Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 213 Series TwinChip™ Series - DO-214 RoHS Pb e3 Description TwinChip™ Series DO-214 are very low capacitance SIDACtor® thyristors designed to protect broadband equipment such as VoIP, DSL modems and DSLAMs from damaging overvoltage transients. This series provides a surface mount solution that enables equipment to comply with global regulatory standards, while limiting the impact to broadband signals. Features and Benefits • Low voltage overshoot • RoHS Compliant and Halogen-Free • Low on-state voltage • Pb-free E3 means 2nd • Does not degrade surge Agency Approvals level interconnect is capability after multiple Pb-free and the terminal surge events within limit. finish material is tin(Sn) Agency Agency File Number • Low distortion (IPC/JEDEC J-STD- E133083 • Fails short circuit when 609A.01) surged in excess of • Recognized to UL 497B ratings as an Isolated Loop • 40% lower than Circuit Protector comparable product Schematic Symbol Applicable Global Standards • TIA/968-A/B • YD/T 950 • ITU K.20/21/45 • ITU K.20/21/45 Enhanced* • IEC 61000-4-5 2nd edition • GR 1089 Inter-building* • GR 1089 Intra-building • YD/T 1082 • YD/T 993 * Additional series resistance may be required to comply Additional Information Datasheet Resources Samples © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 02/05/20

Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 213 Series Electrical Characteristics V V V DRM S I I I T Part Number Marking @l =5µA @100V/µs H S T @I =2.2 Amps @1MHz, 2V bias DRM T V min V max mA min mA max A max V max pF min pF max P0642SALRP P062A 58 77 120 800 2.2 8 25 45 P0722SALRP P072A 65 88 120 800 2.2 8 20 45 P0902SALRP P092A 75 98 120 800 2.2 8 20 40 P1102SALRP P112A 90 130 120 800 2.2 8 15 35 P1302SALRP P132A 120 160 120 800 2.2 8 15 35 P1502SALRP P152A 140 180 120 800 2.2 8 15 30 P1802SALRP P182A 170 220 120 800 2.2 8 10 30 P2302SALRP P232A 190 260 120 800 2.2 8 10 25 P2602SALRP P262A 220 300 120 800 2.2 8 10 25 P3002SALRP P302A 280 360 120 800 2.2 8 10 25 P3502SALRP P352A 320 400 120 800 2.2 8 10 20 P4202SALRP P422A 380 500 120 800 2.2 8 10 20 P4802SALRP P482A 440 600 120 800 2.2 8 5 20 P6002SALRP P602A 550 700 120 800 2.2 8 5 20 P0642SBLRP P062B 58 77 120 800 2.2 8 25 45 P0722SBLRP P072B 65 88 120 800 2.2 8 20 45 P0902SBLRP P092B 75 98 120 800 2.2 8 20 40 P1102SBLRP P112B 90 130 120 800 2.2 8 15 35 P1302SBLRP P132B 120 160 120 800 2.2 8 15 35 P1502SBLRP P152B 140 180 120 800 2.2 8 15 30 P1802SBLRP P182B 170 220 120 800 2.2 8 10 30 P2302SBLRP P232B 190 260 120 800 2.2 8 10 25 P2602SBLRP P262B 220 300 120 800 2.2 8 10 25 P3002SBLRP P302B 280 360 120 800 2.2 8 10 25 P3502SBLRP P352B 320 400 120 800 2.2 8 10 20 P4202SBLRP P422B 380 500 120 800 2.2 8 10 20 P4802SBLRP P482B 440 600 120 800 2.2 8 5 20 P6002SBLRP P602B 550 700 120 800 2.2 8 5 20 P3002SCLRP P302C 280 360 120 800 2.2 8 20 35 P3502SCLRP P352C 320 400 120 800 2.2 8 20 30 P4202SCLRP P422C 380 500 120 800 2.2 8 15 30 P4802SCLRP P482C 440 600 120 800 2.2 8 15 30 P6002SCLRP P602C 550 700 120 800 2.2 8 10 25 P7002SCLRP P702C 640 850 120 800 2.2 8 10 30 Notes: - Absolute maximum ratings measured at T= 25ºC (unless otherwise noted). A - Components are bi-directional. Surge Ratings es 0.2/310 1 2/10 1 8/20 1 10/160 1 10/I5PP60 1 5/320 1 10/360 1 10/1000 1 5/310 1 ITSM di/dt Seri 0.5/700 2 2/10 2 1.2/50 2 10/160 2 10/560 2 9/720 2 10/360 2 10/1000 2 10/700 2 50/60 Hz A min A min A min A min A min A min A min A min A min A min A/µs A 20 150 150 90 50 75 75 45 75 20 500 B 25 250 250 150 100 100 125 80 100 25 500 C 50 500 400 200 150 200 175 100 200 30 500 Notes: 1. Current waveform in µs 2. Voltage waveform in µs - Peak pulse current rating (I ) is repetitive and guaranteed for the life of the product that remains in thermal equilibrium. PP - I ratings applicable over temperature range of -40ºC to +85ºC PP - The component must initially be in thermal equilibrium with -40°C < T < +150°C J © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 02/05/20

Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 213 Series Thermal Considerations Package Symbol Parameter Value Unit DO-214AA T Operating Junction Temperature Range -40 to +150 °C J T Storage Temperature Range -65 to +150 °C S R Thermal Resistance: Junction to Ambient 90 °C/W ƟJA V-I Characteristics t x t Pulse Waveform r d +I PP tr = rise time to peak value IT – %I100 PVaelauke td = decay time to half value IIHS urrent Waveform = tr x td C IDRM se -V +V ul 50 Half Value P VT VDRM ak e VS – P P P I 0 tr td 0 t – Time (µs) -I Normalized V Change vs. Junction Temperature Normalized DC Holding Current vs. Case Temperature S 14 2.0 % 12 Change – 1068 IHT= 25ºC)C 111...864 S 4 25 °C (H 1.2 25°C V I of 2 of 1.0 ercent -40 Ratio 00..86 P -6 0.4 -8 -40 -20 0 20 40 60 80 100 120 140 160 -40 -20 0 20 40 60 80 100 120140 160 Case Temperature (T ) - ºC Junction Temperature (T ) – °C C J © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 02/05/20

Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 213 Series Soldering Parameters Reflow Condition Pb-Free assembly Figure 1 - Temperature Min (T ) +150°C t s(min) P T Pre Heat - Temperature Max (Ts(max)) +200°C P Ramp-up CriTtiLc taol TZPone - Time (Min to Max) (t) 60-180 secs. s T Average ramp up rate (Liquidus Temp (T) to peak) 3°C/sec. Max. L t L T L T to T - Ramp-up Rate 3°C/sec. Max. e S(max) S(max) L ru Reflow - Temperature (TL) (Liquidus) +217°C tare Preheat Ramp-down - Temperature (t) 60-150 secs. pT L m S(min) Peak Temp (TP) +260(+0/-5)°C eT tS Time within 5°C of actual Peak Temp (t) 30 secs. Max. p 25 Ramp-down Rate 6°C/sec. Max. time to peak temperature Time Time 25°C to Peak Temp (T) 8 min. Max. (t 25ºC to peak) P Do not exceed +260°C Physical Specifications Environmental Specifications Lead Material Copper Alloy High Temp Voltage 80% Rated VDRM (VAC Peak ) +125°C or +150°C, 504 or 1008 hrs. MIL-STD-750 (Method 1040) JEDEC, Terminal Finish 100% Matte-Tin Plated Blocking JESD22-A-101 Body Material UL Recognized epoxy meeting flammability -65°C to +150°C, 15 min. dwell, 10 up to 100 classification V-0 Temp Cycling cycles. MIL-STD-750 (Method 1051) EIA/JEDEC, JESD22-A104 Biased Temp & 52 V (+85°C) 85%RH, 504 up to 1008 hrs. EIA/ DC Humidity JEDEC, JESD22-A-101 +150°C 1008 hrs. MIL-STD-750 (Method 1031) High Temp Storage JEDEC, JESD22-A-101 Low Temp Storage -65°C, 1008 hrs. 0°C to +100°C, 5 min. dwell, 10 sec. transfer, Thermal Shock 10 cycles. MIL-STD-750 (Method 1056) JEDEC, Part Marking JESD22-A-106 Autoclave (Pressure +121°C, 100%RH, 2atm, 24 up to 168 hrs. EIA/ Cooker Test) JEDEC, JESD22-A-102 Resistance to Solder +260°C, 30 secs. MIL-STD-750 (Method 2031) Heat Pxxxx Part Marking Code Moisture Sensitivity 85%RH, +85°C, 168 hrs., 3 reflow cycles (+260°C (Refer to Electrical Characteristics Table) Level Peak). JEDEC-J-STD-020, Level 1 xxxxx Date Code © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 02/05/20

Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 213 Series Dimensions — DO-214AA Inches Millimeters Case Pad Outline Dimensions B Temperature 0.079 Min Max Min Max D Measurement (2.0) A 0.130 0.156 3.30 3.95 Point B 0.201 0.220 5.10 5.60 0.110 C 0.077 0.087 1.95 2.20 C A (2.8) D 0.159 0.181 4.05 4.60 E 0.030 0.063 0.75 1.60 0.079 (2.0) inch F 0.075 0.096 1.90 2.45 (millimeter) G 0.002 0.008 0.05 0.20 H 0.077 0.104 1.95 2.65 H F K 0.006 0.016 0.15 0.41 E K G Part Numbering Packing Options Package Added Industry P xxx 2 S x L RP Description Quantity Type Suffix Standard S DO-214AA Tape & Reel 2500 RP EIA-481-D Type Reel Pack SIDACtor RoHS Compliant Median Voltage Construction Variable I Rating PP Package Type Tape and Reel Specification — DO-214AA 0.157 (4.0) 0.472 (12.0) 0.36 (9.2) 0.315 0.059 DIA Cover tape (8.0) (1.5) 12.99 (330.0) Dimensions are in inches 0.512 (13.0) (and millimeters). Arbor Hole Dia. Direction of Feed 0.49 (12.4) Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics. © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 02/05/20