8 7 6 5 4 3 2 1 NOTES 3MTM THREE-WALL HEADER, 3000 SERIES 1. REGULATORY INFORMATION: * MILITARY (WITH 3M'S N3518 POLARIZING KEY) ROHS COMPLIANT. SEE THE AND CENTERBUMP POLARIZATION. REGULATORY INFORMATION .100" X .100" LATCH/EJECTOR, STRAIGHT AND RIGHT ANGLE * LOW PROFILE. APPENDIX (RIA) IN THE * OPTIONAL EJECTOR LATCHES. "ROHS COMPLIANCE" SECTION * MOUNTING HOLES FOR SECURING HEADER TO BOARD. OF WWW.3MCONNECTORS.COM FOR * THREE WALL SHROUD PROVIDES DESIGN FLEXIBILITY. DIM. "A" COMPLIANCE INFORMATION. * SOLDER TAIL AND WRAP TAIL OPTIONS. * OPTIONAL POLARIZING POSTS AVAILABLE. 2 IN THE EVENT OF CONFLICT * HIGH TERMERATURE INSULATOR SUITABLE FOR "NO LEAD" BETWEEN THIS DATA AND THAT SOLDERING OPERATIONS. CONTAINED IN THE PRODUCT D D .68 * SUITABLE FOR REFLOW SOLDERING USING "PASTE IN HOLE" SPECIFICATION, THE PRODUCT TECHNIQUES. SPECIFICATION TAKES PRECEDENT. 17.4 3 NOTCHES A & C WILL ACCOMODATE 3M POLARIZING KEY: N3518). 4 MOUNTING HARDWARE: PHYSICAL: 2 FROM SOLDER SIDE OF PC BOARD -X0XX USE #4-24 THREAD CUTTING SCREW INSULATOR: (3M PART #3341-5) WITH HEADER WITHOUT LATCH EJECTOR MATERIAL: GLASS FILLED POLYESTER (PCT) .116 [2.95] MOUNTING HOLE. FLAMMABILITY: UL94V-0 FOR RIGHT ANGLE VERSION ONLY: COLOR: BLACK #2-56 BOLT AND NUT (3M PART CONTACT: #3341-6) WITH .106 [2.69] .424 .010 MATERIAL: COPPER ALLOY MOUNTING HOLE MAY BE USED. PLATING: 10.77 0.25 UNDER PLATING: 100 " [2.54 m] NICKEL-OVERALL 5 THE RECOMMENDED PCB HOLE SIZE WIPING AREA: 30 " [0.76 m] AVG. GOLD FOR THE KINKED TAIL POSITIONS SOLDER TAILS: 200 " [5.08 m] TIN LEAD OR MATTE TIN (SEE ORDERING INFORMATION) ON THE .112 SOLDER TAIL MARKINGS: 3M LOGO, PART IDENTIFICATION NUMBER AND ORIENTATION TRIANGLE CONNECTOR IS .035 .002. (SEE K2 VERSION). .97 .08 ELECTRICAL: 2.0 2 24.7 CURRENT RATING: 5.00A, 1 CONTACT POWERED C 3.00A, 6 CONTACTS POWERED C 1.75A, ALL CONTACTS POWERED RATING CONDITIONS: EIA-364-070 METHOD 2, 30 C MAXIMUM .37 9.5 TEMPERATURE RISE, 20% DERATED. REFERENCE APPROPRIATE -X2XX 3M PRODUCT SPECIFICATION FOR DETAILED CURRENT DERATING HEADER WITH SHORT LATCH EJECTOR CURVES. FOR 3M SOCKETS WITHOUT STRAIN RELIEF INSULATION RESISTANCE: >1 X 109 AT 500 V DC WITHSTANDING VOLTAGE: 1,000V AT SEA LEVEL RMS ENVIRONMENTAL: 2 N .573 .010 O TEMPERATURE RATING: -55 C TO 105 C HSI VI 14.55 0.25 PROCESS RATING: 260 C, PER J-STD-020C, SINGLE PASS RE MOISTURE SENSITIVITY LEVEL: 1 (PER J-STD-020C) 5 - 1 7 7 0 - 1.07 0R .08 0BE M 1U 2.0 5G N 27.2 -N 8WI A 7R D B B .46 11.7 -X3XX HEADER WITH LONG LATCH EJECTOR FOR 3M SOCKETS WITH STRAIN RELIEF ORDERING INFORMATION X3XXX-XXXXXX 0 H 60056 MAR 06,2015 JNC RS 0 N= HIGH TEMP BLACK (PCT)/(RB PLATING REQ'D) PLATING: : REVISE ORDERING 6 0 BLANK= (UB PLATING) NUMBER RB = 30 " [0.76 m] GOLD AND 200 " [5.08 m] MATTE TIN - DIMENSIONS: INCHES [MM] C (APP. E1 & C1 APPLY) [MM] IS REF. ONLY G 56068 AUG 05,2014 JNC RS T 3M PART NUMBER: U UB = 30 " [0.76 m] GOLD AND 200 " [5.08 m] REVISED AND REDRAWN (SEE TABLE 1) M TIN LEAD (APP. E3 & C2 APPLY) DESIGN REFERENCE NEXT ASSEMBLY REV ECO ISSUE DATE AND DESCRIPTION DRFT CHKD P ACCOCDEESSS DCRAFTSTIGLIONE DAAUTGE 05,2014 MFG DATE 3 PIN CONFIGURATION: TAIL: 5 A CHKD DATE APPVL DATE A 1 = RIGHT ANGLE SOLDER TAILS 02 = FOR .062 [1.57] THICK BOARD R. SCHERER SEP 05,2014 2: DIVISION DIVISION CODE C 3M COPYRIGHT 2015 1 2 = STRAIGHT SOLDER TAILS 03 = FOR .094 TO .125 [2.39 TO 3.18] THICK BOARD Interconnect Solutions EMSD 3M Center This document and the information it contains are 5 K2 = KINKED FOR .062 [1.57] THICK BOARD DO NOT SCALE TOLERANCES St. Paul, 3dMis ptrriobpuetertdy awnitdh moauyt 3nMo tp beerm reispsroiodnu,c eodr uosre fdu ortrh er 1 SCALE 2 EXCEPT AS MN 55144 disclosed other than for 3M authorized purposes. 0 NOTED All rights reserved. DRAWING 1 2 INCHES TITLE / 3M ELECTRONIC MATERIALS SOLUTIONS DIVISION LATCH/EJECTOR SYSTEM: 6 HEADER, 3-WALL, .100 .0 / INTERCONNECT SOLUTIONS 0 = NO LATCH/EJECTOR INSTALLED .00 .01 3 X .100 LATCH/EJECTOR, http://www.3mconnectors.com 2 = SHORT ROLL PIN LATCH/EJECTORS .000 .005 1 3 = LONG ROLL PIN LATCH/EJECTORS R THIRD ANGLE PROJECTION .0000 STRAIGHT & RA H. INTERPRET PER MILLIMETERS : 3M IS A TRADEMARK OF 3M COMPANY. ASME Y14.5 - 2009 0 d FOR TECHNICAL, SALES OR ORDERING MAX SURFACE ROUGHNESS .0 .3 CAGE SIZE DRAWING NO. REV. ge .00 .13 NUMBER 78-5100-0771-5 H a INFORMATION CALL 800-225-5373 UL FILE NO: E68080 ALL SURFACES .000 m MARKED ONLY ANGLES MODEL3000 SERIES DLIESTT.S YES NO SHT 1 OF 4 I 8 7 6 5 4 3 2 1

8 7 6 5 4 3 2 1 3MTM THREE-WALL HEADER, 3000 SERIES DIM. "D" .28 .100" X .100" LATCH/EJECTOR, STRAIGHT AND RIGHT ANGLE 7.1 .100 .020 .15 2.54 0.51 3.8 .100 D D 2.54 .25 .31 .025 .002 .025 .002 6.4 7.9 0.64 0.05 0.64 0.05 SQ. TYP. SQ. TYP. 2X .100 2.54 POSITION #1 SEE NOTE 4 DIM. "F" DIM. "B" .24 TYP. .24 6.2 "Y" 6.2 NOTCH "A" .30 .100 (SEE TABLE 1 & NOTE 3) .30 7.5 2.54 .16 7.5 NOTCH "B" (SEE TABLE 1) POSITION 1 4.1 ORIENTATION TRIANGLE NOTCH "C" A B "Y" DIM. "E" .010 (SEE TABLE 1 & NOTE 3) .049 DIM. "E" .010 TAIL C TAIL C DIM. "F" 1.24 B-B TYP. SECTION A-A SECTION (RIGHT ANGLE VERSION) (STRAIGHT VERSION) .68 .19 17.4 4.8 N O HSI VI E R 5 .12 3.0 - 1 2X .100 A B 7 7 0 .020 0.51 2.54 0-R 0BE M SEE NOTE 4 51G NU -N 8WI A 7R TABLE 1 .20 D DIM. "C" PIN 3M PART POLARIZING PIN 5.1 DIM. "A" DIM. "B" DIM. "C" DIM. "D" B QTY. NUMBER NOTCHES QTY. B DIM. "A" 10 3793 1.26 [32.1] 1.105 [28.04] .865 [21.97] .71 [18.0] BC 10 14 3314 1.46 [37.2] 1.305 [33.12] 1.065 [27.05] .91 [23.1] BC 14 16 3408 1.56 [39.7] 1.405 [35.66] 1.165 [29.59] 1.01 [25.6] ABC 16 20 3428 1.76 [44.8] 1.604 [40.74] 1.365 [34.67] 1.21 [30.7] ABC 20 26 3429 2.06 [52.4] 1.905 [48.36] 1.665 [42.29] 1.51 [38.3] ABC 26 34 3431 2.46 [62.6] 2.305 [58.52] 2.065 [52.45] 1.91 [48.5] ABC 34 40 3432 2.76 [70.2] 2.605 [66.14] 2.365 [60.07] 2.21 [56.1] ABC 40 50 3433 3.26 [82.9] 3.105 [78.84] 2.865 [72.77] 2.71 [68.8] ABC 50 60 3372 3.76 [95.6] 3.605 [91.54] 3.365 [85.47] 3.21 [81.5] ABC 60 64 3764 3.96 [100.7] 3.805 [96.62] 3.565 [90.55] 3.41 [86.6] ABC 64 0 H 60056 MAR 06,2015 JNC RS 0 : REVISE ORDERING 6 0 NUMBER - C G 56068 AUG 05,2014 JNC RS T U REVISED AND REDRAWN M DESIGN REFERENCE NEXT ASSEMBLY REV ECO ISSUE DATE AND DESCRIPTION DRFT CHKD P TABLE 2 ACCOCDEESSS DCRAFTSTIGLIONE DAAUTGE 05,2014 MFG DATE 3 5 A 3M PART CHKD DATE ARPP. VSLCHERER DSAETEP 05,2014 A2: NUMBER CONTACT TAIL DIM. "E" PIN CROSS SECTION DIM. "G" DIVISION DIVISION CODE C 3M COPYRIGHT 2015 1 SUFFIX InDteOr cNoOnnTect SoSluCtAioLEns EMTSODLERANCES 3SMt .C Peantuelr, T3dMhis ipstrr idobopuceutermtdye nawtn iatdhn mod autyht 3neM oi ntp fbeoerrm mreiasptsrioioodnnu ,c ieotd rc uoosnre tfdau inortsrh aerre 15 SCALE 4 EXCEPT AS MN 55144 disclosed other than for 3M authorized purposes. 0 NOTED All rights reserved. -1XX2 .062 [1.57] THICK DIM. "F" DIAGONALS CORNER RADII .035+/-.003 [.89] DRAWING 1 2 .112 [2.84] INCHES TITLE / 6 PC BOARD .0245+/-.0005 [.622] .028+/-.001 [.71] .0075 REF. [.191] SEE NOTE 5 .0 HEADER, 3-WALL, .100 / -2XX2 3 .00 .01 X .100 LATCH/EJECTOR, .000 .005 1 .094 [2.39] TO -1X03 THIRD ANGLE PROJECTION .0000 . H .125 [3.18] THICK .155 [3.94] .0245+/-.0005 [.622] .028+/-.001 [.71] .0075 REF. [.191] .035+/-.003 [.89] STRAIGHT & RA INTERPRET PER MILLIMETERS : -2X03 PC BOARD ASME Y14.5 - 2009 0 d .0 .3 e MAX SURFACE ROUGHNESS CAGE SIZE DRAWING NO. REV. g .00 .13 NUMBER 78-5100-0771-5 H a ALL SURFACES .000 m MARKED ONLY ANGLES MODEL3000 SERIES DLIESTT.S YES NO SHT 2 OF 4 I 8 7 6 5 4 3 2 1

8 7 6 5 4 3 2 1 3MTM THREE-WALL HEADER, 3000 SERIES .100" X .100" LATCH/EJECTOR, STRAIGHT AND RIGHT ANGLE DIM. "G" DIM. "G" .41 10.4 .300 7.62 MIN. AFTER PLATING AFTER PLATING TYP. MAX TO EDGE OF PCB SIDE TO SIDE TYP. D FOR DAISY CHAIN D STACKABILITY "Y" "Y" .060 .100 .003 .100 .003 .029 1.52 2.54 0.08 2.54 0.08 0.74 2X .106 OR .116 2X .106 OR .116 [2.95] [2.95] 2.69 2.69 (SEE NOTE 4) (SEE NOTE 4) .100 .003 2.54 0.08 .232 .100 .003 POSITION #1 .352 POSITION #1 5.91 2.54 0.08 8.95 DIM. "B" DIM. "C" RECOMMENDED MOUNTING HOLE PATTERN RECOMMENDED MOUNTING HOLE PATTERN (STRAIGHT VERSION) (RIGHT ANGLE VERSION) C C (K2) OPTION PART CUSTOMIZATION POLARIZING POST POLARIZING KEY 2500 & 3000 SERIES SHROUDED HEADER THIS SPEC SHEET DETAILS OUR STANDARD OFFERING. NO. OF BREAKAWAY TOTAL NO. TAILS POSITIONS KINKED 3M HAS SEVERAL CAPABILITIES THAT CAN PROVIDE A PART TAILORED OF PINS TAB KINKED TO YOUR SPECIFIC NEEDS. ASK YOUR 3M SALES REPRESENTATIVE N O OR CUSTOMER SERVICE FOR MORE DETAILS. 10 4 3 4 7 8 HSI VI .102 14 4 3 4 11 12 RE BOTH SNAP-IN AND ROLL PIN LATCHES MAY BE ORDERED SEPARATELY. .321 2.59 16 4 3 4 13 14 5 - 1 SNAP-IN AND ROLL PIN STYLE LATCHES ARE DIMENSIONALLY AND 20 4 3 4 17 18 8.15 7 FUNCTIONALLY EQUIVALENT. IF ORDERING SNAP-IN OR ROLL PIN STYLE 26 4 3 4 23 24 7 0 LATCHES SEPARATELY, PLEASE USE THE BELOW CHART. .09 - 34 4 7 8 27 28 0R 0BE M 40 4 7 8 33 34 2.3 1U 5G N MATERIAL SHORT LATCH LONG LATCH LATCH STYLE COLOR 50 4 7 8 43 44 8-WIN A 7R HIGH TEMP. (PCT) N3505-2B N3505-3B ROLL PIN BLACK 60 4 11 12 49 50 D HIGH TEMP (PPA) N3505-30B N3505-31B SNAP-IN BLACK 64 4 11 12 53 54 .34 B B * SELECTIVE PIN REMOVAL (ATA OR OTHER COMPATABILITY) 8.5 3M PART NO. MATERIAL COLOR * WIRE WRAP TAILS STYLE KINKED TAIL DETAIL: 3201-4 LCP BLACK - KINK IS LOCATED .05" BELOW BOTTOM SURFACE OF PLASTIC. NOTE: - EXTERNAL RADIUS OF KINK TOWARD PART .15 DIM. "A" INSERT POST INTO ONE MOUNTING CENTERLINE. HARDWARE HOLE ON BOTTOM OF HEADER. 3.8 SET POST TO PROTRUDE .115 [2.92] 3M PART NO. MATERIAL COLOR DIM. "A" N3518 LCP BLACK .02 NOTE: #2216 B/A SCOTCHWELD CAN BE USED TO ADHERE KEYS. 0 H 60056 MAR 06,2015 JNC RS 0 : REVISE ORDERING 6 0 NUMBER - C G 56068 AUG 05,2014 JNC RS T LONG SHORT U .03 REVISED AND REDRAWN M DESIGN REFERENCE NEXT ASSEMBLY REV ECO ISSUE DATE AND DESCRIPTION DRFT CHKD P SNAP-IN LATCHES 0.8 ACCOCDEESSS DCRAFTSTIGLIONE DAAUTGE 05,2014 MFG DATE 53 A CHKD DATE APPVL DATE A R. SCHERER SEP 05,2014 2: TYP. DIVISION DIVISION CODE C 3M COPYRIGHT 2015 1 NOTE: Interconnect Solutions EMSD 3M Center This document and the information it contains are 5 SNAP-IN LATCHES CAN ONLY BE ORDERED DO NOT SCALE TOLERANCES St. Paul, 3dMis ptrriobpuetertdy awnitdh moauyt 3nMo tp beerm reispsroiodnu,c eodr uosre fdu ortrh er 1 SCALE 4 EXCEPT AS MN 55144 disclosed other than for 3M authorized purposes. 0 NOTED All rights reserved. SEPARATELY AND ARE THE CUSTOMERS DRAWING 1 2 INCHES TITLE / RESPONSIBILITY TO INSTALL. 6 HEADER, 3-WALL, .100 .0 / 3 .00 .01 X .100 LATCH/EJECTOR, .000 .005 1 THIRD ANGLE PROJECTION .0000 . H STRAIGHT & RA INTERPRET PER MILLIMETERS : ASME Y14.5 - 2009 0 d .0 .3 e MAX SURFACE ROUGHNESS CAGE SIZE DRAWING NO. REV. g .00 .13 NUMBER 78-5100-0771-5 H a ALL SURFACES .000 m MARKED ONLY ANGLES MODEL3000 SERIES DLIESTT.S YES NO SHT 3 OF 4 I 8 7 6 5 4 3 2 1

8 7 6 5 4 3 2 1 3MTM THREE-WALL HEADER, 3000 SERIES .100" X .100" LATCH/EJECTOR, STRAIGHT AND RIGHT ANGLE D D MOUNTING HARDWARE STRAIGHT VERSION INSTALL .50 .31 (MUST BE INSERTED PRIOR TO LATCH INSTALL) 12.7 7.9 RIGHT ANGLE VERSION INSTALL 3341-5 (INSTALL FROM BOTTOM OF BOARD) PANHEAD THREAD CUTTING SCREW: #4-24 X 5/16" 3341-6 C TYPE: USA STD BT, FEDERAL BG C MATERIAL: STAINLESS STEEL HEX HEAD BOLT, NUT AND WASHER: BOLT - #2-56 X 1/2" MATERIAL: STAINLESS STEEL 3341-6 #2-56 NUT AND BOLT TORQUE FOR EACH BOLT: 1.25 - 3.125 INCH LBS. N O HSI VI E R 5 - 1 7 7 0 - 0R 0BE M 1U 5G N -N 8WI A 7R #4-24 TYPE BT SELF THREADING SCREW D WHEN USING LATCHES, MAXIMUM LENGTH OF SCREW IS .250 INCHES PLUS B B THICKNESS OF THE BOARD. TORQUE FOR EACH SCREW IS 3-5 INCH LBS. 3341-5 0 H 60056 MAR 06,2015 JNC RS 0 : REVISE ORDERING 6 0 NUMBER - C G 56068 AUG 05,2014 JNC RS T U REVISED AND REDRAWN M DESIGN REFERENCE NEXT ASSEMBLY REV ECO ISSUE DATE AND DESCRIPTION DRFT CHKD P ACCOCDEESSS DCRAFTSTIGLIONE DAAUTGE 05,2014 MFG DATE 3 5 A CHKD DATE APPVL DATE A R. SCHERER SEP 05,2014 2: DIVISION DIVISION CODE C 3M COPYRIGHT 2015 1 Interconnect Solutions EMSD 3M Center This document and the information it contains are 5 DO NOT SCALE TOLERANCES St. Paul, 3dMis ptrriobpuetertdy awnitdh moauyt 3nMo tp beerm reispsroiodnu,c eodr uosre fdu ortrh er 1 SCALE 4 EXCEPT AS MN 55144 disclosed other than for 3M authorized purposes. 0 NOTED All rights reserved. DRAWING 1 2 INCHES TITLE / 6 HEADER, 3-WALL, .100 .0 / 3 .00 .01 X .100 LATCH/EJECTOR, .000 .005 1 THIRD ANGLE PROJECTION .0000 . H STRAIGHT & RA INTERPRET PER MILLIMETERS : ASME Y14.5 - 2009 0 d .0 .3 e MAX SURFACE ROUGHNESS CAGE SIZE DRAWING NO. REV. g .00 .13 NUMBER 78-5100-0771-5 H a ALL SURFACES .000 m MARKED ONLY ANGLES MODEL3000 SERIES DLIESTT.S YES NO SHT 4 OF 4 I 8 7 6 5 4 3 2 1

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: 3 M: 3314-2002 3372-1002 3408-1002 3429-1003 3429-2002 3431-1003 3431-2003 3432-1003 3432-2003 3433- 1002 3433-2003 3793-1003 3793-2002 3793-2003 3314-2202 3314-2302 3372-1202 3372-1302 3372-1303 3408-1203 3408-1303 3428-2203 3431-1303 3431-2302 3432-1303 3432-2203 3433-1203 3433-2203 3764-1202 3764-2202 N3314-1202RB N3314-2303RB N3408-1202RB N3408-1302RB N3408-2202RB N3428-1002RB N3428-1202RB N3428-1302RB N3428-2002RB N3428-2003RB N3428-2202RB N3428-2302RB N3428-2303RB N3429-1302RB N3429-1303RB N3429-2302RB N3429-2303RB N3431-1002RB N3431-1202RB N3431-1302RB N3431-1303RB N3431-2303RB N3432-1002RB N3432-1202RB N3432-1302RB N3432-2202RB N3432-2303RB N3433-1202RB N3433-1302RB N3433-1303RB N3433-2202RB N3433-2302RB N3433-2303RB N3793-1202RB N3793-2202RB N3793-2302RB 3314-1303 3314-2303 3372-2302 3408-1302 3408-2303 3428-1302 3428-2303 3429-1202 3429-1303 3429-2303 3431-1302 3431-2303 3432-1302 3432-2202 3432-2302 3432-2303 3433-1202 3433-2303 3793-1303 3793-2202 3793-2303 957631-30 3433-1303 N3314-1002RB N3314-2203RB N3314- 2302RB N3372-1002RB N3372-2002RB N3372-2202RB N3372-2302RB N3408-1003RB N3408-1203RB N3408- 2002RB N3408-2203RB