cm 35 cm x 39 cm x 20 cm (14.2"x18.9"x7.9") (13.8"x15.3"x7.9") Weight 11 kg (24 lb.) 9.5 kg (21 lb.) Power AC 110/220V, 60/400Hz DC 24V n/a www.greenlee.com 335

COMMUNICATIONS FIBER PRODUCTS Fiber Optic Instrument Adapters – SOC and UCI • Our SOC and UCI adapters provide direct connectivity for • SOC adapters are compatible with both PC and Angled APC Tempo fiberTOOLS® to a wide range of industry-standard fiber physical contact interfaces optic connectors • UCI adapters feature durable phosphor bronze alignment sleeve • Adapter design ensures maximum accuracy and repeatability • SOC (Snap-On Connector) adapter is used on all power meters when performing critical measurements on fiber optic systems and 250 “B” series LED Sources • Easy to clean and use • UCI (Universal Connector Interface) adapter is used on all 250/260 • Single-mode and multimode compatible “A” Series Sources and 330 Series Variable Optical Attenuators Fiber Optic Instrument Adapters – SOC and UCI CONNECTOR TYPE SOC ADAPTER UCI ADAPTER DESCRIPTION CAT. NO. UPC NO. CAT. NO. UPC NO. 1.25 mm Quick-Connect Universal Adapter T1026 60588 Use Hybrid Cable Only * (LC, MU, etc.) 2.5 mm SOC Quick-Connect Adapter T1025 60587 AU-250 60703 (E2000, FC, SC, ST, etc.) E-2000 T10E2 60599 AE2-10 60698 FC T1020 60576 APC-108 60572 HMS-10/HP T1040 60590 AHP-10 60699 LC T10LC 60600 Use Hybrid Cable * or FoPro®_x MIL-T-29504/4 & /5 Termini T1038 60589 Use Hybrid Cable * or FoPro®_x MT-RJ T13A2 60605 Use Hybrid Cable Only * SC T1062 60575 ASC-108 60574 SMA 905/906 T1087 60596 ASM-90 60702 ST T1030 60577 ATS-108 60573 TOSLINK – Simplex T10TB 60602 Use Hybrid Cable Only * Versatile Link – V/Z PIN T10ZP 60604 Use Hybrid Cable Only* x FoPro ferrule options include 2.5 mm, 1.57 mm (MIL-style 16AWG optical contacts) and 1.25 mm. 90SOC (60687) * When using a Hybrid Adapter Cable, the instrument UCI adapter and one end of the Hybrid SOC adapter tool for Adapter Cable should be a commonly available connector type. (i.e. FC, SC or ST) easy installation and removal of SOC adapters from instrument interfaces. (Product shown may vary) TRUSTED SINCE 336 www.greenlee.com 1862

= NEW PRODUCT = REPLACEMENT PART = ACCESSORY B = BARE TOOL FIBER OPTIC HAND TOOLS ProGrip 5-in-1 Fiber Optic Stripper • Precision ground stripping cavities for: – 2.0 - 2.4 mm outer jacket – 2.0 - 3.0 mm loose tube – 2.8 - 3.0 mm outer jacket – 900 µm buffer insulation – 900/125 µm and 250/125 µm buffer/acrylate • Factory calibrated PA1171 CAT. NO. DESCRIPTION PA1171 ProGrip 5-in-1 Fiber Optic Stripper ProGrip 3-in-1 Fiber Optic Stripper • Precision ground stripping cavities for: – 2.0 mm outer jacket – 900 µm buffer insulation – 250 µm buffer/acrylate • Factory calibrated CAT. NO. DESCRIPTION PA1177 PA1177 ProGrip 3-in-1 Fiber Optic Stripper Economy Kevlar® Cutter • Cut protective Kevlar strands in fiber optic cable • Hard-chromed serrated edges to easily cut through Kevlar • Comfortable handles with large finger openings • 7.75" (197 mm) long CAT. NO. DESCRIPTION WEIGHT PA1511 Economy Kevlar Cutter 2 oz Kevlar is a registered trademark of E.I. Dupont, Inc. PA1511 Economy Fiber Optic Stripper • Pre-calibrated and factory set to ensure precision • Bright orange rubber dipped handles • Lock closure for safety and transport PA1162 • Tool is for stripping 2.0-3.0 mm Fiber Optic cable, micron-cladded core • 5" (127 mm) long SPECIFICATIONS Weight 3 oz. (86 g) Length 5" (127 mm) CAT. NO. DESCRIPTION WEIGHT PA1162 Economy Fiber Optic Stripper 3 oz www.greenlee.com 337

COMMUNICATIONS FIBER PRODUCTS Pocket Cable Stripper • Specifically designed for stripping power and telecommunications cables from 3/4" to 1-1/2" in diameter (19 mm to 40 mm) • Strips solid conductor, stranded conductor and multiple conductor cables • Easy blade depth adjustment • Blade rotates for circular, longitudinal and spiral cuts. 1903 CAT. NO. UPC NO. DESCRIPTION 1903 12679 Cable Stripping Tool 13544 13544 Replacement Blade (2 per package) 13545 13545 Replacement Small Hook 13546 13546 Replacement Large Hook Fiber Optic Scribe • Pen-type scribe with screw-in non-reversible carbide tip • Wedge shaped tip • Pocket-clip • Stainless steel barrel • 5.25" (197 mm) CAT. NO. DESCRIPTION WEIGHT PA1922-1 Fiber Optic Scribe 2 oz PA1922-1 Fiber Optic Polishing Pucks • Manufactured from aluminum with tungsten coating • Cleaner than conventional plastic pucks because less debris left behind • Double the lifetime of conventional plastic pucks • Length: 7.75" (197 mm) CAT. NO. DESCRIPTION WEIGHT PA1920-1 SC, ST, FC Polishing Puck 2 oz PA1926-1 LC Polishing Puck 2 oz PA1920-1 TRUSTED SINCE 338 www.greenlee.com 1862

= NEW PRODUCT = REPLACEMENT PART = ACCESSORY B = BARE TOOL FIBER OPTIC KITS Ultimate Fiber Tool Kit This Ultimate Kit contains all the slitters, strippers, and Kevlar® cutters you will need to start your fiber optic terminations. Also included is the premium 1600 Series Crimper with three interchangeable dies. The Ultimate Tool Bag also has plenty of room for you to add your consumables PA4924 CAT. NO. DESCRIPTION WEIGHT PA4924 Ultimate Fiber Tool Kit 5.65 lbs ULTIMATE FIBER TOOL KIT INCLUDES PA1511 Kevlar® Cutter PA1171 ProGrip 5-in-1 Fiber Optic Stripper PA1162 Economy Fiber Optic Stripper PA1161 Adjustable Jacket Stripper PA1820 AM 25 Slitter PA1821 AM 35 Slitter PA1258 LC CST- Mini Stripper PA1600 1600 Series Crimp Frame PA2044 STII Type Die Set PA2664 SMA/SMB/FC/BICONIC Die Set PA1922-1 Fiber Optic Scribe PA1920-1 SC/ST/FC Polishing Puck PA1926-1 LC Polishing Puck N/A Plano® Tackle Box PA4923 Ultimate Tool Bag Kevlar is a registered trademark of E.I. Dupont, Inc. FiberReady Tool Kit This kit contains an assortment of cable sliters, strippers and Kevlar® cutters to prep fiber optic cable along with our 1600 Series premium crimper with interchangeable dies CAT. NO. DESCRIPTION WEIGHT PA906001 FiberReady Tool Kit 3.1 lbs PA906001 FIBERREADY TOOL KIT INCLUDES PA1511 Kevlar® Cutter PA1171 ProGrip 5-in-1 Fiber Optic Stripper PA1822 Universal Cable Stripper PA1600 1600 Series Crimp Frame PA2044 STII Type Die Set PA2664 SMA/SMB/FC/BICONIC Die Set N/A Zippered Portfolio Case with Handles Kevlar is a registered trademark of E.I. Dupont, Inc. www.greenlee.com 339

COMMUNICATIONS COMMUNICATIONS KITS GripPack Quick-Release Tool Holster • Easy-on, easy off with new quick-release belt clip • Belt clip swivels so the holster moves with you and the tools stay out of your way • Form fitted PVC material ensures that tools don’t fall out - even if you drop your kit or they are upside down • Molded specifically to hold the following Greenlee Communications Tools: Data SureStrip® UTP/STP & flat satin phone cutter/stripper, Datacomm scissors with serrated blades & ergonomic handles, Punchdown tool - either the ergonomic SurePunch Pro or the original SurePunch PDT®, Mini- MagLite® or SurePunch Pro detachable LED, and a Sharpie® marker CAT. NO. DESCRIPTION PA4942 PA4940 GripPack Quick-Release Tool Holster PA4941 GripPack SurePunch Pro Technician's Kit PA4942 GripPack SurePunch Pro Installer's Kit PA4943 GripPack SurePunch Technician's Kit PA4946 GripPack UTP Essentials PA4940-31 Replacement Belt Clip Grip Pack Kits DESCRIPTION MODEL PA4941 PA4942 PA4943 PA4946 GripPack Tool Holster PA4940 ✓ ✓ ✓ Data SureStrip® UTP/STP & flat satin cutter/stripper PA1116 ✓ ✓ ✓ ✓ Reversible 110/66 blade PA4571 ✓ ✓ ✓ ✓ SurePunch Pro PDT punchdown tool handle PA3589 ✓ ✓ SurePunch PDT® punchdown tool handle PA3570 ✓ ✓ SurePunch Pro detachable LED light & batteries PA4599 ✓ ✓ MagLite® with 2 AA batteries N/A ✓ ✓ Black Sharpie® pen N/A ✓ ✓ Pro COAX Tool Kit Designed for the professional CATV cable installer. Offers the convenience 46601 in having six essential tools needed for coaxial repair and installation with a unique Grip Pack Pouch CAT. NO. UPS NO. DESCRIPTION 46601 01292 Pro COAX Tool Kit 46601 PRO COAX TOOL KIT INCLUDES 0251-08D 8" Diagonal Cutting Pliers, Dipped Grip 45591 RG59/6/6Q, RG7/11 Coaxial Cable Stripper PA70020 RG59/6/6Q, RG7/11 Coaxial Cable Crimper 0153-42C 6-in-1 Multi-Tool (Screwdriver/Nut Driver Tool) 0354-14 Combo Ratcheting Closed and Open Ended 7/16" Wrench FL2AAAP LED Water Resistant Penlight PA5000 Custom Grip Pack Pouch with Belt Clip TRUSTED SINCE 340 wwwwww..ggrreeeennlleeee..ccoomm 1862

= NEW PRODUCT = REPLACEMENT PART = ACCESSORY B = BARE TOOL Ultimate Technician Kit CAT. NO. DESCRIPTION WEIGHT PA4932 Ultimate Technician Kit 7.2 lbs PA4932 ULTIMATE TECHNICIAN KIT INCLUDES PA1179 KT8 round cable cutter PA1116 Data SureStrip® UTP/STP & flat satin cutter/stripper PA1257 LC-CST CATV “F” coax stripper PA1923 Untwist tool PA1927 CATV “F” flaring & attachment tool - RG6/RG6 QS PA1559 SealTite® Pro compression crimper PA3589 SurePunch Pro punchdown tool PA4599 SurePunch Pro detachable LED light PA4572 110 blade PA4591 Double 110 blade PA4573 66 blade PA4574 BIX blade PA4575 Krone LSA blade PA1543 LAN ProNavigator® tester & remote PA4932 PA1573 Telephone Test Set & LAN Cable-Check™ PA1902 RJ45 adapter PA1900 Can wrench N/A (10) RJ22 handset plugs PA9520 (10) RJ11/12 plugs, stranded, flat cable PA9546 (10) RJ45 plugs, Cat5e, solid, round cable PA9644 (10) CATV “F” RG6/RG6 QS connectors PA901074 (2) BNC-to-CATV “F” adapters PA4923 Ultimate Tool Bag N/A Plano® plastic tackle box Ultimate Premise Service Kit This kit is designed for today’s on-the-go LAN professional. It provides all the tools and testers you need to maintain your data, voice and video networks all in our Ultimate Tool Bag that’s always ready CAT. NO. DESCRIPTION WEIGHT PA4933 Ultimate Premise Service Kit 6.1 lbs PA4932 ULTIMATE PREMISE SERVICE KIT INCLUDES PA1179 KT8 round cable cutter PA1116 Data SureStrip® UTP/STP & flat satin cutter/stripper PA1257 LC-CST CATV “F” coax stripper PA8000 CrimpALL® crimp frame with EZI-CHANGE™ thumb screws PA3589 SurePunch Pro punchdown tool PA4572 110 blade PA4573 66 blade PA1543 LAN ProNavigator® tester & remote PA4933 PA1573 Telephone Test Set & LAN Cable-Check™ PA1902 RJ45 adapter PA901074 (2) BNC-to-CATV “F” adapters PA4923 Ultimate Tool Bag N/A Plano® plastic tackle box Die Sets: PA2062 Die Sets: RJ11/12 WE/SS-style PA2687 Die Sets: RJ45 WE/SS-style & RG6/RG6 QS CATV “F” wwwwww..ggrreeeennlleeee..ccoomm 341

COMMUNICATIONS COMMUNICATIONS KITS Ultimate Coax Compression Tool Kit This kit is for installing home theaters, HDTV, satellite and digital cable TV systems. It contains everything needed for new home construction or retrofitting sophisticated A/V solutions CAT. NO. DESCRIPTION WEIGHT PA4939 Ultimate Coax Compression Tool Kit 8.25 lbs PA4939 ULTIMATE COAX COMPRESSION TOOL PRO KIT INCLUDES PA1821 AM 35 Slitter PA1179 KT8 Cutter PA1119 UTP/Coax Cutter/Stripper PA4939 PA1280 CST Pro Coax tool PA2280 CST Pro GRN Cassette PA2281 CST Pro OG – Kings & Amphenol BNC PA2282 CST Pro BK – ADC, Amphenol HDTV BNC PA2283 CST Pro BL – CATV “F” PA2284 CST Pro Rollers PA1927 CATV “F” Flaring & Insertion Tool PA1557 SealTite® Pro Compression Crimper PA1907 BNC Extraction Tool PA1908 CATV “F” Extraction Tool PA1594 LAN & A/V Cable-Check™ Tester N/A Plano® Tackle Box PA4923 Ultimate Tool Bag PA9645 (50) SealTite™ CATV “F” – RG59 PA9720 (10) SealTite™ RCA – RGX PA9730 (10) SealTite™ BNC – RGX PA906002 (30) Connector & Adapter Assortment Pack Ultimate DataReady® Pro Kit If you’re an installer or technician needing a data cable tool kit solution, this is it. It includes all the tools you need for Cat5, Cat5e and Cat6 installation or maintenance in our rugged Ultimate Tool Bag CAT. NO. DESCRIPTION WEIGHT PA4934 Ultimate DataReady® Pro Kit 5.15 lbs PA4932 ULTIMATE DATAREADY® PRO KIT INCLUDES PA1116 Data SureStrip® UTP/STP & flat satin cutter/stripper PA4934 PA1923 Untwist tool PA8000 CrimpALL® crimp frame with EZI-CHANGE™ thumb screws PA3589 SurePunch Pro punchdown tool PA4599 SurePunch Pro detachable LED light PA4571 110/ 66 blade PA4591 Double 110 blade PA1543 LAN ProNavigator® tester & remote PA4923 Ultimate Tool Bag N/A Plano® plastic tackle box Die Sets: PA2061 RJ45 WE/SS-style PA2062 RJ11/12 WE/SS-style PA2063 RJ22 handset PA2064 RJ45 AMP-style PA2067 RJ11 DEC-MMJ TRUSTED SINCE 342 www.greenlee.com 1862

= NEW PRODUCT = REPLACEMENT PART = ACCESSORY B = BARE TOOL Ultimate Data/Voice Pro Kit This complete kit is for data and voice installation and maintenance stored in the new versatile Ultimate Tool Bag CAT. NO. DESCRIPTION WEIGHT PA4935 Ultimate Data/Voice Pro Kit 4.5 lbs PA4935 ULTIMATE DATA/VOICE PRO KIT INCLUDES PA4935 PA1116 Data SureStrip® UTP/STP & flat satin cutter/stripper PA1923 Untwist tool PA1561 All-in-One Phone/Data tool PA3589 SurePunch Pro punchdown tool PA4572 110 blade PA4573 66 blade PA4591 Double 110 blade PA1573 Telephone Test Set & LAN Cable-Check™ PA1900 Can wrench PA4923 Ultimate Tool Bag N/A Plano® plastic tackle box Ultimate Tool Bag • Main compartment features removable inner tote and three additional pockets • Removable inner tote with eight adjustable storage slots keeps smaller tools handy • Detachable shoulder strap with three anchor points to carry bag horizontally or vertically • Deep Velcro pockets holds large tools or test equipment • Plano® divided tackle box neatly stores dies, blades & connectors and fits into all outer pockets • Sturdy bottom prevents bag from flopping over when sitting upright CAT. NO. DESCRIPTION WEIGHT PA4923 Ultimate Tool Bag with Plano® tackle box 2.2 lbs PA4923 Tools and bits not included www.greenlee.com 343

COMMUNICATIONS COMMUNICATIONS KITS SealTite® Pro A/V Kit The SealTite® Pro A/V kit is all you need to make custom length digital and analog audio and component video cables using compression RCA, BNC and cable TV "F" connectors. CAT. NO. DESCRIPTION WEIGHT PA4915 SealTite® Pro A/V Kit 46 oz SEALTITE® PRO A/V KIT INCLUDES PA4915 PA1119 Combination UTP/Coax Data SureStrip® PA1559 SealTite Pro Compression Crimper N/A 2 sets of color bands for RCA & BNC Connectors 6 BONUS RG6/RG6 QS Compression Connectors PA9714 (2) RCA PA9715 (2) BNC PA9643 (2) Cable TV “F” SealTite® Pro Cable TV "F" Kit Tackle all of your compression crimping jobs with the complete SealTite® Pro Kit. Includes all the tools you need to prepare the cable and terminate any compression connector using RG59, RG6 or RG6 Quad shield cables PA4910 CAT. NO. DESCRIPTION WEIGHT PA4910 SealTite® Pro Kit 46 oz SEALTITE® PRO KIT INCLUDES PA1179 KT8 round cable cutter PA1257 LC CST CATV “F” coax stripper PA1917 RG6/RG6 Quad shield flaring tool PA1559 SealTite® Pro compression crimper N/A RG6/RG6 Quad SealTite® connectors (10) TRUSTED SINCE 344 www.greenlee.com 1862

= NEW PRODUCT = REPLACEMENT PART = ACCESSORY B = BARE TOOL CoaxReady™ Compression Tool Kit Adding to our CoaxReady™ solutions, this kit has everything you will need to terminate any manufacturers' cable TV "F", RCA or BNC compression connectors using RG6, RG6 Quad or RG59 cable sizes • 12 piece kit • Includes zippered Cordura® portfolio case PA906003 CAT. NO. DESCRIPTION WEIGHT PA906003 CoaxReady™ Compression Tool Kit 3.5 lbs COAXREADY™ COMPRESSION TOOL KIT INCLUDES PA1821 AM 35 Slitter PA1179 KT8 Cutter PA1119 Data & A/V UTP & Coax Cutter/Stripper PA1280 CST Pro Coax tool PA2280 CST Pro GRN 3-Level Strip Blade Cartridge PA2283 CST Pro OG 3-Level Strip Blade Cartridge PA2282 CST Pro BK 3-Level Strip Blade Cartridge PA2284 CST Pro Rollers PA1927 CATV “F” Flaring & Insertion Tool N/A Zippered Cordura® Portfolio Case CoaxReady™ Deluxe Kit Perfect for LAN/Ethernet or video & CATV installation. For a wide variety of coaxial connectors including mini-coax and HDTV applications, CoaxReady™ Deluxe combines our most popular tools for a complete coax solution in a handy zipper case • Kit also includes terminators and adapters PA901081 CAT. NO. DESCRIPTION WEIGHT PA901081 CoaxReady™ Deluxe Kit 3 lbs COAXREADY™ DELUXE KIT INCLUDES PA1179 KT8 round cable cutter PA1255 LC CST-58/59 coax stripper PA1302 1300 crimp tool frame with EZI-CHANGE™ thumb screws DIE SETS: PA2034 BNC/TNC - RG58/59/62AU PA2649 BNC/TNC - CATV “F” RG59/6/Belden 8281/1694A and 1505A PA2653 SMA/SMB/Mini 59 BNC & TNC/Mini-UHF CoaxReady™ Kit With this kit a technician is set to tackle most coaxial cabling challenges Perfect for the LAN/Ethernet or video installation installer. For a wide variety of coaxial connectors including mini-coax applications, CoaxReady™ combines our most popular tools with the new LC CST coax stripper in a handy zippered case PA901054 CAT. NO. DESCRIPTION WEIGHT PA901054 CoaxReady™ Kit 2.5 lbs COAXREADY™ KIT INCLUDES PA1179 KT8 round cable cutter PA1255 LC CST-58/59 coax stripper PA1302 1300 crimp tool frame with EZI-CHANGE™ thumb screws DIE SETS: PA2034 BNC/TNC - RG58/59/62AU PA2075 BNC/TNC - RG58/59/62AU RG6 Teflon/Plenum PA2653 SMA/SMB/Mini 59 BNC & TNC/Mini-UHF Teflon® is a registered trademark of Dupont www.greenlee.com 345

COMMUNICATIONS COMMUNICATIONS KITS Telco Technician Tool Kit CAT. NO. DESCRIPTION WEIGHT PA4938 Telco Technician Kit 7.6 lbs BROADCASTREADY® PRO KIT INCLUDES PA1116 Data SureStrip® UTP/STP Cutter/Stripper PA1933 Datacomm Scissors PA3570 SurePunch Pro Punchdown Tool PA4571 110/66 blade PA4599 SurePunch Pro Detachable LED Light N/A Mini-MagLite® N/A Sharpie® Black Marker PA4940 GripPack Quick Release PDT Holster PA4938 PA1561 All-in-One Phone/Data Crimp Tool PA9655 (50) RJ45 Cat5e Modular Plugs PA1902 RJ45 Adapter PA1903 RJ11 Adapter PA1573 Tone Probe Plus Cable-Check™ TM500 Butt Set N/A Plano® Tackle Box PA4923 Ultimate Tool Bag BroadcastReady® Kit The BroadcastReady™ Kit includes professional tools for cutting, stripping, crimping and testing coaxial cable connections for HDTV, video and RF communications. Protected by a padded, zipper case. Also includes a screwdriver to change out die sets CAT. NO. DESCRIPTION WEIGHT PA901083 BroadcastReady® Kit 3 lbs PA901083 BROADCASTREADY® PRO KIT INCLUDES PA1179 KT8 round cable cutter PA1280 CST Pro Coax tool PA2280 CST Pro GRN – common connectors PA2281 CST Pro OG – Kings & Amphenol 3-piece PA2282 CST Pro BK – ADC, Amphenol HDTV N/A Screwdriver to change dies PA1543 LAN ProNavigator® tester & remote PA1600 1600 Series crimp frame TRUSTED SINCE 346 www.greenlee.com 1862

= NEW PRODUCT = REPLACEMENT PART = ACCESSORY B = BARE TOOL DataComm Pro Starter Kit Max This kit is also a starter kit for datacomm professionals • 66 piece kit • Includes the complete solution for cutting, crimping, and terminating • All the tools included come in a compact zipper case CAT. NO. DESCRIPTION WEIGHT PA4908 DataComm Pro Starter Kit 1.8 lbs DATACOMM PRO STARTER KIT INCLUDES PA1116 Data SureStrip® UTP/STP Cutter/Stripper PA3570 SurePunch Pro Punchdown Tool PA4528 110 Reversible blade PA1561 All-in-One Phone/Data Crimp Tool PA9520 (10) RJ45 Cat5e Modular Plugs N/A Compact Zipper Case PA4908 DataReady™ Pro Kit A complete data cable installation kit providing everything to support the installer using commonly-available connectors, and punchdown termination blocks. All tools contained in a professional-quality, soft-sided zipper case with heavy-duty wrist strap PA901378 CAT. NO. DESCRIPTION WEIGHT PA901378 DataReady™ PRO Kit 4 lbs PA9013781 DataReady™ PRO Kit - Krone* 4 lbs DATAREADY™ PRO KITS INCLUDE PA1116 Data SureStrip® UTP/STP & flat satin cutter/stripper PA1923 Untwist Tool PA3589 SurePunch Pro punchdown tool PA4599 SurePunch Pro detachable LED light PA4591 Double 110 blade PA4571 110/ 66 blade** PA1543 LAN ProNavigator® UTP/STP continuity tester & remote PA8000 CrimpALL® crimp frame with EZI-CHANGE™ thumb screws DIE SETS: PA2061 RJ45 WE/SS-style PA2062 RJ11/12 WE/SS-style PA2063 RJ22 handset PA2064 DRJ45 AMP-style PA2067 RJ11 DEC-MMJ * Additional 110 blade included in PA9013781 Kit ** Replaced with Krone blade PA4575 (only with PA9013781 Kit) www.greenlee.com 347

COMMUNICATIONS COMMUNICATIONS KITS DataReady™ Kit The complete Category 5 datacomm tool set in a handy zipper case. Everything needed for a CAT-5 installation except the cable CAT. NO. DESCRIPTION WEIGHT PA901053 DataReady™ Kit 3 lbs PA9010531 DataReady™ Kit - AMP/Krone*† 3 lbs PA901053 DATEREADY™ KITS INCLUDE PA1116 Data SureStrip® UTP/STP & flat satin cutter/stripper PA1561 All-in-One Phone/Data tool* PA3570 SurePunch Impact Punchdown Tool PA4571 110/ 66 blade** PA1576 Data Link/ID and Cable-Check™ Tester N/A (20) RJ45 plugs, Cat5e, solid/stranded; flat/round cable N/A Zipper Case with Carrying Strap * WE/SS - style replaced with AMP - style #1557 ** Contains 110 & Krone blades PA4575 (only with PA9010531 Kit) † 68 spring- compression blades precisely adjust to the insulation. Premise Service Kit Our biggest data, voice, and coaxial LAN installation kit provides everything for twisted pair and coaxial cable installation. All tools contained in a professional blow-mold case complete with form-fitting foam CAT. NO. DESCRIPTION WEIGHT PA901039 Premise Service Kit 7.6 lbs PA9010391 Premise Service Kit - AMP/Krone* 7.6 lbs PA91039 PREMISE SERVICE KITS INCLUDE PA1179 KT8 round cable cutter PA1257 LC-CST CATV “F” coax stripper* PA1116 Data SureStrip® UTP/STP & flat satin cutter/stripper PA8000 CrimpALL® crimp frame with EZI-CHANGE™ thumb screws PA3589 SurePunch Pro punchdown tool PA4599 SurePunch Pro detachable LED light PA4573 66 blade*** PA1543 LAN ProNavigator® UTP/STP continuity tester & remote PA1573 Telephone Test Set & LAN Cable-Check™ PA1902 RJ45 8-way adapter DIE SETS: PA2062 RJ11/12 WE/SS-style** PA2687 RJ45 WE/SS-style & RG6/RG6 QS CATV “F”** * Replaced with LC CST-58/59 coax stripper PA1255 ** Replaced with RJ45 AMP-style & RG58/59 BNC/TNC dies PA2034, PA2064, PA2065 *** Replaced with BIX or Krone blade #PA4575 (only with PA9010391 Kit) TRUSTED SINCE 348 www.greenlee.com 1862

= NEW PRODUCT = REPLACEMENT PART = ACCESSORY B = BARE TOOL Network Tool Bundle This new bundle provides the perfect solution for the do-it- yourselfers that want to use professional tools or for small contractors just starting out installing networks. It includes everything you need but the cable to get the job done PA4909 CAT. NO. DESCRIPTION WEIGHT PA4909 Network Tool Bundle 18.4 oz PA4909 NETWORK TOOL BUNDLE INCLUDES PA1116 Data SureStrip® UTP/STP & flat satin cutter/stripper PA1561 All-in-One Phone & Data Tool PA3580 Non-impact 110 punchdown PA9546 10, RJ45 Cat5e plugs PA9520 10, RJ11 plugs www.greenlee.com 349

COMMUNICATIONS COMMUNICATIONS KITS Computer Service Kit • 3.6V cordless screwdriver, battery & charger • ESD wrist strap PA4370 • 30-watt soldering iron • Desolderer & soldering aid with pick & scraper/cutter tip • Needle nose pliers (2) • Angled-head lead cutter • Insulated tweezers • Component gripper & IC extractor • 10-piece driver socket set • 24-piece driver bit set: Torx, Hex, Phillips, Pozidrive, Slotted, and Square-Head • Socket adapter/extender & socket bit holder/extender CAT. NO. DESCRIPTION WEIGHT PA4370 Computer service kit 4.5 lbs Cordless Screwdriver & Socket Set • Adjustable torque up to 21.7in-lbs (2.4 N-m) • Includes 3.6V rechargeable battery • AC adapter/battery charger & bit holder included • Forward/reverse direction • One-hand operation • Handle swings easily from pistol to rod form • Includes 14-piece socket set: 6-12 mm; 3/16”-1/2” • Includes 26-piece driver bits: 3 slotted, 5 Torx, 3 Phillips, 3 Robertson, 12 hex • Accepts 1/4” bits PA4336 SPECIFICATIONS Weight 1.38 lbs. (.63 kg) Length 9.52" (242 mm) Power Requirements 3.6V NiCd battery Battery Life Approx. 600 cycles Charging Time 3-6 hours AC adapter input 120VAC 50-60Hz No-load Speed 170 rpm Motor 3.6VDC Max. torque 21.7 in-lbs. (2.4 N-m) Not for use on precision torque screw requirements. CAT. NO. DESCRIPTION PA4336 Cordless screwdriver & socket set PA6000 Replacement battery PA6001 Battery charger TRUSTED SINCE 350 www.greenlee.com 1862

= NEW PRODUCT = REPLACEMENT PART = ACCESSORY B = BARE TOOL Voice and Category 5 Data Termination Kit • Includes the tools and connectors necessary for installing a voice and data network • Durable Cordura® Plus zipper case protects and organizes tools and includes a see-through pouch for storing connectors • Outside pockets provide convenient storage of instruction manuals or worksite documents CAT. NO. UPC NO. DESCRIPTION 45469 45469 Voice and Category 5 Data Termination Kit Kit Includes: 45482 45482 Cable Cutter 45579 45579 Kwik Stripper® Twisted Pair Stripper 46023 46023 Punchdown Tool with 110 Blade 46022 46022 66 Style Punchdown Blade 45469 45575 45575 Telephone Ratchet Crimper for 4-, 6- and 8- Position Modular Plugs 45479 45479 Zipper Case Category 5 Data Termination and Test Kit • Includes the tools, connectors and testers necessary for installing a Cat 5 data network • Durable Cordura® Plus zipper case protects and organizes tools and includes a see-through pouch for storing connectors • Outside pockets provide convenient storage of instruction manuals or worksite documents CAT. NO. UPC NO. DESCRIPTION 45470 45470 Category 5 Data Termination and Test Kit Kit Includes: 45482 45482 Cable Cutter 45579 45579 Kwik Stripper® Twisted Pair Stripper 46023 46023 Punchdown Tool with 110 Blade 45575 45575 Telephone Ratchet Crimper for 4-, 6- and 8- Position Modular Plugs 45470 468T 60379 Modular Cable Tester Transmitter with Tone Generator 468R 60380 Modular Cable Tester Receiver 45485 45485 Zipper Case www.greenlee.com 351

COMMUNICATIONS HAND TOOLS Telecom Splice Crimpers • Side cutter for AWG 19-26 copper • Non-slip grips for precision control • Limited lifetime warranty • Crimp capacity – UR: AWG 19-26 – UY: AWG 22-26 – UG: AWG 19-26 PA1180 only • Stripping cavity for AWG 22 wire PA1180 • Needle-nose with knurled surface for gripping, wrapping and looping CAT. NO. DESCRIPTION PA1180 4-in-1 Telecom Splice Crimper PA1178 Telecom Splice Crimper PA1178 Round Cable Cutters • Cuts solid or stranded cable up to AWG 6 • Precise and effortless cuts • Round cutting form won't deform cables • Ideal for UTP and Coax, RG58, RG59 and RG6/6Q; RG7 and RG11 with PA1175 • Limited lifetime warranty PA1175 CAT. NO. DESCRIPTION PA1175 Contour Round Cable Cutter PA1179 Dual-Contour Round Cable Cutter PA1179 Cable Cutter, 8 AWG • Designed to cut solid, stranded wire up to 8 AWG (10 mm²) and multi- conductor cable up to 1/2" (12.7 mm) in diameter • Curved cutting blades ensure an easy cut • Economically priced • Cushioned-grip handle for comfortable use • Heat-treated for long life • Stamped and precision ground from high-carbon tool steel • Return spring • Locking latch • Rust-resistant black oxide finish CAT. NO. UPC NO. DESCRIPTION 45482 45482 Cable Cutter 45482 TRUSTED SINCE 352 wwwwww..ggrreeeennlleeee..ccoomm 1862

= NEW PRODUCT = REPLACEMENT PART = ACCESSORY B = BARE TOOL Cable Splicer’s Knife and Splicer's Snips • Cuts cable, telephone wire and strips insulation • Tough, tempered steel knife blade holds its edge longer • Full-sized knife handle provides greater comfort PT-K01A • Knife has a short, coping-type blade made of the finest cutlery steel • Scissors have an upper blade with two stripping notches to strip most insulations from 19-24 AWG. CAT. NO. UPC NO. DESCRIPTION PT-K01A 12997 Scissors and Knife Kit in Pouch DataComm Snips, Electrician's Snips • Cuts, strips and trims data and phone cables • Ergonomic design nests in hand for comfort and added cutting power • One fully serrated blade for clean cuts • “V” stripping notches for 19 and 23 AWG wire • Manufactured from high-carbon steel, chrome over nickel plate CAT. NO. UPC NO. DESCRIPTION PT-T03 PT-T03 89195 Snips Pro Stainless Steel Wire Strippers / Cutters / Crimpers • Cutlery grade stainless steel prevents wear and corrosion to provide 5X longer life • Pliers grab, form and bend wires • Precision ground strippers engineered for clean, easy insulation removal • Bolt Threaders clean threads after shearing • Comfort Grips are double molded, lightweight and easy to grab • Professional, multi-function tool includes a crimper, looper, non-obstructive lock mechanism, spring return, and high grade shears • Note: this is not an insulated tool • Lifetime warranty 1955-SS SOLID STRANDED BOLT CAT. NO. UPC NO. DESCRIPTION STRIP STRIP SHEAR CRIMP 1950-SS 02241 Pro Stainless Wire Stripper / Cutter / Crimper 10-18 12-20 6-32, 8-32 16-10 1955-SS 01361 Pro Stainless Wire Stripper / Cutter / Crimper (Curve) 10-18 12-20 6-32, 8-33 16-10 1956-SS 02242 Pro Stainless Wire Stripper / Cutter / Crimper (Curve) 6-14 8-16 6-32, 8-34 16-10 wwwwww..ggrreeeennlleeee..ccoomm 353

COMMUNICATIONS HAND TOOLS GripP-Strippers 10 & 20 • Head of tool and handles designed at optimum 22º angle to prevent awkward wrist bends • Precision grould blades ensure consistent stripping and cutting • Features screw cutter and wire loops embedded in frames • Built-in safety lock • Gripping jaws on front of tool for pulling wire • PA1117 will work on Romex household cable • Note: This is not an insulated tool CAP (AWG) CAT. NO. DESCRIPTION SOLID STRANDED PA1117 PA1117 GripP 10 cutter/stripper 10-22 12-24 PA1118 GripP 20 cutter/stripper 20-30 22-32 PA1123 Wire Stipper Bundle, includes both PA1117 and PA1118 Do not use on live circuits. stripax® Pro 6 • Strips heavy-duty and industrial insulations including THHN & THHW • Strips standard insulations including PVC, rubber and silicone. • Provides nick-free stripping of insulation with no damage to conductors • Built-in cutter provides a smooth, straight cut without distorting the conductor • Fine adjustment slider on top of tool lets you adjust to the insulation thickness PA2113 • Handles designed for comfort and require low hand force • Not for Teflon or Kapton hard insulations (use part number PA1115P mini-stripax Plus with a Teflon blade for these insulations) • Perfect companion for any of our wire ferrule crimpers • Strippers carry a lifetime warranty; blade warranty is one year for defects only • Lifetime limited warranty CAT. NO. DESCRIPTION WEIGHT PA1113 stripax® Pro 6 (28-10 AWG) (.08-6.0 mm2) 5.5 oz 68 spring- compression Adjustable wire stop to set PA2113 stripax® Pro 6 replacement stripping blade set blades on Pro 6† strip lengths Do not use on live circuits † 68 spring- compression blades precisely adjust to the insulation. Teflon® is a registered trademark of Dupont Cutter on bottom means less Round stripping blades on hand force required Pro 16 cut insulation cleanly TRUSTED SINCE 354 www.greenlee.com 1862

= NEW PRODUCT = REPLACEMENT PART = ACCESSORY B = BARE TOOL mini-stripax® plus • Strips flexible and solid conductors with PVC, Teflon, silicone and other special insulations • Strips multiple conductors and thin ribbon-cable conductors simultaneously • Adjustable wire stop and built-in wire cutter • 28-18 AWG (0.80-1.0 mm2) PVC blade included PA1115P • See replacement blades in next section • Limited lifetime warranty Strips PVC only. Do not use on live circuits. For Teflon, order blades separately see below in mini-stripax plus Replacement Blades Section. CAT. NO. DESCRIPTION WEIGHT PA1115P mini-stripax® plus (28-18 AWG) 4 oz Teflon® is a registered trademark of Dupont Adjustable Wire Stripper & Cutter • Economical wire stripping tool for multiple cables • Made of high carbon steel and heat treated for long life • Adjustable settings for wire sizes from 30-10 AWG Do not use on live circuits. CAT. NO. DESCRIPTION WEIGHT PA1161 Adjustable wire stripper & cutter (30-10 AWG) 3 oz PA1161 www.greenlee.com 355

COMMUNICATIONS HAND TOOLS Combo UTP/Coax SureStrip® • Professional all-in-one cutter/stripper for coaxial and twisted pair cables • Cuts and strips multiple cable types: – Coax: RG6, RG6 Quad and RG59 – Twisted Pair (UTP/STP): Cat6, Cat5e and Cat5 • Easy-to-use combination cutter/stripper • Adjustable stripping blade for UTP/STP; accommodates different insulation thicknesses without damaging conductors • Self-regulating cassette blade prevents nicks • Coax blade cassette is removable to adjust stripping depth of both blades with hex key included (Note: Hex key stores securely in bottom of tool) • Contoured finger grips for cutting power PA1119 CAT. NO. DESCRIPTION WEIGHT PA1119 Combo UTP/Coax SureStrip® 2.5 oz PA2119 Coax Blade Cassette — PA2120 UTP Cut/Strip Blade — Data SureStrip® • Small, compact tool that cuts and strips multiple cable types: – 4-, 6- and 8- conductor flat satin cables – 4-, 6- and 8- conductor UTP/STP data cables – 25- vpair UTP/STP data and telephone cables • Multi-conductor round bundled cables with a maximum diameter of .5” (12.7 mm) • 14-8 AWG (2.5-75mm2) wire • Nylon reinforced ABS plastic with stainless steel blade • Fully adjustable with simple thumb screw • Self-regulating to prevent nicking • Contoured finger grips for power cutting CAT. NO. DESCRIPTION WEIGHT PA1116 Data SureStrip® 2.5 oz PA1116 TRUSTED SINCE 356 www.greenlee.com 1862

= NEW PRODUCT = REPLACEMENT PART = ACCESSORY B = BARE TOOL CST vario Stripper • Most flexible coax stripping tool on the market • Easy to set up and adjust • Two- and three-level stripping • Minimum center-to-center strip length is 0.13” (3.2 mm) • Maximum total strip length is 0.67” (17 mm) • Adjustable blade positioning in 0.04” (1 mm) increments • Lifetime warranty on frame only PA3242 *Not recommended for use on LMR or Teflon cables. CAT. NO. DESCRIPTION PA3240 CST vario stripper PA3242 Replacement blade holder, blades & allen hex key Teflon® is a registered trademark of Dupont PA3240 CST Strippers • Fixed blade system that accommodates 0.1"-0.315" (2.5-8.0mm) cable diameters including RG58/59/62AU, RG6, RG6 Quad, RG174, Belden 1505A, 1855A and 8281 • Cam adjustment ensures precise and repeatable hold on cable • Memory blocks reduce set-up time and are easy to interchange and mark for various applications • Blades are two-sided for longer use • No cable jacket distortion during stripping process • Blade cassettes easy to change • Lifetime warranty on frame only CAT. NO. DESCRIPTION COMMON USES PA1240 CST Green - 3 Level (A=.279, B=.201) Common 2- & 3-piece PA2240 Green Blade Cassette only PA1243 CST Brown - 3 Level (A=.295, B=.137) PA2243 Brown Blade Cassette only PA1240 PA1247 CST Orange - 3 Level (A=.327, B=.146) Kings, Amphenol 3-piece PA2247 Orange Blade Cassette only PA1248 CST Black - 3 Level (A=.344, B=.094) ADC, Amphenol HDTV PA2248 Black Blade Cassette only PA1250 CST Frame only PA2245 CST Memory Cartridge only Y-block – inserts into tool to tighten up rollers for smaller cable sizes PA2245 PA2240 PA2247 PA2248 www.greenlee.com 357

COMMUNICATIONS HAND TOOLS CST Pro Coax Stripper • New patent-pending coax stripping system for precision & accuracy • Works with a wide range of cable diameters from .1" - .315” (2.5-8.0mm) including: RG58/59/62AU, RG6/6QS, RG174, Belden 1505A, 1855A & 8281 and mini-coax • Pre-set for standard 2- and 3- level strip lengths • Coax stripper designed for pros requiring precision, versatility & ease of use. • Reversible-rollers easily adjust for various cable sizes including mini-coax. • Dual roller mechanism perfectly centers cable & applies equal pressure to eliminate cable distortion • Quick-change pre-set blade cassettes • Cam adjustment ensures precise hold on cable • Fixed blade cassettes pre-set for standard 2- and 3- level strip lengths • Interchangeable blades reduce set-up time • Lifetime warranty on frame only PA1282 CAT. NO. DESCRIPTION COMMON USES PA1280 CST Pro Green 3-level (A=.279, B=.201) Common 2- & 3-piece PA2284 PA2280 Green Blade Cassette only Reversible Rollers PA1281 CST Pro Orange 3-level (A=.327, B=.146) Kings, Amphenol RFX 3-piece PA2281 Orange Blade Cassette only PA1282 CST Pro Black 3-level (A=.344, B=.094) ADC, Kings, Amphenol HDTV, Mini's PA2282 Black Blade Cassette only PA1283 CST Pro Blue 2-level (A=.250) Standard RG6/6QS & RG59, CATV "F", Mini's PA2283 Blue Blade Cassette only PA1285 CST Pro Frame only PA2284 CST Pro Rollers only PA2282 3 Level Blade Adjustment Screws LC CST Strippers • Self-regulating tension • Adjust cutting depth on each blade for varying cable thicknesses with the included hex key • Pre-set for common strip lengths • Blades adjust for strip dimensions other than our standard pre-set units* SPECIFICATIONS PRESET STRIP LENGTHS* CABLE USAGE LC CST-58/59 0.315” outer jacket RG58, RG59, RG62 AU & RG6 0.157” inner dielectric PA1255 LC CST-11 0.315” outer jacket RG8, RG11 & RG213 0.157” inner dielectric LC CST CATV “F” 0.236” outer jacket RG59, RG6 & RG6 QUAD CATV”F” (preset for RG6 CATV “F”) LC CST-Mini 0.344” outer jacket RG178, RG179, RG188, AT&T CAT. NO. DESCRIPTION 0.094” inner dielectric 735(A), NT735, Belden 1855A, PA1255 LC CST-58/59 – 2- & 3-Level, Adjustable Belden 8218, RG180, RG187, PA1256 LC CST-11 – 2- & 3--Level, Adjustable RG188A, RG405 and more PA1257 LC CST CATV "F" – 2-Level PA1258 LC CST-Mini PA2263 Replacement Blade *To adjust strip lengths simply change blade locations in the lower jaw to attain the following: .157” (4 mm), .236” (6 mm), .315” (8 mm), .394” (10 mm) and .472” (12 mm) Not recommended for use on LMR or Teflon cables. Teflon® is a registered trademark of Dupont TRUSTED SINCE 358 www.greenlee.com 1862

= NEW PRODUCT = REPLACEMENT PART = ACCESSORY B = BARE TOOL Kwik Stripper® Twisted Pair Stripper • No tool is better for trimming the jacket from twisted pair cable without damaging the individual conductors • Blade depth adjustment ensures precise cutting depth • Blade penetration controlled by tension loop • Strip length gauge CAT. NO. UPC NO. DESCRIPTION 45579 45579 Kwik Stripper® Twisted Pair Stripper 45579 45579 Typically used for Modular Plug Connectors (See pages 373) Pro Kwik Stripper® CATV • Designed for the professional CATV cable installer. Uses reversible stripping cartridges for RG6, RG59, RG11 and RG7 CATV cables that are replaceable • No adjustments needed • Included with the tool, the RG6/RG59 cartridge strips cable jacket and dielectric to 1/4" (6.4 mm) • Included with the tool, the RG11/RG7 cartridge strips cable jacket and dielectric to 1/4" (6.4 mm) • Extra-large finger hole 45591 CAT. NO. UPC NO. DESCRIPTION 45591 01174 Pro Kwik Stripper® CATV www.greenlee.com 359

COMMUNICATIONS HAND TOOLS AM 25 Slitter • Strips and slits 0.18" to 1.0" (4.5-25mm) diameter Round Cables • Adjustable cutting depth • Swivel blade for circular, longitudinal and spiral cuts • Spare blade in handle • Cable holding clip with integrated edge for removing slit insulation • Laser-trimmed, stainless-steel blade for long use • Slits PVC, Teflon and THHN • Perfect for armored cable CAT. NO. DESCRIPTION PA1820 AM 25 PA2109 Replacement blade NOTE: Do not use on live circuits. Not for polyethylene, polypropylene or XLP insulations Teflon® is a registered trademark of Dupont PA1820 AM 35 Slitter • Strips and slits 1.0" to 1.4" (25-35mm) diameter Round Cables • Adjustable cutting depth for insulation up to 0.18” (4.5 mm) thick • Swivel blade for circular, longitudinal and spiral cuts • Spare blade in handle • Cable holding clip with integrated edge for removing slit insulation • Laser-trimmed, stainless-steel blade for long use • Slits PVC, Teflon and THHN CAT. NO. DESCRIPTION PA1821 AM 35 PA2109 Replacement blade Teflon® is a registered trademark of Dupont NOTE: Do not use on live circuits. Not for polyethylene, polypropylene or XLP insulations PA1821 Universal Slitter • Strips and slits 0.18" to 1.0" (4.5-25mm) diameter Round Cables • Precision stripping and slitting of rubber, PVC, nylon and most insulation materials • Adjustable depth of cut • Swivel blade for circular, longitudinal and spiral cuts • Cable is supported during use • Cable support arm edge is used to pry off thick insulation • Laser-trimmed, stainless-steel blade for long use • A perfect tool for mid-point taps • Spare blade included PA1822 CAT. NO. DESCRIPTION PA1822 Universal splitter PA2109 Replacement blade NOTE: Do not use on live circuits. Not for polyethylene, polypropylene or XLP insulations TRUSTED SINCE 360 www.greenlee.com 1862

= NEW PRODUCT = REPLACEMENT PART = ACCESSORY B = BARE TOOL Pocket Cable Stripper • Specifically designed for stripping power and telecommunications cables from 3/4" to 1-1/2" in diameter (19 mm to 40 mm) • Strips solid conductor, stranded conductor and multiple conductor cables • Easy blade depth adjustment • Blade rotates for circular, longitudinal and spiral cuts. 1903 CAT. NO. UPC NO. DESCRIPTION 1903 12679 Cable Stripping Tool 13544 13544 Replacement Blade (2 per package) 13545 13545 Replacement Small Hook 13546 13546 Replacement Large Hook Cable TV “F” Flaring & Attachment Tool • Flares RG59, RG6 and RG6 Quad Cable types • Works with CATV "F" connectors • Save time on cable TV and satellite installations • Flare the shield braid back from the dielectric without nicking your finger • Make connections faster and easier with properly prepped cable • Attachment tool enables you to hold the connector comfortably to insert onto cable PA1927 CAT. NO. DESCRIPTION PA1927 Cable TV "F" Flaring & Attachment Tool Coax 3-Way Tool • Flares RG6 and RG6 Quad Cable types • Flares shield braid back from the dielectric without nicking your fingers • Attachment tool enables you to hold the connector comfortably to insert connector onto cable • Extraction tool to assist in coupling connector to port or to assist in uncoupling from port • Works with CATV "F" connectors CAT. NO. DESCRIPTION PA1928 PA1928 Coax 3-Way Tool www.greenlee.com 361

COMMUNICATIONS HAND TOOLS RG59/RG6/RG6 Quad Flaring Tool • Works on RG59 and RG6/6 Quad cable • Flares shield away from center dielectric • Saves time on CATV and satellite installation CAT. NO. DESCRIPTION PA1917 RG59/6/6QS flaring tool PA1917 BNC and CATV “F” Extraction Tools • Chrome finish • Comfortable driver-style plastic handle • 1908 CATV “F” is a combination tool. Use the hex socket to easily remove and insert the connectors; Use the threaded end to hold the connector while you insert cable for connectors. Helps to prevent finger injuries PA1907 CAT. NO. DESCRIPTION PA1908 CATV 8" (203 mm) PA1908 PA1907 BNC 8" (203 mm) PA1916 BNC 12" (305 mm) PA1916 SealTite® ProM Coax Crimper • Crimps weatherproof linear CATV “F”, BNC, RCA & right- angle compression-type connectors from all manufacturers • Works with RG6, RG6 Quad, RG59 & RG62AU coax cables • Versatile tool - accommodates multiple connectors • The only tool with a single, reversible head eliminating need for adapters. • No additional parts, attachments or other tools required to change from one crimp style to another • Quickly & easily adjust crimp height • Once properly set, lock with adjustment lock • Rated life cycle 30,000 (unloaded) PA1559 CAT. NO. DESCRIPTION PA1559 SealTite® ProM Coax Crimper TRUSTED SINCE 362 www.greenlee.com 1862

= NEW PRODUCT = REPLACEMENT PART = ACCESSORY B = BARE TOOL RG59/6Q-7/11 Pro Coax Compression Tool • Versatile tool crimps RG59, RG6, RG6 Quad , RG 7/11, BNC and RCA Compression Connectors • Cable holder rotates to accommodate different connector sizes • Adjustable Crimp length accommodates most manufacturers' connectors • Once adjusted, no additional parts or adapters are needed to change from one crimp style to another CAT. NO. DESCRIPTION PA70020 RG59/6Q-7/11 Pro Coax Compression Tool PA70020 SealTite® 59/6 CATV “F” Compression Crimper • Performs compression crimping of waterproof CATV “F” connectors for RG59 and RG6/RG6 Quad 75 ohm coaxial cables • Works on Augat/T&B Snap-N-Seal™ connectors, AIM CATV “F” waterproof connectors and Paladin SealTite™ connectors • Fully ratcheting one-cycle crimp function CAT. NO. DESCRIPTION PA901024 SealTite® Crimper PA901024 www.greenlee.com 363

COMMUNICATIONS HAND TOOLS SealTite® Cable TV “F” Compression Connectors • Large hex nut for easy installations • Patented design with 360º cable gripping sleeve • Solid brass construction with nickel plating to prevent UV degradation RG6 & RG59 RG6 Quad RG6 Quad DESCRIPTION CAT. NO. CAT. NO. CAT. NO. 10 Pack Clamshell PA9642 PA9643 PA9644 PA9642 20 Pack Clamshell PA9610 PA9611 PA9612 50 Pack Jar PA9645 PA9646 PA9647 100 Pack Bulk N/A PA9614 PA9615 *Also available in retail jar pack, PA9687. SealTite® RCA Compression Connectors • Patented design with 360º cable gripping sleeve • Full gold contacts for low signal loss • Includes slip-on color bands for easy cable identification • A set of bands includes 4 red, 2 green, 2 blue, 2 yellow and 2 white per ten connectors • Constructed from solid brass with nickel plating RG6 & RG59 RG6 Quad PA9714 DESCRIPTION CAT. NO. CAT. NO. 10 Pack Clamshell PA9720 PA9714 50 Pack Jar PA9721 PA9716 SealTite® BNC Compression Connectors • Patented design with 360º cable gripping sleeve • Full gold contacts for low signal loss • Includes slip-on color bands for easy cable identification • A set of bands includes 4 red, 2 green, 2 blue, 2 yellow and 2 white per ten connectors • Constructed from solid brass with nickel plating RG6 & RG59 RG6 Quad PA9715 DESCRIPTION CAT. NO. CAT. NO. 10 Pack Clamshell PA9730 PA9715 50 Pack Jar PA9731 PA9740 Hex Crimp Cable TV “F” Connectors • Crimp-on style cable TV “F” connectors • All-brass with nickel plating for durability • Designed for indoor use RG59 RG6 RG6 Quad DESCRIPTION CAT. NO. CAT. NO. CAT. NO. PA9676 10 Pack Clamshell PA9676 PA9677 PA9678 Twist-On Cable TV “F” Connectors • Connectors twist onto cable for quick installation • Sharp threads firmly grip cable for good connections • EZ-SPIN™ hex nut for easy installation RG59 RG6 DESCRIPTION CAT. NO. CAT. NO. PA9694 10 Pack Clamshell PA9694 PA9695 TRUSTED SINCE 364 www.greenlee.com 1862

= NEW PRODUCT = REPLACEMENT PART = ACCESSORY B = BARE TOOL Push-On Cable TV “F” Connectors • No crimp tool required. Simply strip cable and push connector onto it • Special knurled nut offers superior grip for strong connection • All brass, nickel-plated for durability and low signal loss • For indoor usage only RG59 RG6 PA9682 DESCRIPTION CAT. NO. CAT. NO. 10 Pack Clamshell PA9682 PA9683 Other Coaxial Connectors Connect CATV “F” cables to RCA plugs. • Eliminate the need for new cabling • Solid brass with nickel plate • 75 ohm rating CAT. NO. DESCRIPTION PA9719 PA901074 PA9719 Adapter, CATV “F” (female) to RCA (male) (Qty. 10) PA901074 Adapter, CATV “F” (female) to BNC (male) (Qty.1) Dual Port Ground Block • Provides a positive ground connection between two coaxial shields and the ground wire • Creates a connection for the dissipation of any unwanted electrical charges • Solid nickel plated zinc alloy PA9675 • High-performance, 360º contact, for up to 3.0 GHz • Suitable for satellite or cable TV • UL/CSA approved CAT. NO. DESCRIPTION PA9675 Dual Port Grounding Block Cable TV “F” Terminators • Solid brass body with nickel plating • ½ watt resistor (5% tolerance); 75 ohm PA9686 CAT. NO. DESCRIPTION PA9686 CATV "F" Terminators (10) Female Splice Adapter • Cable TV “F” female-to-female barrel adapter • Designed for performance up to 3.0 GHz PA9675 • Gold-plated contacts • 2 pack CAT. NO. DESCRIPTION PA9675 Female Splice Adapter BNC Coaxial Adapter • Precision manufactured from machined brass and nickel plated for corrosion resistance CAT. NO. DESCRIPTION 45728 BNC Straight Jack to Jack (1) 45728 www.greenlee.com 365

COMMUNICATIONS HAND TOOLS Cable TV Splitters • Split analog and digital cable TV signals to 2 to 4 outlets • HDTV compatible and works with cable modems • 75 ohm impedence • 5-1000 MHz bandwith • “F”-style female ports PA9688 CAT. NO. DESCRIPTION PA9688 2-Way Cable TV Splitter PA9689 PA9689 3-Way Cable TV Splitter PA9690 4-Way Cable TV Splitter PA9690 Satellite TV Splitters • Split satellite and digital signals to multiple outlets • Compatible with most digital satellite brands, digital cable TV and HDTV. • 75 ohm impedence • 5-2400 MHz bandwith • “F”-style female ports PA9669 CAT. NO. DESCRIPTION PA9669 2-Way Satellite TV Splitter PA9670 PA9670 3-Way Satellite TV Splitter PA9671 4-Way Satellite TV Splitter PA9671 Satellite Diplexer • Combines signal from satellite dish and UHF/VHF antenna into single coax cable output • 5-860 MHz antenna and 950-2450 satellite power pass • For RG6 or RG6 Quad • An additional diplexer can be used to split signals again for connection to satellite and antenna ports on receivers • Diplexed signals can be distributed through an amplifier to send signal to multiple outlets PA9673 CAT. NO. DESCRIPTION PA9673 Satellite Diplexer In-Line Amplifier • Boost signals to multiple outlets or on long cable runs • Works with satellite dish or terrestrial antenna installations with over 50’ of cable • Digital TV ready • 20 dB gain • DC 12-18V PA9672 • 950-2400 MHz maximum bandwidth CAT. NO. DESCRIPTION PA9672 In-Line Amplifier TRUSTED SINCE 366 www.greenlee.com 1862

= NEW PRODUCT = REPLACEMENT PART = ACCESSORY B = BARE TOOL SurePunch Pro Punchdown Tool • Terminate cable in single punch - including 23 AWG Cat6 • Detachable light with long-life LED specially designed to focus the light on the panel work area • Luminous intesity of the LED is 2200 mcd • Finger grips and non-slip rubber-embedded cushioned handle for comfort • Multi-use spudger that can be used as a screwdriver or an IDC contact insertion tool • Hook to feed wires through holes • Pick to separate bonded twisted-pair cables or to strip insulation and cut wire • Adjustable HI/LO spring compression for all cable types LO = 27.5 lbs (122 N), HI = 37.5 lbs (167 N) • Uses twist-and-lock style blades • Blade storage area in end of handle with comfortable latch cover PA3590 CAT. NO. DESCRIPTION Tools with lights PA3590 SurePunch Pro PDT handle (no blade) and light PA3584 SurePunch Pro PDT with Double 110 blade and light PA3587 SurePunch Pro PDT with 110 & 66 reversible cut & punch/punch-only blades and light PA3588 SurePunch Pro PDT with 1110/66 combination cut-only blade and light PA3596 SurePunch Pro PDT with 110 reversible cut & punch/punch-only blade and light PA3598 SurePunch Pro PDT with BIX™ cut-only (scissors type) blade and light PA3599 SurePunch Pro PDT with Krone® LSA cut-only (scissors type) blade and light Tools without lights PA3589 SurePunch Pro PDT handle (no blade) PA3585 SurePunch Pro PDT with Double 110 blade PA3586 SurePunch Pro PDT with 110 & 66 reversible cut & punch/punch-only blades PA3591 SurePunch Pro PDT with 1110/66 combination cut-only blade PA3592 SurePunch Pro PDT with 110 reversible cut & punch/punch-only blade PA3593 SurePunch Pro PDT with 66 reversible cut & punch/punch-only blade PA3595 SurePunch Pro PDT with Krone® LSA cut-only (scissors type) blade PA4599 SurePunch Pro PDT detachable light and batteries www.greenlee.com 367

COMMUNICATIONS HAND TOOLS SurePunch Punchdown Tools • Cushion grip, molded to the shape of your hand, for comfort and a sure, non-slip hold • Increased HI/LO impact force to meet demands of new cable types PA3570 and AWG sizes: LO= 30 lbs (133 N), HI= 40 lbs (178 N) • For 28-22 AWG (0.08 - 0.34 mm2), solid or stranded wire • Uses twist-and-lock style blades • Cushioned heel for comfort in the palm of your hand • New latch cover blade storage area in end of handle • Lanyard holes in end CAT. NO. DESCRIPTION PA3570 SurePunch PDT® handle (no blade) PA3571 SurePunch PDT® with 110/66 combination cut-only blade PA3572 SurePunch PDT® with 110 reversible cut & punch/punch-only blade PA3573 SurePunch PDT® with 66 reversible cut & punch/punch-only blade PA3574 SurePunch PDT® with BIX™ cut-only (scissors type) blade PA3575 SurePunch PDT® with Krone® : SA (scissors type) blade PA3576 SurePunch PDT® with Double - 110 blade PA3579 SurePunch PDT® with both 110 and 66 reversible cut & punch/punch-only blades PA4571 SurePunch 110/66 combination cut-only blade PA4572 SurePunch 110 reversible blade PA4573 SurePunch 66 reversible blade PA4574 SurePunch BIX™ cut-only blade PA4575 SurePunch Krone® LSA cut-only blade PA4591 SurePunch Double - 110 blade PA4591 PA4573 PA6514 PA4571 PA4574 PA4572 PA4575 PA6514 Telephone Unwrap Bit Impact Punchdown Tools • For 28-24 AWG Solid or Stranded conductor • Standard impact compression design PA3528 • Adjustable HI/LO settings for compression force • Impact force: HI = 35 lbs. (110 N), LO = 25 lbs. (155 N) • Reversible clip-in blades (except BIX & Krone) • Punches down with or without cut function (except BIX & Krone) • Spare blade stores in handle of tool (except BIX & Krone) • Impact handle and blades available separately • Leather holster available to attach to belt CAT. NO. DESCRIPTION PA4527 PA4528 PA4531 PA3526 Impact punchdown (tool handle only) PA3527 Impact punchdown w/66 blade PA3528 Impact punchdown w/110 blade PA4527 Replacement 66 blade PA4528 Replacement 110 blade PA4531 Replacement Krone®-type blade TRUSTED SINCE 368 www.greenlee.com 1862

= NEW PRODUCT = REPLACEMENT PART = ACCESSORY B = BARE TOOL Punchdown Tool • Inserts wire for a corrosion-resistant termination and trims off excess wire • Terminates 66, 110, BIX and Krone cross-connect and wall jacks • Spring-loaded for fast, low-effort wire seating and termination • Internal impact mechanism eliminates jamming for longer, trouble-free service life • Adjustable low - and high-impact force settings • Bayonet-style blade locking mechanism • Neoprene pad for shock absorption • Spare blade storage in the handle • Color-coded yellow on the cut side of tool CAT. NO. UPC NO. DESCRIPTION 46020 46020 Punchdown Tool Only 46023 46021 46021 Punchdown Tool w/66 Blade 46023 46023 Punchdown Tool w/110 Blade 46022 46022 66 Style Blade 46024 46024 110 Style Blade 46025 46025 BIX Style Blade ProPunch™ 110 Multi-pair Punchdown Terminates and cuts up to five pairs of data/voice cable at the same time! We designed it to perform over 30,000 cycle punches and to terminate most 23 AWG cable pairs in one punch! This tool delivers more than one and a half times the force of other multi-punchdown tools on the market today. The rugged “no-slip” handle fits comfortably in your hand with the handle end contoured to the heel of your hand • Fewer punches saves time • Smooth operation and rugged, comfortable handle absorbs punch recoil • Terminates 28-22 AWG (.08 - .34 mm2) solid or stranded wires with PA3560 single insulation • Cut and punch blade cassette or switch blades for punch only • Designed to work with 23 AWG CAT 6 cable CAT. NO. DESCRIPTION PA3560 ProPunch 110 with 5-pair head PA3561 ProPunch 110 with 4-pair head PA4560 Replacement 5-pair head PA4561 Replacement 4-pair head PA4562 Replacement 5-pair blade cassette PA4563 Replacement 4-pair blade cassette www.greenlee.com 369

COMMUNICATIONS HAND TOOLS Non-Impact Punchdown Tools with Fixed Blades • Non-impact, low-cost punchdown tools for 110, 66 & BIX • Works with 28-22 AWG (.08 - .5 mm2) • Solid or stranded, single insulation wire PA3580 • Comfortable rubber handle grip • Performs both cut and punch functions • Perfect for small jobs and the do-it-yourself installer • Fits in the palm of your hand PA3581 • Typically lower in cost than replacement blades for punchdown tools CAT. NO. DESCRIPTION WEIGHT PA3580 110 Punchdown Tool 3 oz PA3581 66 Punchdown Tool 3 oz PA3582 BIX™ Punchdown Tool 3 oz PA3582 Punchdown Stripper • Self-regulating strip depth • Fast and easy to use • Great for CAT-5, CAT-5e, and CAT-6 data cable • Built-in 110 punchdown (punch only) CAT. NO. DESCRIPTION WEIGHT PA1913 PA1913 Punchdown stripper 2 oz Pocket Probe Pick Probe pick for pulling wire, slicing, stripping cable and cleaning debris off terminal panels. Small and lightweight—pen-sized with clip for carrying in pocket • Spudger tip • Wire hook open • Wire stripper and slitting tooth • Non-conductive scraping tip PA1915 CAT. NO. DESCRIPTION WEIGHT PA1915 Pocket probe pick 3 oz closed Can Wrench • Strips PVC insulation • Strips outer jacket of AWG 22/4 and 24/4 telephone cable • Strips insulation of AWG 22 (.34 mm2) and AWG 24 (.20 mm2) wire PA1900 • 3/8” (9.5 mm) and 7/16” (11 mm) hex sockets for accessing panels • Durable shock-resistant design CAT. NO. DESCRIPTION: HEAVY DUTY KEYSTONE TIP- WEIGHT PA1900 Can Wrench 5 oz TRUSTED SINCE 370 www.greenlee.com 1862

= NEW PRODUCT = REPLACEMENT PART = ACCESSORY B = BARE TOOL Jack Terminator • High-grade, hardened steel frame offers superior performance and durability • Ratcheted action to ensure proper, consistent termination • Adjustment feature for extra leverage applications • Quick-change punch sets require no tools • Removable jack cradle allows for alternate lacing option • Punch heads can be purchased separately • Rubber-embedded handles provide extra comfort • For use with Modular Jacks listed below including CommScope® (Systimax®, Uniprise®), Leviton®, OCC®, HellermannTyton®, Hubbell®Premise Wiring and Legrand® (Ortronics®) PA8100 • Lifetime Warranty (crimper frame only) SPECIFICATIONS Specifications PA8100 General Jack Terminator™ With General Punchdown General Punch Head Only Punch Down Head-Set Head-Set Length 9.6” (245 mm) 9.75” (248 mm) 1.6” (40 mm ) 1” (26 mm) Height 3.25” (80 mm) 4” (102 mm) 4” (102 mm) 2.1” (55 mm) Width 1.25” (32 mm) 1.25” (32 mm) 1.25” (32 mm) 1.25” (32 mm) Weight 1.25 lbs (575 g) 1.4 lbs (652 g) 2 oz (54 g) 0.8 oz (23 g) CAT. NO. DESCRIPTION JACK COMPABILITY PA8100 Jack Terminator™ Crimper Frame Punchdown Head Set not Included PA8105 Jack Terminator™ with Punchdown Head-Set Systimax® - MPS100E, Uniprise® UNJ600/500 PA3711 Replacement Punchdown Head-Set Systimax® - MPS100E, Uniprise® UNJ600/500 PA3811 Replacement Punch Head Only Systimax® - MPS100E, Uniprise® UNJ600/500 PA8106 Jack Terminator™ with Punchdown Head-Set Systimax® - MGS400, MGS500, MGS600 PA3712 Replacement Punchdown Head-Set Systimax® - MGS400, MGS500, MGS600 PA8107 Jack Terminator™ with Punchdown Head-Set Leviton® - 41106, 41108, 5G108 PA3713 Replacement Punchdown Head-Set Leviton® - 41106, 41108, 5G108 PA8108 Jack Terminator™ with Punchdown Head-Set Leviton® - 61110, 5G110, 6110G PA3714 Replacement Punchdown Head-Set Leviton® - 61110, 5G110, 6110G PA8109 Jack Terminator™ with Punchdown Head-Set OCC® - KMJA5E, KMJA6, K6A PA3715 Replacement Punchdown Head-Set OCC® - KMJA5E, KMJA6, K6A PA8110 Jack Terminator™ with Punchdown Head-Set HellermannTyton® - RJ45FC5E, RJ45FC6 PA3716 Replacement Punchdown Head-Set HellermannTyton® - RJ45FC5E, RJ45FC6 PA8111 Jack Terminator™ with Punchdown Head-Set Hubbell® - HXJ Series PA3717 Replacement Punchdown Head-Set Hubbell® - HXJ Series PA8112 Jack Terminator™ with Punchdown Head-Set Ortronics® - TJ5E00, TJ600, TJ610 PA3718 Replacement Punchdown Head-Set Ortronics® - TJ5E00, TJ600, TJ610 www.greenlee.com 371

COMMUNICATIONS HAND TOOLS All-in-One UTP Snagless Crimper • Cuts and strips round or flat cable • All metal construction • Cushion grips for improved comfort and control • For standard and "snagless" RJ45 connectors • Also crimps RJ11/22 and RJ22 WE/SS style plugs PA1561 CAT. NO. DESCRIPTION PA1561 All-in-One UTP Snagless Crimper All-in-One Ultra Telephone Tools • 4 crimp functions with a single tool without changing dies • Crimps 4- position RJ22 handset • Crimps 4- and 6- position RJ11/RJ12 connectors • Crimps 8- position RJ45 (non-keyed) • Embedded cable cutter and stripper PA901014 • Crimps 28-24 AWG (.08 - .20 mm2) telephone and data cables • Advanced ratchet system • Precision die-cast aluminum head • Crimps 6- position RJ11-DEC offset type connectors (P/N 901014) CAT. NO. DESCRIPTION PA901014 All-in-One Ultra Telephone Tool AMP (Tyco) PA901016 All-in-One Ultra Telephone Tool (WE/SS) PA2530 Replacement blade kit All-in-One Pro Telephone Tools • Crimps 4- position RJ22 connectors • Crimps 4- and 6- position RJ11/RJ12 connectors • Crimps 8- position RJ45 (non-keyed) connectors • Embedded cable cutter and stripper • Crimps 28-24 AWG (.08 - .20 mm2) telephone and data cables • Comfortable rubber-embedded handles • Built-in safety ratchet release PA1530R CAT. NO. DESCRIPTION PA1540 All-in-One Pro Telephone Tool AMP (Tyco) PA1530R All-in-One Pro Telephone Tool (WE/SS) PA2530 Replacement blade kit TRUSTED SINCE 372 www.greenlee.com 1862

= NEW PRODUCT = REPLACEMENT PART = ACCESSORY B = BARE TOOL Telephone Ratchet Crimper • Combination tool terminates 8- position, 6- position and 4- position (45575 only) modular style plugs • No need to change crimping dies • Full-cycle ratchet mechanism provides consistent, quality terminations every cycle • Straight action ensures uniform crimp • Small, compact design • Built-in wire cutter and stripper for flat cable • All-steel frame has rust-resistant, black oxide finish 45553 CAT. NO. UPC NO. DESCRIPTION Typically used for Modular Plug Connectors (See below) 45553 45553 Telephone Ratchet Crimper 45575 45575 Telephone Ratchet Crimper 45575 Typically used for Modular Plug Connectors (See below) Our Telephone Ratchet Crimper was designed with a compact head to fit into tight spaces and ergonomic handles for opera- tor comfort. Modular Plug Connectors RJ45 RJ11 • RJ45 8-conductor modular plugs • RJ11 6-conductor modular plugs • 50 micron gold plating • For use with stranded wire • Meets or exceeds EIA/TIA • 50 micron gold plating RJ45 specifications WE/SS-STYLE 8P8C CONNECTORS CONNECTOR TYPE CABLE TYPE QUANTITY CAT. NO. RJ45 Cat5e, Solid or Stranded 10/Pack PA9546 Round, Flat or Oval 50/Pack PA9655 100/Pack PA9549 RJ11 WE/SS-STYLE 6P6C CONNECTORS DESCRIPTION CONNECTOR TYPE CABLE TYPE QUANTITY CAT. NO. RJ11 Solid or Stranded 10/Pack PA9520 Round, Flat or Oval www.greenlee.com 373

COMMUNICATIONS HAND TOOLS EK50ML Micro Crimping Tool • Ergonomic; total weight less than 2.2 lbs • Crimp 3x faster with 90% less force • LED work light • 65% faster crimping cycle vs ratcheting tool. • 250 crimps per cycle charge when crimping 10AWG wire. • Patented Jaw Actuation for crimping cycle • Innovative trigger with PowerSense™ Technology • Overmolded grip for maximum comfort • 10.8V Li-Ion battery with charge indicator SPECIFICATIONS Weight 2.2 lbs (1 kg) CAT. NO. UPC NO. DESCRIPTION Crimping tool kit with 12mm jaw and 110V charger with EK50ML12011 03105 carrying case Crimping tool kit with 13.8mm jaw and 110V charger with EK50ML13811 03108 carrying case Crimping tool kit with 12mm jaw and 230V charger with EK50ML138B EK50ML12022 03123 carrying case Crimping tool kit with 13.8mm jaw and 230V charger with EK50ML13822 03124 carrying case EK50ML120B 03128 12mm jaw EK50ML bare tool EK50ML138B 03130 13.8mm jaw EK50ML bare tool MBP108 03127 10.8V EK50ML Li-Ion Battery MBC110 03125 10.8V EK50ML Li-Ion Battery Charger, 110V MBC230 03126 10.8V EK50ML Li-Ion Battery Charger, 230V EK50MLCASE 03131 EK50ML Carrying Case Note: EK50ML138 is compatible with all Greenlee Kwik Cycle® and COMPATIBLE DIE SETS CrimpALL® dies for various types of cables and sizes. Wezag® Panduit® Thomas & Betts® Ideal® EK50ML120 CS30, CS150 CT-2600,CT-300 Sta-Kon® See page 375-377 for the complete line of dies. EK50ML138 Crimpmaster™ CrimpALL® 8000 Series Crimpers • Ultra-smooth, fully ratcheting crimp cycle with built-in safety release • Interchangeable die sets of heat-treated steel for long life • Soft, rubber-embedded handles • Long-lasting tool that delivers over 50,000 crimp cycles. • Rugged, double-plated jaw design to increase life span. • Lifetime warranty on tool; one-year on die sets • Angled head to prevent awkward wrist bending during operation • Reduced handle grip distance makes it easy for both small and large hands • Higher crimp force produced with less hand force so hand doesn’t tire as quickly PA8000 • No breakover hand force – the effort required by most crimpers to make the last click at the end of the cycle to complete the crimp – the CrimpALL does the work • Manufactured using the newest fine blanking technologies. • EZI-Change™ die screws make changing dies quick and easy – no screwdriver required CAT. NO. DESCRIPTION PA8000 CrimpALL® tool frame PA2303 Replacement EZI-Change™ die screws (2) TRUSTED SINCE 374 www.greenlee.com 1862

= NEW PRODUCT = REPLACEMENT PART = ACCESSORY B = BARE TOOL 1300 Series Crimpers • Fully-ratcheting cycle with built-in safety release • Interchangeable die sets of heat-treated steel for long life • Easy to use and maintain • Available as complete tool with die set inserted or separate tool frame and individual die sets • Foam-lined case available to hold frame and 6 die sets together. • Lifetime warranty on tool; one-year on die sets • EZI-Change™ die screws make changing dies quick and easy – no screwdriver required • Most precise and tightest tolerances on die sets in the industry PA1302 • Six ratchet gear settings for optimum crimp performance CAT. NO. DESCRIPTION PA1302 Crimp tool frame PA2303 Replacement EZI-Change™ die screws (2) PA2346 Replacement Spring CrimpALL® Interchangeable Die Sets for Modular Plugs DESCRIPTION CAT. NO. CAT. NO. CABLE TYPE CONNECTION CRIMP SIZES TOOL WITH DIE DIE ONLY REMARKS RJ45 - 8P8C (8 Pin) Flat/Round, Solid/Stranded RJ45 Unkeyed WE and SS PA8030 PA2061 Western Electric (WE)/Stewart PA1307 Connector (SS) RJ11 & RJ12 - 6P6C, Flat/Round, Solid/Stranded RJ11 & RJ12 Unkeyed WE PA8031 PA2062 Western Electric (WE)/Stewart 6P4C, 6P2C and SS PA1340 Connector (SS) RJ22 Handset - 4P4C Flat/Round, Solid/Stranded 4 Pin Handset WE and SS PA8032 PA2063 Western Electric (WE)/Stewart (4 Pin) Connector (SS) RJ45 - 8P8C (8 Pin) Flat/Round, Solid/Stranded RJ45 Unkeyed AMP PA8033 PA2064 AMP (Tyco) Inc. Connectors Only PA1342 RJ50 - 10P10C (10 Pin) Flat/Round, Solid/Stranded RJ50 Unkeyed WE and SS PA8036 PA2068 Virginia Plastics (VP) PA1345 British Telecom 6 Pole Flat/Round, Solid/Stranded BT 6 Pole PA2032 British Telecom Plugs Only Plug RJ45, AMP/Molex 6.0mm Dia. Round, RJ45 STP AMP & Molex, PA2674 AMP (Tyco) Inc. & Molex Connectors for dia. Shielded (STP) 6.0mm dia. cable Cable CrimpALL® Interchangeable Die Sets for Specialty Crimpers DESCRIPTION CAT. NO. CAT. NO. CABLE TYPE CONNECTION CRIMP SIZES TOOL WITH DIE DIE ONLY REMARKS RJ45 WE/SS & UTP 4-Pair & RG6/ RJ45 WE/SS 8-pin & PA8045 PA2687 For standard RJ45 WE/SS Modular RG6/RG6 Quad CATV RG6 Quad 0.360" (9.1mm) HEX/0.324" PA1387 Plugs & 1-piece RG6/RG6 Quad "F" (8.2mm) HEX CATV "F" conns. www.greenlee.com 375

COMMUNICATIONS HAND TOOLS CrimpALL® Interchangeable Die Sets for Coaxial Connectors DESCRIPTION CAT. NO. CAT. NO. CABLE TYPE CONNECTION CRIMP SIZES TOOL WITH DIE DIE ONLY REMARKS RG58, RG59, BNC/TNC and 3 Piece 0.256" (6.5mm, 0.213" (5.4mm), PA8001 PA2034 Common 2-piece and 3-piece RG62AU 0.068" (1.7mm) HEX PA1317 BNC/TNC RG174, RG59/62, HDTV SMA, True 75-ohm 0.255" (6.5mm), 0.197" PA8002 PA2648 Common 2-piece and 3-piece BNC/ mini-coaxial 75-ohm BNC/TNC, Mini-UHF (5.0mm), 0.178" (4.5mm), PA1366 TNC (Kings, ADC, Amphenol, etc.) 0.068" (1.7mm) HEX & 0.042" (1.0mm) SQ RG59, RG6, Belden HDTV BNC/TNC/CATV "f" 0.324" (8.2mm), 0.255" PA8003 PA2649 Common 2-piece and 3-piece BNC/ 8281, Belden 1694A True 75-ohm (6.5mm), 0.068" (1.7mm) HEX PA1367 TNC (Kings, ADC, Amphenol, etc.) & 0.052" (1.3mm), 0.042" (1.0mm) SQ RG6, Belden 1694, HDTV BNC/TNC True 0.278" (7.0mm), 0.275" PA8004 PA2657 Common 3-piece BNC/TNC (Kings & Bleden 1694A 75-ohm (6.9mm), 0.068" (1.7mm) HEX & PA1368 ADC HDTV) 0.042" (1.0mm) SQ RG58, Mini-59, RG- SMA, SMB, Mini-59 BNC/ 0.128" (3.2mm), 0.213" PA8005 PA2653 Common 2-piece and 3-piece SMA/ 174, small coaxial TNC, Mini-UHF (5.4mm), 0.197" (5.0mm), 0.178" PA1363 SMB/BNC/TNC & Mini-UHF (4.5mm), 0.068" (1.7mm) HEX & 0.042"(1.0mm) SQ RG58, RG174, AT&T Thinnet, BNC/TNC, 0.213" (5.4mm), 0.178" (4.5mm) PA8006 PA2046 50/75 ohm small 2-piece & 3-piece 735, 50 and 75-ohm Mini-UHF 0.068" (1.7mm) HEX & 0.042" PA1335 BNC/TNC (Kings, ADC, etc.) (1.0mm) SQ RG59, RG62, BNC/TNC and Mini-UHF 0.315" (8.0mm), 0.252" PA8007 PA2047 75 ohm 2-piece & 3-piece BNC/TNC Belden 8281, (6.4mm), 0.068" (1.7mm), HEX PA1336 (Kings, ADC, Amphenol, etc.) 50 and 75-ohm 0.042" (1.0mm) SQ RG174, RG179 and BNC/TNC 0.178" (4.5mm), 0.128" (3.2mm), PA8008 PA2051 Common 2-piece and 3-piece BNC/ Small Cable 0.068" (1.7mm) HEX PA1338 TNC/SMA/SMB Connection RG6 and RG6 Quad, BNC and CATV "F" Type 0.360" (9.1mm), 0.324" PA8012 PA2045 Common 2-piece and 3-piece BNC/ Belden 1694A & HDTV (8.2mm), 0.068" (1.7mm) HEX PA1356 TNC and CATV "F" 2-piece RG59, RG6 Video CATV "F" Type 0.346" (8.8mm)m 0.319" PA8013 PA2042 Crimps Ferrules or Sleeves Only Cable (8.2mm), 0.256" (6.5mm) HEX PA1328 RG8, RG11, RG213 N-Type 0.429" (10.9mm), 0.100" PA8014 PA2656 Common 2-piece and 3-piece "N"- (2.54mm), 0.080" (2.03mm) HEX PA1365 Type (Kings, ADC, Amphenol, etc.) RG8, RG11, RG213, N-Type, MS39012 Type 0.415" (10.5mm), 0.095" PA8015 PA2039 Crimps Pins and Ferrules RG216 (2.4mm) HEX PA1319 Belden 1855A, HDYV BNC/TNC True 0.178" (4.5mm), 0.255" PA8049 PA2699 Kings, ADC, B&L, Trompeter, 1865A, 1505A, 75-ohm (6.5mm), 0.278" (7.0mm), PA1389 Amphenol, Switchcraft 1505F, 1694A, 0.068" (1.7mm), 0.041" 1694F, 179DT (1.0) HEX Teflon® is a registered trademark of Dupont TRUSTED SINCE 376 www.greenlee.com 1862

= NEW PRODUCT = REPLACEMENT PART = ACCESSORY B = BARE TOOL CrimpALL® Interchangeable Die Sets for Insulated Terminal Crimpers DESCRIPTION CAT. NO. CAT. NO. CABLE TYPE CONNECTION CRIMP SIZES TOOL WITH DIE DIE ONLY REMARKS Insulated Terminals Solid or Stranded Wire, 12-10 (Yellow), 16-14 (Blue), PA8021 PA2035 For Large Professional Terminals and Lugs 22-10 AWG (.34 - 6 22-18 (Red), (6-4 / 2.5 - 1.5 / PA1305 (Panduit, T & B, etc.) mm2) .34 - .75 mm2) Insulated Terminals Solid or Stranded Wire, 12-10 (Yellow), 16-14 (Blue), PA8022 PA2040 For Standard Commercial Terminals and Lugs 22-12 AWG (.34 - 4 22-18 (Red), (4/1.5 - 2.5 / .34 PA1308 (Hardware Store Brands) mm2) - .75 mm2) Insulated Terminals Solid or Stranded Wire, 16-14 (Blue), 22-18 (Red), PA8023 PA2029 For Smaller Wire Barrel Terminals and Lugs 26-14 AWG (.10 - 2.5 22-26 (Yellow) (1.5 - 2.5 / .34 - PA1334 mm2) .75 / .34 - .10 mm2) CrimpALL® Interchangeable Die Sets for Non-Insulated Terminal Crimpers DESCRIPTION CAT. NO. CAT. NO. CABLE TYPE CONNECTION CRIMP SIZES TOOL WITH DIE DIE ONLY REMARKS Non-Insulated Solid or Stranded Wire, 10-8 / 14-12 / 18-16 / 22-20 PA8024 PA2031 For Standard Commercial Terminals Terminals and 22-8 AWG (.34 - .10 (6 - 10 / 2.5 - 4 / .75 - 1.5 / PA1322 Lugs mm2) .34 - .50 mm2) CrimpALL® Interchangeable Die Sets for Open Barrel, Box and Terminal Systems DESCRIPTION CAT. NO. CAT. NO. CABLE TYPE CONNECTION CRIMP SIZES TOOL WITH DIE DIE ONLY REMARKS Open Barrel Non- Solid or Stranded Wire, 22-18 / 16-14 / 12-10 PA8026 PA2033 For Standard Commercial Terminals Insulated Terminals, 22-10 AWG (.34 - 6 (.34 - .75 / 1.5 - 2.5 / PA1306 Narrow Lugs and mm2), F Type* 4-6 mm2) Power Contacts Open Barrel Non- Solid or Stranded Wire, 16-14 / 22-18 PA8027 PA2096 For Standard Commercial Terminals Insulated Terminals, 22-14 AWG (.34 - 2.5 (1.5 - 2.5 / .34 - .75 mm2) Wide Lugs and Power mm2), F Type* Contacts Open Barrel D-Sub Solid or Stranded Wire, 28-24 / 22-20 PA8029 PA2097 For Standard D-sub Pins Only; not for Contact Pins RS-232 28-20 AWG (.08 - .50 (.08 - .2 / .34 - .5 mm2) PA1359 HD D-subs mm2), F Type* CrimpALL® Interchangeable Die Sets for Wire Ferrules DESCRIPTION CAT. NO. CAT. NO. CABLE TYPE CONNECTION CRIMP SIZES TOOL WITH DIE DIE ONLY REMARKS Insulated & Non- Solid or Stranded Wire, 22-20 / 18-16 / 14-12 / 10 PA8025 PA2095 For DIN or US Type Insulated Wire 22-10 AWG (.34 - 6 (.34 - .55 / .75 - 1.5 / 2.5 - PA1360 Wire Ferrules Ferruls mm2) 4 / 6 mm2) www.greenlee.com 377

COMMUNICATIONS HAND TOOLS D-sub Indent Crimpers • Adjustable Pin Height Locator • Cushion Grips for comfort CAT. NO. DESCRIPTION PA1460 D-sub 4 Indent Crimper 26-20 AWG PA1461 D-sub 4 Indent Crimper 20-12 AWG PA1462 D-sub 8 Indent Crimper 26-20 AWG PA1460 Electrical Terminal Crimper • D-sub Pins & Sockets 26-28 AWG • Butt-Insulated Connectors 22-26 AWG • Telephone Piercing Spade Lugs 22-26 AWG • Open Barrel Connectors 14-18, 20-22 AWG CAT. NO. DESCRIPTION PA1176 Multi-Purpose Electrical Terminal Crimper PA1176 EDAC/ELCO Crimper Crimp tool for broadcast professionals terminating loose 28-18 AWG (.08-75 mm2) EDAC and ELCO rack and panel open barrel contacts • Crimps EDAC pins 516-290-590 & 516-290-591 along with ELCO pins 000-60-8017-03-13 • Embedded pin locators properly align pins to ensure accurate, reliable crimping • Fully-ratcheted to prevent under crimping • Requires low hand force and provides superior crimp force • True ergonomic design for extreme comfort and performance • Non-slip, soft rubber handles • Double-plated for extended long-life and crimping accuracy • Factory-calibrated and set for precision PA1670 SPECIFICATIONS Pin locators Weight 19 oz. (538 g) CAT. NO. DESCRIPTION PA1670 EDAC/ELCO Crimper TRUSTED SINCE 378 www.greenlee.com 1862

= NEW PRODUCT = REPLACEMENT PART = ACCESSORY B = BARE TOOL Open Barrel Contact Pin Crimper Professional crimping tool for open-barrel box and round connector contacts with a wire range of 30-18AWG (0.05-.75 mm2) • Precision fixed dual-plate dies for crimp accuracy • Crimps non-insulated terminal lugs, cable lugs and parallel and serial splices or “F-Type” • Works with Molex, Waldom & Leoco-type connectors • Durable steel construction for long life • Rubber-embedded ergonomic handles for low-effort operation PA1645 SPECIFICATIONS Weight 14 oz. (400 g) Range Small: 30-24 AWG (0.05-.20 mm2) Medium: 22-18 AWG (.34-.75 mm2) CAT. NO. DESCRIPTION PA1645 Open Barrel Contact Pin Crimper Open Barrel Contact Pin Crimper Professional crimping tool for open-barrel box and round connector contacts with a wire range of 24-14 AWG (0.2-2.5 mm2) • Precision fixed dual-plate dies for crimp accuracy • Built-in locator • Crimps non-insulated terminal lugs, cable lugs and parallel and serial splices or “F-Type” • Works with Molex, Waldom & Leoco-type connectors • Durable steel construction for long life • Rubber-embedded ergonomic handles for low-effort operation SPECIFICATIONS Weight 14 oz. (400 g) Range Small: 24-22 AWG (0.05-.20 mm2) PA1631 Medium: 18-14 AWG (.34-.75 mm2) CAT. NO. DESCRIPTION PA1631 Open Barrel Contact Pin Crimper www.greenlee.com 379

COMMUNICATIONS HAND TOOLS Kwik Cycle® 9" Crimp Frame • Used to manually crimp a wide variety of connectors and terminals to factory specifications • Frame features a precision full-cycle ratchet for accurate, repeatable crimps every cycle • Crimp release lever improves throughput by eliminating rejected terminations due to improper connector positioning • Frame features a tension adjustment preset at the factory for optimum performance • High-leverage force and ergonomically-designed handle provides comfortable use • Frame and dies are manufactured from heat-treated, hardened tool steel for superior function and long life • All die sets are easily interchangeable with a simple screwdriver. 45504 See our comprehensive line of connectors on pages 364 and 373. CAT. NO. UPC NO. DESCRIPTION 45504 45504 Kwik Cycle 9" Crimp Frame Kwik Cycle® 9" Interchangeable Die Sets for Insulated & Non-Insulated Terminals DESCRIPTION CAT. NO. UPC NO. CAT. NO. UPC NO. CONNECTION FEATURES TOOL WITH DIE DIE ONLY Color Coded nests for easy identification 22-10 AWG Standard insulated terminals, ring tongue, 45500 45500 45509 45509 spade lug, slide on and but splices Color Coded nests for easy identification 22-10 AWG for fully insulated slide-on style connectors 45501 45501 45570 45570 AMP UltrafastTM style For mini insulated terminals with smaller wire 26-16 AWG barrels. RIng tongue, spade, slide on and butt 45565 45565 splices For non-insulated terminals and splices 45505 45505 45507 45507 22-8 AWG TRUSTED SINCE 380 www.greenlee.com 1862

= NEW PRODUCT = REPLACEMENT PART = ACCESSORY B = BARE TOOL Heat Gun • Electronic variable heat control ranging from 250-1100º F (120-590º C) • Two speeds: high & low • Double insulation safeguards injury from possible electrical failure inside gun • Comfortable, lightweight design reduces operator fatigue • Three nozzles included: window nozzle, deflection nozzle and .47” (12 mm) focusing nozzle • UL listed PA1873 SPECIFICATIONS Power reqs. 120VAC 60 Hz Current draw 7.5 amps max. Power cons. 1200 watts max. CAT. NO. DESCRIPTION PA1873 Heat gun Desoldering Tools • Removes solder with simple push-button operation • Standard (regular & anti-static) replacement tips available • Repair kits come complete with replacement spring and suction rods • Durable metal frame CAT. NO. DESCRIPTION: DESOLDERING TOOLS PA1700 PA1700 Desoldering tool (standard) PA2712 Standard replacement tip Cable Tie Gun • For use with plastic cable ties up to 0.25” (6.35 mm) in width • Neatly fastens and cuts in one action • Adjustable tension for changing cable bundle pressure • Automatic cable tie cut off PA1828-1 CAT. NO. DESCRIPTION PA1828-1 Cable tie gun Note: Leaves 1 mm tab of lock after cut is made. Kwik Cycle® Cable Tie Guns • Tension adjustment allows the user to adapt the tool to the size of the tie • Automatic cut-off eliminates sharp edges on ties CAT. NO. UPC NO. DESCRIPTION 45306 45306 Standard Cable Tie Gun 45306 45300 45300 Heavy-Duty Cable Tie Gun www.greenlee.com 381

COMMUNICATIONS HAND TOOLS HDMI TOOLS A PRODUCT VIDEO IS AVAILABLE, SCAN THIS QR CODE OR VISIT: www.youtube.com/GreenleeDEMO HDMI®* HDFT™ Cable Prep Tool • Use with Greenlee® 24 AWG HDFT™ cable & connectors • Cuts 24 AWG HDFT™ cables, strips outer jacket and twisted pair shielding • Curved blade for cutting HDMI®* and HDFT™ cables • Precision stripping cavity for removing outer jacket on 24 AWG HDFT™ cables • Exclusive cavity for removing twisted pair shielding on 24 AWG HDFT™ cables CAT NO. UPC NO. DESCRIPTION PA1192 PA1192 00072 Cable Prep Tool 24 AWG HDMI®* Field Terminating Cable • Use with Greenlee® HDFT™ Connectors • Make premium HDMI®* High Speed with Ethernet cables • Supports HDMI®* 1.4 features: 3D, Ethernet and Audio Return • 100’ 24 AWG HDFT™ cable • Solid-core long grain copper • Fifth twisted pair for Ethernet and audio return • Other HDMI®* 1.4** features supported: 10.2 Gbps Data Rate, 3D Video Formats, Deep Color and 4k x 2k Resolution FTHD24-100 CAT NO. UPC NO. DESCRIPTION FTHD24-100 00079 100' 24 AWG Field Terminating Cable HDMI®* Field Terminating Connectors • Make custom length, premium HDMI®* cables • Eliminates cable clutter • Costs less than pre-terminated cables • 10 or 50 pack – 24 AWG HDFT™ Connector Components • Use With Greenlee® 24 AWG HDMI®* Field Terminating Cable only • Includes main connector terminal block and wire guides • Guides are mated and colorcoded for 24 AWG HDMI®* Field Terminating cable • Make custom length, premium HDMI®* High Speed with Ethernet cables HDCN24-10 CAT NO. UPC NO. DESCRIPTION HDCN24-10 00073 Field Terminating Connectors (10 Pack) HDCN24-50 00074 Field Terminating Connectors (50 Pack) *HDMI Equivalent HDMI®* Registered trademark of HDMI Licensing, LLC HDFT™ Trademark owned by the Quest Group TRUSTED SINCE 382 wwwwww..ggrreeeennlleeee..ccoomm 1862

= NEW PRODUCT = REPLACEMENT PART = ACCESSORY B = BARE TOOL HDMI TOOLS HDFT™ Pro Deluxe Kit • Make custom length, premium HDMI®* cables • Eliminates cable clutter • Costs less than pre-terminated cables 14 Piece Kit Includes: 1) PA1192 HDMI®* HDFT™ Cable Prep Tool (1) PA8700 HDMI®* HDFT™ Termination Tool (10) HDCN24-10 HDMI®* Field Terminating Connectors (1) PA1175 Media Cable Cutter PA4017 (1) TC-30 Deluxe Carrying Case CAT NO. UPC NO. DESCRIPTION PA4017 00099 Pro Deluxe Kit HDFT™ Pro Kit 12 Piece Kit Includes: (1) PA1192 HDMI®* HDFT™ Cable Prep Tool (1) PA8700 HDMI®* HDFT™ Termination Tool (10) HDCN24-10 HDMI®* Field Terminating Connectors CAT NO. UPC NO. DESCRIPTION PA4019 00101 Pro Kit PA4019 Pro HDMI® Cable Tester • 14 LED readout for easy checking • Sweep function checks for crossed wires • 9V battery included PA1599 CAT NO. UPC NO. DESCRIPTION PA1599 00075 Pro Cable Tester HDFT™ Die Set • Precision cast 4140 steel for durability • High tensile steel cutting blades for long life PA4003 • Error-proof design avoids misalignment CAT NO. UPC NO. DESCRIPTION PA4003 00098 Die Set *HDMI Equivalent HDMI®* Registered trademark of HDMI Licensing, LLC HDFT™ Trademark owned by the Quest Group wwwwww..ggrreeeennlleeee..ccoomm 383

COMMUNICATIONS NOTES TRUSTED SINCE 384 www.greenlee.com 1862