Specialty Polymer Aluminum Electrolytic Capacitors/CB Chip Type Specialty Polymer Aluminum Electrolytic Capacitors Japan (SP Cap) CB Series: n Features l Low impedance at high frequency (10kHz to 10MHz) as low as ceramic capacitors (Reduced ESR due to an applying speciality polymer with high conductivity.) l Excellent Noise-absorbent Characteristics l Surface Mount (Reflow soldering method available) l Very stable capacitance, impedance and ESR against temperature l Excellent endurance characteristics due to adoption of solid electrolyte l 4-terminal-construction helps further low impedance. n Specifications Operating Temp. Range —40 to +105ßC Rated W.V. Range 4 to 16V.DC Nominal Cap. Range 2.2 to 82(cid:181)F Capacitance Tolerance –20% (120Hz/+20ßC) DC Leakage Current I<0.04CV or 3 ((cid:181)A) after 2 minutes (Whichever is the greater) (4W.V.:0.06CV) Dissipation Factor <0.06 (120Hz/+20ßC) Surge Voltage Rated Working Voltage · 1.25 (15 to 35ßC) After applying rated working voltage for 1000 hours at +105 ßC, and then being stabilized at +20ßC, capacitor shall meet the following limits. Endurance Capacitance change –10% of initial measured value D.F. <Initial specified value DC leakage current <Initial specified value After storing for 500 hours at +60ßC, 90% R.H. Capacitance change +40%, —20% of initial measured value (4W.V.:+60%, —20% 6.3W.V.:+50%, —20%) Moisture Resistance <Initial specified value D.F. (4W.V.,ECGC(cid:160)(cid:160)B(cid:160)(cid:160)(cid:160)RA:<200 % of Initial specified value) DC leakage current <Initial specified value Permissible Current 2A DC max. (This shall be applicable only when each terminal is landed or the circuit Between Terminals with individually). Same Polarity Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail. — EE225 —

Specialty Polymer Aluminum Electrolytic Capacitors/CB n Explanation of Part Numbers 1 2 3 4 5 6 7 8 9 10 11 12 E C G C (cid:13) (cid:13) B (cid:13) (cid:13) (cid:13) R (cid:13) Product Code Style R.W. Voltage Code Series Code N.Capacitance Code Option ( ) R: Taped on reel(cid:13) (cid:13) n Marking n Dimensions in mm (not to scale) L Cap. Polarity bar (Positive) T C2 D + — A1 A2 B2 B1 D C1 W.V. code W C1 (V) 4 6.3 8 12.5 16 Size code L–0.2 W–0.1 T–0.1 A–0.1 A–0.1 1 2 (W.V. code) g j k B C 7.9 5.3 3.3 1.2 2.2 Size code B–0.1 B–0.1 C–0.2 C–0.1 D–0.1 1 2 1 2 1.5 1.9 1.2 2.4 0 n Standard product Ripple current Rated W.V. Capacitance Impedance (W ) (A r.m.s.) Part number (V.DC) ((cid:181)F) (400kHz/+20ßC) (100kHz/ +20~+105ßC) 15 (150) ECGC0GB150R 0.11 1.3 33 (330) ECGC0GB330R 0.06 1.6 4(0G) 47 (470) ECGC0GB470R 0.05 1.6 68 (680) ECGC0GB680R 0.04 1.6 82 (820) ECGC0GB820RA 0.04 1.6 10 (100) ECGC0JB100R 0.13 1 22 (220) ECGC0JB220R 0.09 1.3 6.3 (0J) 33 (330) ECGC0JB330R 0.06 1.6 47 (470) ECGC0JB470R 0.05 1.6 68 (680) ECGC0JB680RA 0.04 1.6 8.2 (8R2) ECGC0KB8R2R 0.14 1 15 (150) ECGC0KB150R 0.11 1.3 8 (0K) 22 (220) EEFCD0K220R 0.09 1.6 33 (330) ECGC0KB330R 0.06 1.6 47 (470) ECGC0KB470RA 0.05 1.6 4.7 (4R7) ECGC1BB4R7R 0.18 1 10 (100) ECGC1BB100R 0.13 1 12.5 (1B) 15 (150) ECGC1BB150R 0.11 1.3 22 (220) ECGC1BB220R 0.09 1.6 33 (330) EEFCD1B330RA 0.06 1.6 2.2 (2R2) ECGC1CB2R2R 0.38 1 16 (1C) 4.7 (4R7) ECGC1CB4R7R 0.18 1 6.8 (6R8) ECGC1CB6R8R 0.15 1 10 (100) ECGC1CB100R 0.13 1 ( ) shows W.V. and capacitance code. Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail. — EE226 —

Specialty Polymer Aluminum Electrolytic Capacitors/CB n Mounting Specifications. l Recommendable reflow soldering temperature l Typical land pattern (mm) C) 4-terminal 2-terminal mperature on the surface of capacitor(¡ 11225050500000 160 ¡C 120 s PTeimake itne5 m2 s0p0(cid:129)(cid:142)er aotru mreore Peak temperature(¡C) 222222345100000 0 10 20 30 40 50 60(cid:3) 1——.9 1++.6 1.7 min.1.7 min. 5.9 1—.9 1+.6 5.9 Te Time (s) Time in 200 ¡C or more (s) 7.2 7.2 n Packaging Specifications l Reel Dimensions (mm) l Embossed Taping (mm) T W=16mm E Feeding hole Chip pocket C P2P0 fD0 E B B D F W R:1.0 A t Chip component P1 Tape running direction A W t *ECGC(cid:160)(cid:160)B(cid:160)(cid:160)(cid:160)R A B C D E W T t A–0.2 B–0.20 W–0.3 F–0.1 E–0.10 P –0.1 380–250min.13.0–0.521.0–0.82.0–0.5 18–1 24–1 3.0 1 8.4 5.65 16.0 7.5 1.75 8.0 *ECGC(cid:160)(cid:160)B(cid:160)(cid:160)(cid:160)RA A B C D E W T t P–0.1 P–0.1 fD t–0.1 2 0 0 330–250min.13.0–0.521.0–0.82.0–0.5 18–1 24–1 3.0 2.0 4.0 1.5 +0.1 3.6 0 n Packaging Quantity *ECGC(cid:160)(cid:160)B(cid:160)(cid:160)(cid:160)R *ECGC(cid:160)(cid:160)B(cid:160)(cid:160)(cid:160)RA Embossed taping Embossed taping 3000 pcs./reel, 15000 pcs./box 2200 pcs./reel, 11000 pcs./box n Packaging Box Dimensions (mm) x. a m max. 400 5 3 1 400 max. Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail. — EE227 —

MEMO Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail. — EE228 —