8 7 6 5 4 3 2 1 NOTES 3MTM ROUND SHIELDED/JACKETED, FLAT CABLE, HF659 SERIES * LOW SMOKE ZERO HALOGEN (LSZH) INSULATION. 1. REGULATORY INFORMATION: .050" 28 AWG STRANDED, MASS TERMINATABLE, HALOGEN FREE PO/PO ADVANTAGES OF LSZH INSULATION ARE THE LOW VISIT 3M.com/regs OR CONTACT SMOKE (IEC 61034-2-2005) AND LOW TOXICITY YOUR 3M REPRESENTATIVE TO FIND OF COMBUSTION GASES (NF X 70-100-2-2006), THE RoHS COMPLIANCE STATUS OF 2.4 61 REDUCING THE RISK TO FIREFIGHTERS AND THE 3M PART YOU ARE INTERESTED REDUCING THE SOOT AND CORROSION DAMAGE TO IN. NEARBY EQUIPMENT. SPLIT 1.0 25 2 IN THE EVENT OF CONFLICT POLYESTER * ROUND CONSTRUCTION PERMITS MORE EASY ROUTING. BETWEEN THIS DATA AND THAT FILM FOIL .035 .005 [.89] BONDED CONTAINED IN THE PRODUCT PO JACKET THICKNESS * 28 AWG WIRE ON .050 INCH CENTERS PERMITS MASS SPECIFICATION, THE PRODUCT D D PAPER TERMINATION TO BROAD LINE OF IDC CONNECTORS. SPECIFICATION TAKES PRECEDENT. PAPER (MFG OPTION) * CONTINUOUS SPLIT/BOND REPEAT ALLOWS FOR MASS 3 BLUE MARKING ON ONE EDGE OF TERMINATIONS OF IDC CONNECTORS. PRIMARY CABLE DESIGNATES WIRE #1. * DUAL SHIELDING PROVIDES 35 db AVERAGE SHIELDING. DIM. "B" 4 DIMENSION "B" PERTAINS TO DIM. "A" BONDED AREA ONLY. SEE NOTE 4 * PRIMARY CABLE IS ZIPPABLE FOR BRANCHING OR DISCRETE TERMINATION. PO PRIMARY INSULATION BRAID PO JACKET BRAID .050 TYP. POLYESTER CONDUCTORS FILM FOIL 1.27 PO PRIMARY INSULATION ORDERING INFORMATION HF659/XX XX XX C PHYSICAL: C 2 JACKET MATERIAL: HALOGEN FREE POLYOLEFIN (PO) NUMBER OF CONDUCTORS BLANK = STANDARD COLOR: DARK GRAY (SEE TABLE 1) SF = SPLICE FREE PRIMARY MATERIAL: HALOGEN FREE POLYOLEFIN (PO) COLOR: DARK GRAY BLANK = STANDARD SO = CONTINUOUSLY BONDED WIRE (NO SPLIT) MARKING: STANDARD: NONE CONDUCTORS: 28 AWG, 7 X 36 AWG [7 X .127] TINNED STRANDED COPPER NOTE: SHIELDING: .001 [.03] THICK ALUMINUM/POLYESTER FILM FOIL AND 90% AVAILABLE IN STANDARD 275FT ROLLS. CONTACT 3M COVERAGE TINNED COPPER BRAID. FOR AVAILABILITY OF ADDITIONAL CONDUCTOR COUNTS N AND/OR CUSTOM ROLL LENGTHS. O FSI ELECTRICAL: EVI 2 R 7 VOLTAGE RATING: USA 150V CANADIAN 150V EU: <50V - 5 INSULATION RESISTANCE: (PRIMARY CABLE) >1 X 1010 /10ft. [3m] 3 3 2 UNBALANCED BALANCED 0-R CHARACTERISTIC IMPEDANCE: 54 107 0MBE 1U CAPACITANCE: 28.7 pF/ft [84.2 pF/m] 14.4 pF/ft [47.2 pF/m] 5G N TABLE 1 INDUCTANCE: .08 H/ft [.27 H/m] .16 H/ft [.52 H/m] 8-AWIN 7R D NO. OF 3M PART PROPAGATION DELAY: 1.55 ns/ft [4.95 ns/m] 1.54 ns/ft [4.95 ns/m] DIM. "A" DIM. "B" CONDUCTORS NUMBER VELOCITY OF PROPAGATION: 66% 66% B 09 HF659/09 .25 [6.4] .40 [10.2] NOTE: UNBALANCED IS MEASURED BETWEEN GROUND-SIGNAL-GROUND CONDUCTORS. B 10 HF659/10 .25 [6.4] .45 [11.4] BALANCED IS MEASURED BETWEEN CONDUCTORS WITHIN A PAIR. "MEASURED VALUES ARE TYPICAL" 14 HF659/14 .30 [7.6] .65 [16.5] 15 HF659/15 .30 [7.6] .70 [17.8] ENVIRONMENTAL: 2 16 HF659/16 .30 [7.6] .75 [19.1] 6 20 HF659/20 .33 [8.4] .95 [24.1] TEMPERATURE RATING: -40 C TO +105 C (EIA-364-32G, METHOD A, TEST CONDITION 2) ) s -15 C TO +75 C (UL TEMPERATUE RATING) 24 HF659/24 .34 [8.6] 1.15 [29.2] r h ( 25 HF659/25 .34 [8.6] 1.20 [30.5] FLAMMABILITY RATING: INTERNAL: HORIZONTAL FLAME PER UL758 t e 26 HF659/26 .34 [8.6] 1.25 [31.8] EXTERNAL: CABLE FLAME (VERTICAL) PER UL758 s f 30 HF659/30 .37 [9.4] 1.45 [36.8] f O 34 HF659/34 .37 [9.4] 1.65 [41.9] HALOGEN FREE IS DEFINED AS BOTH 1) NO HALOGN COMPOUNDS THAT ARE INTENTIONALLY ADDED TO THE C T 36 HF659/36 .41 [10.4] 1.75 [44.5] PRODUCT OR USED IN THE MANUFACTURING PROCESS FOR THE PRODUCT AND 2) ANY IMPURITIES PRESENT U F 86110 AUG 19,2019 JNC SAN ARE LESS THAN 900ppm BROMINE, LESS THAN 900ppm CHLORINE AND/OR LESS THAN 1500ppm TOTAL - 37 HF659/37 .41 [10.4] 1.80 [45.7] REVISE NOTES - BROMINE AND CHLORINE. THE LATTER ARE THE LEVELS SET FORTH IN CERTIAN INDUSTRY STANDARDS FOR 40 HF659/40 .41 [10.4] 1.95 [49.5] 9 PRINTED CIRCUIT BOARDS, SUCH AS THE INTERNATIONAL ELECTROTECHNICAL COMMISSION (IEC) 61249-2-21 E 80157 AUG 01,2018 JNC BM 1 0 50 HF659/50 .45 [11.4] 2.45 [62.2] STANDARDS. THIS INFORMATION REPRESENTS 3M'S KNOWLEDGE AND BELIEF WHICH MAY BE BASED IN WHOLE REVISED ELECTRICAL & 2 OR IN PART ON INFORMATION PROVIDED BY 3RD PARTY SUPPLIERS TO 3M. ENVIRONMENTAL NOTES / 60 HF659/60 .48 [12.2] 2.95 [74.9] 8 D 79295 MAY 29,2018 JNC BM 2 64 HF659/64 .48 [12.2] 3.15 [80.0] 8/ REVISED AND REDRAWN e DESIGN REFERENCE NEXT ASSEMBLY REV ECO ISSUE DATE AND DESCRIPTION DRFT CHKD m ACCOCDEESSS DCRAFTSTIGLIONE DMAATEY 29,2018 MFG DATE Ti A CHKD DATE APPVL DATE Ad B. MIZE MAY 29,2018 r a DIVISION DIVISION CODE C 3M COPYRIGHT 2019 d EMSD 3M Center This document and the information it contains are n DO NOT SCALE TOLERANCES St. Paul, 3dMis ptrriobpuetertdy awnitdh moauyt 3nMo tp beerm reispsroiodnu,c eodr uosre fdu ortrh er a SCALE EXCEPT AS MN 55144 disclosed other than for 3M authorized purposes. t NOTED All rights reserved. S DRAWING INCHES TITLE l a 3M ELECTRONICS MATERIALS SOLUTIONS DIVISION .0 RD SHIELDED/JACKETED, r INCH [MM] .00 t INTERCONNECT SOLUTIONS R .000 FLAT CABLE, HF659 n e http://www.3M.com/interconnect TOLERANCE - UNLESS NOTED THIRD ANGLE PROJECTION .0000 C SERIES .X .XX .XXX INTERPRET PER MILLIMETERS : ASME Y14.5 - 2009 0 d 3M IS A TRADEMARK OF 3M COMPANY. [INCH] .1 .05 .010 .0 e FOR TECHNICAL, SALES OR ORDERING UL FILE NO: E42769, [] = DIM. FOR REFERENCE ONLY MAX SURFACE ROUGHNESS .00 NCUMAGBEER SIZE7DR8AWIN-G5 NO1. 00-2335-7 RFEV. ag INFORMATION CALL 800-225-5373 UL STYLE NO: 22170 ALL SURFACES .000 m MARKED ONLY ANGLES MODELHF659 DLIESTT.S YES NO SHT 1 OF 2 I 8 7 6 5 4 3 2 1

8 7 6 5 4 3 2 1 3MTM ROUND SHIELDED/JACKETED, FLAT CABLE, HF659 SERIES .050" 28 AWG STRANDED, MASS TERMINATABLE, HALOGEN FREE PO/PO D D Regulatory: For regulatory information about this product, visit 3M.com/regs or contact your 3M representative. Technical Information: The technical information, recommendations and other statements contained in this document are based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed. Product Use: Many factors beyond 3M's control and uniquely within user's control can affect the use and performance of a 3M product in a particular application. Given the variety of factors that can affect the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user's C C method of application. Warranty, Limited Remedy, and Disclaimer: Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OR TRADE. If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M's option, replacement of the 3M product or refund of the purchase price. N O FSI VI Limitation of Liability: Except where prohibited by law, 3M will not be liable for E R any loss or damage arising from the 3M product, whether direct, indirect, special, 7 incidental or consequential, regardless of the legal theory asserted, including - 5 warranty, contract, negligence or strict liability. 3 3 2 - 0R 3M Company 0MBE 1U Electronics Materials Solutions Division 5G N -N 13011 McCallen Pass, Bldg. C 8AWI 7R D Austin, TX 78753-5380 1-800-225-5373 www.3M.com/interconnect B B 6 ) s r h ( t e s f f O C T U F 86110 AUG 19,2019 JNC SAN - REVISE NOTES - 9 E 80157 AUG 01,2018 JNC BM 1 0 REVISED ELECTRICAL & 2 ENVIRONMENTAL NOTES / 8 D 79295 MAY 29,2018 JNC BM 2 / 8 REVISED AND REDRAWN e DESIGN REFERENCE NEXT ASSEMBLY REV ECO ISSUE DATE AND DESCRIPTION DRFT CHKD m ACCOCDEESSS DCRAFTSTIGLIONE DMAATEY 29,2018 MFG DATE Ti A CHKD DATE APPVL DATE Ad B. MIZE MAY 29,2018 r a DIVISION DIVISION CODE C 3M COPYRIGHT 2019 d EMSD 3M Center This document and the information it contains are n DO NOT SCALE TOLERANCES St. Paul, 3dMis ptrriobpuetertdy awnitdh moauyt 3nMo tp beerm reispsroiodnu,c eodr uosre fdu ortrh er a SCALE EXCEPT AS MN 55144 disclosed other than for 3M authorized purposes. t NOTED All rights reserved. S DRAWING INCHES TITLE l a 3M ELECTRONICS MATERIALS SOLUTIONS DIVISION .0 RD SHIELDED/JACKETED, r .00 t INTERCONNECT SOLUTIONS .000 FLAT CABLE, HF659 n e http://www.3M.com/interconnect THIRD ANGLE PROJECTION .0000 C SERIES INTERPRET PER MILLIMETERS : ASME Y14.5 - 2009 0 d 3M IS A TRADEMARK OF 3M COMPANY. e .0 FOR TECHNICAL, SALES OR ORDERING MAX SURFACE ROUGHNESS .00 NCUMAGBEER SIZE7DR8AWIN-G5 NO1. 00-2335-7 RFEV. ag INFORMATION CALL 800-225-5373 ALL SURFACES .000 m MARKED ONLY ANGLES MODELHF659 DLIESTT.S YES NO SHT 2 OF 2 I 8 7 6 5 4 3 2 1