Encoders/EVEJB 12 mm Square GS Encoders with Push-on Switch EVEJB Type: Features Thin type encoder with vertical push-on switch Insulated shaft or metal shaft types are available Recommended Applications Volume and tone control for audio/visual and car audio equipment Tuner for communication units Mode selection for measurement instruments Explanation of Part Numbers 1 2 3 4 5 6 7 8 9 10 11 12 Product Code Specifications Combination of Shaft Output (Pulses) & Bushing Rotation Angle 360 ° (Endless) Shaft Pull/Push Strength 80 N min. Mechanical Shaft Wobble 0.7×L/30 mm max. Rotation Torque 3 mN·m to 20 mN·m Detents 20 points Output Signals Phase A and B Resolution 20 pulses/360 ° Rating 1 mA 10 VDC Contact Resistance 1 Ω max. Electrical Chattering 2 ms max. Insulation Resistance 10 MΩ min. (at 50 V DC) Dielectric Withstanding Voltage 50 V AC for 1 minute Bouncing 5 ms max. Type SPST Push-on Rating 20 mA 16 VDC Switch Part Contact Resistance 100 mΩ max. Operating Force 3 N, 6 N Travel 0.4 mm Encoder 30,000 cycles min. Operating Life Switch 15,000 cycles min. Endurance Operating Temperature –10 °C to +60 °C Storage Temperature –40 °C to +85 °C Minimum Quantity/Packing Unit 100 pcs. Polyethylene Bag(Bulk) Quantity/Carton 500 pcs. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 2017.04 industrial.panasonic.com/ac/e/ –1– 　Panasonic Corporation 2017 ANCTB64E 201704-Fd ANCTB55-96E.indb 4 17/04/26 11:15

Encoders/EVEJB Dimensions in mm (not to scale) Standard rotation-torque / Bushing Type with Sleeve / with Switches ..............................................With detents : EVEJBB No. 1 General dimension tolerance : ± 0.5 ( )dimensions are reference dimensions. 5.0 L2L1 SW182.C0.O4M R4.5 0 7. 4 2. 5 1 7. 0.4 3.65 Operation stroke A B Mounting surface Encoder Side Standard rotation-torque / Bushing Type with Sleeve / with Switches ..............................................With detents : EVEJBE No. 2 General dimension tolerance : ± 0.5 ( )dimensions are reference dimensions. L1 12.4 5.0 L2 C0.5 SW8.C0OM R4.5 0 7. 4 2. 5 1 7. 0.3 3.65 Operation stroke A B Mounting surface Encoder Side Shaft Trims and Dimensions in mm Dimensions Shaft Type L1 L1 L2 L3 Corner Cut L2 L3 04.5-0.1 06.0φ-0.1 Metal 15.0 mm 4.0 mm 5.0 mm 0.5 mm 20.0 mm 7.0 mm 6.0 mm 1.5 mm Corner Cut Insulated 25.0 mm 9.0 mm 10.0 mm 1.5 mm Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ –2– 　Panasonic Corporation 2017 ANCTB64E 201704-Fd ANCTB55-96E.indb 5 17/04/26 11:15

Encoders/EVEJB PWB mounting hole for reference Encoder / Switch Circuit 13.2 1.0+10– 5.0 2-2. 2-2+–00.105 ±0. COM S (SWITCH) Center of shaft 5±0.05 7.0 5.0 5-φ1–0+0.1 7.5 A PWB thickness : t=1.6 (ENCODER) B (pitch tolerance : ±0.1) View from mounting side Phase Difference Test Circuit Diagram Detent steady point 5 V DC 10 k 10 k OFF 10 k 10 k Signal A ON Signal A Signal B A B T1 T2 T3 T4 0.01 μF 0.01 μF OFF Encoder Signal B ON CW COM Phase difference T1, T2, T3 , T4 (At rotational speed 60 r/min.) Initial..............3.5 m sec. min. After life........ 2.5 m sec. min. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ –3– 　Panasonic Corporation 2017 ANCTB64E 201704-Fd ANCTB55-96E.indb 6 17/04/26 11:15