Scotchlok™ Terminals MNU18-250DMI, MNU14-250DMI, WW´´ W MNU10-250DMI D Male Disconnect, Nylon Fully Insulated, Butted Seam L Data Sheet Wire MaleTab Maximum Product Range Width(W´) Barrel Barrel Insulation Number (AWG) xThickness L W D Length I.D. Diameter MNU18-250DMI 22-18 0.250x0.032 0.95 0.44 0.30 0.25 0.065 0.145 MNU14-250DMI 16-14 0.250x0.032 0.95 0.44 0.30 0.25 0.085 0.170 MNU10-250DMI 12-10 0.250x0.032 1.05 0.47 0.39 0.25 0.150 0.250 Installation Information (cid:2)WARNING CANADIAN STANDARDS Turn power off before installing or removing terminal.All electrical UNDERWRITERS ASSOCIATION work should be done according to appropriate electrical codes. LABORATORIES STANDARD NO. C22.2 STANDARD NO. UL 310 NO. 153 3M FILE NO. E70512 3M FILE NO. LR22190 ULListed and CSACertified for use on stranded copper (AWG) wire only. Strip away the end 3/8 inch of wire insulation. Make the crimp in the proper station of a recommended 3M crimp tool:TH-440,TH-450 (scissor style),or TR-490 (ratchet style) hand tools. Specifications Wire Size: See Table Above Barrel Seam: Butted Barrel Crimp (Required) Max. Voltage Rating: 600 V Building Wire 1000 V Signs or Fixtures (Luminaires) Max. Temperature Rating: 221˚F (105˚C) Max. Current: Same as Wire Suitable for factory application on steel or brass tabs UL Insulator Material: Nylon or CSA. Terminal Material: ETP Copper Suitable for field application on brass tabs,strain relief Plating: Tin required,UL only.

Engineering Specification Crimp-Type Male Quick-Slide Connectors shall, The Nylon Insulated 0.250˝ Male Disconnect shall be electrically and mechanically connect permanently to tin plated 0.032˝ thick copper,with a 0.250˝ blade the prestripped end of a stranded copper wire and, conforming to ANSI/NEMA DC-2 dimension and a have a flat rectangular tongue portion for mating to a 0.25˝ long barrel covered by a molded nylon sleeve, Female Disconnect in a separable,reusable manner, color coded,and sized for a specified (AWG) wire forming a Quick Connect Wiring Connection. range (22-18,16-14,12-10). The connector line shall offer tongue variations (size Insulated connectors shall be ULListed and CSA 0.250 x 0.032 or 0.187 x 0.020 per ANSI/NEMA Certified for 600 volts maximum,building wire:1000 DC-2) and barrel variations in wire size 22-18 AWG, volts maximum,signs and fixtures (luminaires). The 16-14 AWG,12-10 AWG and construction of non- connector shall be temperature rated 221˚F (105˚C) insulated,vinyl insulated nylon fully insulated,etc. maximum. The Quick-Slide Connectors shall have regulatory Quick Slide Connectors shall be suitable for field or agency coverage (UL Listing,CSACertification). The factory wiring,with a ULRecognized strain relief tongue shall be marked with the wire range and the required. manufacturer’s symbol. ((cid:2)) 3M and Scotchlok are trademarks of 3M. is a trademark of Underwriters Laboratories. is a trademark of Canadian Standards Association. IMPORTANT NOTICE Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Warranty;Limited Remedy;Limited Liability. This product will be free from defects in material and manufacture as of the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING,BUT NOT LIMITED TO,ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law,3M will not be liable for any loss or damage arising from this 3M product,whether direct,indirect,special,incidental or consequential regardless of the legal theory asserted. Electrical Products Division 6801 River Place Blvd. Austin,TX 78726-9000 Litho in USA. http://www.3M.com/elpd ©3M 2002 78-8125-9873-4-A