REVISION CF FTS-1XX-XX-XX-XX-XX No OF POSITIONS OPTIONS DO NOT -02 THRU -50 (UNSHROUDED) -P: PICK AND PLACE PAD (USE PPP-25) SCALE FROM -05 THRU -46 (SHROUDED) (AVAILABLE ON POSITIONS 04 THRU 50) THIS PRINT (SEE FIG 5, SHT 2 & FIG 7, SHT 3) (No OF POS x .0500[1.27]) ±.010[0.25] LEAD STYLE (USE PPP-25-NT FOR TAPE & REEL) .050 1.27 REF SEE TABLE 1 -TR: TAPE & REEL PACKAGING (SEE FIG 10, SHT 4) (SEE NOTE 14 & 16) PLATING SPECIFICATION (ONLY AVAILABLE WITH -DV OPTION) 02 50 -L: 10µ" GOLD IN CONTACT AREA, -S: END SHROUDS (SEE FIG 3, SHT 2 & FIG 6 SHT 3) MATTE TIN ON TAIL (LEAD STYLE -02 & -03 ONLY) .135 3.43 -F: 3µ" GOLD IN CONTACT AREA, (05 POS MINIMUM, 46 POS MAXIMUM) REF CL - S : 3M0AµT" TGE OTINLD O INN CTAOILNTACT AREA, A(NLOIGTN AMVEANILTA PBINLE W WITITHH S -HAR OOPUTDIO)N; ORDER -SA FOR MATTE TIN ON TAIL (SEE NOTES 6 & 7) 01 49 -H: 30µ" GOLD IN CONTACT AREA, -SA: END SHROUDS W/ ALIGNMENT PINS 3µ" GOLD ON TAIL (SEE FIG 4, SHT 2 & FIG 8, SHT 3) FTS-XX-DV-XX -SM: 30µ" GOLD IN CONTACT AREA, (LEAD STYLE -02 & -03 ONLY) MATTE TIN ON TAIL (05 POS MINIMUM, 46 POS MAXIMUM) -LM: 10µ" GOLD IN CONTACT AREA, (SEE NOTES 6 & 7) MATTE TIN ON TAIL -A: MOLDED ALIGMENT PIN (USE FTS-XX-DV-XX) -FM: 3µ" GOLD IN CONTACT AREA, (ONLY AVAILABLE IN -DV OPTION, 5 POS MINIMUM) (No OF POS x .0500[1.270]) MATTE TIN ON TAIL (SEE FIG 9, SHT 3) - .0500[1.270] - G : 130µµ" "G GOOLLDD O INN C TAOINLTACT AREA, A(NLOIGTN AMVEANILTA PBINLE A WNIDTH S -HSR OOPUTDIO)N; ORDER -SA FOR .016 0.41 SQ REF (TYP) TAIL OPTION 2 MAX SWAY -D: DOUBLE ROW THROUGH HOLE 2 MAX SWAY (EITHER DIRECTION) .050±.004 1.27±0.10 -DV: DOUBLE ROW VERTICAL SURFACE MOUNT (EITHER DIRECTION) "A" (SEE NOTE 15) .070 1.78 REF (CONTACT AREA) (SEE NOTE 5) .090±.010 2.29±0.25 (SEE NOTE 3) NOTES: 1. C REPRESENTS A CRITICAL DIMENSION. T-1SXX-XX-X .034 0.86 2. PARTS MAY BE CUT TO POSITION. (SEE TABLE 1) REF 3. SHEAR TAILS TO DIMENSION SHOWN. 4. MEASURED AT BEND RADIUS, NOT AT END OF PIN. (SEE NOTE 13) 5. GOLD PLATING TO BE ON POST, TIN PLATING TO BE ON TAIL. 2 MAX SWAY 6. 4 POSITIONS PER ROW WILL BE COVERED BY SHROUDS. (EITHER DIRECTION) (2 POSITIONS PER ROW ON EACH END). FIG 1 7. 4 POSITIONS MUST BE ADDED TO PART CALLOUT TO ALLOW (No OF POS x .0500[1.270]) - .0500[1.270] FTS-1XX-01-XX-D SHOWN FOR SHROUDS, EXAMPLE FTS-125-02-L-D-SA REQUIRES A 29 POSITION BODY. 02 50 8. NOTE DELETED. 9. MINIMUM PUSHOUT FORCE: .5 LB (8 OZ) 10. MAXIMUM CUT FLASH: .015[0.38] 11. PPP-25-NT MUST BE USED FOR ALL TAPE AND REEL PACKAGING. CL 12. FILL BODY SO THAT THE LEAD IN OF THE CORE IS ON THE TAILS SIDE FOR -DV OPTION ONLY. 13. MAXIMUM BURR ALLOWANCE: .003[0.08] 14. POSITIONS -05 THRU -50 TO BE TUBED. POSITIONS -02 THRU -04 ON 01 49 TAIL OPTION -D TO BE LAYER PACKAGED. POSITIONS -02 THRU -04 ON TAIL OPTION -DV TO BE TAPE AND REELED. MAY SUBSTITUTE ASP-61746-05-X .050±.006 1.27±0.15 1165.. FMOARX Q HUEAIGNHTTIT VIEAS RLIEASTSI OTHNA BNE T1W25E EPNIE CROESW, NS:O .0 R0E5E[0L .W13I]L.L BE SUPPLIED. FOR RETENTION PURPOSES FOR -DV STYLE ONLY "B" .050+-..000050 1.27+ 00..1030 90°±3° UDNIMLEESNSS I OONTHSE ARRWEI SINE ISNPCEHCEIFSI.ED, TPHR*OISP DROIECTUAMRYE INNTPF OCRORONMTPAATRIINOIESN TC AAONNRDFY IAD LENLN DOTEIASTLIEG ANN, D * (SEE NOTE 4) TOLERANCES ARE: MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, DECIMALS ANGLES INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE "B" .004[0.10 ...XXXXXX:XX :X :. 0.10. 00[5.03 2[].0 1 3[ .] 0 5 1 ] 2 OROWETRRPH PIRTEAOTRRED PTNUR, CCTOOEOJDE NAC,S NTTE RYINN AUT NA NOSNAFFYUE S RTMARHMAEONDTREN OICZERE,R IDI NWN PCCIE.TORHRSOPOOUNTR O ATRTH EEEDN E ITXNIPT ARYEN NSYOS R 5Pe2H-M0O aPNAilE R: iK8n 1fEo2A@-9SST4 A4B-ML6V7TDE3C3, N. c E oW mF AA X L :B 8A 1cN2oY-d9, 4eIN8 -54557031425720 .230±.010 5.84±0.25 MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: 4:1 DESCRIPTION: .050 X .050 C.L. LOW PROFILE (SEE NOTE 3) INSULATOR: LCP, UL 94 V0, COLOR: BLACK TERMINAL STRIP ASSEMBLY TERMINAL: PHOS BRONZE FIG 2 SEE NOTE 12 SEE NOTE 13 DWG. NO. FTS-1XX-XX-XX-XX-XX FTS-1XX-03-XX-DV SHOWN (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) SECTION "B"-"B" BY: BRATCHER 11/29/1993 SHEET 1 OF 4 F:\DWG\MISC\MKTG\FTS-1XX-XX-XX-XX-XX-MKT.SLDDRW

REVISION CF (No OF POS x .050[1.27]) + .034[0.86] CL .137 3.48 REF (No OF POS x .050[1.27]) + .325[8.26] REF .137 3.48 (No OF POS x .050[1.27]) + .200[5.08] REF CL REF (No OF POS x .050[1.27]) + .034[0.86] .200 5.08 .185 4.70 REF FES REF .115 2.92 FES-A .2625 6.668 .185 4.70 REF .140 3.56 REF .115 2.92 REF REF FIG 3 .140 3.56 -DV-S OPTION (SEE NOTES 6 & 7) FTS-106-02-XX-DV-S SHOWN (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) NOTE: 4 POSITIONS MUST BE ADDED TO PART CALLOUT TO ACHIEVE DIMS (NOT AVAILABLE WITH -A OPTION; ORDER -SA FOR ALIGNMENT PIN WITH SHROUD) .050 1.27 REF .055 1.40 REF (No OF POS x .050[1.27]) + .275[6.99]] {[(No OF POS x .050[1.27]) - .200[5.08]] / 2} ±.020[0.51] .20 5.1 .23 5.8 REF REF "B" REF .130 3.30 PPP-25-NT FIG 4 (USE PPP-25-NT FOR TAPE AND REEL PACKAGING ONLY) -DV-SA OPTION (SEE NOTES 6 & 7) FTS-106-02-XX-DV-SA SHOWN (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) {[(No OF POS x .050[1.27]) - .200[5.08]] / 2} ±.020[0.51] NOTE: 4 POSITIONS MUST BE ADDED TO PART CALLOUT TO ACHIEVE DIMS .20 5.1 REF .130 3.30 REF PPP-25 F:\DWG\MISC\MKTG\FTS-1XX-XX-XX-XX-XX-MKT.SLDDRW * PROPRIETARY NOTE * "B" TPHROISP DROIECTUAMRYE INNTF OCORNMTAATIINOSN C AONNDF IADLELN DTEIASLIG ANN, D REF MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR 520 PARK EAST BLVD, NEW ALBANY, IN 47150 ROETPHREORD PURCOEJDEC, TT RINA NASNFYE RMRAENDN OERR I WNCITOHROPOUTR ATTHEED E IXNP ARENSYS PHONE: 812-944-6733 FAX: 812-948-5047 WRITTEN CONSENT OF SAMTEC, INC. e-Mail info@SAMTEC.com code 55322 DESCRIPTION: .050 X .050 C.L. LOW PROFILE DO NOT SCALE DRAWING TERMINAL STRIP ASSEMBLY FIG 5 DWG. NO. -DV-P OPTION SHEET SCALE: 4:1 FTS-1XX-XX-XX-XX-XX FTS-110-02-XX-DV-P SHOWN (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) BY: BRATCHER 11/29/1993 SHEET 2 OF 4

REVISION CF (No OF POS x .050[1.27]) + .034[0.86] CL .137 3.48 REF (No OF POS x .050[1.27]) + .325[8.26] REF .137 3.48 (No OF POS x .050[1.27]) + .200[5.08] REF CL REF (No OF POS x .050[1.27]) + .034[0.86] .200 5.08 .185 4.70 REF REF FES .2625 6.668 .185 4.70 .115 2.92 REF .115 2.92 REF REF .124 3.15 FES-A REF .124 3.15 FIG 6 -D-S OPTION (SEE NOTES 6 & 7) FTS-106-02-XX-D-S SHOWN (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) NOTE: 4 POSITIONS MUST BE ADDED TO PART CALLOUT TO ACHIEVE DIMS .050 1.27 REF .071 1.80 REF (NOT AVAILABLE WITH -A OPTION; ORDER -SA FOR ALIGNMENT PIN WITH SHROUD) (No OF POS x .050[1.27]) + .275[6.99]] {[(No OF POS x .050[1.27]) - .200[5.08]] / 2} ±.020[0.51] .20 5.1 REF .13 3.3 REF FIG 8 -D-SA OPTION (SEE NOTES 6 & 7) FTS-106-02-XX-D-SA SHOWN FIG 7 (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) -D-P OPTION NOTE: 4 POSITIONS MUST BE ADDED TO PART CALLOUT TO ACHIEVE DIMS "B" REF FTS-110-02-XX-D-P SHOWN (SEE TABLE 3, SHT 2) (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) FTS-XX-DV-XX F:\DWG\MISC\MKTG\FTS-1XX-XX-XX-XX-XX-MKT.SLDDRW * PROPRIETARY NOTE * THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS .050 1.27 REF AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE (No OF POS R- E2F) x .050[1.27] .03R5EF0.89 OROWETRRPH PIRTEAOTRRED PTNUR, CCTOOEOJDE NAC,S NTTE RYINN AUT NA NOSNAFFYUE S RTMARHMAEONDTREN OICZERE,R IDI NWN PCCIE.TORHRSOPOOUNTR O ATRTH EEEDN E ITXNIPT ARYEN NSYOS R 5Pe2H-M0O aPNAilE R: iK8n 1fEo2A@-9SST4 A4B-ML6V7TDE3C3, N. c E oW mF AA X L :B 8A 1cN2oY-d9, 4eIN8 -54557031425720 DESCRIPTION: .050 X .050 C.L. LOW PROFILE FIG 9 DO NOT SCALE DRAWING TERMINAL STRIP ASSEMBLY -A MOLDED ALIGNMENT PIN DWG. NO. FTS-110-02-XX-DV-A SHOWN SHEET SCALE: 4:1 FTS-1XX-XX-XX-XX-XX (ONLY AVAILABLE IN -DV OPTION) (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) BY: BRATCHER 11/29/1993 SHEET 3 OF 4

TUBE PACKAGING VIEW REVISION CF POSITION 1 SEE NOTE 11 -01-D, -02-D, -03-D -D-S(A)-P -DV-S(A)-P SEE NOTE 14 "A" "A" USER DIRECTION OF UNREELING POCKET NOT DETAILED -DV-S(A) -D-S(A) -DV -D-P -DV-P IN PROCESS VIEWS (HANDFILL ONLY) SECTION "A"-"A" "A" - .034[0.86] "A" - .034[0.86] "A" - .034[0.86] (SEE NOTE 15) (SEE NOTE 15) (SEE NOTE 15) FIG 10 -TR: TAPE AND REEL PACKAGING WITH PPP-25-NT PAD .350 8.89 .125±.010 3.18±0.25 NOT AVAILABLE ON THROUGH HOLE LEAD STYLES REF (SEE NOTE 3) .050 1.27 IN PROCESS 2 IN PROCESS 2 W/O -A PINS W/O -A PINS IN PROCESS 1 W/O -A PINS "A" - .084[2.13] "A" - .084[2.13] "A" - .084[2.13] (SEE NOTE 15) (SEE NOTE 15) (SEE NOTE 15) .175±.010 4.45±0.25 .350 8.89 (SEE NOTE 3) REF .100 2.54 IN PROCESS 2 IN PROCESS 3 WITH -A PINS WITH -A PINS IN PROCESS 1 WITH -A PINS TH*IS DOCUMENTP CROONTPARINIES TCAONRFYID ENNOTIATLE AND * PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR 520 PARK EAST BLVD, NEW ALBANY, IN 47150 ROETPHREORD PURCOEJDEC, TT RINA NASNFYE RMRAENDN OERR I WNCITOHROPOUTR ATTHEED E IXNP ARENSYS PHONE: 812-944-6733 FAX: 812-948-5047 WRITTEN CONSENT OF SAMTEC, INC. e-Mail info@SAMTEC.com code 55322 DESCRIPTION: .050 X .050 C.L. LOW PROFILE DO NOT SCALE DRAWING TERMINAL STRIP ASSEMBLY DWG. NO. SHEET SCALE: 2:1 FTS-1XX-XX-XX-XX-XX BY: BRATCHER 11/29/1993 SHEET 4 OF 4 F:\DWG\MISC\MKTG\FTS-1XX-XX-XX-XX-XX-MKT.SLDDRW