METAL CAP TYPE MULTILAYER CERAMIC CAPACITORS NTJ RoHS Series Compliant ◆FEATURES 1. Small size and large capacitance, high ripple current. 2. Temperature cycle: 1000 cycles. 3. X7R temperature characteristics. 4. Excellent noise absorption. 5. For reflow soldering use. 6. Suitable for aluminum substrate. ◆APPLICATIONS 1. Smoothing circuit of switching mode AC-DC or DC-DC converter. 2. On-board power supply. 3. Noise suppressor for various kinds of equipments. ◆CUSTOM MADE PRODUCTS We can offer custom made one element metal cap type capacitors for request of customers. Please contact us if you have questions for details. ◆CONSTRUCTION Chip Ceramic Capacitor Metal Cap, Tin plating Pb-free Soldering Termination ◆RATINGS 1. Category Temperature Range -55〜+125℃ 2. Rated Voltage Range 25, 50, 100, 250Vdc 3. Rated Capacitance Range 1.0 to 100µF 4. Rated Capacitance Tolerance M(±20%) 5. Temperature Characteristics X7R 6. Rated Ripple Current See No.5 on the following table ◆SPECIFICATIONS No. Items Specification Test Condition 1 Withstand Voltage No abnormality. 250% of rated voltage shall be applied for 5 seconds. (Only 250Vdc products : 475V) 2 Insulation Resistance 100/CR(MΩ) or 4000(MΩ) whichever Rated voltage shall be applied for 60±5 seconds at is less. temperature 25±2℃. 3 Rated Capacitance Within specified tolerance. CR≦10µF CR>10µF Temperature 25±2℃ 4 Dissipation Factor 5.0% maximum Frequency 1±0.1kHz 120±12Hz Voltage 1±0.2Vrms 0.5±0.2Vrms 5 Rated Ripple Current Size 55 76 10kHz〜1MHz (sine curve) Element 1 2 1 2 Ripple voltage Vp shall be less than Arms 2.0 3.0 3.0 4.0 the rated voltage. As customer requirement, Chemi-Con has submits the test results according to AEC-Q200 for Multilayer ceramic capacitors. Please contact us for more information. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 20 CAT. No. E1002V

METAL CAP TYPE MULTILAYER CERAMIC CAPACITORS NTJ Series ◆SPECIFICATIONS No. Items Specification Test Condition 6 Temperature Cycle Appearance : No visible damage. Step Temperature (℃) (min.) ΔC/C : ±15% 1 Min. Category temperature ±3 30±3 D.F. : To meet the initial specification. 2 Room temperature 3 max. I.R. : To meet the initial specification. 3 Max. Category temperature ±3 30±3 4 Room temperature 3 max. <Cycle> 1000 cycles 7 Humidity Load Life Appearance : No abnormality. Temperature : 40±2℃ ΔC/C : ±20% Humidity : 90 to 95%RH D.F. : 10% max. Voltage : Rated voltage I.R. : 25/CR(MΩ) or 1000(MΩ) Time : 500±2 4 hours 0 whichever is less. 8 Endurance Appearance : No abnormality. Temperature : 125±3℃ ΔC/C : ±20% Voltage : Rated voltage D.F. : 10% max. Time : 1000±4 8 hours 0 I.R. : 50/CR(MΩ) or 1000(MΩ) whichever is less. *CR : Rated Capacitance(µF) ◆Note of mountig for NTJ series. 1. The gap of capacitor and a substrate shall be the mounting face. 2. To prevent degredation of temperature cycling capability, if need to be careful about amount of solder that would not go into the inner side of terminations. Substrate Gap Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 21 CAT. No. E1002V

METAL CAP TYPE MULTILAYER CERAMIC CAPACITORS NTJ Series ◆STANDARD RATINGS Dimensions(mm) Maximum Taping Rated voltage Rated Capacitance Element ripple current Part Number Quantity per reel (Vdc) (µF) L W Tmax. a (Arms) (pcs. / reel) 33 6.0±0.4 5.3±0.4 3.8 1.3±0.3 1 2.0 KTJ250B336M55AFT00 400 33 KTJ250B336M55BFT00 2,000 6.0±0.4 5.3±0.4 5.5 1.3±0.3 2 3.0 25 47 KTJ250B476M55BFT00 2,000 47 7.8±0.5 6.6±0.5 5.5 1.5±0.3 1 3.0 KTJ250B476M76AFT00 1,200 68 8.5 KTJ250B686M76BFT00 500 7.8±0.5 6.6±0.5 1.5±0.3 2 4.0 100 9.5 KTJ250B107M76BFT00 400 15 6.0±0.4 5.3±0.4 3.8 1.3±0.3 1 2.0 KTJ500B156M55AFT00 400 15 KTJ500B156M55BFT00 2,000 6.0±0.4 5.3±0.4 5.5 1.3±0.3 2 3.0 22 KTJ500B226M55BFT00 2,000 50 22 7.8±0.5 6.6±0.5 5.5 1.5±0.3 1 3.0 KTJ500B226M76AFT00 1,200 33 KTJ500B336M76BFT00 500 7.8±0.5 6.6±0.5 8.5 1.5±0.3 2 4.0 47 KTJ500B476M76BFT00 500 4.7 6.0±0.4 5.3±0.4 3.8 1.3±0.3 1 2.0 KTJ101B475M55AFT00 400 6.8 KTJ101B685M55BFT00 2,000 6.0±0.4 5.3±0.4 5.5 1.3±0.3 2 3.0 100 10 KTJ101B106M55BFT00 2,000 6.8 7.8±0.5 6.6±0.5 5.5 1.5±0.3 1 3.0 KTJ101B685M76AFT00 1,200 15 7.8±0.5 6.6±0.5 8.5 1.5±0.3 2 4.0 KTJ101B156M76BFT00 500 1.0 6.0±0.4 5.3±0.4 3.8 1.3±0.3 1 2.0 KTJ251B105M55AFT00 400 1.5 5.5 KTJ251B155M55BFT00 2,000 6.0±0.4 5.3±0.4 1.3±0.3 2 3.0 250 2.2 6.5 KTJ251B225M55BFT00 2,000 2.2 7.8±0.5 6.6±0.5 5.5 1.5±0.3 1 3.0 KTJ251B225M76AFT00 1,200 3.3 7.8±0.5 6.6±0.5 8.5 1.5±0.3 2 3.0 KTJ251B335M76BFT00 500 ※Please consult with us when you consider the rating other than a standard table. ◆PART NUMBERING SYSTEM ◆DIMENSIONS 1 2 3 4 5 6 78 9 10 11 12 13 14 15 16 17 18 K TJ 250 B 476 M 55 BF T 00 Supplement code T T Taping code Terminal code Size code Capacitance tolerance code a a W W Nominal Capacitance code Temperature characteristics code Rated voltage code L L Series code Category 1 Element 2 Elements Please refer to"Part Numbering System" of the beginning of a catalog for the details. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 22 CAT. No. E1002V